Change default value for no of records in T code KSB1
Hi,
I am trying change the default value (no of records) in T code KSB1.
Is it defaulted progarmatically or through some configuration?
Any help is appreciated.
Thanks
Govind
Thank you all for immediate reply.
I know that I can create a variant or change the value by hitting more settings.
I have also seen in the program and its hard coded there as 5000.
We need that value to be defulted as 10000.So my question is that can we change via configuration or it can be done only progamatically?
Thanks
Govind
Similar Messages
-
Default Value for Order Type based on Company Code in ME21N
Hi,
Using ME21N, I want to make the PO type defaulted to a certain company code, say for instance Company code XYZ should have a PO type XYZ Purchase Order, ..company ABC should have a PO type ABC Purchase Order, and so on...I'm just puzzled how to implement it. I know that we can set a Default value for PO Headers in Personal Settings but its doesnt give the result I want coz it will only have one Default Value. What I wanted is when a certain company code is chosen, automatically, the corresponding PO type for that Company code will be displayed in the Order Type drop-down menu (so there's no need to choose on the drop down list what Order type) Is this possible in ABAP? Hope i made myself clear.
Thanks in Advance.Use BADI IF IF_EX_ME_PROCESS_PO_CUST - method OPEN
View the interface documentation in transaction SE19 and you will see the method OPEN can be used :
2. Opening of a purchase order (OPEN method)
The system opens a new document to create, change or display a purchase order. With the OPEN method,
<b>you can import your own data and prepare it for further processing.</b>
This is available in 4.7 Enterprise but not sure how far back.....
hope this helps
Colin. -
GRC AC 10 - Change default value for field in access request
Hi everybody
in Access request, Is it possible to change the defaut value in the fied "request for" ?
thanks
AurélienHi Aurélien,
Yes we can make it default, please go to EUP and there is a field Request for. please check the snapshot.
Thanks and Regards
Ankit sharma -
How to change default value in contract by T-code ME32K?
Dear my freinds,
If you have one exist contract and then you use ME32K to change it, you will get default value for material group, plant and storage location in contract.
If you have one materail 1002 at plant AUXX and storage location 0001 in contract already, then you can see these value will be in contract below:
10 M 1 EA 0.00 1 EA 2B0880700 AUXX 0001
20 M 2B0880700 AUXX 0001
30 M 2B0880700 AUXX 0001
Our user does not want to display default value for filed material group, plant and storage location in contract by T-code ME32K.
Could you give me kind idea how to avoid it? which is really appreciated!
Thanks in advance!Hi Nick,
Thanks for your idea, I agree with you that it may be fixed by user exit and is not worth to do it, but i only want to know how to do it easily, hopefully I can get answer from you...
Thanks! -
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
How to use one variable as a default value for another variable?
Hi Experts,
Is it possible to use one variable as a default value for another variable?
For example:
Variable 1 = current calendar year month
Variable 2 = mandatory input ready variable for calendar year month
I want to use variable 1 as default value for variable 2, but also have the ability to change the month if required.
Thanks!
Kathrynu can use replacement path variable
in that case u can replace the values of 1 variable with the another variable...
but u cannot do this setting
u cannot make variable 2 as mandatory
u cannot enter value for variable 2
because by default it will take the value of variable 1
u have to make follow settings
variable 2
name , technical name
processing by = replacement path
infoobject = ocalmonth
next tab
replaced by another variable
variable name
offset start , offset lenght
save and hit okey -
How to set a default value for a page item
I am working with a facility table that has name and address information. The user can add contact name information on a separate page. Since the address for the facility and contact is usually the same, I want to add a default value for the contact address. The facility page is on 201 and the link to add a new contact row is on page 202. I showed in the default value :P201_street for the contact's address. But, when I run the page, the contact address field shows the :P201_street, not the actual facility address. What am I leaving out? Must be something obvious?!
Thanks very much.
JudyIn the default value, I showed: v('P201_STREET1') with the default value type of: PL/SQL Expression and received the following oracle error ==> Item default is not a PL/SQL expression. Use &ITEM syntax. The v('ITEM') syntax is not valid for item defaults. So I changed it to: &P201_STREET1 and got another oracle error , ERR-9132 error in PLSQL expression for item default code, item=P202_STREET1.
Any more suggestions? Thx.
Judy -
How to change default value in a table using ALTER TABLE
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
Any help will be needful for me
Thanks and Regardsuser598986 wrote:
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
ALTER TABLE test
MODIFY (indicator DEFAULT 'I');
Incidentally, INDICATOR is a keyword in Oracle, so you may have problems using it as a column name. If so, you'll have to enclose the column name in double-quotes, and be careful to use capital letters inside the quotes.
Edited by: Frank Kulash on Aug 26, 2009 11:42 AM -
How to set a default value for particular field in SRM PO Portal
Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
SathishDear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish -
How to change default value of requested delivery date in va21 create quo
hi experts,
My requirement is simple, to add one day to the default value of the Req deliv date under "General header data" in VA21.
I modified MV45AFZZ (an include in SAPMV45A).
I added this code:
if sy-tcode eq 'VA21'.
case screen-name.
when 'RV45A-KETDAT'.
write reqdate to RV45A-KETDAT.
screen-input = 0. "don't let user change it back.
screen-active = 1. " but let user see the field and the
endcase.
endif.
reqdate is the new value for RV45A-KETDAT which is sy-datum + 1.
