Once I have clicked a video the colour of the link no longer changes to let me know I have watched that video; why?
once I have clicked a video, the colour of the link no longer changes to let me know I have watched that video; why?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.
Similar Messages
-
How do I upload photos from a file in Elements to Shutterfly? I've tried selecting the photos and dragging them onto the Shutterfly upload screen, but the operation fails.
Hi mbvc37,
If you want to order print, cards etc. to Shutterfly then please follow below steps.
Order photo prints to Shutterfly.
1. Select images in catalog
2. Go to Create --> Photo Prints.
Order Photobook, Greeting cards to Shutterfly:
1. Select images in catalog
2. Go to Create --> Photobook/Greeting Card etc.
3. Select a template and Order
Please let me know if your expectation is other than this.
Thanks,
Raushan -
My iPhone 5 is faulty as its battery is overheating. I was thinking about taking the phone to an Apple Store for a replacement. Will I get to choose the colour of the phone or will I recieve the same colour?
It might help to think of the Apple Store Genius Bar in the same way that you would think of an auto mechanic's service bay. Imagine that you have towed in a disabled car to have it fixed. When the repair is done, the mechanic hands you the keys to a different model with a different engine and different option package. Great deal right? As I'm sure you can imagine, real life does not work this way.
You will only drive out with the same model that you towed in. If you want a different model, your solution is not in the service department, but on the sales floor. The Apple store is no different. -
How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"
Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz -
Am trying switch from an earlier iPhone to an iPhone4. I have had the Simcard cut to the right size and put it in the iPhone 4 and gone to iTunes. I have clicked on Restore but I get the message that this cannot be done: "unknown error 1604" . What to do now, please?
Thanks, good suggestion, but after trying recommendationsthere I still have the problem of error 1604 happening and no progess.
-
since I updated my system to Mavericks my computer colour is always grey. I have tried to change the colour via system preference without any success. What should I do to so that my screen will be colourful?
Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Drag the image file into the editing window to upload it. You can also include text in the reply. -
How do I get my printer to match the colours of the image as I see it on screen?
How do I get my printer to match the colours of the image as I see it on screen? My HP Office Jet Pro L7680 printer tends to print my images with a bias towards red compared to the image I am seeing on screen with Lightroom 5 using a Mac with Retina 5 screen. Would appreciate any expertise on how to calibrate the printer to the screen
You have two options. The first method costs nothing but is not as accurate and the second means buying hardware and investing some time. The fastest way to get things closer is to download the color profile from the printer manufactures site for the printer and paper combination you are using. Install it on you Mac and relaunch LR. This is best when the paper and printer are both from the same company; in your case, HP. If the paper is not made by HP, you can often find profiles for your paper/printer by going to the paper maker's web site and doing a search for the appropriate profile.
The other alternative is to purchase a piece of hardware such as the ColorMonki which can be used to not only profile your monitor for color balance but also you printer/paper as well as your camera. When all of your devices agree on what color 118,118,118 means, you get the same color from capture to print but this is also an expensive option and there is a lot of time involved in building your own color profiles. The results however, are much more accurate.
Once you have a color profile installed, the next step involves doing soft proofing. Once you have your image looking the way you want it to in LR, open it in the soft proof option. This will show you how your print will look using the color profile for the paper/printer you are using. During the process, you will be shown the print on your screen which may look off. Use the small triangle in the upper-right corner of the histogram to turn on the out-of-gamut warning. This will highlight any parts of your image which contain colors your printer can't handle. Use the rendering intent options to decide how you want these colors handled (relative or perceptual). Check them both and use the one you like best. You can also make additional changes at this point if required before you generate the JPG image. Make sure to save it as a max quality JPG using the sRGP profile. Once saved, you can send this image to your printer or even to a lab as the process is the same.The attached link should get you to a video showing how to use the ColorMunki hardware/software but, more importantly, shows you how to prepare an image for printing (in this case, for a lab) using soft proofing with the color profile created (or downloaded).--Great Color from Your Lab Prints – Every Time! on Vimeo -
Change the colour of the outer line of a circle
Hello everyone,
I drew up a circle with no fill inside, to show where the location of my highway storm culvert will be.
