Change datagrid query from combobox
So I have a datagrid with a couple combo boxes down at the bottom. The combo boxes have static values. Based on the selection, I want the combo box to invoke the query in my CFC, passing the argument of what the selected value is. Then have the datagrid refresh with the new query.
Anyone passed by any tutorials for this type of thing?
I have seen some where you dump all the data to the grid and filter based on the combobox, but I would prefer to not have all of that overhead of pulling every record. I would like for the SQL to do the filtering based on the argument.
Thanks!
Are the comboboxes in the datagrid/itemrenderer or are they at the bottom of the container ?
Similar Messages
-
Dynamically change sql query (from statement)
Hi all,
Is it possible to change the 'from statement' dynamically in
report 6i? I have 3 identical tables with different names (each
to collect data in different area) and I want to be able to
dynamically change the sql query at run time so I can use only
one (1) report to print data in 3 different tables.
Is it possible? Thanks for the tip!Yes you can. Create a user parameter lets say "frm". give the
initial value for the parameter as the table a. Ex : FROM EMP .
Go to the datamodel of the report . Change the query like this,
Original query => Select * from emp
Modified query => Select * &frm
Coz frm has the default value FROM EMP, so it will replace the
default value. When you call the report from differrent product
you can pass the parameter value as table a, table b , table x.
Hope you got your answer.
Thanx
Feroz -
Change Reports query from Form
Hi,
Can I use PL/SQL in a Form to modify or add to the Report's query in runtime?
i.e
If a Text Item in a form was left blank in then I would like to modify the WHERE clause
in the Report to remove one of the parameter defined.
in Report's query
WHERE a.myfield >= :p_1 and a.myfield <= :p_2
become
WHERE a.myfield >= :p_1
if the Text Item in form (for p_2) was left blank.
Any help would be greatful.
Many Thanks,
BuntoroHi,
you can use lexical parameter to do this thing
It's better if you change your query to
select * from emp where &where_clause
here,
where_clause is a parameter with some default value. U must give some default value to it.
ans then pass this parameter from form..
hope it will help you...
... -
hi,
i am filtering my datagrid based on combobox selectedvalue
inside the datagrid am having 1 more combobox which is
causing an issue
here is my filterfunction
public function filterStudentsGrid():void {
studentsAC.filterFunction=typeFilter;
studentsAC.refresh();
public function typeFilter(item:Object):Boolean {
if (studentTypeCB.selectedItem != "All"){
return item.studentType == studentTypeCB.selectedItem;
//this line causing error
} else {
return true;
my combobox is like
<mx:ComboBox labelField="Student Type" id="studentTypeCB"
dataProvider="{studentTypeArray }" change="
filterStudentsGrid();"/>
now my problem is that as soon as i selected studenttype from
combobox am getting this error
ReferenceError: Error #1069: Property studentType not found
on String and there is no default value.
i don't understand why am getting this error after dismissing
this error am able to save the selected value from combobox in
database.Debug to determine exactly what is producing that error.
I suspect this is the culprit: item.studentType
In your function typeFilter, examine the item object to make
sure it is always a studen object. The error implies it is a
string.
Tracy -
Can developer change query from one package to other, or only basis guy....
can developer change query from one package to other, or only basis guy....will do that?
In the development system, a developer normally has authorizations to do that.
Mathew. -
Form Change it status from Query to others without any reason
Hello,
I have two forms(develper 10g R2) first one works fine if I call that form via menu and want to exit without any modification or insertion it will not ask for saving or cancelation but the second form ask every time for saving and cencellation when I call that form, without any modification/insertion the problematic form have three blocks first block is Control block(database block =NO) and when I called form the cursor moves directly in to the Control block and if I want to exit without touching anything it ask for saving/cancelling,
on exit I wrote code like this
IF :SYSTEM.FORM_STATUS <> 'QUERY' THEN
ELSE
exit_form(no_validate, full_rollback);
end if;
some one have idea why.
