Change Capitalization For Many Cells at Once

How can I change the captialization for many table cells at once. I can do it for one cell at a time by triple-clicking an choosing the capitalization menu within fonts, but if I select all the cells I want to change and then go to fonts>capitalization, the capitalization menu is dimmed.
thanks,
Jeff

I'm a little confused by this thread. As Badunit describes, can't you just select multiple cells and make a menu pick?
No need for formulas, right? (unless it's a special situation of capitalizing the start of each sentence)
SG

Similar Messages

Change Package For Many Bi Objects

Dear Gurus,
Before transformation, Is there any way to change package for many bi objects ?
Transport Coonection tab dont allow me to change package of these bi objects?
Cheers,

In the transport connection screen select the object -->send it RHS --> before changing the package make sure that object is not in any of the Transport request if so release the request using the Tcode :se09 and now select the object in the transport screen click on change package it will prompt a window where you can update the package and create TR for it.

How to change pkg from $tmp for many objects at once during transport req

I know to change package name for objects one by one. but i want to change for some 30 objects at the same time. i tried to select all and do , but it changed only for the first one. how to do this?

You can either change using TADIR table.
Or
In SE09, collect al your objects in a transport .
Then click on Objects --> Object directory entry and change the package.
Or in SE01 also you have an option to change package.

How do I change permissions on many files at once?

Hello!
I recently had a large hard drive crash, and, long story short, I got all my data back but now have a different user account on a new hard drive. The permissions on all the files on the computer are fine.
However, I am a recently graduated film student and use an external drive to edit video. When I tried to open up Final Cut Pro and work on a project, I was told that the program couldn't work because I didn't have "write" access to my scratch drives. I changed the permissions on the relevant folders and can now open the application fine, but can't actually edit because ALL the medi files don't give me full read/write access.
I can change them all one at a time, which requires I enter my password for each one, but this would take a few days of work to complete.
My question is: how can I add my user account with read/write permission to many files at once? I've heard this can be done with Terminal, but I'm not sure how.
Please give me step-by-step instructions if you can! I have never used Terminal before! I am not a techie, but I want to be, and I learn quickly!
My computer specs:
15in Macbook Pro, early 2008.
System 10.5.8

In the Finder's Get Info window, under permissions, you can click the little gear icon and set the "Apply to encoded items" flag. Then when you change permissions, it will apply to everything underneath the selected folder.

JTable changing borders for table cells

Hi,
I have a JTable which has columns which each represent a month for a
specified time period. For example, my table displays rows containing numeric data for March 1998 - April 2002.
I would like to create a Raised Cell for the numeric data for the first
cell in the time series and a raised cell everytime the numeric data
is under the column for January of the new year. For example,
the cell containing the data under March 1998 column should be raised and the cells containing the data for January 1999,2000,2001,2002 should be raised.
(FYI: I am using a TableModel which extends the AbstractTableModel)
Many Thanks in advance,
Alex

You need to create a custom table cell renderer to do what you are asking. It is what actually draws the cells. Just subclass the DefaultTableCellRenderer and override the getTableCellRendererComponent() method. Look at the source for that class, and just change it to add your logic to use a different border depending on the cell to be drawn.

Conditional Formatting - change color for matching cell

I have two sheets, Sheet1 and Sheet2.
Sheet1 contains the following data:
abc
def
ghi
jkl
mno
pqr
stu
vwx
yz
Sheet2 contains the following:
abc
ghi
jkl
mno
pqr
yz
I want to apply conditional formatting in Sheet1 for matches in Sheet2, so that for each match, the cell's fill color is changed to, say green.
I select the entire range in Sheet1 and as a New Formatting Rule, choose Cell Value equal to = Sheet2!$A$2:$A$6
However, this throws the following error:
"This type of reference cannot be used in a Conditional Formatting formula.
Change the reference to a single cell, or use the reference with a worksheet function, such as =SUM(A1:E5)"
Any help here is greatly appreciated. Thanks.

Use the formula:
=ISNUMBER(MATCH(A1,Sheet2!$A$1:$A$6,0))

How do I change borders for a cell?

