Change in logic for selecting the Bin while creating Transfer Order
Hi ,
Currently the system follows SAP process of BIN selection which is as mentioned-
With stock removal strategy Partial Pallet Quantity (A), system follows below steps to find the storage bin:
1.SAP always compares the requested amount from the Transfer Order with the largest bin amount available in the stock.
2.If the requested quantity of the transfer order is the same as or larger, the system removes the material from the largest bin amount first.
3.If the requested quantity is smaller, the system removes the material from a storage unit for partial quantities in ascending order.
Now the customer has requested a change which is -
It wants to take in BIN in the FIFO order followed by partial pallet .
Question is - Is this possible ?
Cheers
Disha
Hello,
May I add something to the discussion.
If you are calling "OMLJ", you see on the left side the secion "Transfer requirements". If the box for "Manual TO creation not allowed" is ticked, you are not able to create the TO's by the manual transactions. Then only the system is allowed to create the TO's, for instance with the report RLAUTA10.
I hope this anweres your question.
Best regards
Uwe Neuman
Similar Messages
-
Error While creating Transfer Order
Hi all......
Im trying to create Transfer Order with ref. to Transfer requirement in LT04, and getting the following error.
"This screen is only allowed for manual transfer orders".
Can any one tel which transaction I hve to use ? And I need User manuals for WM transactions.
Thanks n Regards
DurgaHello,
May I add something to the discussion.
If you are calling "OMLJ", you see on the left side the secion "Transfer requirements". If the box for "Manual TO creation not allowed" is ticked, you are not able to create the TO's by the manual transactions. Then only the system is allowed to create the TO's, for instance with the report RLAUTA10.
I hope this anweres your question.
Best regards
Uwe Neuman -
User Exit for maintaining Checking Rule while creating Sales Order
Hi Gurus,
I have a requirement where I need to assign a particular value to Checking Rule (VA02 -> Display Availability Button -> Checking Rule field (beside Checking Group field)) while creating a Sales Order in SD (via. IDOC's).
In my requirement, within one Checking Group there are multiple checking rules assigned. When I am trying to assign the checking group in userexit_move_field_to_vbap (include MV45AFZZ), it is picking up the default checking rule ('A') and not the customized one defined for our requirement.
Is there any other user exit within which I can directly assign the Checking Group and Checking Rule while creating the sales order, please suggest.
Regards,
Arvind.You can use userexit 'USEREXIT_MOVE_FIELD_TO_VBAP' in include MV45AFZZ. This is executed every time a user changes anything on a material (e.g. put in a material number) and hits return. Just raise your pop-up window there if the user puts in the particular material you are talking about. The material number is available in xvbap-matnr.
Hope that helps,
Michael -
Facing the problem while creating sales order
Hi,
I am facing the problem while saving the sales order.
Error in system xxx/400 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
Transmission log
u2022Product cannot be recoded for ERP System xxx/400(Notification E CRM_ORDER_MISC 015)
u2022Product cannot be recoded for ERP System xxx/400 (Notification E CRM_ORDER_MISC 015)
Kindly assist me.
MadhuHi Madhusadan,
Can you check whether the product exists in the ERP System or not? You can take the product names and can check the same using the Tcode: MM03 in ECC System. Also, it would be good if you have a look at the product from the CRM System if there are any errors or the product is already archived.
Is the Sales Order you are creating from a Preceding Transaction ?
Hope this helps.
Thanks,
Samantak. -
Error message while creating transfer order
Hi Experts,
My objective is to create a transfer order from a transfer requirement programatically.
I am trying to create a transfer order using FM L_TO_CREATE_TR programatically. Prior to this FM, I am calling FM L_TR_CREATE to create a transfer requirement. I am passing this transfer requirement to FM L_TO_CREATE_TR to create a transfer order.
But on execution of L_TO_CREATE_TR , I am getting an error message: THIS SCREEN IS ONLY ALLOWED FOR MANUAL TRANSFER ORDERS as a status message in the program.
Please tell how to solve this.
Thanks,
Sangeeta.Hi,
Check whether following link is helpful
http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/lt04-from-lb01-1239928
Regards,
Dhana -
BOM not exploding for CR doc. type while creating sales order.
Hi Experts,
I have a problem in BOM. When created the BOM with sales doc. type OR, then BOM exploding as usual and picking pricing for main item.. But when I tried for sales doc. type CR, then the BOM is not being exploding and also pricing is also not picking. Can any one help me for this problem.