Thanks and Regards, Khawar.Hi SIS,
I ran form in debug mode and continuesly monitor form status, it start with Status of NEW(is it normal??), since the status is new it ask for saving/cancel, I have another form(which behave normal) I did same with it, it also start with NEW status but when I assign a value to an item resides in Control block in WHEN NEW BLOCK INSTANCE trigger the form status changes to QUERY, so I applied same here and assign dummy value to dummy item, and it works fine.
Thanks, Khawar -
Getting selected item from combobox itemrenderer and storing in object
Hi Guys,
Can anyone help me in this regard. Its very urgent.
I have a combo box itemrenderer in datagrid column. I want to get the user selected item from the dropdown of the row(s) (User may select values from combo box from multiple rows of datagrid) and corressponding values of all other columns of the rows and store it in an object . Then pass this object to database to update only those rows that user has changed.
I am able to get the selected item from combo box using "event.currentTarget.selectedItem" and corressponding values of all other columns of the rows using "valueSelect.ID", etc where valueSelect is object which contains data for datagrid. But am stuck up with, how to store the selected item value of the combobox and corressponding values of all other columns of the rows into an Object ?.
Can anybody help me with sample to store selected item from combobox and its corressponding values of all other columns into an object which i can send to db...?
Kindly help me in this regard.
Thanks,
Anand.Hi!
Are you using a collection of VO or DTO as the dataprovider of the combobox component?
If so, have you created some attribute there to control the user's selection in the combobox?
For instance:
private var selected:Boolean = false;
If your solution fits this approach, you may create a new collection that contains just the objects that were selected by the user, it means you can loop through the datagrid's dataprovider and only insert in this new collection those objects that have the attribute "selected" set to true.
For instance:
private function getSelectedRecords(datagridDataProvider:ArrayCollection):ArrayCollection
var newCollection:ArrayCollection = new ArrayCollection();
for each (var item:Object in datagridDataProvider)
if (item.selected)
newCollection.addItem(item)
return newCollection;
Afterwards, you may serialize this new collection with your back-end.
Hope it helps you!
Cheers,
@Pablo_Souza -
How I can change this query, so I can display the name and scores in one r
How I can change this query, so I can add the ID from the table SPRIDEN
as of now is giving me what I want:
1,543 A05 24 A01 24 BAC 24 BAE 24 A02 20 BAM 20in one line but I would like to add the id and name that are stored in the table SPRIDEN
SELECT sortest_pidm,
max(decode(rn,1,sortest_tesc_code)) tesc_code1,
max(decode(rn,1,score)) score1,
max(decode(rn,2,sortest_tesc_code)) tesc_code2,
max(decode(rn,2,score)) score2,
max(decode(rn,3,sortest_tesc_code)) tesc_code3,
max(decode(rn,3,score)) score3,
max(decode(rn,4,sortest_tesc_code)) tesc_code4,
max(decode(rn,4,score)) score4,
max(decode(rn,5,sortest_tesc_code)) tesc_code5,
max(decode(rn,5,score)) score5,
max(decode(rn,6,sortest_tesc_code)) tesc_code6,
max(decode(rn,6,score)) score6
FROM (select sortest_pidm,
sortest_tesc_code,
score,
row_number() over (partition by sortest_pidm order by score desc) rn
FROM (select sortest_pidm,
sortest_tesc_code,
max(sortest_test_score) score
from sortest,SPRIDEN
where
SPRIDEN_pidm =SORTEST_PIDM
AND sortest_tesc_code in ('A01','BAE','A02','BAM','A05','BAC')
and sortest_pidm is not null
GROUP BY sortest_pidm, sortest_tesc_code))
GROUP BY sortest_pidm;
Hi,
That depends on whether spriden_pidm is unique, and on what you want for results.
Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements, relevamnt columns only) for all tables, and the results you want from that data.
If you can illustrate your problem using commonly available tables (such as those in the scott or hr schemas) then you don't have to post any sample data; just post the results you want.
Either way, explain how you get those results from that data.
Always say which version of Oracle you're using.
It looks like you're doing something similiar to the following.
