Change columns from header to normal

I don't want the first column to be headers (dark grey).
Only way I found was to uses a pop-up in the inspector to reduce the number of header columns. But this in essence deletes from the left. So what if I already entered some data? I can copy and paste, but then I still have to set the font to non-bold.

Correct. The conversion is available, but only in one direction—the leftmost regular column may be converted TO a header column, the topmost regular row may be converted TO a header row, to a maximum of five in each case.
For your situation (one header column that you want to replace with a regular column), you can do the whole table replacement described by Wayne, or you could replace only the single column:
Click on any cell in column B to select it. Press option-left arrow to Add a Column before column B.
Click on the Column A reference tab to Select the whole column. Copy.
Click on cell B1 (in the new column B).
Go Edit > Paste and Match Style.
Click on any cell in column A.
Go Table > Delete Column.
Works fine IF the table contains no formulas that referenced cells in column A. Any such formulas will now show a REF error, and will need to be reconstructed to correct the cell references to the new column A.
You can get past this issue by formatting any cells containing column A cll references as Text before deleting column A, then changing their format back to Automatic (or whatever setting you had previously) after column A is deleted.
Regards,
Barry

Similar Messages

Select row and column from header in jtable

hello i have a problem to select row and column from header in jtable..
can somebody give me an idea on how to write the program on it.

Hi Vicky Liu,
Thank you for your reply. I'm sorry for not clear question.
Answer for your question:
1. First value of Open is item fiels in Dataset2 and this value only for first month (january). But for other month Open value get from Close in previous month.
* I have 2 Dataset , Dataset1 is all data for show in my report. Dataset2 is only first Open for first month
2. the picture for detail of my report
Detail for Red number:
1. tb_Open -> tb_Close in previous month but first month from item field in Dataset2
espression =FormatNumber(Code.GetOpening(Fields!month.Value,First(Fields!open.Value, "Dataset2")))
2. tb_TOTAL1 group on item_part = 1
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)))
3. tb_TOTAL2 group on item_part = 3 or item_part = 4
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)) + ReportItems!tb_TOTAL1.Value )
4. tb_TOTAL3 group on item_part = 2
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)) - ReportItems!tb_TOTAL2 .Value)
5. tb_Close -> calculate from tb_TOTAL3 - tb_Open
expression =FormatNumber(Code.GetClosing(ReportItems!tb_TOTAL3.Value,ReportItems!tb_Open.Value))
I want to calculate the value of tb_Open and tb_Close. I try to use custom code for calculate them. tb_close is correct but tb_Open is not correct that show value = 0 .
My custom code:
Dim Shared prev_close As Double
Dim Shared now_close As Double
Dim Shared now_open As Double
Public Function GetClosing(TOTAL3 as Double,NowOpening as Double)
    now_close = TOTAL3 + NowOpening
    prev_close = now_close
    Return now_close
End Function
Public Function GetOpening(Month as String,NowOpen as Double)
    If Month = "1" Then
        now_open = NowOpen
    Else
        now_open = prev_close
    End If
    Return now_open
End Function
Thanks alot for your help!
Regards
Panda A

Changing columns from english to Mandarian Language

Hi,
As of now i created a script form in english and now my requirement was to change those column headings to Mandarian language.Could anyone please help me on how to work on this?
Thanks,
Priya.

use the transaction SE63
http://help.sap.com/saphelp_sm310/helpdata/en/b4/54601d77f38e429ffad9e3e11c1b25/content.htm
http://help.sap.com/saphelp_sm310/helpdata/en/41/71601b3ab0f34a8e00aa01338c68f3/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/transport-of-translations-se63-383226
http://sap.ittoolbox.com/groups/technical-functional/sap-abap/se63-generate-change-request-for-translations-2253377

How to change column name heading thru Class method in ALV report

When I Select LayOut on Selection screen then Display ALV Output columnname display Quantity but I want change this name to Carats.
I set Short, Medium and Long text is Carats.

DATA: lt_fcat    type lvc_t_fcat,
          lv_fname type fieldname value '<Your FName>'.
FIELD-SYMBOLS: <fcat> type lvc_s_fcat.
CALL METHOD alv_grid->get_frontend_fieldcatalog
   IMPORTING
       et_fieldcatalog = lt_fcat.
read table lt_fcat assigning <fcat> with key fieldname = lv_fname.
if sy-subrc is initial.
   <fcat>-COLTEXT = <fcat>-SCRTEXT_L = <fcat>-SCRTEXT_M = <fcat>-SCRTEXT_S = <fcat>-SELTEXT = '<Your new Description>'.
endif.
CALL METHOD alv_grid->set_frontend_fieldcatalog
   EXPORTING
       it_fieldcatalog = lt_fcat.
call method alv_grid->REFRESH_TABLE_DISPLAY.