Thanks in advance,
Raksha.Hi,
Go to VTAF billing to sales document copy control and check below settings:
Header:
Data Transfer -052 Billing doc header
Data Transfer Buis - 103 Billing bus header data
Data Transfer Part - Billing Header Partner
Copying requirements - 021 Billing Header
Check Copy item number
Uncheck complete reference
Item:
Item Cat proposal G2N Request
Item TAN - Standard item
Data Transfer -153 item from Billing doc
Data Transfer Buis - 104 Billing bus Item data
Data Transfer Part - 004 Billing Item Partner
bl.pl - Leave it blank
Copying requirements - 303 Billing Header
uncheck copy schedule lines and do not copy batch
check update document flow
Pricing type - D
Leave blank - Campaign Deter.
Points to add: If you create without reference to an invoice then it would not explode BOM in RE return order because the configuration not set in REN item category.
As a standard business process return orders always create with reference to invoice.
regards
rc gopi -
Reg : change pointer mechanism for triggering the IDOC for delivery note
Hi ,
I am working on a change pointer mechanism for triggering the IDOC for delivery note and will be using this message class DESADV.
So SAP has suggested for assigning the message class DESADV with the function module in MASTERIDOC_CREATE_SMD_DESADV in BD60 transaction code.
So I was looking to create this MASTERIDOC_CREATE_SMD_DESADV function module in SAP and SAP suggesting that we should create this MASTERIDOC_CREATE_SMD_DESADV function module as same as the function module MASTERIDOC_CREATE_SMD_MATMAS.
So do anyone knows that is there any tool has been provided by SAP for creating this function module MASTERIDOC_CREATE_SMD_DESADV in SAP system for triggering the change pointer mechanism for outbound Delivery.
Thanks !
Regards,
KiranHi,
When you are change pointer the system itself will take care of sending the changed master data to your partner system and the user will not have any intervention. If you really wanted to have that then you need to use the change pointers to read the master data which is modified in a custom program and then display that on the screen. Once the user selects that master data records then trigger an IDOC for creating the idoc for that master data and also flag that master data record as processed in the SAP BDCPS standard table, so that the same record will not be picked. If you wanted to know how the change pointers piece of code is written go through the program RBDMIDOC and you can understand how the change pointers logic is written.
Thanks,
Mahesh. -
Open qty errin Selection list For Ref Doc. screen while converting to order
Hi SAP Gurus,
For one of my materials, the open quantity is not updating in the Selection list For Ref Doc. screen while converting to sales order.
Can you please help me?
Thanks,
KetanHi Senthilkumar,
I really appreciate for your kind Hint of SEL ID.
I created and assigned new 'Sel Priority' to the SEL ID same as for Routing.
Now while converting Planned order to Production order system is asking for Reference operation set as there is no such need of Routing as I already mentioned in previous post.
Regards, -
i am getting "could not save list changes to the server" while creating a new form in SharePoint Designer.
Actually the list was created with a custom content type. When i try to create a new form from the custom content type, it fails.
However, when i try to create a form using item content type, it creates a form successfully.
Could you please let me know hte workaroud for this.
TnxHello,
This link may be help you to create custom form using content types:
http://blog.splibrarian.com/2011/03/21/using-content-types-to-modify-the-newform-aspx-and-editform-aspx-pages/
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help <br/>(On vacation from 16th Oct to 28th Oct 2014) -
Print program for the smartform for selecting the output type (email/fax)
Hi All,
Requirement :I have to create a print program for the smartform where the output type may be print out,email or fax ,so i need to put the condition for selecting the output type (like printout,email,fax).
can any body please let me know how to put the condition for selecting the desired output type ?
Thanks in advance
RahulHi
It is not the output type that has to be changed
it is the MEDIUM which you have to change and configure
for printout medium is 1
for FAX medium is 2
for MAIL it is 7.
so instead of printout change the medium to 2 or 7 for the same output type and attach to the same driver program and smartform/form.
Reward points for useful Answers
Regards
Anji -
SAP logic for calculating the replenishment requirement - IS Retail
Hi All,
Could you explain from where does the RPLRQ field is getting picked up from the WRPT table.And what is the SAP logic for calculating the replenishment requirement for a particular article.
Regards,
PSSDear PSS,
Field RPLRQ represents for the replenishment requirement determined in the previous replenishment run. This can be changed when follow-on documents are created if order optimizing is active (for example, if quantities are to be rounded off).
Bye,
Muralidhara -
how can I change an email for authorization, the email address we used years back, is no longer a valid email address
SfromW wrote: ... how can I change an email for authorization, the email address we used years back, is no longer a valid email address
How to change account here: http://support.apple.com/kb/PH1641
If you need more help, start here: http://www.apple.com/support/itunes/
SfromW wrote: ... we can't remember the password from the old email address (for authorization)...
