Change logo in BW report
Hi All,
I need to change the logo for all BW reports. Can you please tell me the steps involved. Your quick response will be appreciated.
Thanks in advance,
Sananda
Hi,
Are you already using the standard web template ? if so try to make changes to the existing template.
If you want to create a template with your company logo follow the below steps
Step 1: Create a Workbook template
1.1: Launch BEx, Enable Macros if prompted.
1.2: BEx Tool Bar, Create a New Workbook
1.3: Insert-> Picture->From File (For logo)
1.4: Enter the details you want next to the logo;Like company name etc.,
1.5: Tools->Options->View. Remove Checkbox for gridlines
1.6: Highlight a Row below your logo. For example Row 8. Borders Icon - Thick
1.7: Click on one of the cell to make it active. Say A10.
1.8: Save this workbook in a role or favourites
Step 2: Set a default workbook template
2.1: BEx toolbar ->settings->Permanent Workbook template
2.2: Select your saved workbook and say OK
2.3: BEx toolbar ->Settings->New Workbook on Embed->
Based on Perm.Template
Step 3: Open the new Query and check. You will see the template you created as a header for all your queries.
Note: Data will be displayed from the active row which you selected while saving the workbook.
Similar Messages
-
Hi All,
I have created a BW report through query designer. I guess it takes the default template when executed through web portal. There is a logo available in the report when run through web portal and I wish to change it to some other logo. Where do I need to make the change and how. Please advice.
Thanks in advance,
SanandaHi Sananda,
You can change LOGO in WAD,
Go to transaction SE80 (Object Navigator).
Click on <MIME Repository> Button
Locate the folder "SAP > BW > Customer > Images"
Right click on Images folder to use the context menu "Import Mime Objects" and then import your Image.
Please note that there is a restriction on the type of image you can use. You can use BMP, JPG and some other format only.
Once imported, you will find these images in your WAD Insert Image list.
Regards,
Marasa. -
How to put header and how to insert logo in this report
HI
I want a header and logo in this report.how to do this in ALV report.Also why we have to put the sy-repid.Plz tell me in this report where i have to do all this.Plz show me in detail.
REPORT ZREPORT_ALV .
TYPE-POOLS : slis.
tables:vbak,vbap.
*DATA: report_id LIKE sy-repid.
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV.
data: ivariant(1) type c,
itvariant like disvariant,
w_variant like disvariant.
initialization.
*REPORT_ID = SY-REPID.
PERFORM F1000_LAYOUT_INIT. "using I_LAYOUT.
ivariant = 'A'.
itvariant = w_variant.
select-options:so_vbeln for vbap-vbeln.
data:itab like vbak occurs 0 with header line.
data:itab1 like vbap occurs 0 with header line.
start-of-selection.
select * from vbak into table itab where vbeln in so_vbeln.
if not itab[] is initial.
select * from vbap into table itab1
for all entries in itab
where vbeln = itab-vbeln.
endif.
data:ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat1 TYPE slis_t_fieldcat_alv.
****For alv display
IF NOT itab1[] IS INITIAL.
DEFINE ls_fieldcat.
add 1 to ls_fieldcat-col_pos.
ls_fieldcat-fieldname = &1.
ls_fieldcat-outputlen = &2.
ls_fieldcat-seltext_l = &3.
ls_fieldcat-emphasize = &4.
append ls_fieldcat to lt_fieldcat1.
clear ls_fieldcat.
END-OF-DEFINITION.
ls_fieldcat 'VBELN' '10' 'Sales Order Number'.
ls_fieldcat 'POSNR' '6' 'SO Item'.
ls_fieldcat 'MATNR' '13' 'Material No'.
m_fieldcat1 'NETWR' '13' 'Amount'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = 'wf_report'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = lt_fieldcat1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = ITVARIANT
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = itab1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
I_SAVE = ivariant
CHANGING
CS_VARIANT = itvariant
EXCEPTIONS
WRONG_INPUT = 1
NOT_FOUND = 2
PROGRAM_ERROR = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM F1000_LAYOUT_INIT. "USING I_LAYOUT TYPE SLIS_LAYOUT_ALV.
