Change job attribute

Hi all experts,
I have a job name   TRACKING_ARCHIVE and it runs daily at 12.00 am in Oracle scheduler.  It uses schedule named DAILY_PURGE_SCHEDULE. I want to change  daily execution time from 12.00 am  to 5.00 PM. Could any one tell me how i can do it with set attribute command of Oracle job scheduler? I will appreciate your help. Thanks. We are in windows 2008  and DB version is 11.2.0.3 in 2 instance rac.

Hi,
Do you need to change the DAILY_PURGE_SCHEDULE schedule or the job's schedule? If you don't want to affect DAILY_PURGE_SCHEDULE, then do the following:
BEGIN
     DBMS_SCHEDULER.SET_ATTRIBUTE_NULL(name => 'TRACKING_ARCHIVE', attribute => 'schedule_name');
     DBMS_SCHEDULER.SET_ATTRIBUTE(name => 'TRACKING_ARCHIVE', attribute => 'repeat_interval', value => 'freq=daily;byhour=17;byminute=0;bysecond=0');
END;

Similar Messages

  • Hi regarding the change of attribute 'forward_wi' to 'X'

    hi
    Any one please tell me how to set the 'forward_wi' attribute to 'X' when it is set as ' ' ,when i run the mail send program RSWUWFMLEC. Is there any Function module to change the attribute.

    Hi Saisri,
    Welcome.
    your question is not clear.even though i am providing some solution. i hopwe it may help u. if not reply me.
    FORWARD_WI
    Flag: Forward work item
    Example value: X
    Indicator: Specifies whether work items are to be forwarded as e-mails.
    RSWUWFMLEC selects work items and creates emails based on those work items.
    The emails are sent to the mail server by RSCONN01.
    If you are not getting any emails then either:
    Your variant/parameters for RSWUWFMLEC are incorrect
    Your user attribute settings are incorrect - i.e. there is no-one found
    with
    the attribute FORWARD_WI = 'X' and a valid EBP email address
    There have been no new work items in READY status created since the last
    job run
    You have no sender email address for the userid that executes RSWUWFMLEC
    RSCONN01 hasn't run since the last run of RSWUWFMLEC - I assume you've
    eliminated this issue.
    Running RSWUWFMLEC with the option Log = All will clarify if any of the
    other conditions are stopping you from getting the mails.
    If the mails are being created then you will see them in transaction SOST
    along with any messages if the send to mail server has failed, e.g. if the
    email addresses used are incorrect.
    If you want to set a common pattern to the email address for everyone then
    use transaction SO16.
    thanks
    karthik

  • How to change the attribute name for a relation

    When the Data Modeler engineers a logical model into a relational model it create table columns for the relations. The names of the generated columns are listed in the attributes list in the properties dialog of the relation. The actual name of the attribute gets calculated by the attribute name of the entity which is part of the relation. This is okay, if there is only one relation between two entities. But when there are two relations between two entities the second attribute gets a stupid number suffix. This makes it impossible to give the attribute a useful semantic meaning.
    When I engineer the model into a relational model I can change the column name in the relational model. Changing the column name in the relational model is not perfect but it would be okay for me, if it would not be overwritten during the next engineering run.
    So I have two questions:
    How can I change the attribute name in the attributes section of the properties dialog of a relation? See here for screen shot:
    http://public.ceving.de/2012050300/relationattribute.png
    And if it is not possible:
    How can I preserve any changes on column names in the relational model during a re-engineering run?
    Edited by: 931739 on 03.05.2012 08:07

    Hi,
    I've logged an Enhancement request on this.
    I don't believe it's possible to change it from the Entity or Relationship dialog, as it's not updatable in these dialogs.
    What you can do is change it in the Relational Model, and then reverse engineer the change back to the Logical Model.
    David

  • I changed jobs and purchased a new iPhone I  no longer have any of my iBook information. My Apple account and name has changed is there any way to get the info I had in iBooks to my new phone under my new account?

    I changed jobs and bought a new phone. I would like to get my iBooks info on my new phone but it is under my old account. When I try to log in under the old account i get a message that I will not be able to log back onto my new account for a period of time. HOw do i get the information from my old account over to my new account?

    You can't currently transfer purchases/downloads from one account to another account.
    When you download past purchases from an account then you will potentially tie the device (or computer if you do it on that) to that account for 90 days : http://support.apple.com/kb/HT4627
    Have you got the ibooks already on your computer and/or on a backup so that you can sync them to your new iPhone ? If not then have you bought anything on your new account yet - could you go back to just using the old account ?

  • I recently changed jobs and no longer have access to the computer that contained my Firefox bookmarks. I don't have a Firefox profile. Is there any way to find and transfer my bookmarks to my new computer?

    I recently changed jobs and no longer have access to the computer that contained my Firefox bookmarks. I don't have a Firefox profile. Is there any way to find and transfer my bookmarks to my new computer?