This code does'nt actaully change anything. I tried to change other values of other fields using the same code and it works. Is RV45A-KETDAT the correct field to use?
Thank you in advance.You don't need to do that via user exit. You can configure the RDD defautls by document type in SD config, and adding 1 day to the current date is very simple. You can continue to use the FIELD_MODIFICATION user exit to lock down the field.
Also, as a general practice in the sales exits, don't use SY-TCODE, use T180-TCODE or T180-TRTYP, even if you're not using BAPIs to create documents. -
Default value for Read-Only Picklist Field
Hi, all--
I would like to have a default value ("Undetermined") for the "Associated Account" read-only picklist value. I have an account record of this value for this purpose. This is because if there is no value in the field, the record will not be included in a report that includes the field. I do not want to make the field required at this point.
Field management doesn't appear to allow any default value for read-only picklists. Does anyone know how to get around this, either at the lead record stage or at the lead report stage (without resorting to an analytic, which won't work for what we are doing)?
Thanks.That's a great question. It doesn't appear as though you can select it from the typical method of Admin | Application Customization | Lead | Lead Field Setup | Associated Account.
Have you tried creating a workflow to populate the field using Before Modified Record Saved? -
Account Creation - Badi for Default values for BP Role and Sales Area
Hi all,
my requirement regards the possibility to create a new prospect (a link should be available in the navigation bar or create section).
Logically, a bp role as "Prospect" and particoular sales area should be created automatically.
I created an implementation for the BADI definition "BADI_CRM_BP_UIU_DEFAULTS". But don't know how to create the default values for BP role and Sales area:
In my code
assign cr_me->('VIEW') to <lv_view_name>.
if sy-subrc ne 0.
exit.
endif.
lv_viewname = <lv_view_name>.
case lv_viewname.
when 'AccountDetails.htm'.
I obtain the viewname "AccountDetails" , the related context "Header". After I don't know how to proceed to obtain the related entities through the relationship BuilRolesRel and BuilSalesArrangementRel.
Am I following the right way? Is there another solution to prepare the output for default values?
Any kind of suggestion will be appreciated.
Regards, Robertogo to spro>cross-application components>sap busines partner>business partner> basic settings>field groupings>Configure Field Attributes per BP Role
Double click the business role which you want to customaze (e.g. 'A') and change the proper settings.
Regards. -
What are the default values for the NetStream.multicast***** properties
I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
Sorry for my poor english, Thanks.the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream. in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit. setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher. if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4). this is for safety. we recommend you always leave push enabled.
each peer (including the publisher) can change the multicast stream parameters dynamically. changes are local to that peer.
for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called. example:
var ns:NetStream = new NetStream(netConnection, groupSpecification);
ns.multicastWindowDuration = 10; // change default for everybody
ns.publish("mystream");
ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick. overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received. -
How to set the Default values for Info Objects in Data Selection of InfoPac
Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CVHi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha -
Defining default value for financial reports display in the workspace (9.3)
Hi
I need to change the default value for financial reports workspace preview mode, for every workspace user. It is actually set on html, and I would like to have pdf instead.
This option can be changed when logged on the workspace, in file->preferences->financial reporting->default preview mode. However I want every user to start with the right settings, so they dont have to change anything manually.
I have tried to do it with Shared Services : under projects, BI+, assign preferences. From there I can change the default folder and the start page (the general preferences), however I cannot find the options for financial reporting.
Is there a way to change these values with hyperion tools ?
If not, is it possible to change it directly in the repository DB ?Thanks and best regardsWe looked at this about 2 years ago - from memory, you can only set preferences when the users are first setup in Shared Services, under the manage preferences section of the wizard.
I can't remember if there is a settings file you can edit for the default users - i think there is, but again this must be set before users are set up.
We looked at changing users preferences, but gave up on the idea as all users had been provisioned already :-(
Cheers, Iain
Maybe you are looking for
-
Dm4 wont boot- hard disk error but passes hard disk test
My dm4 laptop froze yesterday and I was forced to restart it- it is 3 years old but I have had no issues with it. When trying to reboot it will not start and if I run windows repair it comes up with the failed 2 hdd error. I thought it was a hard dri
-
App that syncs between Server and i-Device
Hi, I'm working for a construction company. We have a lot of pictures but, for the moment, we can't really use them for good purposes. We are investigating the possibility to give iPad's to our constructionsite leaders so they can access these photog
-
h:commandButton executing multiple times
I have a simple command button that gets its "action" from a method in a bean. However, the method in the bean sometimes takes a few seconds to finish before it returns the "action". In those few seconds, a user can press the enter key or the command
-
KE380 for finished good with released cost estimate
Dear Gurus, We have following error. No product costing estimate could be found Message no. KE380 Diagnosis In Profitability Analysis (CO-PA), the system tried to find a product cost estimate for product 20010412 in plant FA03 that uses costing varia
-
Hi, I will be publishing quite a few BW Queries into the Portal. 1. Anyone have any suggestions on how to organize them? (What have you done) (In folder by functional area, all in one IView Folder, in Folder by InfoProvider)