I changed the thickness of the outer line of my circle shape by creating a stroke effect at layer → blending options → stroke; then I changed the thickness of the line by right clicking in stroke at the layers panel and then choosing "scale effect."
But the problem I have is that the outer line is gray, and I want it to be black.
The outer line was originally red though so I changed my image → mode to grayscale, because I couldn't find a way to change the colour while keeping my image in RGB colour. So I've managed to make the outer line gray by changing the image mode but I still can't change the colour of the outer line to black.
I'm sure there must be other ways of changing the outer line colour without having to change the image mode, but I'm clueless.
Here is my drawing:
The text next to the circle says «Obra de desagüe». That's spanish for "drainage construction site."
You see, I can't change the colour because I have no clue at where the "change colour option" is. I tried going to layer → layer properties, but in there there's only 7 colours to choose from. I chose a random colour, just to see what happens and what truly changed colour was the layer, within the layers panel; not the shape contained within the layer.
So I'm lost here, any help please?
Unfortunately I'm still not an expert in Photoshop just yet.
Thank you for reading my post.Set shape layer opacity 100% Fill 0% to make fill transparent or add an empty layer make a circular selection stroke it black.
-
To change the colour of the particular cell of ALV report in Grid display.
Hai Friends,
I have created an Alv report in grid display .In that i want to change the colour of the particular cell.Plz provide the answer with a solved example.
Thank u.This works for a Custom Control and OO ALV in a Dialog Module
TABLES: kna1.
* Data (for the ALV Grid)
TYPES:
BEGIN OF t_alv_data,
cust_id TYPE kunnr, "Customer Number
cust_name TYPE name1_gp, "Customer Name
cust_color TYPE i,
* cell coloring field
color TYPE lvc_t_scol, "Cell coloring
END OF t_alv_data.
DATA:
v_alv_data TYPE t_alv_data,
i_alv_data TYPE STANDARD TABLE OF t_alv_data.
* ALV grid containers and objects
DATA:
o_alv_grid TYPE REF TO cl_gui_alv_grid,
o_alv_cont TYPE REF TO cl_gui_custom_container.
* ALV field catalog
DATA:
i_alv_fc TYPE lvc_t_fcat,
v_alv_fc LIKE lvc_s_fcat.
* ALV Layout (colors)
DATA:
v_alv_layout TYPE lvc_s_layo,
i_alv_color TYPE lvc_t_scol,
v_alv_color TYPE lvc_s_scol,
v_alv_color_cell TYPE lvc_s_colo.
* ALV variant
DATA:
v_alv_variant TYPE disvariant.
PARAMETERS:
p_alvvar TYPE disvariant-variant DEFAULT 'DEFAULT'.
DATA: ok_code LIKE sy-ucomm.
* Class for event handling
* CLASS lcl_event_receiver DEFINITION
* [+] Event listener for the ALV grid
* [+] Handles hotspots and data changes
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
* Hotspot clicking
hotspot_click
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id
e_column_id
es_row_no,
* Data changed (such as checkbox clicking)
handle_data_changed
FOR EVENT data_changed OF cl_gui_alv_grid
IMPORTING er_data_changed.
ENDCLASS. "lcl_event_receiver DEFINITION
* CLASS lcl_event_receiver IMPLEMENTATION
* [+] Implementation of the ALV Grid event handler class
CLASS lcl_event_receiver IMPLEMENTATION.
* METHOD hotspot_click *
* [+] Calls evvent_hotspot_click when a hotspot is clicked in the ALV
METHOD hotspot_click.
PERFORM event_hotspot_click
USING e_row_id
e_column_id.
ENDMETHOD. "hotspot_click
* METHOD handle_data_changed *
* [+] Updates the source data when the data in the ALV display has
* been changed, such as by clicking a checkbox.
METHOD handle_data_changed.
DATA: lv_changed TYPE lvc_s_modi.
LOOP AT er_data_changed->mt_good_cells INTO lv_changed
WHERE fieldname = 'CUST_NAME'.