Help Retrieving and changing passwords here: http://support.apple.com/kb/HT1911
If you need more help, from iTunes for Windows, click iTunes > iTunes Store > Support
SfromW wrote: ... apple should make it easier to transfer authorization authority....I would think anyways.
You might want to rethink your thoughts about making transferring authority easier. Making it too easy would certainly degrade your account's security. If you still believe it should be easier, you can send feedback directly to Apple via http://www.apple.com/feedback/itunesapp.html
You will not get a response, but you can be certain that the responsible Apple people will see your input for consideration in FaceTime product development.
As a new user, please understand that you are NOT directly addressing Apple here. For more info about Apple discussions, start here: http://discussions.apple.com/static/apple/tutorial/etiquette.html
Message was edited by: EZ Jim
Mac OSX 10.7.4 -
Item availability for selected items and directly create the delivery
Hi All,
For a very big sales order ..lets say having 700 line items ...is there any convenient way to create the delivery for selected items ..e.g. 30-40 line items rather going and selecting the line items then doing the item availability.
do you have any LSMW format by which we can do the item availability for selected items and directly create the delivery.
kindly Guide me..
With Regards
Azeez.MohdHi ,
There is no stand way of doing it . You need to take help of abaper to do this :
1. Create a t code where if you give sale order number , it displays a report with all the items with a check box near to it as we see in SE16 .
2. This report could be best in ALV form where users can do "ctr+f" and search only the required materials then select those lines and press a button on the top of report .
3. Once the button is pressed , program will run vL01n ( create delv in backgrnd) in a BDC form . At time of delev creating , the bdc program in backgrnd uses only those items which were selected by user and not the other items .
4. Program will create a delv using a BDC in background and return the delv number for user to view tht.
U can also try using FM : RV_DELIVERY_CREATE to create delv in backgrnd after user selection if BDC is getting tricky.
Hopefully ,this shuld work and will be a easy process for the customers.
Let us know the outcome .. .
B O L ..
Hope this Helps !!! -
Query for selecting the 4 highest marks of the student
query for selecting the 4 highest marks of the student
Guys dont start an argument,
tey this one; please
Hi,
Try this
Top 4
Select ename,
sale
From dept d,
emp e1
Where d.deptno = e1.deptno
And &p > (Select Count(e2.sal)
From emp e2
Where e2.sal > e1.sal
And e2.deptno = e1.deptno
Order By 1,2
Bottom 4
Select ename,
sale
From dept d,
emp e1
Where d.deptno = e1.deptno
And &p > (Select Count(e2.sal)
From emp e2
Where e2.sal < e1.sal
And e2.deptno = e1.deptno
Order By 1, 2
&P you use any value say 3,4,5,6
This is top N analysis
Regards
Umesh -
Logic for determining the delivery address in PO
Hi,
We have a requirement (for a enhancment ) to get the country updated in the delivery address of a purchase order. Would be highly helpful if someone provide me the logic for getting the country key from the delivery address tab.
Our landscape involves SRM PO & ECC PO's and hence getting the details from Plant & s.loc will be o.k for ECC PO's , but for SRM PO's the details are updated from ship tp address.
Regards
SudhakarHi,
U can get the country key ( LAND1) in T001W table, by giving plant code, which u can get in EKPO ( WERKS) by giving PO no.
Also u can get in ADRC table, thr u need to input ADRNR no. which u will get from T001W table by giving plant code.
Maybe you are looking for
-
Win 7 pro 64, CS5.0 using InDesign 7.0.4 and Photoshop 12.0.4 x64. Using InDesign to create a manuscript with images. Right click on image to "Edit Original" Opens image in Photoshop. Make changes, go to save. Error message "Could not save x.jpg beca
-
Please help, how van i get itunes on my lenovo yoga with windows 8 - showing in my downloads but when i click on it it says that it cant run and get app from app store. any ideas
-
Problem with html:select field
I have two forms A and B, which I open from A. In B I have an <html:select property="X" and in A I have <html:text property="Y". In the javascript in B, I am trying to assign the document.B.Y.value as follows: opener.document.A.X.value = document.B.Y
-
Aluminum imac running osx 10.5.1: unexpected quitting
A few weeks ago after turning on my imac i realized every time that I opened a program the application quitted. Then after talking on the phone to tech support i had to archive and install and my computer would work again. It worked, but when i turne
-
Ipod mini won't play purchased music after not plugged in
iPod mini, Windows XP system (sorry). If iPod is plugged into the computer at least once every couple of days, everything's fine. But if the iPod is left unplugged for more than 3 days, it skips over all the purchased music. Copied music works fine.