Change dbid without touching readonly-tablespaces

When I start dbnewid it tells me I need to change some datafiles to readwrite to be able to change the dbid for those readonly-files. I want to change the dbid without changing those files to readwrite.
Is it possible to change the dbid for a database (10g) without touching the readonly-tablespaces?

newdbid is changing control file and data file headers information.
If tablespace is read only, it's not able to change info.
But there is workaround
Read this one:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dbnewid.htm#i1004775
At the very end are mentioned restrictions:
All read-only tablespaces must be accessible and made writable at the operating system level prior to invoking DBNEWID. If these tablespaces cannot be made writable (for example, they are on a CD-ROM), then you must unplug the tablespaces using the transportable tablespace feature and then plug them back in the database before invoking the DBNEWID utility (see the Oracle Database Administrator's Guide).

Similar Messages

My Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

my Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

Try the basics from the manual.
restart.
reset.
restore.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

My Iphone 4 with iOS 5 changes without touching the glass the windows!

Since a few days my Iphone changes the windows forward and backward without touching the glass. It's very annoying because writing a new sms is very diffucult because the content is deleted an i have start again several times.
What can I do? I still reseted my Phone and put on it the Backup. But there are no changes.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

Chromebook wifi security/ SSID changes without touching all of them?

Hello, Looking for some advice I have searched and only found a very limited bit of information on my issue.I have recently taken over and IT department and I have 900+ Dell Chromebooks. One of my fist goals is to get rid of my open wifi connection on my network for obvious reasons. I guess the previous IT Director thought it was easier to have the AP with no encryption. I don't want to have to touch all of the chrome books. I have created another ssid and I added it in the google admin console with the password and pushed the policy update out to the test chrome book that I am using. I have also ran a policy update on the chromebook manually. The chrome book can see the new SSID however its still wants the password. I know there has to be a way to change an SSID or password without touching all of the devices. Any and all help would...
This topic first appeared in the Spiceworks Community

The private Italian spyware firm Hacking Team has become the victim of a hack itself, with more than 400GB of data compromised and released via a torrent. The hacker “PhineasFisher” who claims responsibility for the data heist is also responsible forsurveillance tech company Gamma International based in the UK. One of the most damaging aspects […]…Read MoreThe post Hacking Team Breach Reveals Nation State & Corporate Customers appeared first on The State of Security.
Read More

My i-touch music is interrupted by voice memo. the music also fast forwards, changes tracks or stops and starts without touching the i-touch

my i-touch music is interrupted by voice memo. the music also fast forwards, changes tracks or stops and starts without touching the i-touch. can you help?

Try the standard fixes:
- Rest. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defauslts/new iPod.