Changing borders seems so easy. I select a cell, select a line type, select a color, select to underline a cell. Problem: It outlines the entire cell! I've tried it a hundred times, but it doesn't change. I must be missing something very simple...

carlfrommichigancity wrote:
Changing borders seems so easy. I select a cell, select a line type, select a color, select to underline a cell. Problem: It outlines the entire cell! I've tried it a hundred times, but it doesn't change. I must be missing something very simple...
Carl,
Do all that, then click off the table to apply the changes. By the way, and I may not need to say this, there is no Underline option. The closest thing is to apply a border style to the lower boundary of the selection.
Jerry

Change info for multiple videos at once

I am a mac newb, just got my mac book pro and am trying to learn and get things set up. I have my media on a NAS (Qnap 451) and have added my existing videos to my library (without copying them locally to my library), and of course they show up as home videos. I know how you are supposed to change the
info for multiple files, I select them all and choose get info and change the options tab to Movie. When I do that nothing happens at all, I can do the files one at a time and they change fine, but if I even select just two files it doesn't work. Any ideas?

Well an update in case any one else had this issue. I don't know why but it only works if I choose Movie, then before choosing OK I switch to a different tab like the artwork tab and then back to the options tab. No idea why that would have any effect on it.

Changing NOTES for entire group at once?

Is there a way to change the NOTE field in all contacts in a group (not smart group) at one time instead of doing each one?

Open up Applescript Editor.
Paste in this codetell application "Address Book"
repeat with aPerson in people of group "Test Group"
set note of aPerson to "note text"
end repeat
save
end tellReplace Test Group with your group name. Replace note text with the text you want in the notes. click the Green triangle button.
If you want to append the "note text" to the current note, change that line toset note of aPerson to note of aPerson & return & "note text"

Has Lightroom CC removed the ability to Batch apply changes to many files at once (after import) using presets?

I've just upgraded to Lightroom CC and most of the changes are very welcome - especially the performance improvements.
However I've been processing several thousand images and in Lightroom 5 when wanting to apply changes to many images at once it was as simple as selecting the group of images and then right clicking, selecting Develop Settings and then selecting one of my many Presets from a sub menu.
This sub menu seems to have disappeared in Lightroom CC.
This is a MASSIVE problem for me as I cannot work out how to apply the presets to multiple images anymore.   I note that there is a tutorial on how to do it during import - but I want to specifically be able to do it post import, during development of large groups of images for clients.
Anyone know what has happened here and how we can get access to applying presets to multiple images during development under Lightroom CC?

Yes ssprengel.
I regularly work with all the Presets visible in the left of the Develop module.   But this cannot be used to apply the preset to multiple images.   For that (in Lightroom 5) you had to select the multiple images and then right click (on any one of the images) then go down the menu to Develop Settings, then select the Preset Folder and the Preset you wished to apply to all the images selected.   This worked well for me in my workflow.   But the access to the Presets through the Develop Settings menu has been removed in Lightroom CC.   ManiacJoe's solution above works - but it's accessed from the Library module.   That's kind of counter intuitive.   I want access to apply any preset I've saved to multiple images (in many cases t's being applied to thousands of images) from within the Develop module.   it makes little sense to apply a preset one image at a time to thousands of images when developing them
The whole idea behind presets was that they could be quickly and consistently applied across multiple images.   Removing this functionality is a backward step by ADOBE in my opinion and I really want them to add it back to the Develop Module menu systems.

Highlight Changed Cells - Too many cells (no named range)?