READ TABLE i_alv_data INTO v_alv_data INDEX lv_changed-row_id.
IF sy-subrc = 0.
MOVE lv_changed-value TO v_alv_data-cust_name.
MODIFY i_alv_data FROM v_alv_data INDEX lv_changed-row_id.
ENDIF.
ENDLOOP.
ENDMETHOD. "handle_data_changed
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
* Reference to the event listener class
DATA: event_receiver TYPE REF TO lcl_event_receiver.
* FORM build_event_listener
* [+] Set the event handler on the ALV Grid
FORM build_event_listener.
* Assigning the event listener to the ALV
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_data_changed FOR o_alv_grid.
SET HANDLER event_receiver->hotspot_click FOR o_alv_grid.
ENDFORM. "build_event_listener
* AT SELECTION-SCREEN
* ON VALUE-REQUEST FOR p_alvvar
* [+] Calls choose_alv_variant to ask the user to select an alv grid
* layout variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_alvvar.
PERFORM choose_alv_variant
CHANGING
p_alvvar
v_alv_variant.
* START_OF_SELECTION
START-OF-SELECTION.
PERFORM get_data.
SET PF-STATUS 'ALVSCREEN' IMMEDIATELY.
CALL SCREEN 2000.
* FORM get_data
* [+] Gets the data for the ALV grid
FORM get_data.
SELECT kunnr name1
INTO (v_alv_data-cust_id,
v_alv_data-cust_name)
FROM kna1.
APPEND v_alv_data TO i_alv_data.
ENDSELECT.
ENDFORM. "get_data
* MODULE build_alv_grid
* THIS SHOULD BE IN THE "PROCESS BEFORE OUTPUT" OF THE ALV SCREEN
* [+] Builds the ALV Grid objects
* [+] Calls to build the field catalog table
* [+] Loads the field catalog table into the ALV Grid
* [+] Loads the table data into the ALV Grid
MODULE build_alv_grid OUTPUT.
SET TITLEBAR '2000'.
* Also enables layout saving
PERFORM set_alv_variant
USING
p_alvvar
CHANGING
v_alv_variant.
* Building the grid and container on the screen
* NOTE: the container name MUST be upper-case
* Also, we don't want the objects to be created if in batch mode!
IF sy-batch IS INITIAL.
CREATE OBJECT o_alv_cont
EXPORTING
container_name = 'O_ALV_TABLE'.
ENDIF.
CREATE OBJECT o_alv_grid
EXPORTING
i_parent = o_alv_cont.
* builds the event listener
PERFORM build_event_listener.
* Color the cells
PERFORM color_cells.
* Build the field catalog
PERFORM build_alv_fc.
* Loads the data into the grid
CALL METHOD o_alv_grid->set_table_for_first_display
EXPORTING
i_save = 'A'
i_default = 'X'
is_variant = v_alv_variant
is_layout = v_alv_layout
CHANGING
it_outtab = i_alv_data
it_fieldcatalog = i_alv_fc.
ENDMODULE. "build_alv_grid OUTPUT
* FORM build_alv_fc
* [+] Constructs the ALV Grid field catalog table
FORM build_alv_fc.
CLEAR i_alv_fc.
REFRESH i_alv_fc.
* NOTE: the field name MUST be upper-case
* field heading hide hot
* name zero spot just
PERFORM:
alv_field USING 'CUST_ID' 'Cust ID' ' ' 'X' 'R',
alv_field USING 'CUST_NAME' 'Customer Name' ' ' ' ' 'L',
alv_field USING 'CUST_COLOR' 'Color' ' ' ' ' 'R'.
ENDFORM. "build_alv_fc
* FORM alv_field
* [+] Describes and constructs a single field for the ALV Grid field
* catalog. The field length and type are both obtained from the
* actual field passed in to this method.
* [+] Adds the constructed field to the ALV Grid field catalog table
FORM alv_field
USING
p_field_name TYPE c
p_heading TYPE c
p_hide_zeros TYPE c
p_hotspot TYPE c
p_justify TYPE c.
