Change IP Address ACS 4.2 Appliance

Hello,I
have an ACS 4.2 Appliance integrated with AD and CA in Windows 2K3 both
of then working OK and Remote Agent, but we want to change the IP
Address of the ACS 4.2 Appliance, What is the procedure to do this?
have i install the certified again? i know that certified depend of
hostname and ip address.Thank YouÁlvaro
Hi Alvaro,
Best take the serial console of the ACS Appliance and type set ip and follow the procedure to change the ip address
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/solution_engine/admap.html
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

Similar Messages

Unable to register a secondary ACS 5.2 appliance

Hello,
I have installed 2 ACS 5.2 appliances, the two appear as Primary. When I try to register one of them with the other one using "System Administrator -> Local Operation -> Deployment Operations" I get the following message:
This System Failure occurred: Unable to authenticate with node.. Your changes have not been saved.Click OK to return to the list page.
I have tried with both "ACSAdmin" and "admin" users with their respective passwords.
Am I doing anything wrong?
Is there any LOG I can check to troubleshoot this?
Thanks a lot!!!
Regards,
Julio

I finally found the problem. I was using admin user (super user priviledges). I created another user with all permissions and it worked.
Thanks a lot.

Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him mine. Want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address.

Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!

Hey Fagen!
You will want to see the following article for guidance on achieving the result you wish to achieve:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
Cheers,
Braden

AddressBook - Is there a way to change multiple addresses at the same time?

To be clear....I have 25 contacts at 1 company and that company moved.
Is there a way to link the cards together so that when I change the address on one card it automatically updates the other 24 cards?? Rather than having to change each contact individually, which is time consuming and annoying.
I have created a "Smart Group" for the company and all of the contacts place themselves in the group but it still won't sync the addresses.
Can someone tell me how to do this, if it's even possible? And if it's not, I really wish it was!!
Thanks!

Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

Is there a way to change the addresses used in an existing iMessage thread?

This is kind of a multi-part question. Let me describe my scenario.
I have many iMessage threads with other iPhone users where the "reply" addresses for one or both ends are the phone *numbers* instead of AppleID email addresses. (This could be due to a number of factors... either they had their "Start new conversations from" address set to their phone number, and/or they started a new conversation with me sending it to my phone number. How it *got* that way doesn't really matter). I want to be able to change the addresses of the conversation to AppleID's (so that I'll still get messages when I change SIM cards, among other reasons).
With iOS 8's new ability to add/remove people from conversations, I thought I would be able to add the AppleID address and remove the phone number address, but there are two problems with that: 1) iOS 8 seems to only allow this for conversations which began as multi-person conversations, and 2) it doesn't seem to want to let you add addresses for people who are already recipients via another address (in other words, if Alice is already on the conversation via her phone number, I can't add her AppleID to the conversation). I guess I could remove the person first, and then re-add them with the other address... but I'd feel safer if I could add the next one before removing the first one.
I know I could just tell the other person to delete our thread and start a new one, but I don't want to lose all of our dialogue and pictures (and I don't want to have to manually save it).
So, the questions:
Is there a way to change the address my counterparty is sending to when they make further replies to our conversation?
Is there a way to change the address I send to when I make further replies to the conversation?
Is there a way to change the default address to use when trying to send someone an iMessage? (What I'm after here is a way to craft my "contact" entry in people's phones so that, when they try to send a message to me and start typing my name, my preferred address comes up on top).
As it looks like the only way to do this might be to use iOS 8's method of adding/removing recipients, is there a way of converting a two-person conversation into a multi-person one?

I think I may have solved it, actually. I find that if I switch the timecode to NDF in the source viewer, it seems to work. I have tried it on three clips and they have sync'd without problems. Hopefully this will continue to be the case.

How can I change email address RIM sends mail to?