Hello,
I implemented the Highlight Changed Cells Function as described in the How-To-Paper from Gerd Schoeffl (How To...Highlight Changed Cells in SAP BusinessObjects Analysis for Office).
In my workbook I have two tabs with different crosstabs. I noticed that the highlighting function only works for one of them and that there is a warning for the other one: "There is no named range for Crosstab1". In the coding I saw that the error message is put out by the Highlighting Changed Cells subs but I am not sure why the problem occurs (I could not find out at which point of the runtime the error occurs, even when I tried debugging it).
When I restrict the selection to less cells it works for the same crosstab. Therefore I would assume that there are simply too many cells for the function to work, is that possible? And if so, has anybody found a solution? In the crosstab there are 376 rows and 21 columns...
This is the code that contains the error message:
Sub createMapInitial(CrossTabName As String)
    Dim map As Object
    Dim cross As Range
    Dim Cell As Variant
    Set map = CreateObject("Scripting.Dictionary")
    On Error GoTo RangeNotFound
    Set cross = Range("SAP" + CrossTabName)
    Dim RowSel As Object
    Dim ColSel As Object
    Dim rowkey As Variant
    Dim colkey As Variant
    Dim keyMap As String
' delete the last selection tables
    If Not RowSel Is Nothing Then
        Set RowSel = Nothing
    End If
    If Not ColSel Is Nothing Then
        Set ColSel = Nothing
    End If
    Set RowSel = CreateObject("Scripting.Dictionary")
    Set ColSel = CreateObject("Scripting.Dictionary")
    Call FillSelTabs(CrossTabName, RowSel, ColSel)
    For Each Cell In cross
        If isDataCell(Cell) = True Then
            rowkey = RowSel.Item(Cell.row)
            colkey = ColSel.Item(Cell.column)
            keyMap = rowkey + colkey
            Call map.Add(keyMap, Cell.value)
        End If
    Next
    Call MapCollection.Add(CrossTabName, map)
    On Error GoTo 0
    Exit Sub
RangeNotFound:
    Dim text As String
    text = "There is no named range for " + CrossTabName
    Call Application.Run("SAPAddMessage", text)
    On Error GoTo 0
End Sub
Thanks, Jan

Hi Werner,
I disabled the OnError handling which gave me some progress:
Now when I switch on the Highlight Changes function I receive this error message:
When I click Debug it takes me to the following part of the "update MAP and compare" sub (code will be posted below):
From my understanding in this step a key is created that consists of an identifiert (the first big string) and the elements of the selection of the data source (e.g. 27 is the region, 1144 the plant number). The smallest unit in our case is the plan and we don't have the same plant number twice in our selection, therefore the key should be unique.
When I remove the plant from my selection by filtering suddenly the Highlight Changes function works again. So it seems that this plant causes the problem but I don't really understand why. Does anybod have an idea?
Here the missing code of update map and compare (same as in the How To Paper):
Public Sub updateMapAndCompare(CrossTabName As String) ' when called the first time, the before status must be kept - and no delta is possible
    If MapCollection Is Nothing Then
        Set MapCollection = CreateObject("Scripting.Dictionary")
    End If
' do we have information about the current crosstab already?
    Dim isNewMap As Boolean
    isNewMap = Not MapCollection.exists(CrossTabName)
    If isNewMap = True Then
        Call createMapInitial(CrossTabName)
        Exit Sub
    End If
    Dim isNewDataCell As Boolean
    Dim isChangedDataCell As Boolean
    Dim keyMap As String
    Dim sel As Variant
    Dim map As Object
    Dim newMap As Object
    Set newMap = CreateObject("Scripting.Dictionary")
    Dim Cell As Variant
    Dim cross As Range
    'On Error GoTo RangeNotFound
    Set cross = Range("SAP" + CrossTabName)
' get the correct comparison table
    Set map = MapCollection.Item(CrossTabName)
    Dim RowSel As Object
    Dim ColSel As Object
    Dim rowkey As Variant
    Dim colkey As Variant
' delete the last selection tables
    If Not RowSel Is Nothing Then
        Set RowSel = Nothing
    End If
    If Not ColSel Is Nothing Then
        Set ColSel = Nothing
    End If
    Set RowSel = CreateObject("Scripting.Dictionary")
    Set ColSel = CreateObject("Scripting.Dictionary")
    Call FillSelTabs(CrossTabName, RowSel, ColSel)
    For Each Cell In cross
        If isDataCell(Cell) = True Then
        ' task1: build up new before status - as reference for next comparison
            rowkey = RowSel.Item(Cell.row)
            colkey = ColSel.Item(Cell.column)
            keyMap = rowkey + colkey
            Call newMap.Add(keyMap, Cell.value)
        ' task2: check if cell values has changed or newly occured
            isNewDataCell = Not map.exists(keyMap)
            If isNewDataCell = True Then
                'Cell.Style = C_STYLE_NEW
            Else
                isChangedDataCell = (map.Item(keyMap) <> Cell.value)
                    If isChangedDataCell = True Then Cell.Style = C_STYLE_CHANGED
                    End If
            End If
    Next
' update the MapCollection
    Set MapCollection(CrossTabName) = newMap
    'On Error GoTo 0
        Exit Sub
RangeNotFound:
    Dim text As String
    text = "There is no named range for " + CrossTabName
    Call Application.Run("SAPAddMessage", text)
    'On Error GoTo 0
End Sub