CLEAR v_alv_fc.
DATA:
lv_type(1) TYPE c,
lv_length TYPE i,
lv_heading_length TYPE i.
* get the type and length of this field
FIELD-SYMBOLS <field>.
ASSIGN p_field_name TO <field>.
DESCRIBE FIELD <field> TYPE lv_type OUTPUT-LENGTH lv_length.
* re-adjust the length to the length of the header, if too short
lv_heading_length = strlen( p_heading ).
IF lv_length < lv_heading_length.
lv_length = lv_heading_length.
ENDIF.
* NOTE: the field name MUST be upper-case
v_alv_fc-fieldname = p_field_name.
TRANSLATE v_alv_fc-fieldname TO UPPER CASE.
v_alv_fc-inttype = lv_type.
v_alv_fc-outputlen = lv_length.
v_alv_fc-coltext = p_heading.
v_alv_fc-seltext = p_heading.
v_alv_fc-hotspot = p_hotspot.
* Determining which fields should show zeros
IF p_hide_zeros = 'X'.
v_alv_fc-no_zero = 'X'.
v_alv_fc-lzero = ' '.
ELSE.
v_alv_fc-no_zero = ' '.
v_alv_fc-lzero = 'X'.
ENDIF.
v_alv_fc-just = p_justify.
* Add the field to the field catalog
APPEND v_alv_fc TO i_alv_fc.
ENDFORM. "alv_field
* FORM choose_alv_variant
* [+] Shows a popup that allows the user to choose the layout variant
* for the alv grid of the current program
* [+] Usually called by an AT SELECTION-SCREEN method.
FORM choose_alv_variant
CHANGING
p_variant_name TYPE disvariant-variant
p_variant TYPE disvariant.
CLEAR p_variant.
DATA:
p_exit_check(1) TYPE c.
MOVE sy-repid TO p_variant-report.
CALL FUNCTION 'LVC_VARIANT_F4'
EXPORTING
is_variant = p_variant
i_save = 'A'
IMPORTING
e_exit = p_exit_check
es_variant = p_variant
EXCEPTIONS
not_found = 1
OTHERS = 99.
IF sy-subrc = 0.
IF p_exit_check <> 'X'.
p_variant_name = p_variant-variant.
ENDIF.
ENDIF.
ENDFORM. "choose_alv_variant
* FORM set_alv_variant
* [+] Sets the alv grid layout variant. Used for setting the variant
* when its name is entered in a parameter rather than by using the
* popup, or when loading the variant from a variable of type C
FORM set_alv_variant
USING
p_variant_name TYPE disvariant-variant
CHANGING
p_variant TYPE disvariant.
MOVE sy-repid TO p_variant-report.
p_variant-variant = p_variant_name.
ENDFORM. "set_alv_variant
* FORM color_cells
* [+] Loop through the data and apply coloring
FORM color_cells.
DATA:
my_color TYPE i.
* tell the ALV grid what field in v_alv_data contains color information
v_alv_layout-ctab_fname = 'COLOR'.
my_color = 0.
* loop through each row of the table
LOOP AT i_alv_data INTO v_alv_data.
* clear the variables
CLEAR:
v_alv_color,
v_alv_color_cell,
i_alv_color.
REFRESH:
i_alv_color.
v_alv_data-cust_color = my_color.
PERFORM color_cell USING 'CUST_COLOR' my_color. "negative
* apply the colors
* IF v_alv_data-cust_name = 'Testing Credit'.
* PERFORM color_cell USING 'CUST_NAME' 6. "negative
* ELSEIF v_alv_data-cust_name = 'Goober Goober Also'.
* PERFORM color_cell USING 'CUST_NAME' 5. "positive
* ENDIF.
* set the color data for this table row
v_alv_data-color = i_alv_color.
MODIFY i_alv_data FROM v_alv_data.
my_color = my_color + 1.
IF my_color GT 7.
CLEAR my_color.
ENDIF.
ENDLOOP.