Customize interface without touching the source code

My VP of of marketing is at it again. I have pasted in the exact email that he sent me. If anyone has ideas or suggestions or knows if Forms 9i has this built-in capability, please let me know.
Thanks.
Can you post this on metalink and see if someone at Oracle (or elsewhere) has an answer for us? Somehow, other LIMS developers are distributing LIMS products that allow their users to customize the interface without touching the source code -- no impact on their ability to take new releases. How do they do that?
Here's my question:
Anyone familiar with the Tools / Forms / Design this Form feature in MS Outlook? This allows a mere mortal to actually create and publish a custom Outlook form (could be a Contact, Task, Note, Journal, etc. form) across the organization. Is there such a capability built into Oracle9i Forms? In other words, can a developer easily build and distribute an Oracle software app such that the end-user can use an administrative tool to modify the interface/forms, add fields, change field names, move things around on the form, change colors, etc. -- without needing the Oracle Developer tool used by the original software developer, along with source code?
Here's my original email from a few months ago:
Our VP of marketing has been on my case about the ability to allow customers to "map" a form label (prompt) to a "custom" label of their choosing. The only way I know to do this is to create a "mapping" table and each time a form opens have code in the Post-Query trigger that changes the prompt of each column to the label that is in the "mapper" table. My fear here is Performance. Also, if the user closes that form and comes back to it - that logic has to be executed again - once again Performance. We have thought about the global variable idea, but we have over 100 tables with approx. 20 columns each. That's alot of globals to carry around. What's the overhead of carring around let's say 150 global variables?
My questions to all of you are:
1) Is anyone else doing this exact thing?
2) If so, what is the performance hit?
3) Is there a way to "remember" after the first time it paints - until the application is closed (not just that form) - other than global variables?
4) Is there a solution already in place within Forms for this?
5) Is there newer technology that has overcome this problem?
My VP doesn't like the mapping idea. He wants to know isn't there a better way instead of mapping all the fields. Isn't there some simple utility provided by Oracle that allows the user to simply change the form labels (no, he's not talking about Oracle Developer). He is a real Outlook nut. So he's always comparing everything to how Outlook works. This is how it works in Outlook -- you click on Design Form, modify it, then install it on the machine. Surely Oracle must have something like this. He thinks we're asking the wrong question or not asking it in the right way. I'm not sure how else to ask it. Our users want to see "Date of Birth" spelled out instead of "DOB" as the label for a column on a form. Is there a way for them to take the fmx and change that label? Is there a better way other than storing this in a table and querying it up each time the form opens? Yes, I could use a global so I don't have to query it from the database every time, but I still have to evaluate every time the form is opened during that session to see which label I need to use and then set the prompt accordingly. Our VP doesn't like this, he wants this to be a one time change.
Thanks so much for you help,
Tina

Hmmm.... either your VP of marketing or the users have too much time on their hands. ;-)
I would go with a lookup table. If your database is responsive and you index the table by form name, you can retrieve a number of rows and setup the screen quickly enough that nobody would notice any time lag.
If there aren't too many titles stored in the form, you could use a PLL library procedure and stuff all of them into a few globals -- just stack them into a single string separated by an odd character, like maybe chr(3). Then when the form is called again, it could first check to see if the globals exist, and parse the titles from there.
But be careful about changing field titles. If they change DOB to Date of Birth, the length changes, and so you need to determine where the extra length goes. The title field must be wide enough and the text justification should be set properly.

PDB without local TEMP Tablespace

Due to the Oracle Database 12c Concepts Guide it should be possible to create a PDB without a local TEMP Tablespace and the create PDB syntax includes the option (MAX_SHARD_TEMP_SIZE).
But I cannot find any hint how to create a PDB without a TEMP Tablespace or how to change the default temp tablespace to point to the CDB:
Any help will be appreciated.