I have two emails, one that's strictly friends and family, and one for everything else. A while back I changed the "everything else" address to gmail. Although I've never submitted my personal address to RIM (other than setting up that email on my phone), they've begun spamming my personal mail with daily "notifications." I don't mind getting the mail, but 1. I don't want it coming to my personal address, and 2. I find it very disturbing that RIM harvested my personal account info to use at their convenience. I see in the emails I receive I can "unsubscribe," although they'll still send me mail they deem important. I don't want that, I want to give them my new everything address, so they'll stay out of my personal acct. I have thoroughly searched their site, but see no way to submit this new address, or to set up my acct preferences for my interaction with RIM. Please tell me how to change my address with RIM, or to at least contact them, not about my phone, but about their service (there doesn't appear to be any such option among the "Contact Us" selections they offer). Thanks very much!

Notifications of what?
I promise you, from all I've seen, you would have had to check a box in something stating you want to receive updates, etc., from BlackBerry. They certainly haven't "harvested" your email address from simply being loaded to your BlackBerry.
You need to unsuscribe from the current emails you're getting. Even if you don't want to.
You probably downloaded an OS or file update or Desktop Software somewhere that you clicked to agree to receive updates.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't change MAC address of my wireless card on Windows XP

Dear Forum Members,
I have recently bought a notebook, Lenovo IdeaPad G550L (I haven't found section for the G series here on the forum) and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly changed MAC address. I installed the recommended driver, available from Lenovo's website, version 5.10.38.14. I tried the common way to change the MAC address, went to Control Panel -> Network Interfaces -> Broadcom Wireless Network Adapter -> Configure... -> Advanced -> Locally administered MAC address, and changed it to a different address (without ":" or any separator characters). Unfortunately this common solution won't work at all. Although, no error messages are produced when changing it (so it seems successful) my wireless router shows me the original MAC address of my integrated wifi card. Tried to restart my computer, my router, everything.
* Tried different drivers, downloaded a driver from HP which had a separate wireless configurator, Broadcom Wireless Utility. It worked like the driver from Lenovo (except this one hasn't got the utility), but I was still unable to change my MAC address.
* Tried a different driver from SoftPedia, version 5.10.79.14 (this is newer than Lenovo's), it didn't work either.
* Tried Nathan True's MACShift utility. It seemed to change the MAC address, but my router showed the original, so it didn't.
* Tried to look for official Broadcom drivers on www.broadcom.com but found nothing for BCM4310.
* Finally, I booted my alternative OS, the latest Ubuntu Linux, and used the kernel driver b43 for my wireless adapter. I tried to change my MAC address using the command ifconfig wlan0 hw ether .... and connected to my network. It worked, my router showed the changed MAC so the hardware (or the firmware) is capable of doing this by the right driver/firmware.
I tried to address Broadcom with the issue, sent them a letter like this post they replied that they are not competent, they wrote the following (I guess this was an automatically generated message because it got back in 10 seconds ) from [email protected]:
"As the chipset supplier, Broadcom provides driver support to our customers - the manufacturers of wireless devices - that ultimately provide products to end customers, such as wireless LAN vendors, cable modem vendors, and notebook providers. It is up to these manufacturers to provide product-specific drivers and software support to their end customers. Please contact the manufacturer of your wireless device for their current drivers"
Then I addressed Lenovo with the problem, their answer:
"Dear ******,
Thank you for contacting Lenovo, the makers of ThinkPad and ThinkCentre products. As I understand, you have purchased a Lenovo IdeaPad G550L and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly change MAC address.and you would like to know is there an official driver for Windows XP that allows you this basic feature like b43 in Linux. We apologize,Please do speak with our Idea pad technical Team at 877-453-6686 Option 1-2-1-2 for further assistance.
If you have further questions or concerns, please feel free to contact us at 866-42-THINK (84465) option number 2. We will be happy to assist at that time.
Once again, thank you for contacting Lenovo.
Sincerely,
Lenovo Websales/CustServe"
So this means I should call them and spend extra money for phone bill of international calls because of their fault of providing a basic feature that is to be expected from every single wireless card in the market. Should I believe that a guide over the phone is more efficient than a step-by-step solution or a link to an alternative driver? I'm getting kind of disappointed. At least they have understood (or copy-pasted) my problem, dutch comfort though.
Any ideas? Anyone experienced the same problem and solved it? Is there an official (or even unofficial) driver for this device for Windows XP that allows me this basic feature (like b43 in Linux)?
Thanks in advance,
str4ngS