ENDFORM. "color_cells
* FORM color_cell
* [+] Colors a cell in the ALV grid
FORM color_cell
USING
p_cellname TYPE c
p_color TYPE i.
CLEAR:
v_alv_color_cell,
v_alv_color.
* set the color for the cell
* IF p_color = 0.
* v_alv_color_cell-col = 0. "cl_gui_resources=>list_col_background.
* ELSEIF p_color = 1.
* v_alv_color_cell-col = 1. "cl_gui_resources=>list_col_heading.
* ELSEIF p_color = 2.
* v_alv_color_cell-col = 2. "cl_gui_resources=>list_col_normal.
* ELSEIF p_color = 3.
* v_alv_color_cell-col = 3. "cl_gui_resources=>list_col_total.
* ELSEIF p_color = 4.
* v_alv_color_cell-col = 4. "cl_gui_resources=>list_col_key.
* ELSEIF p_color = 5.
* v_alv_color_cell-col = 5. "cl_gui_resources=>list_col_positive.
* ELSEIF p_color = 6.
* v_alv_color_cell-col = 6. "cl_gui_resources=>list_col_negative.
* ELSEIF p_color = 7.
* v_alv_color_cell-col = 7. "cl_gui_resources=>list_col_group.
* ENDIF.
v_alv_color_cell-col = p_color.
v_alv_color-nokeycol = 'X'.
v_alv_color-fname = p_cellname.
* v_alv_color-color = p_color.
v_alv_color-color = v_alv_color_cell.
APPEND v_alv_color TO i_alv_color.
ENDFORM. "color_cell
* FORM event_hotspot_click
* [+] What to do when clicking on a hotspot in the ALV Grid
FORM event_hotspot_click
USING
p_row TYPE lvc_s_row
p_column TYPE lvc_s_col.
DATA:
lv_docnum TYPE kunnr.
READ TABLE i_alv_data INTO v_alv_data INDEX p_row-index.
IF p_column = 'CUST_ID'.
* call a transaction when the cust_id is clicked
SET PARAMETER ID 'AUN' FIELD v_alv_data-cust_id.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDIF.
ENDFORM. "event_hotspot_click
*& Module USER_COMMAND_2000 INPUT
* text
MODULE user_command_2000 INPUT.
CASE ok_code.
WHEN 'BACK'
OR 'STOP'
OR 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_2000 INPUT -
How do you change the colour of the text box?
A lot of the text box options seem different for DC. Is there a way to change the colour of the text box that you create/the borders etc.?
In the past, you would just press Ctrl+E and a toolbar would pop up so that you could fiddle w/ the colour of the background etc. This seems to be gone.
Thanks for your help!Hi, Rahul,
Thank you for replying back.
Unfortunately, I have tried what you have suggested and the only thing that I get is a box that says "Properties: No current selection."
Could you please possibly see what it is that I am doing wrong?
I created the text box, wrote whatever inside, clicked somewhere outside the box and then clicked on the text box and I still only get "Properties: No current selection."
Thank you,
Arrom -
Request to techs: Please Darken the colour of the grey text.
Your drab new theme has also appears to have washed out the colour of the text. Please darken it more. Black would be good.
roamPink iTunes
Set 32 bit colour quality.
Right click in the Desktop, select Properties>>Settings
http://support.apple.com/kb/TS2030 -
How can i change the colour of the keys on my mac? is it possible to get them changed?
i was looking at a macbook i was today and it's keys on the keyboard were in a rainbow formation, with different colours. Is there a way to bring mine in to change the colours of the keys? or did i have to order it like that?
Ask the person who owned the computer or do a Google & Bing search.
-
Is it possible to change the colour of the bars in a chart on the iPad?
I'm using keynote for iOS and I'm trying to pick the bar colour for my charts. I understand that the default settings will change the colour for each new series but I have a few charts all with a single series and I would like to change the colours along the way. Below is an image from my presentation, basically I'm looking for guidance on how to make the blue bars into red bars.
Set the grid background color black and set the GridItem background color something else.