Using the emp and dept tables in the scott schema, produce one row of output per department showing the highest salary in each job, for a given set of jobs:
DEPTNO DNAME LOC JOB_1 SAL_1 JOB_2 SAL_2 JOB_3 SAL_3
20 RESEARCH DALLAS ANALYST 3000 MANAGER 2975 CLERK 1100
10 ACCOUNTING NEW YORK MANAGER 2450 CLERK 1300
30 SALES CHICAGO MANAGER 2850 CLERK 950On each row, the jobs are listed in order by the highest salary.
This seems to be analagous to what you're doing. The roles played by sortest_pidm, sortest_tesc_code and sortest_test_score in your sortest table are played by deptno, job and sal in the emp table. The roles played by spriden_pidm, id and name in your spriden table are played by deptno, dname and loc in the dept table.
It sounds like you already have something like the query below, that produces the correct output, except that it does not include the dname and loc columns from the dept table.
SELECT deptno
, MAX (DECODE (rn, 1, job)) AS job_1
, MAX (DECODE (rn, 1, max_sal)) AS sal_1
, MAX (DECODE (rn, 2, job)) AS job_2
, MAX (DECODE (rn, 2, max_sal)) AS sal_2
, MAX (DECODE (rn, 3, job)) AS job_3
, MAX (DECODE (rn, 3, max_sal)) AS sal_3
FROM (
SELECT deptno
, job
, max_sal
, ROW_NUMBER () OVER ( PARTITION BY deptno
ORDER BY max_sal DESC
) AS rn
FROM (
SELECT e.deptno
, e.job
, MAX (e.sal) AS max_sal
FROM scott.emp e
, scott.dept d
WHERE e.deptno = d.deptno
AND e.job IN ('ANALYST', 'CLERK', 'MANAGER')
GROUP BY e.deptno
, e.job
GROUP BY deptno
;Since dept.deptno is unique, there will only be one dname and one loc for each deptno, so we can change the query by replacing "deptno" with "deptno, dname, loc" throughout the query (except in the join condition, of course):
SELECT deptno, dname, loc -- Changed
, MAX (DECODE (rn, 1, job)) AS job_1
, MAX (DECODE (rn, 1, max_sal)) AS sal_1
, MAX (DECODE (rn, 2, job)) AS job_2
, MAX (DECODE (rn, 2, max_sal)) AS sal_2
, MAX (DECODE (rn, 3, job)) AS job_3
, MAX (DECODE (rn, 3, max_sal)) AS sal_3
FROM (
SELECT deptno, dname, loc -- Changed
, job
, max_sal
, ROW_NUMBER () OVER ( PARTITION BY deptno -- , dname, loc -- Changed
ORDER BY max_sal DESC
) AS rn
FROM (
SELECT e.deptno, d.dname, d.loc -- Changed
, e.job
, MAX (e.sal) AS max_sal
FROM scott.emp e
, scott.dept d
WHERE e.deptno = d.deptno
AND e.job IN ('ANALYST', 'CLERK', 'MANAGER')
GROUP BY e.deptno, d.dname, d.loc -- Changed
, e.job
GROUP BY deptno, dname, loc -- Changed
;Actually, you can keep using just deptno in the analytic PARTITION BY clause. It might be a little more efficient to just use deptno, like I did above, but it won't change the results if you use all 3, if there is only 1 danme and 1 loc per deptno.
By the way, you don't need so many sub-queries. You're using the inner sub-query to compute the MAX, and the outer sub-query to compute rn. Analytic functions are computed after aggregate fucntions, so you can do both in the same sub-query like this:
SELECT deptno, dname, loc
, MAX (DECODE (rn, 1, job)) AS job_1
, MAX (DECODE (rn, 1, max_sal)) AS sal_1
, MAX (DECODE (rn, 2, job)) AS job_2
, MAX (DECODE (rn, 2, max_sal)) AS sal_2
, MAX (DECODE (rn, 3, job)) AS job_3
, MAX (DECODE (rn, 3, max_sal)) AS sal_3
FROM (
SELECT e.deptno, d.dname, d.loc
, e.job
, MAX (e.sal) AS max_sal
, ROW_NUMBER () OVER ( PARTITION BY e.deptno
ORDER BY MAX (sal) DESC
) AS rn
FROM scott.emp e
, scott.dept d
WHERE e.deptno = d.deptno
AND e.job IN ('ANALYST', 'CLERK', 'MANAGER')
GROUP BY e.deptno, d.dname, d.loc
, e.job
GROUP BY deptno, dname, loc
;This will work in Oracle 8.1 and up. In Oracle 11, however, it's better to use the SELECT ... PIVOT feature. -
Changing the query on a view object
I have a view object right now, based on an entity. It is the default view object, so that means the query in the view object is straight forward, it grabs all of the attributes from the table. And there is no WHERE clause.