There is no standard way to create a PDB without a TEMP tablespace
Yes - there is. But you CLEARLY don't want to do things the standard way. You want to use some particular non-standard way.
It is not 'standard' to create a database without a temporary tablespace. That is almost ALWAYS a mistake. That generally happens when you use the CREATE DATABASE command and don't specify it properly.
When you create a database you do NOT have to create a temporary tablespace. That has been the RULE from the very beginning and it is still true for 12c. For proof see the DBA Guide:
http://docs.oracle.com/cd/E16655_01/server.121/e17636/create.htm#i1009290
Creating a Default Temporary Tablespace
The DEFAULT TEMPORARY TABLESPACE clause of the CREATE DATABASE statement creates a default temporary tablespace for the database. Oracle Database assigns this tablespace as the temporary tablespace for users who are not explicitly assigned a temporary tablespace.
You can explicitly assign a temporary tablespace or tablespace group to a user in the CREATE USER statement. However, if you do not do so, and if no default temporary tablespace has been specified for the database, then by default these users are assigned the SYSTEM tablespace as their temporary tablespace. It is not good practice to store temporary data in the SYSTEM tablespace, and it is cumbersome to assign every user a temporary tablespace individually. Therefore, Oracle recommends that you use the DEFAULT TEMPORARY TABLESPACE clause of CREATE DATABASE.
You don't have to believe me or the docs.
Try it yourself. That is the best way to learn. Post your results here for all to see.
That is what that 12c doc says and what ALL of the docs for the versions before say. See for yourself. Here is the doc link for Oracle 7.3 so you can see the CREATE DATABASE systax yourself
http://docs.oracle.com/cd/A57673_01/DOC/server/doc/SQL73/ch4a.htm#createdatabase
Without a temp tablespace Oracle is forced to use the SYSTEM tablespace for the temporary.
These are the STANDARD ways:
1. Create PDB with a temporary tablespace.
2. Use the DBCA with a custom template
3. Create your own PDB seed database without a temp tablespace and then clone your seed to create other PDBs without a temp tablespace
4. Use CREATE DATABASE to create a DB without a temp tablespace and then plug it in to your CDB root container.
Those are ALL standard methods. The last three result in PDBs withoug a temp tablespace.
#1 is what you should be using.
1. Create PDB with a temporary tablespace.
2. Shrink/resize the temp tablespace down to a minimum if you want
3. Assign the users to the CDB temp tablespace if you don't want them using the PDB temp
I would appreciate if you only answer to questions if you have tested it or have a precise answer to it!
I have done BOTH of those things. Your failure to recognize that is NOT my problem.
I have created a PDB without a temp tablespace using DBCA and a custom template.
I have also created a PDB without a temp tablespace by using the historical standard method of CREATE DATABASE without a temp tablespace and then plugging it into the CDB and a PDB.
It is YOUR responsibility to RTFM and YOUR responsibility to actually put your fingers on the keyboard and try things.
The forum is NOT a coding service so you have no right to expect someone to write code for you and no right to get upset if they don't.
dbca doesn't use any other commands than the one's I've already tried!
Your reality is different than Oracle's. Support your reality with some facts.
I just created a PDB (create pluggable database) and no wonder that one comes with a temp tablespace.
I don't see where you posted ANYTHING that shows:
1. exactly WHAT you did
2. exactly HOW you did it
3. exactly what results you got.
If you want help with the code or a process you are using you have to POST that code or process.
We can NOT see your computer screen to see what screens you see or what entries you make.
Complain about the messenger all you want.
But you will NOT be successful with 12c if you refuse to RTFM and refuse to try things yourself. Making unsubstantiated statements or trying to attack me may make you feel better but you won't learn anything from it.

Toshiba 32AV615DB While watching sound reduce without touching controller

Hello.
My TV behaves as if there is an extra remote signal.
While watching, the sound will reduce without touching the controller.
It's not possible to turn it up again. It will cycle through various set up displays.
Buttons on the side of the TV don't work.
You can turn the TV off and on, sometimes that will work, for a while!
Another day it will work perfectly.
Any suggestions welcome.
Thank you

Do you have any compact fluorescent lights where they can shine on the infra-red sensor on the TV?
Several years ago, we had a timer switch on a light with a compact fluoro globe, in front of a stereo set, and when the timer switched the light on, the stereo volume turned up as far as possible, the tuner changed channels and all in all, the results were less than satisfactory.
The problem was solved by simply shading the sensor from the CFL, and possibly, if you have a similar light source shining on your TV, this could be your problem.
Simply shading the light from your TV MAY cure it, if this is the case.
Let us know how it all turns out, ................. Please!!
donhe7
Message was edited by: donhe7

Why does the curser move across desktop without touching the track pad?

The curser has started to move across the screen without touching the track pad. There's no mouse connected. All networking connections are turned off. As the curser moves across the desktop, it opens new folders??? It will open as many as a dozen new folders before it stops at the left side of the screen and wouldn't you know it, the warranty expired last month! Any help to figure out a fix would be appreciated.