Yes, I have posted this thread to different forums after I realized that Lenovo "customer care" is not likely to help me out and even wirelessforums.org members couldn't come up with any ideas for days, that's why. I have already written that helper applications like SMAC (or etherchange or macshift) don't work, because they do the same thing in the system as I change it in the driver panel, so they use the same method which simply does not work.
Locked? Definitely not. If yes, why can I change the MAC of my adapter under Ubuntu Linux using b43 open-source driver if it's really locked? Or you mean it's locked from software, because Lenovo or Broadcom didn't want their users to change their MACs or they just forgot to release a fully-functional driver? Well, then I would like to have a driver in which it's not locked, because this is a basic feature of my adapter of which the hardware is capable.
I have already contacted Broadcom, see their (automatically-generated) answer in my initial post, but I will try to do that again with more foresight.

How to change email address in my jdc profile

I want to change email address in my profile. Can anyone tell me how to do it?

http://forum.java.sun.com/thread.jsp?forum=31&thread=299784

HI, i bought my i touch 4th gen from the philippines, and i transferred here in the US. i would like to purchase an application here in the US but i wont allow me to. and i have been trying to change my address and country but it wont let me too.

HI, i bought my i touch 4th gen from the philippines, and i transferred here in the US. i would like to purchase an application here in the US but i wont allow me to. and i have been trying to change my address and country but it wont let me too.

What happens when you change your address in your iTunes account? You also have to have a payment method associated with the USA, For example gift cards are restricted to the country of their purchase.

To change shipping address in sales order

Hi experts,
I have an issue here. I tried to change shipping address in an existing sale order. However, even tough I have changed and updated the shipping address in Business partner Master data. and the sale order itself, SAP still prints the old address for the shipping.
It is possible to change? or it is one of the control by SAP?
Thanks in advance!
Phil

Hi Phil,
Is this Sales Order generated through Quote?
Thanks,
Gordon

I got a new e-mail address and I reset my iPod so it already has the new email address. I can't seem to change the address on my iPad or iPhone. Please help me change the address on all my devices!

I got a new email address and I reset the iPod so it already has the new address. I can't seem to change the address on my iPhone5 or iPad. So please help! How do I change the address for my apple ID and icloud on all my devices? I don't want to reset my iPad and phone just to set new email address I can't do updates without the password and I have forgotten my password for my old email address. Please Help! Getting frustarted!

If the old ID ("email address") is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How do i change an address on a pdf file?

How do i change an address on a pdf file?

Using Acrobat XI Pro you could use the Edit Text & Images tool to perform minor touchups such as an address.
Performing minor touchups with this tool is fairly easy.
Be well...

Can anyone help me, I need to change the address (country) from US to UK so i can purchase?

can anyone help me, I need to change the address (country) from US to UK so i can purchase?

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

How to deal with the change in address of plant,

how to deal with the change in address of plant,companycode,sales org etc.?

Hi,
Do you want to change the address of Company code, Plant and Sales org?
Follow the menu path in SPRO.
SPRO >> Enterprise structure >> Definition >> Financial accounting >> Define Company code >> Edit company code >> Click on address and change.
.. Definition >> Sales and Distribution >> Define ...sales org >> select the sales org and click on address and change.
... Definition >> Logistics - general >> Plant >>>> Click on address and change.
Regards,
K Bharathi

Change IP Address ACS 4.2 Appliance

Similar Messages

Maybe you are looking for