In reality I only want to show a finite set of rows from my table. Every time a record is changed/edited in this entity and committed, a new row in the database is created with the same information (I'm using CreateWithParams) except for a few columns.
I actually don't really have update on this table, just creation of new rows. But to the user, I want it to 'look' like they are editing something in the table.
Example:
12, 11:32,Thompson, 60 (the user edits this information in an adf table, and a new row is created in the db)
12, 11:55, Thompson, 75
I have a timestamp (see above) field in the database that is used as part of my primary key, so that I know which record is the latest.
When the VO query is run, I want the user to only see the latest row from the db.
12, 11:55, Thompson, 75
So...
I went to my VO, and I changed the WHERE query to add this:
where t1.TimeStamp = (Select MAX(t2.TimeStamp) FROM rcl.x t2 where t1.uid = t2.uid);
Now, this isn't a mysql/sql question. There's actually a better query that I'd rather run, but the VO editor doesn't allow me to change the query itself....
When I save the new WHERE to my VO, run my page again, I get the expected result (showing me only the latest records).
However, when I try and sort on the table in which my data is displayed, I am now getting ORDER BY errors.
I don't want my VO to be read-only sql based. I want to be able to update my table, so I have my VO running off of the entity.
Why doesn't the VO allow me to change the query itself? (Like do a subquery, instead of having my where clause do the work)
Why are order by errors being thrown when I sort on my adf table after changing the where clause in my view?
Hopefully I wasn't too convoluted in the explanation of my problem..
Thanks in advance,
JoelHI Joe,
Regarding your problem you can do one of the following tasks:
1- easily to tuning on your view object, I mean in the tuning page of the view you can set that only return 1 record or 2-3 record fetch not all the record.
in the order by you will order by the timestamp field and descending.
2- you can order by the timestamp descending and in the where clause only set the rownum<2 (will return the last record) you can also set rownum<5 and get the 4 last record etc.
3-editing the view query in the expert mode is not advised at all because of many consequences that you will face.
4- maybe it is not bat that you add a readonly view for the table you mentioned and every time you unpdate the entity just re-execute the read-only view.( this method maybe is good maybe is not it depends on your business logic)
Regards.
Edited by: Amir Khanof on Sep 3, 2010 11:11 PM -
RC 8 error while transporting the query from Dev to Qa - Element missing
Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
Start of subsequent processing ... 20110517070025
End of subsequent processing... 20110517070045
Kind regards,Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you. -
ORA-27092 Error while executing any query from client
Hello
I am getting following error while executing any query from client remotly.
IAMDBA@TEST_OAT.ABCD > select userid from dual;
select userid from dual
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 1
ORA-01110: data file 1: '/u01/prod/system/system01.dbf'
ORA-27092: size of file exceeds file size limit of the process
Additional information: 131071
Additional information: 286209
But while local connection,its working.hi,
ulimit command- Limit user resources
su - oracle
ulimit -n (this command will show you the current value for ulimit the default value is 1024)
to increase its value:---
ulimit -n <some value> ( this command will change value for current session only)
example
ulimit -n 101062
once done check the value as:--
ulimit -n( for verification)
search in google for more explanation or revert back to me for any suggestions.... :)
Edited by: varun4dba on Jan 31, 2011 4:09 PM -
Impact of selecting "Removing Query from Selection List" in 2 channels.
HI All ,
I have customized a query in one channel (My Agreements and Contract Documents query in Master Agreements List channel) and have removed the standard query from the channel by checking the "Remove Query from Selection List" and introduced my custom query in that query group .
But it resulted in break in chain for "Master Agreements" link in "Contracts To Do List" channel as the link was pointing to standard "My Agreements and Contract Documents" query and is displaying "The query can not be executed. Contact your system administrator" when ever I click on that.
