Change font of a cell in add Table to Report
Hello,
Is there a way to change the font of an individual cell in the add table to report VI?
Also is it posible to change the column width of a selected column?
Thanks
Dan
Hi Dan,
i think to get what you want you can only use a html report. There you have to create your own "HTML Report Table Row.vi" with the font tags for each cell.
Mike
Similar Messages
-
How to change colour of the Cell in a table
Hi,
Could you please let me know how to change the coluor of the cell at table.
here i m having a column called "STATUS". i m getting data from backend and filling this column with two values(success/failed).
when i get success, the cell should be in green color, when it is failed cell color should be red.
i followd below:
created a context attribute "color" of type
com.sap.ide.webdynpro.uielementdefinitions.TableCellDesign
i binded this with the column proerty "cellDesign".
when i executed bapi i sohlud get different colors according to output.
here is my execute function
wdContext.currentZemp_Compare_InputElement().modelObject().execute();
wdContext.currentUploadElement().setStatus(wdContext.currentMessageElement().getSuccess());
if(wdContext.currentMessageElement().getSuccess().length()>6)
wdContext.currentContextElement().setColor(WDTableCellDesign.GOODVALUE_LIGHT);
else
wdContext.currentContextElement().setColor(WDTableCellDesign.BADVALUE_LIGHT);
but when i get value failed it filling red for all other cells in that column
when i get value success, cells all r filling with green.
how can i get only perticual cell colur should b green/red.
plz try to solve this problem.
wer i need to do changes?
thanks in advance
venkatHi,
For your scenario, you need to have two cellVariant as TableStandardCell (say successTSC & failTSC). Add tableCellEditors to these 2 TableStandardCell as you like. Mark there variantKey property as var1 & var2 respectively.
Do change the cellDesign as you like the color for the TableStandardCell.
Bind an attribute selectedVariant to your column selectedCellVariant property.
Now in wdDoModify you can write:
for(int i=0;i<wdContext.nodeCountries().size();i++){
if(wdContext.nodeCountries().getCountriesElementAt(i).getStatus().equals("SUCC")){
// Here node countries is the datasource of your table.
wdContext.nodeCountries().getCountriesElementAt(i).setVariantKey("var1");
} else if(wdContext.nodeCountries().getCountriesElementAt(i).getStatus().equals("FAIL")){
wdContext.nodeCountries().getCountriesElementAt(i).setVariantKey("var2");
The article below will definetly help you in your requirement.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0310fd2-f40d-2a10-b288-bcbe0810a961]
Hope this will surely solve your problem.
thanks & regards,
Manoj -
Change font size/type in all cells of table
Hi,
I cannot figure out how to change the font size/type in an existing table. There seems to be no way to select all cells and make a global change.
I can select individual columns and rows, and change the font for these, but that is tedious.
Anyone help?Click in one cell
Select all
cmd + T to get the Font panel then select the font and the size.
Yvan KOENIG (from FRANCE jeudi 11 septembre 2008 21:15:51) -
I want to programmtically change the font of one cell at a time in a LabVIEW table
I want to programmtically change the font of one cell at a time in a LabVIEW table. How would I do this. I know it is possible to change an individual cells font properties on the front panel but I want to do it via the diagram (code).
You are able to change each cell's background and foreground (text) color, but it seems the ability to specify font information with properties is lacking in both 6.1 and 7.0.
Daniel L. Press
PrimeTest Corp.
www.primetest.com -
I can change the font and size in the body of a Pages '09 document with the following script:
tell application "Pages"
tell document 1 to tell body text
set font name to "Times"
set font size to 14
end tell
end tell
But, it won't change the font inside a table, which is what I want.
I have tried this script:
tell application "Pages"
tell document 1 to tell table text
set font name to "Times"
set font size to 14
end tell
end tell
Which produces this: -- error "Pages got an error: Can’t make text into type integer." number -1700 from text to integer
Any help appreciated.After many trials and errors, I didn't find any better way to open the "Blank" template than to open its file directly (/Applications/iWork '09/Numbers.app/Contents/Resources/Templates/Blank.nmbtemplate).
