Change char set for db

Hi,
,is there a way to change the char set of the database?
i have to apply AL32UTF8 charset for installing content db. but my db has another charset.
what can i do?
Regards
Ceren

Yes you can create a datbase which supports Japenese character set.
The CREATE DATABASE statement has the CHARACTER SET clause and the additional optional NATIONAL CHARACTER SET to declare the character set to be used as the database character set and the national character ser. If no national character set clause is present, the national character set default to AL16UTF16.
You can use approprite NLS charcter while creating database.

Similar Messages

  • I no longer want to merge my work laptop with my icloud account on other devices.  How can I change the setting for the laptop?

    I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate.  How can I change the setting for the PC at work?

    Sign out of iCloud.

  • How do i change my setting for my fax on my hp officejet 6500 E710n-z

    I cannot get a fax without being home to accept it
    How do i change my setting for my fax on my hp officejet 6500 E710n-z, so that I can accept faxes no matter I am home or not please?
    thank you
    cookiez

    Hi cookiesz219,
    I found this in the user guide for HP Officejet E710n-z available here: http://h10032.www1.hp.com/ctg/Manual/c02519721.pdf
    Could you try:
    1. On the printer control panel, touch > Setup, then touch Fax Setup then Basic Fax Setup
    2. Turn on Auto Answer
    3. Set Rings to Answer to the number of rings.
    I hope this helps.
    I work for HP.

  • Mass Change of Sets for Report Painter/Writer Reports

    Hi,
    We have upgraded our system from 4.6c to ECC 6.0. We are using more
    than 40 Report Painter/Writer reports which in turn are using Sets.
    However, these sets are containing reference to a Table which we want
    to change for all the set enmasse. e.g. If currently the sets are using
    Table Reference "ABC", we want to change it to "XYZ" because the
    table "ABC" is not at all existing in our new system ECC 6.0.
    Even we are unable to change the sets through T.Code GS02 as the table
    itself is not existing. And as the table is not existing, the Reports
    are giving hard errors saying that the sets do not exist.
    Kindly request you to guide us in this regard.
    Thanks in advance,
    Shalin Shah

    Looks like you have to create new sets and assign them in the report replacing the old ones.

  • Change default setting for edit panel button.

    In Elements 10 the default setting for the Edit panel button is expanded. I had it contracted which put it in the panel bin. That gave me a narrower panel bin and more editor workspace. After resetting the panels I am having trouble figuring out how to contract it back like it was. Does anyone know how to do this or have any ideas?

    It seems that not having the (Full, Quick, and Guided) buttons in an (Edit panel) makes the panel bin wider. I had a narrow bin like in photodrawken's picture at one time. I can change the size of a panel by grabbing the line at the edge. But not the bin width. Was it a fluke that I had a Edit panel?

  • Change default setting for files...

    Is there a way to change the default setting for raster effects to 300ppi instead of 72ppi? And is there also a way to have "Align New Objects to Pixel Grid" unchecked by default? I do realize I can change all of these settings either when I create a file or after, but I would like to have them be my defaults. I'm running Illustrator CC on Windows 7. Thanks!

    Create your own New document profile that contains these settings
    http://blogs.adobe.com/adobeillustrator/2009/05/startup_profiles_a_great_tool.html

  • Change default setting for search highlight?

    Is it possible to keep the highlight feature in the search (RH 7) enabled, but change the default for the Highlight search results box to be unchecked?

    If you enable highlighting, the box the end user has is selected by default and you cannot change that. If you want that option added in a future version, submit a feature request.
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    See www.grainge.org for RoboHelp and Authoring tips

  • Change default setting for "Repeat All Songs on Album"

    It seems that the default setting for my iPod Touch is to play all songs on the album, then repeat at track one of the same album. It is easy enough to shut this option off while playing the music, but I was wondering if there was a way to set the default setting, so instead of always assuming I want to repeat all tracks on the album (I seldom or never do) the default setting will be to just play the album one time through.

    Repeat (and Shuffle) always stays how you last set it. You're either touching the button by mistake, or perhaps you need to reset (or restore) the Touch.
    Another thought ... if you plug the Touch into an accessory such as a car with an iPod interface, sometimes that puts the Touch into Repeat mode (my Honda does that). Are you doing something like this?

  • How to change calendar setting for one event in a repeating series?

    Is there any way to change the calendar setting (color) for a single event in a repeating series without changing the color of all events in that series? It seems one event in a repeating series is linked to all other events in that series even if you change the time and/or date first.
    The only workaround I've found is to create a new event Identical to the event in question except with the different calendar, then delete the original event. This would be a lot easier if the OS would ask the user if s/he wants to apply the calendar change to all future events or just this one. Or if there was a way to more easily duplicate a single event, that would also save me a lot of time.
    Thanks for any responses.

    The assignment of colors to calendars on your iPad is pretty simplistic. You can set a color for each calendar and all events (repeating or single instance) placed in a calendar use the calendar's color; however, you cannot set a color for one instance of a calendar event. The workaround you came up with is similar to the method I use. I have a calendar labeled "Priority Events" (Red) that I use for important instances of standing meetings. Oftentimes I leave the event in question in the calendar and simply place a priority event in the same time slot; it clutters up the calendar a bit but helps me visually.

