CHANGE EVENT CREATOR IN EVENT CONTAINER
Hello,
In CRM 7.0, I need to change in the EVENT CONTAINER the element &_EVT_CREATOR&, wich passes the value to the &_Wf_Initiator&.
Can you please tell me where the EVENT COINTAINER is populated (FM, program, etc)
Thanks.
Best Regards,
Filipe Pinheira
Hello,
Of course, you can't change the event creator after it's been created, but I assume that's not what you're asking.
Look at the parameters of SAP_WAPI_CREATE_EVENT and see if you can set the creator there.
If not, you could pass the name of the user as an event parameter and bind it to WF Initiator.
regards
Rick Bakker
hanabi technology
Similar Messages
-
Change the condition in event structures
Hi all,
I am a student, currently doing a project. I'm very new to labview and I don't really know much of the function in labview. Anyway, I have this timer made using event structure if I'm not mistaken (I downloaded this timer from one of the post in this forum). This timer will start at 0s, count to 20s, then stop. So what can I do to change the end time of this timer?? Let's say stop at 50s??
Attached is the program. Kindly please explain to me or modify the program and attached back as a reply. I've been trying to figure it out from the help function, but still don't understand.
Thank you very much in advance!!!
Solved!
Go to Solution.
Attachments:
TIMER s.vi 13 KBHi,
Thanks for your inquiry. The VI attached uses a couple of programming structures: While loop, Event structure and Case structure. What you would have to change is actually the case structure. Before we go to that, let us go through the different structures. Open up the block diagram by going to the Menu bar of the front panel and navigate to Window->Open block diagram.
The While loop is like a Do Loop in text based programming. It will execute until a condition is met. From the attached VI, it stops running when you click the exit button.
The Event structure is a structure which consists of subdiagrams. The structure responds to interactions with front panel objects. For example, if you click the start or stop button in the front panel, the event structure will switch to a case which corresponds to this interation. In the attached VI, the case, which corresponds to intreaction with the start or stop button, is called "Start", "Stop": Value Change. Each case will contain an event-handling routine.
Case structures are like switch statements in text programming. Take a look at the "Start", "Stop": Value Change event. It contains a routine which consists of a case structure. The case structure responds to the input terminal called Start (which is actually the start button on the front panel). The case structure switches between cases according to this input. To view the different cases just cycle through the case structure by clicking the left and right buttons. There are only two cases: True or False as the input is a boolean.
Now lets take a look at the VI. Take a look at the "Timeout" case of the event structure. This is where the modification needs to be made. Modify the case structure by editing the cases. Change the numbers in case structures: ..20000 to ..50000 and 20001.. to 50001.. This should do the trick.
Regards,
Alan Bong -
Change the colour of events in iCal
I need to change the colour of events/appointments in the Mac iCal. I have imported all of my Outlook calendar via google sync and all my appointments are now just one colour. I have my medical appointments coloured in orange so they stand out each week (I have many) and all my personal events a different colour, and my volunteer work a different colour so that I can see at a glance in week view what I am up to. Looking at one week with every appointment in one drab colour is not nice.
I notice that different calendars are different colours, but I dont want separate calendars as I need to sync with google to share the calendar with Android phone and iPad.
Please can you let me know how to turn this feature on. Many thanks.Click calendars at the bottom of the page the click on the i symbol for info and then you can select the colour you'd like.
-
How do you change the color of events on ICal.
How do you changed the color of events on ICal? I was able to do this when I utilized ICal on the Snow Leopard system but can no longer do this with Lion.
I know that I can select the Calanders list, but when I create a new "Calander" it doesn't allow me to choose a color and it doesn't show up in my list when working within an event.
Thanks!Phoebe,
Right-click on the new calendar and select "Get Info."
Make sure that the ✓ mark is selected.
Then choose the color from this pane: -
Need notification on shared calendar of any changes/modifications to an event
I share a few calendars with co-workers and family members. When one or the other made any changes/modifications to an event, it notified both parties but since the new updates, we no longer get the notifications. The changes show up on the calendar but no alert to notify of the change which defeats the purpose because we need to know about the change prior to the actual event.
Hi cooks38401,
Thanks for the question. After reviewing your post, it sounds like you are not receiving Notifications from Calendar. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Calendar: Get Calendar notifications
Calendar: If you’re not receiving alerts
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
G'day. I am using iMovie 11 and need to clear disk space. How can I do that using an external drive, leaving me the option to go back and make changes or access old events or projects from that external drive?
The slightly bigger question is whether you want to move all movie content to the external drive (essentially meaning that drive will always need to be attached when you're working with your videos), or whether you just want to archive older videos off to the external drive.