So here's an improved version of the script that should now work properly for anybody (at least I hope so):
--BEGINNING OF SCRIPT:
tell application "Pages"
launch
make new document at front
tell body text of front document
set alignment to center
add table
set shadow of table 1 to true
select table 1
end tell
activate
tell application "System Events" to keystroke "c" using command down -- copy to the clipboard with ⌘C
end tell
tell application "Numbers"
--Open the "Blank" template:
open POSIX file "/Applications/iWork '09/Numbers.app/Contents/Resources/Templates/Blank.nmbtemplate"
activate
--Paste table 1 into a new Numbers document:
tell application "System Events"
set theSheets to outline 1 of scroll area 1 of splitter group 1 of splitter group 1 of window 1 of process "Numbers"
select row 1 of theSheets -- sheet 1
select row 2 of theSheets -- table 1 of sheet 1
key code 51 -- delete key
keystroke "v" using command down -- paste the contents of the clipboard with ⌘V
select row 1 of theSheets
end tell
--Change the contents and format of the second row of the table:
tell table 1 of sheet 1 of front document
set value of cell 4 to "Isn't"
set value of cell 5 to "that"
set value of cell 6 to "nice?"
set font name of row 2 to "Times"
set font size of row 2 to "24"
set text color of row 2 to {65535, 0, 0} -- red
set alignment of row 2 to center
end tell
--Copy the modified table to the clipboard:
tell application "System Events"
select row 2 of theSheets -- table 1 of sheet 1
keystroke "c" using command down -- copy to the clipboard with ⌘C
end tell
quit without saving -- optional
end tell
tell application "Pages"
activate
tell application "System Events" to keystroke "v" using command down -- paste with ⌘V to change table 1
end tell
--END OF SCRIPT -
Change font size of an table with javascript
Hello!
i am new to developing in javascript as well as to indesign. i have to make a few changes to an existing script. in a user dialouge i get the font size in which the imported table should be. but how can i change the font size of an table???
please respond as soon as possible. thanks very much in advance.
moketasHi
do you want do like this (rightside) ?
To apply font to each cell, you must access TextFrame => Table => Cell => any TextObject
var doc = app.documents[0];
// two textframes, they have a table (2x2)
var tf_one = doc.textFrames[0];
var tf_two = doc.textFrames[1];
//applied to story
tf_one.parentStory.appliedFont = "Myriad Pro\tLight";
tf_one.parentStory.pointSize = 24;
//not effective against table text
//applied to text-object of each cells of table
tf_two.parentStory.tables[0].cells.everyItem().texts[0].appliedFont = "Myriad Pro\tBold";
tf_two.parentStory.tables[0].cells.everyItem().texts[0].pointSize = 24;
thank you
mg. -
How do you change/adjust border width for all the cells in a table created in Pages?
How do you change/adjust border width for all the cells in a table created in Pages?
Note- I am trying to figure out how to create and format tables in the latest version of the Pages app on an iPad air (iOS 8.1.1.1) . Creating tables, adding or removing borders for individual/all cells in a table seems straight forward. However the default border style seems to be a heavy black line. How do I change this?
I found the option add or remove borders for all/ individual cells in a table, however I can't find any option within style/format dialogue screens for changing colour or line thickness for table cells. Likewise I can't find any clear instructions on how to do this in apple help pages or support website
Btw- I'm assuming it is possible to customize/adjust the colour & thickness of selected lines in a table created in this app (it's fairly easy to do this word processing apps like MS Word) please let me know if this is not actually possible in PagesThey know perfectly well what they took out of Pages '09.
Well over 90 features.
Do you think you posting feedback is going to remind them of what they did?