Any pointers on how to overcome above scenario wud be gr8!
Regards,
UdayHi Uday,
In order for To Do List channel to work, the query definition should be in the Master Agreement List query group. Do you still want the standard query in the To Do List? If so, you would have to leave it on the Query Group as To Do list is pointing to it. May be change the display name of the query so you can differentiate between the 2 queries. The other option is change the To Do channel to point to the custom query.
Regards,
Vikram -
Problem while changing the query of the field in Oracle apps 11.5.10
Hello All,
Requirement:
User want to change the query of the LOV attached to Ordered item field on Line items tab on the Sales order form in Order managment
Block name = 'LINE'
Field name = 'ORDERED_ITEM_DSP'
LOV attached to this field in FMB: ITEMS
LOV attached to this field in front end: ENABLE_LIST_LAMP
Problem: Following code is firing at all points (Debug messages are appearing at all points) but Query of the LOV attached to item is still same.
How can in FMB LOV is "ITEMS" and in front end "ENABLE_LIST_LAMP"
My guess is there is some problem with the LOV name which we are passing in the code below. Because LOV name attached to item are different in front end and FMB. There is no LOV in FMB which has “SYSTEM ITEMS Description” kind of structure.
I have written following code in custom.pll (l_chr_rg_query is query taken from the record group attached to “ITEMS” named LOV with some modifications ex: rownum<6 so that it will show only 6 records in LOV if it is really firing our query for LOV)
IF ( form_name = ‘OEXOEORD’
AND block_name = ‘LINE’
AND field_name = ‘ORDERED_ITEM_DSP’
AND event_name = ‘WHEN-NEW-ITEM-INSTANCE’
THEN
MESSAGE (‘message1’);
l_chr_rg_name := ‘XXLION_UNIFORM_CODE_RG’;
l_chr_rg_query :=
‘SELECT item, item_id, item_description, inventory_item_id,item_identifier_type,null item_identifier_type_meaning, ‘
|| ‘inventory_item, address, cust_address, item_definition_level ‘
|| ‘FROM oe_return_items_v ‘
|| ‘WHERE (sold_to_org_id = :parameter.lov_num_param1 OR sold_to_org_id IS NULL)’
|| ‘ and rownum < 6 ORDER BY item’;
MESSAGE (‘message2’);
l_rg_id := FIND_GROUP (l_chr_rg_name);
MESSAGE (‘message3’);
IF ID_NULL (l_rg_id)
THEN
MESSAGE (‘Creating record group here’);
l_rg_id :=
CREATE_GROUP_FROM_QUERY (l_chr_rg_name, l_chr_rg_query);
END IF;
errcode := POPULATE_GROUP (l_rg_id);
MESSAGE (‘ERROCODE is : ‘ || errcode);
L_lov_id := FIND_LOV (‘ITEMS’); --My guess is this LOV name is the source of problem.
MESSAGE ('Error code is4');
SET_LOV_PROPERTY (l_lov_id, group_name, l_rg_id);
MESSAGE ('Error code is5');
SET_ITEM_PROPERTY ('LINE.ORDERED_ITEM_DSP', lov_name, 'ITEMS');
END IF;I found that there is no problem with code. My problem is not technical, its a functional problem.
It is related to Inventory's "System Items" KFF.
Can anybody tell me, to this "System Items" KFF, one value set is assigned. but it is of none type of value set. so from where the values in LOV are coming? -
How to change report query dynamically in Oracle APEX?
Hi,
I want to dynamically change the where condition in APEX report query. Can anyone help me solve my this problem?
(Just want to change the query which we change in Oracle Reports using lexical parameter to change &Where, &Order by etc. dynamically!!)
Thanks, PrafulHi
I've been using flexible queries in APEX for a few years now, and your question just added a whole new dimension to the flexible and powerful nature or writing reports in APEX.
While APEX Interactive reporting has almost completely removed the need the equivalent of Lexicals in Oracle Reports, I thought it might be fun to try and use lexicals in an APEX report.
Before we start I should summarise the powerful capability of APEX reporting to have oprtional parameters (lots and lots of them if this is needed).