If you want to move all videos, then just move the 'Movies' folder in your home directory to the external drive, then create an alias of the external 'Movies' back in to your home directory. Now the 'Movies' icon in your home directory will point to the external drive and everything will just work (as long as the external drive is attached when you launch iMovie)
If you want to archive older movies then each Movie should have its own subdirectory within your Movies folder. These can easily be moved off to the external drive, and moved back should you ever need to work on those movies again. -
Revision: 16810
Revision: 16810
Author: [email protected]
Date: 2010-07-03 03:32:49 -0700 (Sat, 03 Jul 2010)
Log Message:
Changed close event from flash.events.Event.CLOSE to mx.events.CloseEvent.CLOSE. See MXML examples in PopupTest.
Modified Paths:
cairngorm3/trunk/libraries/PopupTest/src/samples/ModulePopups.mxmlHmmm Strange!!!
Seems like a bug which requires target for parallel effect while hide only but does not set it.
For the time being you can remove the sequence effect as there is no othe effect other than parallel and use effect like
<mx:Parallel id="fadeOutTw">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
or you can also set target explicitly like :
<mx:Sequence id="fadeOutTW" >
<mx:Parallel target="{largeImgTW}">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
</mx:Sequence>
I have tested on this code, and works fine. Hope this helps you
-Vikash -
Revision: 16809
Revision: 16809
Author: [email protected]
Date: 2010-07-03 03:05:21 -0700 (Sat, 03 Jul 2010)
Log Message:
Changed close event from flash.events.Event.CLOSE to mx.events.CloseEvent.CLOSE. See MXML examples in PopupTest.
Modified Paths:
cairngorm3/trunk/libraries/PopupTest/.actionScriptPropertiesHmmm Strange!!!
Seems like a bug which requires target for parallel effect while hide only but does not set it.
For the time being you can remove the sequence effect as there is no othe effect other than parallel and use effect like
<mx:Parallel id="fadeOutTw">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
or you can also set target explicitly like :
<mx:Sequence id="fadeOutTW" >
<mx:Parallel target="{largeImgTW}">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
</mx:Sequence>
I have tested on this code, and works fine. Hope this helps you
-Vikash -
Revision: 16808
Revision: 16808
Author: [email protected]
Date: 2010-07-03 03:04:40 -0700 (Sat, 03 Jul 2010)
Log Message:
Changed close event from flash.events.Event.CLOSE to mx.events.CloseEvent.CLOSE. See MXML examples in PopupTest.
Modified Paths:
cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpBase.as
cairngorm3/trunk/libraries/PopupTest/.actionScriptProperties
cairngorm3/trunk/libraries/PopupTest/.flexProperties
cairngorm3/trunk/libraries/PopupTest/src/PopUpMXMLExample.mxml
cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopup.mxml
cairngorm3/trunk/libraries/PopupTest/src/samples/ZoomAndFadePopUpBehavior.mxml
cairngorm3/trunk/libraries/PopupTest/src/samples/parsley/ParsleyPopup.mxml
Added Paths:
cairngorm3/trunk/libraries/PopupTest/src/samples/ModulePopups.mxmlHmmm Strange!!!
Seems like a bug which requires target for parallel effect while hide only but does not set it.
For the time being you can remove the sequence effect as there is no othe effect other than parallel and use effect like
<mx:Parallel id="fadeOutTw">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
or you can also set target explicitly like :
<mx:Sequence id="fadeOutTW" >
<mx:Parallel target="{largeImgTW}">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
</mx:Sequence>
I have tested on this code, and works fine. Hope this helps you
-Vikash -
Revision: 8271
Author: [email protected]
Date: 2009-06-25 16:25:28 -0700 (Thu, 25 Jun 2009)
Log Message:
Change the event type of List-based component's change, changing and caretChange events to a new event class: spark.events.IndexChangeEvent.
QA: Yes
Doc: Yes
Checkintests: Pass
Mustella: List/DDL/ButtonBar tests pass
Reviewers: Hans & Jason
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/events/IndexChangedEvent.as
flex/sdk/trunk/frameworks/projects/spark/asdoc/en_US/spark/components/examples/ButtonBarE xample.mxml
flex/sdk/trunk/frameworks/projects/spark/asdoc/en_US/spark/components/examples/DropDownLi stExample.mxml
flex/sdk/trunk/frameworks/projects/spark/asdoc/en_US/spark/components/examples/ListExampl e.mxml
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/ButtonBar.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ListBase.as
Added Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/events/IndexChangeEvent.asAre those components in a SWC? I would expect them to also have a namespace
that looks more like http://.....
Otherwise, make sure the path to the components are correct. -
Change calendar format one event at a time?
How do Change calendar format one event at a time?
Use iPhoto>Provide iPhoto Feedback in iPhoto or go here to make a feature request of Apple:
http://apple.com/feedback -
[svn] 3305: Change visibility of messageHandler(event:MessageEvent): void from private to protected.
Revision: 3305
Author: [email protected]
Date: 2008-09-22 17:44:38 -0700 (Mon, 22 Sep 2008)
Log Message:
Change visibility of messageHandler(event:MessageEvent):void from private to protected.