    If you don't have access to the old computer any longer, '''no'''. Unless you were using something like the Google Toolbar & Google Bookmarks or Xmarks, which would have your bookmarks in an online account that you could access. Firefox doesn't include an online storage feature for personal data, yet. That is coming in a future version.
    If you have a friend at your old job maybe they have access to that old PC and they could export your bookmarks to a file and email that file to you.

  • How to change report attributes like heading, sort etc programmatically

    Some of the columns from a classic reports using pl/sql as region source should be sortable. Is it possible to change this attribute (sort = yes) using JavaScript or APEX API?
    David
    Edited by: david on Sep 6, 2011 11:56 PM

    There is something I don't understand here. Why do you need to point at the sxd? What is changing? Like I mentioned before. If the contents of the xsd change, all the report will do is - at best - drop the changed fields so you will be missing data. Perhaps some of the following will help;
    [Crystal Reports Guide To ADO.NET|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/401c4455-a31d-2b10-ae96-fa57af5aec20?quicklink=index&overridelayout=true]
    [Crystal Reports For Visual Studio .NET Reporting Off ADO.NET Datasets|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/2091d0c3-da1d-2b10-22be-a3426b183f75?quicklink=index&overridelayout=true]
    [Crystal Reports For Visual Studio 2005 Walkthroughs|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23?quicklink=index&overridelayout=true] (page 332 on).
    Ludek

  • How to change the attribut of Form in Review Form in ISR

    Hi,
    We have to change the attributes of text fields of form ( e.g disabling the text field ) once user hits the Review Form button on MSS page
    Please let me know how to do it .
    Thanks
    Manish

    Hi Manish,
    You may write the Formcalc scripting for the respective field.
    //Check ISR control parameters for read/write access
    if($record.CONTROL_PARAM.ISR_MODE == "DISPLAY" |
       $record.CONTROL_PARAM.ISR_FORM_VIEW =="ISR_APPROVE" | <b>$record.CONTROL_PARAM.ISR_REVIEW == "true" )</b>
    then
         this.access = "readOnly"
    else
         this.access = ""
    endif
    Hope this helps.
    Thanks and Regards,
    Anto.

  • How to change the attributes of GUI CONTROLS in my own program.

    hi all,
    i just want to change the attributes of GUI CONTROLS in my own program.
    for example `
    How to set an ICON on my GUI BUTTON in the program?
    so what's the mapping between CONTROL in the SCREEN PAINTER and variable in the program?

    Hi Chao Liu,
    Ya , u first find out the PF-STATUS of the screen and goto that status and now u can modify the ICON u want .
    Finding the GUI status of the screen
    Goto that  TRANSACTION CODE or SCREEN
    On the Standard Menu bar Goto ( Menu path) System --> Status
    Now u get a pop-up System :status in that in SAP Data block u can find GUI Status. Now Double Click on that Status. It takes u to the Status of that screen.
    Now click on the Display --> Change Button on the application tool bar.
    If it is a standard GUI-status then it asks for the ACCESS KEY.
    if it is a custom defined GUI Status  then u can change the status .
    reward if helpful
    raam

  • How to change the  attribute of screen field to drop down list dynamically

    Hi All,
      Col X                   Col Y
      A                        input field
      B                       drop down list
    This is a tabular disply where the Screen field attribute for Col y  is NO DROP DOWN BOX.
    My requirement is to change the attribute of COl Y to DROP DOWN list depending on the value of
      COL X  dynamically.

    Dear Ajay,
    Actually this requirement is to enhance the standard screen for Tcode :EHSVU21.
    So depending on the 1st Column(Test no)  value ,i have to change the 3rd Column(Low.norm.result)
    property either to DROP Down or not.
    So in the PBO only the changes to be made and there is no field in SCREEN internal table for changing the attribute to DROP down. I checked SCREEN internal table where the field VALUE_HELP and REQUEST is useful but not  suitable for my case.
    Any solution available?

  • .change IUCONFIG attribute value in an event-handler of IUICCON (move in)

    Hi there,
    I have been searching for over a week now both on SDN and using the debugger, hopefully this brings more luck.
    On the web-client there is this new contracts page with 3 tabs.
    On the first tab you can choose a product, select a contract and then click Configuration.
    There you can change parameters. (this is View IUCONFIG/ConfigTree) with contextnode ISUORDERITEMCONFIG.
    In this case it is not wanted that this configuration page needs to be opened.
    So I need to change the value of 1 of these attributes (always the same attribute) automatically when switching to the 2nd tab, or when clicking the save button on the last tab. Or any event on the 2nd or 3rd tab are okay. As long as they are sure to be executed in the process.
    I would prefer changing the attribute from within IUICCON/ProcessSaveButtonBar>EH_ONBT_SAVE_PROCESS
    or IUICCON/ProcessBar>EH_ONNAVTOACCOUNTDATA
    I just don't have a clue how to automatically set one value of these configuration attributes.
    Can anybody provide a solution or a workaround?
    Is there any way to change the parameters without ever going to the configuration page in the browser?
    Thanks in advance for your ideas
    Could this thread be moved to CRM webclient?