Change column from CHAR(1) to NUMBER(6)

Hi,
I have to tables referenced by

see my reply in this tread
<a id="jive-thread-3" href="thread.jspa?threadID=432846&tstart=0"
>Please help me</a>
<br>
hope that helps

Changing FROM header during Forwarding from PSTN to PSTN

Hi,
Is there a possibility to change the FROM header in INVITE message:
1. calling from PSTN network to lync user
2. user got call forwarding to PSTN number set
that the FROM header got user's number?
Lync is 2013 with newest update.

You can work with the caller id a bit in the trunk rules, but likely you'll want an SBC to do anything more sophisticated.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.

The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.
All was normal until the icon for the disk stopped showing up on the desktop when I would plug it in. I rebooted the computer, and the disk icon now shows up but this new look to the finder window started as a result. The hard disk does not have this problem when I use it on another Mac running Snow leopard. Also, two other external hard disks that I use on this computer running lion 7.4 still have the normal header bars with columns that can be reordered, etc.
I have tried looking in preferences and other places but have not seen this discussed.

Well duh - I finally figured out that somehow in the View options for the hard drive, the "arrange by" option had been changed to "by date" from "none". Not sure how that happened, I had never used the "view options" menu tem before. Changing "arrange by" back to "none" gets the gray column headers and the collapsible folder icons back.

Change Column Header from Crosstab

Hi, can I change the column's header from a crosstab in a JSP?, by example, I have a crosstab with one column where the header said "Product", and I want to change it to "Product A".
thanks.

Hi,
by making use of specific report column templates and column template conditions you can change the headers dynamically.
See this http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/ui_templt.htm#HTMDB25708 for more info.
regards,
Erik-jan

Change Column Heading in ALV Report

Hi,
I have developed a ALV Report, showing correct output.
Problem is that Column Heading is not showing correct...means it is showing as per field name. But We want to change as per our understand. i.e. One column heading is like Unrestricted Stock but we want Unrestricted Stock...(BILF is an indicator)..
We have write in the code..
FORM build_fieldcat10.
CLEAR fieldcat_ln.
ADD 1 TO col_pos.
fieldcat_ln-ref_tabname = 'MARD'.
fieldcat_ln-fieldname   = 'LABST'.
fieldcat_ln-seltext_m   = 'BILF Unrest.Stock'.
fieldcat_ln-key         = space.
fieldcat_ln-do_sum      = space.
fieldcat_ln-col_pos     = col_pos.
fieldcat_ln-no_out      = space.
fieldcat_ln-qfieldname = space.
fieldcat_ln-hotspot     = space.
APPEND fieldcat_ln TO fieldcat.
ENDFORM.                    " BUILD_FIELDCAT1
But after change the selection text...not showing correct text..How can i change Column heading???
Please help me..

Thanks a lot dear..
My problem resolved by using SCRTEXT_L.

Adding a Contact Form, is it possible to change the FROM address in the header to the submitter's email address?

As it stands now the FROM address used is the site default (mine); using REPLY in the resulting email from the form should have the submitters email address not mine. I was able to switch this in the code (form-u1768.php) of an earlier version of MUSE. The PHP has changed in the current version (2014) and I'm not seeing how to pull off the same manual tweak. Any Ideas? Thanks!

I found this: Re: In adobe muse, how do you control the replyto address for a form? The site I'm working on is uploaded via FTP to another host. So, "...the email 'reply-to' header is filled in with the email address entered by whoever filled out the form, so you can hit 'reply' in your email software to reply to the form submitter." However, what if I want to take my chances on the form mail coming out of my site? Is there a tweak in the PHP that I can perform to change the FROM address to the same as REPLY-TO? Is there any reason this wouldn't work:
function get_email_headers($to_email, $form_email) {
$headers = 'From: ' . $form_email . PHP_EOL;
$headers .= 'Reply-To: ' . $form_email . PHP_EOL;
$headers .= 'X-Mailer: Adobe Muse CC 2014.1.6 with PHP' . PHP_EOL;
$headers .= 'Content-type: text/html; charset=utf-8' . PHP_EOL;
return $headers;
...vs. the way it is coded by MUSE:
function get_email_headers($to_email, $form_email) {
$headers = 'From: ' . $to_email . PHP_EOL;
$headers .= 'Reply-To: ' . $form_email . PHP_EOL;
$headers .= 'X-Mailer: Adobe Muse CC 2014.1.6 with PHP' . PHP_EOL;
$headers .= 'Content-type: text/html; charset=utf-8' . PHP_EOL;
return $headers;

How to change read only folders into normal ones...i can't get any filed from my harddrive

how to change read only folders into normal ones...i can't get any filed from my hard drive..it shows read only

Which HDD are you referring to, an external one, or the internal SSD?
If external, which format is it in?

How to change column "Date" from "Text" to "Date-Time" in Document Library.

How to change column name "Date" from "Single line of Text" to "Date and Time" in Document Library.