For each parameter, you simply add a page item which will hold the value of the parameter.
The item/parameter can be populated by typing in the value, defining an LOV, using a date-picker etc.
To make the parameter optional simply use an OR in the where clause.
So for a apge item P200_PARAM1.....include
WHERE (:P200_PARAM1 IS NULL
OR COLUMN1 = :P200_PARAM1)
This way you can either leave the page item null or type in / select a value from a LOV.
There is a small quirk in APEX LOV's which sometimes returns a value of '%' or '%null%' - depending on the version - when no value is selected.
See Patrick Wolf's solution for this at Re: Null value handling in LOVs
I include this Application Process in all my APEX applications ;)
Now let's look at using the equivalent of Oracle Reports Lexicals......
First-off - this is based on the APEX SQL report - NOT Interactive Report.
It relies on the fact that you can let the query be parsed only at runtime.
1. Define an SQL report entering the 'core' of your query.
With a query like SELECT ENAME, JOB FROM EMP
Select 'Generic Columns' option in the 'Column Headings' section
Finish the report creation
2. Define a page item - say P200_LEXICAL - type text on the page
3. Edit the report and update the SQL query to include your lexical page item
SELECT ENAME, JOB FROM EMP &P200_LEXICAL. (REMEMBER THE '.' AT THE END)
Ensure that the option "Use Generic Column Names (parse query at runtime only)" is selected at the bottom of the query
4. Add a button to the page -using 'Create a button displayed among this region's items' the will submit the page.
5. Run the page - you will see all the employee names and job desdriptions
6. Enter a where clause into the 'Lexical' textbox - say "WHERE ENAME LIKE 'K%'" and click the 'Go' button
Voila! your where clause is magically applied.
Try any variant you like adding an ORDER BY clause etc...... this is FUN!
7. Clear the value of the LEXICAL and click go.
Edit the report and move the &P200_LEXICAL. into the selected columns (or add another one)
SELECT ENAME, JOB &P200_LEXICAL. FROM EMP
8. Run the page
Enter ",SAL" in the textbox and "Go"
We can add as many columns as we like (subject to the "Maximum number of generic report columns:" set below the SQL query in the report edit section)
Now because we have all the flexibility in APEX of setting page items using SQL or PLSQL you can set the value of the lexical programatically, or just pre-set a few values in an LOV - the options are limitless.
While I've never had the need to use lexicals - you can see that APEX provides the most Flexible Lexicals in town.
Eat your heart out "Oracle Reports"!!!
Have fun
Mike -
Changing a Query do not show Results in the PLD Format
Hello Experts!!
I have a PLD report, and I changed the query a BIt
let say the oiginal query is select 'HELLO' from OINV where DocEntry between 100 and 110
but then I Changed to +select 'HELLO' + World' from OINV where DocEntry between 100 and 110+
But The PLD do not reload Data, there is any way to change this?Gordon Thanks for your answer,
but maybe i didnt explain myself clear.
let me explain a bit:
When you create a Query in the Query Manager, you can create a Print Layout.
then you can modify in
Tools>Queries>Query Print Layout
but that Layout is related to the Query you just did.
but when you change the query the Layout wont change ...
I think SAP do not work well with this, I think that Query Manager shoud have and Update button and then go and upate the query in PLD ... well thats all
Maybe you are looking for
-
I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help
Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!
-
After Update Mac OS 10.6.5 my macbook freeze
Immediately after updated to release 10.6.5 I encountered the following problem that occurs at least 3-4 votle day and apparently when I put my Macbook Pro under stress (quickly move windows, view many youtube videos, and any kind of excessive load o
-
For example, if I've created an application(spreadsheet) in java.. I want to execute it only by just double clicking an icon.. I don't want to go to command prompt and execute it.. So, how to create an icon for that application and it should execute
-
Unable to install BB Desktop SW
I was trying to install the bb desktop sw from the weblink in my laptop and desktop. Unfortunately following error is displayed. I have win 7 in both the OS. Please help. Thank in advance.
-
Why will my max not start up? White screen
I have a MacBook Pro it turns on and after the apple logo goes away the screen stays white and you can move the mouse cursor around the screen but that's it