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter -
Need a formula to calulate multiple cells and add the sum total to a cell in a other table
Im a chef and my monthly inventory is a time consuming task. I get invoices from multiple suppliers on each day of the week. I enter them into a spread sheet and then need to add the sum total for all the invoices for say MONDAY. That total needs to be entered into a cell in another table called "daily spend". Is there a formula to automatically add say all the invoices from monday and input the daily spend cell on that table. Here is an example
I created a column B-to give each day a number(sometimes multiple invoices come from the same supplier for each day)<GREEN>..If there was a way to do this differently...Im happy to change the layout of the spreadsheet. I want to add the total $ (column F) for each day together(all the blue fields) and then insert the total into another cell seen in the next table . So in this example its F4+F16+F17=?, ? inserted into N2 of the next table
Thanks so much"I ve finally has a play with the advice you gave me but I have realized that the formula you gave me is for a week....and like I mentioned in my reply to you, one table is weekly the other is monthly....is there a way to overcome this? (my answer to you explains it)"
Hi Gavin,
Unfortunately, the scale of your illustrations in that reply made them difficult (or impossible) to read, even on the Retina screen.
The first formula, used to fill column B, extracts the Weekday number for each date. Since these numbers should be equivalent to the day of the month, You'll need to replace this with a formula that returns the Day value of each date:
Old:
B2: =WEEKDAY(A,2)
New:
B2: =DAY(A)
Fill down to end of column.
Because of the arrangeent of your Data table, you will need to repeat this formula in column H (with references to column G), etc. for each set of dates in the table.
The SUMIF formula in column F is fine as is, except that it assumes all condition data will be in column B of Data, and all data to be summed will be in column F of Data. Since this is obviously not the case for your Data table, you will need a separate iteration of the formula for each week in the table, with the four SUMIF statements enclosed in a SUM statement:
E2: =SUM(SUMIF(Data :: $B,A2,Data :: $F),SUMIF(Data :: $H,A2,Data :: $L),SUMIF(Data :: $N,A2,Data :: $R),SUMIF(Data :: $T,A2,Data :: $X))
Fill down for as many rows as there are days in the month being summarized.
Column references in the formula assume that six columns are used for each week, and that there is no gap in the table between weeks.
Note that the formula does not distinguish between transactions on July 7 and those on June 7 or August 7. Because of this, the Data table must be limited to transactions in a single calendar month.
Regards,
Barry -
Hi,
I want to change font in a table. It's the only item in the document. Selecting all, and changing font doesn't change anything. It does change any text I subsequently type outside the table, but not the table itself. Adding another row to the table uses the table font. Selecting an individual cell before changing font doesn't change anything either. Selecting the text within the cell before changing font does work, but it would be time consuming to do the whole table like this.
Hope you can help,
Tris.DennisG wrote:
Tris,
After I read your post, I tried changing typefaces in a table, and it's not as intuitive as it should be.
My favourite word processor, TechWriter, uses a menu so you can choose what aspect of the text you want to select at the point at which the caret is, be it Document or Chapter, down to Table row or Table cell.
But there's a method that worked well for me. Double click on the first cell to select it. Hold down the Shift key, then click on the last cell. The whole table should be selected. Now change the typeface.
Works for me, thanks. I'd still like to know how to inspect the style for the table though. -
I'm having some difficulties with a couple of weird UI / Font related changes. Have anyone else experienced this or have a solution?
I'm using:
Microsoft Project Professional 2010
v. 14.0.7106.5003 (32 bit version)
1. When I try to fill a row with a color - MSP2010 changes the font and fontsize:
https://www.dropbox.com/s/6cyudoi3i88owln/UI-Bug_fontchange_mini.avi
This is just one example, when changing fonts I have issues all the time. For example MSP sometimes adds new activities with the same font as all other activities (Arial 8pt) and other times decides that it shoud use (Calibri 11pt).
2. When I expand all subtasks in outline MSP says that values of custom cells have changed:
(look at column called "Verkligt arbete.") Custum formula is: [Tal1]*[Tal2]/100
https://www.dropbox.com/s/jive7nrqbmmqcia/custom%20column%20change.avi
3. Filter does not filter out summary activities
https://www.dropbox.com/s/ytmskqhtfxg5i7a/Filter%20issue.png
I do reccomend that you download the video files since Dropbox renders them at lower quality when watched on their homepage.