  • Cannot change synchronize setting for contacts!

    Hello!
    I have 2 emails set up on my BB curve 8520. When i added contacts i somehow added some to sync on one email and some on the other. Now when i sync to microsoft oulook it only adds contacts from one e-mail. I tried to edit the sync option on my contacts but it wont allow me to make that change. It would like to avoid having to re edit all those numbers. If i could have microsoft outlook sync the contacts from my other email that would be much easier. Thanks, TZ.

    Hello dreamfarm and welcome to the BlackBerry® Support Community Forums.
    Sorry to hear you are having issues with your Contacts on your BlackBerry® Torch™ 9800 smartphone.
    Did you add an email account with wireless contact synchronization recently?
    Where you see the CICAL, CMIME and SYNC do you see the same email account listed? 
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • How to set or change character set for Oracle 10 XE

    Installing via RPM on Linux.
    I need to have my database set to use UTF8 and WE8ISO8859P15 as the character set and national character set. (Think those are in the right order. If not, it's the opposite.)
    If I do a standard "yum localinstall rpm-file-name," it installs Oracle. I then run the "/etc/init.d/oracle-xe configure" command to set my ports.
    Every time I do this, I end up with AL32/AL16 character sets.
    I finally hardcoded ISO-8859-15 as the Linux 'locale' character set and set this in the various bash profile config files. Now, I end up with WE8MSWIN1252 as the character set and AL16UTF16 as the national character set.
    I've tried editing the createdb.sh script to hard code the character set types and then copied that file over the original while the RPM is still installing. I've tried editing the nls_lang.sh script to hard code the settings there and copied over the original shell script while the RPM is still installing.
    Doesn't matter.
    HOW can I do this? If I wait until after the RPM is installed and try running the createdb.sh file, then it ends up creating a database but not doing everything properly. I end up missing pfiles or spfiles. Various errors crop up.
    If I try to change them from the sql command line, I am told that the new character set must be a superset of the old one. It fails.
    I'm new to Oracle, so I'm treading water that's uncharted. In short, I need community help. It's important to the app I'm running and attempting to migrate from to maintain these character sets.
    Thanks.

    I don't think you can change Oracle XE character set. When downloading Oracle XE you must choose to download:
    - either the Universal Edition using AL32UTF8
    - or the Western Euopean Edition using WE8MSWIN1252.
    See http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm#BABJACJJ
    If you really need UTF8 instead of AL32UTF8 you need to use Oracle Standard Edition or Oracle Entreprise Edition:
    these editions allow to select database character set at database creation time which is not really possible with Oracle XE
    Note that changing environment variable NLS_LANG has nothing to do with changing database character set:
    http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm#BABBGFIC

  • Function to change character set for specific text

    Hi all,
    there is any function that i can use to change specific character from AL16UTF16 character set to UTF8 character set,
    there is any such a function in oracle doing this ..
    Thanks in advance
    Ahmed,

    HI Elic,
    The things is my CharacterSet is AR8MSWIN1256
    and i want to convert it to unicode character set that supported arabic
    can you please tell me ,
    ahmed

  • Change default setting for ADD TEXT

    90%+ of the time I am adding a text box to a PDF file it is to add a comment reflecting the payment information on a bill I have paid.  I'd like to be able to change the DEFAULT settings for color, size and font.  I've not been able to find where that is possible.

    Create your own New document profile that contains these settings
    http://blogs.adobe.com/adobeillustrator/2009/05/startup_profiles_a_great_tool.html

  • How can i change the setting for audio-video for my face time to built in only so i can have my skype camera ?

    Good evening,
    The last few days my I lost the ability on Skype to be seen by the other party ... I can see them but they cannot see me. At the same time my Face Time sent me some messages error.
    When I open my Skype and go to Preference and go to audio/video I see my image ... and when I go back to make a call the camera is off (no light). When I look at the bottom where I can have a drop  down arrow I have Face Time (built in).
    On my other Macpro  (that work well) I have at the same place  built-in only.
    Cannot change anything on my MacBook air ... no drop in.
    Please Help and thank you !

    There are no settings for video resolution or frame rate.
    Regarding iOS developer policies:
    https://developer.apple.com/devcenter/ios/index.action

  • Why can I not change the setting for my iPhone 4s to stop making a woosh sound when I send txts?

    They should have an option under settings to turn this off, but they do not. It is not right to have to turn my iPhone on silent just to get away from it.

    This seems to have been asked a lot around the net, however, there doesn't seem to be an adequate answer to it.
    I am running:
    Operating system is Windows 7Motherboard is Q67H2-AM v1.1
    Bios is ACER ver. 2.10.1207
    GPU is GTX 770
    PSU is 700w
    The Graphics card is plugged in to the 16x slot, the fans spin, but no display and no device is recognized in device manager.
    I have tried a few solutions including uninstalling my onboard graphics driver from the device manager and going to upgrade my 600w power supply to a 700w one.
    I think the issue is that I need to change the BIOS to PEG or PCI Express. However, in the Bios the settings for both "Primary Video" and "Onboard Graphics" are grayed out, meaning that I can't change them.

Maybe you are looking for