Change instance number of J2EE instance

Hi Guru's,
I have to change the instance number of an ABAP+Java system. Is there a seperate procedure to change the system number of the J2EE instance?
Kind regards,
Mark

Hi
You can change the System No. in Java thru configtool. Make sure you also change the Port Nos using the System No. and InstanceProfileName<Sys No.>.
Also changes have to be made in the Instance.Properties file
Follow note for the correction :Note 831812 - Config Tool shows incorrect parameters after System Copy
Hope its clear
Shaji

Similar Messages

J2E License Key File With Changed System Number

Hello,
During the last weeks, there had been some trouble according to the sneak preview licensing web site to get a new license key for special SAP systems like J2E, NSP etc.
In the meantime, I used especially for my J2E instance via visual admin the button "install subsequent temp license" with success.
Returning anew to the web site today, I saw that now we are able again to renew the license key for our trial systems and ordered successfully license keys for J2E and NSP instance.
Because both systems have got new system numbers, I deleted the expired license key for NSP via saplicense -delete. Then I installed regularly the given new license key with success.
After starting the J2E instance, I tried to delete the existing active license (see above) via installed licenses getting a message which let me stop my try to delete the license because I feared for to get trouble with the system afterwards.
The exact text of the warning trying to delete the existing active license sounds:
DELETE J2EE-Engine_ADA License:
You are about to delete the license for the J2EE-Engine. This may lead to a shutdown of the running system. You will not be able to start the J2EE-Engine again without a valid license. Do you really want to proceed?
Trying to install the given license from file (via General), I got the informational message:
This system's system number is "xyz", but there is a license key for the system number "abc" in file path\J2E.txt. License key file path\J2E.txt doesn't contain any valid SAP license keys.
License key(s) not completely installed.
That was to be expected...
So my questions are:
1) What is to do when I want to implement the new given license key file which has another system number as the existing active one.
2) How often can I use the possibility to prolong my active license via button "Install subsequent temp. license" in future without falling in trouble?
Thank you for your answers.
Regards
Christian

Before deleting the J2EE engine license, check the "Installed Licenses" tab and verify that there is another J2EE-engine license with Validity "Valid" and within a satisfactory date range. Only under this situation will I feel comfortable with removing the additional/expired licenses.
Your original message is a bit confusing ... let me see if I got it correctly. You have been running your J2EE instance with temp licenses, because there was some issues w/ preview licensing on SAP's web site. Now that you have finally received your preview license, you wish to install it.
But since then, your system number has changed. Do you mean system ID? Since your example used a 3 character ('xyz' vs 'abc'). I think the SID is what you mean. Because changing system number will not require a new license, but changing the SID will.
So now you have the following.
1. J2EE running on temp license with SID 'xyz'
2. A new preview license for SID 'abc'
What you need to do is:
1. Request from SAP preview license for the SID that matches your system 'xyz'. OR, change the SID of your system from 'xyz' to 'abc', which is not recommended ...especially w/ AS-JAVA.
2. Install the new preview licenses.
3. Verify preview licenses are valid.
4. I don't believe you have to remove the temp licenses, it's overwritten when you install the permanent preview licenses.

Changing Instance Name - spfile

Hello guys,
i've got a little question about changing instance names and values.
For example i got the following spfile (only example values):
*.db_name=DB1
DA1.shared_pool=9000000
DA2.shared_pool=8000000
and so on...
So the db_name DB1 is valid for all instance identifiers.
But how can i specify manually with which instance name the oracle db server should start? (for exampe DA1 and DA2)
The standard spfile name can also not be used, because of oracle searches normally for $ORACLE_HOME/dbs/spfileSID.ora file?
And which value is preferred, if i have a value for all instances (*.shared_pool) and a value for the specfied instance (DA1.shared_pool)... which parameter is valid if both are specified in the spfile?
Thanks and regards
Stefan

hi,
Every Instance having there own spfile<sid>.ora.hmm that sounds very strange to me. Because of the option with the identifier in front of the parameter (*= for every instance, DA1 = only for instance with name DA1).
I read about the advantage only having one spfile for more instances (for exampe RAC).
So maybe there is a possibility, to start an instance with the specified name (in my example DA1 or DA2).
I don't want to change the DB name... only the instance name so that i can easily start the same db with different parameters (=different instance name)..
Thanks
Stefan

How to change INSTANCE profile parameter?

HI,
How to change INSTANCE PROFILE PARAMETER for permanent???
any step by step or note?
Thanks,

Alf,
Its is recommended to do parameter changes through RZ10. Check the parameter in RZ11 and if you see a check mark against DynamicallySwitchable, you dont have to reboot else it requires a reboot. All the changes you made through RZ10 is permanent. You can do it through OS level but its not a good practice. If you do it through RZ10 it is logged.
Thanks
Prince Jose

Is it possible to change instance and use OEM ?

We have 4 single DB instance in same oracle 11gr2 server on win2008R2.
We will not use grid control because of lack of time, knowledge and customer approval.
Is it possible to change instance and use OEM by changing ORACLE_UNQNAME variable or in any way ?