To be completely honest, I'm trusting Microsoft Project 2010 less and less each day I use it. If the basic stuff does not work, how can I trust that the more advanced things does work?PrGus,
Yes updates are cumulative but the reason I don't normally recommend users install the latest update is that cumulative updates do not receive the same level of thorough testing that service packs receive. The
following "disclaimer" is attached to each cumulative update:
"However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might
receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update (i.e. service pack) thta contain this hotfix".
The June 2013 cumulative update was released after SP2 and contains a significant number of fixes. Cumulative updates since then have had very limited functional changes. That's why I recommend the June 2013
cumulative update but do not normally recommend the latest cumulative update.
All updates can be downloaded from: http://technet.microsoft.com/en-us/office/ee748587
John -
is there a way to make a number of cells add to a certain number. I need 5 or 6 cells to add to 1700. If one of the cells becomes 0, I need the other cells to change so the bottom number stays at 1700.
Okay then. If your seven numbers are in column B then the formula next to each number in column C would be
=IF(B=0,0,1700/COUNTIF(B,">0"))
This assumes all non-zero numbers are positive numbers. The sum will be 1700. -
How to change font size in a table?
How to change font size in a table without using the font style of another document? Please show a sample script. Thanks!
Hi Dave,
Thank you so much for the email. I tried every object and method I can
posibly think about such as
myTable.Rows.Item(1).PointSize = 24
myCell.Characters.Item(1).PointSize = 24
I got error message all the time. These objects don’t support PointSize.
All I need is to change point size of the text in InDesign tables created
using VBScript. Could you help me with this? Thanks,
Regards,
Li -
How do you set defaults in pages such as font and moving between cells in a table?
How do you set defaults in Pages such as font and moving between cells in a table?
Default layout and styles can be set by setting up a sheet with your settings and saving as a user template (File > Save As Template). I don't know of a way to set defaults for moving between cells in a table.
-
Can i change fonts or add them to my iphone
Hi, can I change the fonts my iphone uses or add things like emoticons etc?
You can't add fonts.
Change the fonts with what?
There is at least one app available via the app store for emoticons - Emoji, which is free. -
Change font programmat​ic in a table
Hey,
is it possible to change font in a table at Runtime. In my application I have various lines of data representing in a table.
Problem: How many lines to initialize with different font and font-size.
Thanks for help
geotosHello Geotos,
Unfortunately, the current version of LabVIEW does not support this feature.
But you are not the first requesting this functionality, so chances are very good that it is included in the next release (LabVIEW 8).
Best regards
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany
Maybe you are looking for
-
Paint performance with JScrollPane very slow in jdk 1.4?
I got a simple program that overrides paintComponent on a JPanel. Then draws lots of lines, rectangles and some strings. The panel is then added to a scrollpane. The scrolling is very smooth in java 1.3.1, but very slow in 1.4.2 the paintComponent ta
-
I have recently upgraded my iPad 2 to iOS7. I am not happy because it is locking up. It takes almost 45 seconds to enter my four digit code. When I type an email it takes 10 to 12 seconds for the letters to appear.
-
Oracle developer suite installed under a different Oracle Home
I have Oracle 10g r2 installed on a RHAS4 server. I installed Oracle developer suite 10.1 on this server. In the installation procedures, there are specific instructions to not install it under the ORACLE_HOME for an existing database installation. O
-
Installing Smart Card Reader Software
I'm trying to install a cherry smart card (CAC) reader on my iMAC G5 OSX 10.4.11. I have downloaded the driver but see that I need to install PCSC lite 1.1.1 of PCSC Framework before loading the driver. To load those middleware products I have to per
-
Help with erasing and syncing please - what will be erased?
I have somehow created a 2nd itunes account and my iphone won't sync with the first one. It is syncing with the 2nd one however I cannot add new music - if I try on the 2nd one I get a message asking if I want to erase this iphone and sync with this