*CLEAR I_LAYOUT.
i_layout-colwidth_optimize = 'X'.
I_LAYOUT-key_hotspot = u2018Xu2019.
I_LAYOUT-hotspot_fieldname = MATNR.
ENDFORM.hi,,,,
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = sy-repid >>>>>>>>>>>>> your report name.
regarding logo and header,,,,
first store the logo in T-code OAOR, then call that in your report.......
data: heading TYPE slis_t_listheader,
wa_header TYPE slis_listheader,
events TYPE slis_t_event.
* To display TOP_OF_PAGE.
FORM top_of_page.
DATA : text(40),txtdt(40).
CLEAR l_string.
l_string = 'JCB India Limited'(hd2).
wa_header-typ = 'H'.
wa_header-info = l_string.
APPEND wa_header TO heading. " index 1.
CLEAR l_string.
WRITE :'Number of records:' TO text,dbcnt TO text+20 LEFT-JUSTIFIED.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO heading.
CLEAR l_string.
wa_header-typ = 'S'.
WRITE : 'Report Run Date :' TO txtdt,sy-datum TO txtdt+20 DD/MM/YY.
WRITE sy-datum TO dat DD/MM/YY.
wa_header-info = txtdt.
APPEND wa_header TO heading.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'ENJOYSAP_LOGO'
it_list_commentary = heading.
CLEAR heading.
ENDFORM. "top_of_page
to execute top-of-page you have to create events.
for ex......
FORM create_event USING p_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = p_events.
READ TABLE p_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE formname_top_of_page TO ls_event-form.
APPEND ls_event TO p_events.
ENDIF.
ENDFORM. " create_event -
Print LOGO in classical report printout
Hi GURUS,
Is it possible to take print of logo in classical report.refer this link:[click|http://tinyurl.com/5s22vp]
the code is copied from that link.
Make the changes in the code as given below.
REPORT zgb_prog06.
* START OF DO NOT CHANGE***********************************
DATA: docking TYPE REF TO cl_gui_docking_container,
picture_control_1 TYPE REF TO cl_gui_picture,
url(256) TYPE c .
DATA: query_table LIKE w3query OCCURS 1 WITH HEADER LINE,
html_table LIKE w3html OCCURS 1,
return_code LIKE w3param-ret_code,
content_type LIKE w3param-cont_type,
content_length LIKE w3param-cont_len,
pic_data LIKE w3mime OCCURS 0,
pic_size TYPE i.
* END OF DO NOT CHANGE*************************************
DATA : sum(4) , num1(4) , num2(4).
PARAMETERS: p_dummy(4) DEFAULT '4' .
PARAMETERS: p_dummy1(4) DEFAULT '5' .
AT SELECTION-SCREEN OUTPUT. "Remove this event
START-OF-SELECTION.
write 'Testing picture printing in classic report'.
PERFORM show_pic. "Add it here
end-of-selection.
*& Form show_pic
FORM show_pic.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>DISPLAY_MODE_FIT.
CALL METHOD picture_control_1->set_position "change positions
EXPORTING
height = 70
left = 800
top = 20
width = 190.
*CHANGE POSITION AND SIZE ABOVE***************************
IF url IS INITIAL.
REFRESH query_table.
query_table-name = '_OBJECT_ID'.
*CHANGE IMAGE NAME BELOW UPLOADED IN SWO0******************
query_table-value = 'ZLOGO'.
APPEND query_table.
CALL FUNCTION 'WWW_GET_MIME_OBJECT'
TABLES
query_string = query_table
html = html_table
mime = pic_data
CHANGING
return_code = return_code
content_type = content_type
content_length = content_length
EXCEPTIONS
object_not_found = 1
parameter_not_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
* WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'image'
subtype = cndp_sap_tab_unknown
size = pic_size
lifetime = cndp_lifetime_transaction
TABLES
data = pic_data
CHANGING
url = url
EXCEPTIONS
OTHERS = 1.