Bug: NA
QA: No
Doc: No
Checkintests Pass: Yes
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.ashttp://forum.java.sun.com/faq.jsp#format
-
How to add selection event, change event and click event for dropdownlist for mobile applications
Please someone help me in writng selection , click and change events for dropdownlist in flex for mobile applications . i have tried but i wasn't able to select the items in dropdown using my mouse or touch in my mobile . Please help me I am struck at this point and i am unable to get solution gfor this. Please................
Some code for which i neederd help:
<s:DropDownList id="ddlBranch" x="257" y="475" width="63%" height="80%"
creationComplete="ddlBranch_creationCompleteHandler(event)"
fontFamily="Calibri" fontSize="24"
labelField="BranchName"
prompt="{ddlBranch.selectedItem}"
requireSelection="true"
selectionColor="#7ab342">
<s:AsyncListView list="{getBranchResult.lastResult}"/>
</s:DropDownList>
<s:DropDownList id="ddlZone" x="257" y="546" width="63%" height="80%"
creationComplete="ddlZone_creationCompleteHandler(event)"
fontFamily="Calibri" fontSize="24"
labelField="ZoneName"
prompt="{ddlZone.selectedItem}"
requireSelection="true"
selectionColor="#7ab342">
<s:AsyncListView list="{getZoneResult.lastResult}"/>
</s:DropDownList>
I will get the list of Branches(first DDL) and Zones(Second DDL) from a webservice written in DOT(.)NET, what i needded is touch events and selection events for both the dropdown lists and the data in the second DropDown List should bind based on the First Dropdown list item selected.
Service call for binding data to DDL:
protected function ddlBranch_creationCompleteHandler(event:FlexEvent):void
getBranchResult.token = loginService.getBranch();
protected function ddlZone_creationCompleteHandler(event:FlexEvent):void
getZoneResult.token = loginService.getZone();
Please help...
Thank you.Therer are two ways you can assign an action to the "OnEnter"-event of your input field:
1. in method cl_wd_input_field=>new_input_field you have the parameter:
ON_ENTER
You just have to assign your action name to this field and it will be called on the OnEnter-event of your InputField.
e.g:
lr_input_field = cl_wd_input_field=>new_input_field(
id = 'INP_MY_INPUT_FIELD'
on_enter = 'MYACTION'
2. You can use the method SET_ON_ENTER.
like:
lr_input_field->set_on_enter( 'MYACTION' ).
Just make sure, you have created and implemented this action and its handler. -
My calendar keeps deleting new events and if I make a change to an old event it keeps reverting it back to its original time. How do it stop this from happening?
How do you update it? Basically what has happened my password was disabled for "security reasons" on sunday (21/10/12), so i tried to reset it, but for some reason i couldnt get into my old email (probably because i havent used it for 2 years), so i read on here i could swap it to a new email that i currently use (which is what i have done) ive swapped everythin over to it (facetime, iCloud etc) but keeps coming up with old email and asking for password
-
Old How to find total number of events in an event list?
Hi,
I am developing a j2me application. i Want to find the total number of events in an event list.(ie, If it contains 15 events then it should return length as 15).
Not the length of EVENT LISTS i want to find the Length of EVENTS.
Thanks,
kumarHi,
you can find the number of columns and their order using
the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = sy-repid
I_INTERNAL_TABNAME = 'ITAB'
I_INCLNAME = sy-repid
changing
ct_fieldcat = IT_FIELDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif
now describe your fieldcat . and find no of columns.
and their order also..
regards
vijay
Maybe you are looking for
-
My Battery had a meltdown in my Macbook pro last summer. I was fortunate enough that I removed it before any real damage was done to my computer, however I'm not sure of the correct model of my computer or where to find the correct battery for it. I
-
Is there a way to open a new tab/window by clicking the Safari dock icon?
Is there a way to open a new tab or window by clicking the Safari dock icon? Right now, the default behavior seems to be that Safari simply un-minimizes or displays the last window in focus. I want to be able to quickly fire up a new tab or window in
-
'no internet connection', but there is. Cannot update anything.
After installing mountain lion my macbook pro works fine except for installing updates in appstore etc. even system updates. connecting to appstore works but when I go to updates get a message that there is no internet connection, but there is!!!!! H
-
Process IT2011 ?when have wrong time event records?
hi, We uploaded the all time events records to SAP from time recording system and maybe it is lost clock in or clock out records in such case we need to reduced the hours of that day to half. my question is : how to reduce the number of hours to hal
-
Add Image button on Gumtree unresponsive.
Whenever I try to post an ad on gumtree, I go to click on the "Add Image" Button and all it does is take me back up to the top of the screen. Doesn't refresh page or anything, just takes me back to top of page. Any ideas? It's frustrating having to u