Here is an example.it is better to set this kind style attributes in css
<mx:Grid backgroundColor="#000000" verticalGap="0">
<mx:GridRow>
<mx:GridItem backgroundColor="#FFFFFF">
<mx:Label text="Testt"/>
</mx:GridItem>
<mx:GridItem backgroundColor="#FFFFFF">
<mx:Label text="Testt"/>
</mx:GridItem>
<mx:GridItem backgroundColor="#FFFFFF">
<mx:Label text="Testt"/>
</mx:GridItem>
</mx:GridRow>
<mx:GridRow>
<mx:GridItem backgroundColor="#FFFFFF">
<mx:Label text="Testt"/>
</mx:GridItem>
<mx:GridItem backgroundColor="#FFFFFF">
<mx:Label text="Testt"/>
</mx:GridItem>
<mx:GridItem backgroundColor="#FFFFFF">
<mx:Label text="Testt"/>
</mx:GridItem>
</mx:GridRow>
</mx:Grid> -
Change the colour of the tile dynamically:
Hi,
I have 12 tiles in my application. Depending upon some condition, few tiles colour should be changed and also to the same tiles image should be added. (I'm creating tiles using Border)
Can anybody suggest how can I achieve this?
Thanks,
SantoshPlease close your previous threads before you start a new one.
Also, you have asked this very same question before here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/b3752b09-2ee2-46ac-a941-dc7baad78110/change-the-colour-of-the-rectangle-dynamically?forum=wpf#b3752b09-2ee2-46ac-a941-dc7baad78110.
Please don't ask the same question twice.
You could use DataTriggers and/or converters to change the property of some UI element based on some condition as already suggested in the previous thread.
Of course you must post your code, or even better upload a reproducable sample of your issue to OneDrive and post the link to it here, for anyone to be able to provide a specific solution.
But note that the forums are not for anyone else to do the entire work for you. You were given code samples of how to use data triggers and converters in the previous thread. That should certainly give you the idea.
Please remember to close your threads by marking helpful posts as answer and please start a new thread if you have a new question. -
Change the colour of the prompt and the value
Hi,
I have an Item MessageStyledText with some value on an OAF Page.
By default the colour of the Prompt and the value of this Item are black.
But i need to change the Colour to Blue.
Fast response highly appreciated.
Thanks,
Palepu.Approach 1:
Custom Look and Feel - Create your CLAF and change CSS Style.
Limitation - The main limitation of the Custom Look and Feel functionality is that you can only extend Simple LAF or Base LAF, which do not include all the functionality of the Browser LAF (BLAF) or SWAN.
Approach 2:
You can do it programmetically as follows:
import oracle.cabo.style.CSSStyle;
CSSStyle customUnCss = new CSSStyle();
customUnCss.setProperty("text-transform","uppercase");
customUnCss.setProperty("color", "#FF0000");
OAMessageStyledTextBean sampleBean = (OAMessageStyledTextBean) webBean.findChildRecursive("<Id of your messageStyleText will come here>");
if(sampleBean != null)
sampleBean.setInlineStyle(customCss); //set custom css style
You need to provide more details to get more appropriate solution/workaround.
Maybe you are looking for
-
WSDL Files from WAS - Can't see messages
Hi All, I am trying to call a WS on WAS 6.4 from the XI. Following the weblog https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bdee46d-0901-0010-7a9a-b3595d441fbf I merged the 3 files an
-
How do you permanently delete iPhoto pictures in OS X 10.9?
A few months ago we upgraded our 2010 Macbook Pro to the latest software. We moved a bunch of stuff to an external harddrive, reinstalled the disks, and upgraded it. When we deleted pictures off of it then, you went to the pictures folder and delet
-
Re: values returned by select in Oracle 8.
-
Workflow not trigerring for BO : ZFIPP ( FIPP )
Hello Fiends , I have an issue with the Workflow not getting triggered. The setup is working fine on development system , but not on test system. Have created a custom BO : ZFIPP for FIPP and workflow template for FIPP - create and change event. The
-
Do I have to use itune to download music?
I have not clue what to do. I just got it last night. I tryed to put songs on from my window meda player but the songs don't appear on the stupid ipod.