840105 wrote:
IF what EdStevens said is true,
WHat environmental variable ,or othe settings shoud I set to start 4 different dbconsole and access those OEM in same server ?
"IF" what I said is true???
The same environment variables you set to start the database itself .....
Here's the environment with no oracle-specific settings:
oracle:$ env | grep ORA | sort
PS1=\n\u:$ORACLE_SID$
Now we set the environment for database 'orcl'
oracle:$ . oraenv
ORACLE_SID = [oracle] ? orcl
The Oracle base for ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1 is /u01/app/oracle
Now the environment looks like this:
oracle:orcl$ env | grep ORA | sort
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
ORACLE_SID=orcl
PS1=\n\u:$ORACLE_SID$
Start the dbcontrol
oracle:orcl$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://vblnxsrv01.vbdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ........................... started.
If Oracle would only provide documentation ... oh, wait!
Getting Started with Database Administration
Managing Oracle Enterprise Manager Database Control

To find the number of j2ee Engines accessing the middleware system

How to find the number of j2EE Engines accessing the Middleware system.
Regards,
Haritha

Hi Haritha,
I 'm afraid that I don't have much idea to find it practically...somehow I managed.
look at system variable
sy-host.
check FM AS4_GET_PTF_STATUS_ALL
more details
check
Re: How can I find out my SAP instance number at runtime?

Is it possible to change the number of weeks to be displayed in the month view in calendar (mavericks)?

I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!

No.
There are up to six calendar weeks that might be used to display the 31 possible days in a month.
So the month view displays six weeks.

How do I change a number that was international back to UK number so it permanently recognises it as UK not international? I've tried delete, reset factory settings, change the format of the number etc and nothing seems to work. Help!

I recently moved back to the UK and bought my iphone 4 with me. It is unlocked and works on the new contract that I have set up here in the UK. The problem I'm having is that some of the UK numbers that I had already had on the iphone in Korea as international UK numbers will now not work as they are still coming up as international numbers. This means it is costing me a lot to message or call these numbers. I have tried changing the number format various ways, deleting the numbers (although it still seems to remember them), resetting the phone, restoring the phone.
How can I succesfully change these numbers?
Any UK numbers I have added since changing the contract are working fine.
Thanks!

Do you happen to have Dial Assist on? This is in Settings>Phone. This is what helps the phone identify international numbers when dialing, based on location. See if turning that off/on makes a difference. Unless you are making a number of international calls, I believe this can be left off. See the User Guide http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf Page 49 has info regarding Dial Assist.

My iPad has connect to the wrong number for imessage and facetime. How do I change the number on my iPad for imessage and faceting?

When setting up my new iPad and entering my own Apple ID my sisters number appeared on the imessage and facetiming; however her number is not associated with my Apple ID. How do I change the number to my own?

Turn iMessage and FaceTime off, reset the device by holding both buttons until the apple logo appear then let go and wait for it to restart. Then turn iMessage and FaceTime back on and enter the settings again

Changing customer number in alv top of page for every new customer

hi experts,
in alv grid display top-of- page, how to change customer number customer name for every new customer.
please help me.
Regards
Naveen.

You may look into this blog
http://help-abap.blogspot.com/2008/09/salv-model-5-add-header-top-of-page.html
This is has been contributed by one of the SCN contributor Naimesh Patel.
a®

How can I change the number of pages in a spread?

I imported a document that our PR department used to create in Quark into InDesign 5.5. They have it set up in four-page spreads. However, the document has always been printed with a coil binding with a large graphic on each left-hand page and text on the right page. I would like to convert to using two-page spreads. However, none of the places the InDesign help leads me give any indication of changing the number of pages per spread.
My problem may be related to having imported from Quark, but if there's an easy way to change this, I'd appreciate hearing about it. Thanks!
-Brian

In the pages panel select the spreads then right-click and check Allow Selected Spreads to Shuffle and also Allow Documrnt pages to shuffle. If asked if you want to maintain the current page arrangement say no.

How do I change my number for iMessage and facetime

How do I change my number for iMessage and FaceTime on my iPad mini

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

How do I change the number of significant digits in a slide's digital display?

I suspect I'm missing something really obvious. I want the slide's digital display to show 1.23 instead of 1.23456. Here's what I tried:
1. Drop a Horizontal Pointer Slide
2. Make its Digital Display visible
3. Type 1.23456 into that display
4. Pop up on the Digital Display and select "Display Format..."
5. Change the number of significant digits to 3 and hit "OK"
The digital display still shows 1.23456. What am I missing?
Solved!
Go to Solution.

LOL - I had the same problem. Hidden in plain sight! All I saw was Numeric, and thought "Duh! Of course it's numeric - it's a slider!"
I do think NI could do a much better job on this, perhaps with more informative labelling. Slider Scaling or Scale Format might be better. Also, since one can select the Digital Display by itself on the front panel, one should be taken directly to the digital display formatting when Properties is selected, instead of still having to change the dropdown. By selecting the digital display instaead of the slider, you're implying that you want to change its format only.

How do I change the number of plot areas in a Mixed Signal Graph

How do I *programatically* change the number of plot areas in a Mixed Signal Graph? I recognize that the developer can choose to add or remove a plot area during edit mode but I want to select between 2 or 3 visible plot areas and scale the plot areas appropriately. Is there a property that tells me how many plot areas (or yscales) there are? I also need a property that I can write to as to set the number of plot areas available.
Aside from manually making too many plot areas and then hiding the unneeded plot areas how can I do this?
Jonathan

Hello,
I don't think that is possible - I searched the property and invoke nodes but didn't find something to do that. This would make a great product suggestion though, which you can submit (it goes directly to R&D) by clicking the word feedback in the bottom left corner of the Contact NI page linked below:
Contact NI:
http://sine.ni.com/apps/utf8/nicc.call_me
Best Regards,
JLS

How do I change the number of picture columns in a folder

how do I change the number of picture columns in a folder

Never mind. I found the answer. For those who may wonder: you slide the cursor on the bottom right. I looked in IPhoto help but there was nothing there.

How can I change a number on my account?

how can I change a number on my account?

Log into your on-line MyVerizon account. Click on the blue More Actions under I Want To. Under Profile, click on Change Mobile Number and follow the prompts.

Change instance number of J2EE instance

Similar Messages

Maybe you are looking for