Do a #8 Reinstall Just OS X, then change your passwords.
Step by Step to fix your Mac
Secure your Wifi
WiFi security issues, at home and WiFi hotspots

Excel - Modify rows without touching other data (have gone thru LV report generation 4 designs)

File attached....
Have gone thru FAQs and examples. (And also 4 parts of 'Creating a Report in Microsoft Excel Using the LabVIEW Report Generation Toolkit'. Unfortunately this document is not clear enough for me.)
Have task of modifying rows of the same excel sheet, number of times without touching data already present (numbers and strings)
I have an excel file. (attached)
A test will be run N number of times. (N<=17)
SubTask 1 --> Each time it runs, string data needs to be placed in 'n'th row. (...there are going to be notes in Row 18 and row 19)
SubTask 2 --> Each time it runs, a 1D array data also will be placed in the same row (but in different cells)
SubTask 3 --> The number 'n' of the row (where to place the current iteration's data) needs to be determined on fly (by looking at "n-1"st non blank row)
The same file needs to be used.
How can above be achieved ?
thnks
Sandeep
Attachments:
sample excel file.xls ‏14 KB

See if this board will help.
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=2391

How do i change my ipod touch permanently from one apple id account to a new one

How do i permanently change my ipod touch from one apple id to a new one with my new ipad and have the same apps etc on both.
Thanks.

- Go to Settings>iTunes and App Stores and sign out and sign in with other ID. To update apps purchased with the first account you will have to log into that account.
- iTunes purchases are permanently locked to the account that purchased the.
- There are also other items on the device that are associated with the account such as iCloud account and where you can be reached for Messages and FaceTime.

How much is to change the ipod touch 5 screen at a London authorized apple store or technical support?, how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?

how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?, how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?

Big thank you, KP.
I will try it out Though I did try something similar before I posted to you ... and was unsuccessful

I bought a MacBook Pro off of someone and the home folder is still in their name...is there any way I can change it without losing all of my stuff?

So I recently bought a MacBook Pro off of someone so I can use it for school. The home folder is still in the previous owners name and I was wondering if there is any way I could change it without losing all of my stuff that is on the MacBook Pro?? Thanks for your help!

See Changing user account short name

When I was ready to place the order for my iPhoto book, I realized that it was for a soft cover book and I wanted hard cover. How can I change this without losing my prepared book?

When I was ready to place the order for my iPhoto book, I realized that it was for a soft cover book and I wanted hard cover. How can I change this without losing my prepared book?

Duplicate your book and try to change the theme in the copy. Chnaging the theme may change the layout of your text fileds. That is why you need the copy to be able to compare the pages before and after.
Ctrl-click the book in the Source list and select "Duplicate".
Click the "Change Theme" button in the upper right corner of the Book pane, make sure, you have the same theme selected and the same size. Click Hardcover.

Without touching the JSP file

Hi,
I just want to set a text in my browser with bold face from my
begin....Display method. say Back>.
Since i decalare this as a text and using .setvalue() i'm getting it
as it is(i.e back in browser o/p.
Can u suggest me the solution ?
Todd, thanks for ur previous suggestion.
Thanks and Regards,
Vidyasankar.

I'm not sure, but I assume what you're indicating is that you're getting
back literally "Back" in the rendered browser text (meaning the HTML
source is "<B&rt;Back</B&rt;"). If so, it's because you need to set
the "escape" attribute to false for the text field:
<jato:text name="FooText" escape="false"/>
Todd
----- Original Message -----
From: "VidyaSankar" <dnvidyasankar@y...>
Sent: Friday, February 09, 2001 2:49
Subject: [iPlanet-JATO] Without touching the JSP file
Hi,
I just want to set a text in my browser with bold face from my
begin....Display method. say Back>.
Since i decalare this as a text and using .setvalue() i'm getting it
as it is(i.e back in browser o/p.
Can u suggest me the solution ?
Todd, thanks for ur previous suggestion.
Thanks and Regards,
Vidyasankar.
[email protected]

Change dbid without touching readonly-tablespaces

Similar Messages

Maybe you are looking for