Hi,
If you would change column type, you might need to re-create column.
If you would like a text column to display in date format, you could refer to the links below:
http://sharepoint.stackexchange.com/questions/45774/how-to-convert-date-field-in-single-line-of-text-using-calculated-columns
http://yasuanantha.blogspot.com/2008/06/to-convert-text-column-to-date-column.html
Regards,
Rebecca Tu
TechNet Community Support

Change "Date" From a Column in Table A, to New Column in Table B:

I'm trying to pull a Date from TABLE_A, and change the year to a current date, and popluate this into a new table. I also want to pull the PK of TABLE_A over, so that I can create a link back to the master record.
In my example I'm useing SYSDATE for my current date. Once I get the script working, I want to pull the Calander_Date from my "Current Calendar" in APEX.
1. INSERT INTO TABLE_B (NAME_ID,Date,New_Date VALUES (
2. NAME_ID , (This is a Column FROM TABLE_A),
3. DATE, (This is also a Colum From TABLE_A)
4. TO_CHAR(DATE,'DD')||'-'||
5. TO_CHAR(DATE,'MON')||'-'||
6. TO_CHAR(SYSDATE,'YY') )
7. FROM TABLE_A
8 WHERE TO_CHAR(DATE,'MON') = TO_CHAR(SYSDATE,'MON');
Needless to say, this doesn't work!!! I'm very new to SQL and APEX. I've also tried embedding SELECT STATEMENTS, as shown below, but still now dice (Trying to figure out out to calculate the TO_CHAR FROM DUAL and from TABLE_A for the "DATE" Column)
1. INSERT INTO TABLE_B (NAME_ID,Date,New_Date VALUES (
2. SELECT NAME_ID FROM TABLE_A,
3. ELECT DATE FROM TABLE_A,
4. SELECT TO_CHAR(DATE,'DD')||'-'||
5. SELECT TO_CHAR(DATE,'MON')||'-'||
6. SELECT TO_CHAR(SYSDATE,'YY') ) FROM
7. FROM NAMES
8 WHERE TO_CHAR(DATE,'MON') = TO_CHAR(SYSDATE,'MON');
Depending on the modifications I make I usually get the following two errors:
ORA-0933: SQL Command not properly ended (in the first example)
ORA-00936: Missing Expression (in the second example).
Appreciate any thoughts you all might have!!!
LEONHARK

So here's a question: are the different pieces of the day stored in the same column in Table A, or different columns? If they are the same, you can simplify a lot of your data copy procedure to:
insert into TABLE_B (NAME_ID, SOME_DATE, NEW_DATE)
values (select KEY_ID, to_date(ORIG_DATE,'DD-MM-YYYY') from TABLE_A
where to_date(ORIG_DATE,'MM') = TO_DATE(SYSDATE,'MM'));If the dates are stored in individual fields in Table_A, use something like:
insert into TABLE_B (NAME_ID, SOME_DATE, NEW_DATE)
values (select KEY_ID, to_date(ORIG_DAY || '-' || ORG_MONTH || '-' || ORIG_YEAR,'DD-MM-YYYY') from TABLE_A
where to_date(ORIG_DATE,'MM') = TO_DATE(SYSDATE,'MM'));An alternate for your where clause that uses a range of dates instead of a specific month is
where to_date(ORIG_DATE,'DD-MM-YYYY') between TO_DATE('01-01-2007','MM-DD-YYYY') and TO_DATE('12-31-2007','MM-DD-YYYY');A couple of advantages: a date comparison is much faster than a string comparison and more accurate to what you want. Convert the strings to dates rather than the dates to strings. In my opinion, dealing with dates can be one of the biggest headaches for those learning SQL. There are a lot of good helps out there, but you will want to familiarize yourself with the TO_DATE() and TO_CHAR() functions, because you will use them a lot!
Also, store dates as DATE datatypes! Do NOT store them as text! You will save yourself a lot of headaches and your queries will run much faster if you use DATE datatypes.

Change column header dynamically at report run time

how to use LOV In report column definition under column attributes for display..
If it suceeded will it dynamicaly change header name at time of running report
my requirement is actually to change column header dynamically at time of run report
is it possible with above mentioned way?
Apex 4.1, Oracle 11g, PL/SQL Gateway configuration
Please help me on this
Thanks

Hi,
by making use of specific report column templates and column template conditions you can change the headers dynamically.
See this http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/ui_templt.htm#HTMDB25708 for more info.
regards,
Erik-jan

CWB-Need to change the eligible salary column from yearly to monthly

Hi All,
I need to change the eligible salary column from yearly to monthly at Employee Allocation from Compensation Workbench.
Kindly help me guys
Regards,
Sajid

You can change the activity reference period in the Plan Form - > Not In Program tab from annually to monthly. However, it will impact all the calcuations as it will use monthly values for everything. Please be careful of this. I would suggest testing this (along with posting back the increases to ensure they are annual amounts) before proceeding with this.

Change columns from header to normal

Similar Messages

Maybe you are looking for