    Solved, the solution can be supplied in trade for the right amount of money
    (okay is was CRM_ISU_CONT_CHANGE_OW)

  • I changed jobs and had to change emails/Apple ID.  Before doing so, I did not save my photos from the photo stream to the camera roll.  Now, all the old pictures that are still on my iPhone are not streaming to the iPad, only new ones.  Please help.

    I changed jobs and had to change email/AppleID.  Before doing so, I did not copy the pics on the photo stream of my iPad to the album and now the only pics being synce with my iPad are new pics either saved or taken on phone.  Old pics are still on phone.  There has to be a way to get these pics to be able to stream them on to iPad, right?

    You have a couple of options to get them in your photo stream:
    Open the photos one at a time and take a screenshot.  This will add a new low resolution copy of the photo to the camera roll, which will then upload to your photo stream;
    Email the photos a few at a time to yourself, then save the attached photos to your camera roll.  This will add a copy of the photo at full resolution to your camera roll and upload to photo stream;
    Use an app like PhotoSync, which will allow you to wirelessly transfer copies of all your old photos to your computer all at once.  Then delete these photos from your camera roll and use PhotoSync to transfer them back from your computer to your camera roll.  These will be the original resolution and will upload to your photo stream.  (You need an app like this because iTunes will not transfer photos back to your camera roll, where they must be in order to add to your photo stream.)
    Or, you can add them to a shared stream and invite yourself as a subscriber (see http://help.apple.com/icloud/#/mmc0cd7e99).  The shared stream will appear on your iPad and you can either leave things this way, or save them to the camera roll on your iPad and delete the shared stream.  They won't be in your photo stream but they will at least be on your iPad.

  • How to change the attributes of screen fields dynamically

    <b></b>
    well i have created a table by name empmaster_data with following fields.
    *emp_id.
    *emp_fname.
    *emp_lname
    *dob.
    *doj.
    *dept.
    *desig.
    now using a single screen i want to create,change and display the information.even i am using save and exit button.
    now i want to change the attributes of screen fields dynamically like active,input,output,invisible.

    Hi,
    Have Different Radio Buttons for the purposes what you have and use AT Selection Screen Output, Under the event Use loop at screen and with continue with your requirement.
    Hope This Info Helps YOU.
    <i>Reward Points If It Helps YOU.</i>
    Regards,
    Raghav

  • How do I change text attributes within one text box in Motion 3?

    I am trying to change text attributes within one text box in Motion 3, but am only able to change the font/size for the entire box. Is there a way to change the attributes to individual lines of text within a text box without creating an entirely new one or using the "Lower Third" text effect?
    How do I create (two different) multiple colors, fonts, bold, italic, underline in one text box within Final Cut Studio Motion (FCP, FCS)

    Thank you! You saved me hours of tinkering around with multiple text boxes. It seemed like it should be something pretty elementary. It didn't help that I am not familiar with proper terminology, so thank you for defining glyph.
    Cheers,
    Owfownugi

  • How to change general attribute of text element

    hi
    who now how to change general attribute of text element on screen dinamically? I wish to change text value dinamically for example.

    Hi Denis,
    I am not too sure on what you want.
    If you require that the text value be different based on some conditions you can declare as many text elements as conditions and call the relevant text element.
    But I dont think that you can assign dynamic texts to a single text element.
    Regards,
    Saurabh

  • Changing visual attribute in Enter Query mode

    Hello, I want to change visual attribute of all items in the first record when the user presses button for Enter_Query. I want that the user sees that the form is in enter query mode and it "waits" for the input of criteria. My code (copied from Help and modified) in trigger WHEN_BUTTON_PRESSED:
    DECLARE
    cur_itm VARCHAR2(80);
    cur_block VARCHAR2(80);
    BEGIN
    ENTER_QUERY;
    cur_block := :System.Cursor_Block;
    cur_itm := Get_Block_Property( cur_block, FIRST_ITEM );
    WHILE ( cur_itm IS NOT NULL ) LOOP
    cur_itm := cur_block||'.'||cur_itm;
    Set_Item_Instance_Property( cur_itm, CURRENT_RECORD, VISUAL_ATTRIBUTE,'yellow');
    cur_itm := Get_Item_Property( cur_itm, NEXTITEM );
    END LOOP;
    END;
    where yellow is the name of my visual attribute.
    The problem is that I need to press the button TWICE to color the record.
    Can anybody help me with this problem?
    Natasa

    (Wrong forum).
    The problem is that enter_query stops executing your procedure until
    another action ist started by the user.
    You must create a short-time timer before issuing enter_query and set
    your colour scheme in the when-timer-expired-trigger.

Maybe you are looking for