Why do borders for some cells allow changes in line thickness, but other cells are locked in only one thickness?

It looks like you should be able to choose different line thickness for cell borders, but for some cells you can get three choices (0.5, 1, 2 pt), but in other cases you can only do 0.5?
I can't make a consistent thickness border around the outside of all my cells!

VS,
Yes, I have lots of ideas. After all that work you probably don't want to hear them.
1. I would use PDF versions of rotated text boxes, inserted into the cells as background Fill rather than floating the actual text boxes over the table.
2. I would never merge a cell, or divide, a cell. Too many problems await you down the road if you do that. There are many ways in Numbers to avoid having to do those things. These are things we must do in Excel to get by, but we don't have to do them in Numbers.
3. There is a Line Type called "Thin" that has only one size, and another line type shown as a heavier solid for which the weight can be adjusted. It's possible that you have some places where you need to change the line type.
I believe that your difficulty may come from the merging of cells causing some ambiguity as to which border needs to be selected to change the display. This would be a bug, because you should be able to just select the border and edit it, but your table may have become so complex that the program has lost track of things in the course of all your changes.
My suggestion is to print your table just as it is, for reference, and start over in a new document, not an imported one. Don't merge or split. Use multiple simple tables and the occasional text box for annotation. You will be on your way to doing things the "Numbers Way".
Jerry

How to disable updates and hide set as default browser option in firefox 31.0 for many users,like changing the setttings in any file

Hi,
I am trying to disable updates, set as default browser option and import settings from other browers permanently for many users for firefox 31.0.
can you please help me with that. I know settings are going to prefs.js file in user profile. How can make this permanent for many users.

Hi gaurav3012,
Permanent change would be locking preferences: [http://kb.mozillazine.org/Locking_preferences]
However importing many users profiles to different computers may require a new profile for each user.
Currently there is an option to import bookmarks from other browsers, but not preferences.
Update preferences can be read about here: [[Configuration Options for Updates]]
Firefox ESR is also another version of Firefox that is meant for Enterprise environments [https://www.mozilla.org/en-US/firefox/organizations/] that mostly has their support on their mailing list.

Pegging relation for stock got lost once we do changes to the SNP planned order.

Hello Experts,
Pegging relation for stock got lost once we do changes to the SNP planned order.
We are using a BAPI "BAPI_MOSRVAPS_CREATESNPORDER" to make changes to the planned order as per our business requirement.
However after changes the pegging relation got lost.
Please help, why and how to solve this.

Dear Krish,
While creating orders using BAPI pegging relationship will be lost.
Could you be more clear which orders you are creating?
Some times dynamic pegging is possible.
Regarding pegging relationship please check the link, it may help you.
Pegging - SAP Library

Changing scaling factor for each cell in Bex Analyzer

Hi,
We have a query with 2 structure (1 structure in rows, 1 in columns). We execute the query with Bex Analyzer in Excel.
We would like to change the scaling factor for each cell. If we use the function 'Properties' for the active cell (context menu), we can change the scaling factor only for one cell.
Is it possible to change it for the complete table?
We use BI 7.0, patch 14.
Thanks,
Peter
Edited by: Péter Egyedi on Jan 25, 2008 5:18 PM

Have you got the solution for this problem?

Change Capitalization For Many Cells at Once

Similar Messages

Maybe you are looking for