ENDIF.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = url.
*Syntax for URL
*url = 'file://D:\corp-gbanerji\pickut\cartoon_184.gif'.
*url = 'http://l.yimg.com/a/i/ww/beta/y3.gif'.
ENDFORM. "show_pic -
How to add company logo in z report
Hi !
i want to know how to add company logo into custom report ...
generally we used below mentioned code for sap logo
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LIST[]
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "top_of_page"
what changes we need to do to add company logo into custom report
Please guide
Regards
SheetalFirst upload ur required logo in SAp by t-code SE78.
Use teh above mentioned ALV code for the same.
Try to search on SDN for the u can find the full ALV code for the same.
..lakhan -
Change Number in aut10 report.
Dear All,
what is Change number in Aut10 Report and in which manner we can use it?? iam taking it through Tcode wise.
Regards
Anupam jainYou have to change the Default Workbook template in the Global Settings of BEx Analyzer. You might have to do this directly in production environment.
Open up a query in BEx Analyzer. Change the logo or add the logo and any information you want to default in all reports. Save as a workbook and then click on global settings to set that workbook as a default.
The below link gives you detailed step by step method to create default templates.
http://sap.seo-gym.com/bex.pdf
Good Luck.
MP. -
Hi,
How To add Logo in ALV Report?
I need step by step explanation.Hi uday,
go through this hope u can understand.
*&amp; Report Z_OOALV_LOGO
*&--Sample Program using ooalv-> by SrikanthV--
REPORT z_ooalv_logo.
****DECLARATION FOR LOGO INSERT
CONSTANTS: cntl_true TYPE i VALUE 1,
cntl_false TYPE i VALUE 0.
DATA:h_picture TYPE REF TO cl_gui_picture,
h_pic_container TYPE REF TO cl_gui_custom_container.
DATA: graphic_url(255),
graphic_refresh(1),
g_result LIKE cntl_true.
DATA: BEGIN OF graphic_table OCCURS 0,
line(255) TYPE x,
END OF graphic_table.
DATA: graphic_size TYPE i.
CALL SCREEN 100.
*&----
*& Module PICTURE OUTPUT
text
MODULE picture OUTPUT.
DATA: l_graphic_xstr TYPE xstring,
l_graphic_conv TYPE i,
l_graphic_offs TYPE i.
CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
EXPORTING
p_object = 'GRAPHICS'
p_name = 'EDS'"IMAGE NAME - Image name from SE78
p_id = 'BMAP'
p_btype = 'BCOL'
RECEIVING
p_bmp = l_graphic_xstr
EXCEPTIONS
not_found = 1
OTHERS = 2.
graphic_size = XSTRLEN( l_graphic_xstr ).
CHECK graphic_size > 0.
l_graphic_conv = graphic_size.
l_graphic_offs = 0.
WHILE l_graphic_conv > 255.
graphic_table-line = l_graphic_xstr+l_graphic_offs(255).
APPEND graphic_table.
l_graphic_offs = l_graphic_offs + 255.
l_graphic_conv = l_graphic_conv - 255.
ENDWHILE.
graphic_table-line = l_graphic_xstr+l_graphic_offs(l_graphic_conv).
APPEND graphic_table.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'image'
subtype = cndp_sap_tab_unknown " 'X-UNKNOWN'
size = graphic_size
lifetime = cndp_lifetime_transaction "'T'
TABLES
data = graphic_table
CHANGING
url = graphic_url
EXCEPTIONS
dp_invalid_parameter = 1
dp_error_put_table = 2
dp_error_general = 3
OTHERS = 4 .
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
CREATE OBJECT h_pic_container
EXPORTING container_name = 'LOGO'.
CREATE OBJECT h_picture EXPORTING parent = h_pic_container.
CALL METHOD h_picture->load_picture_from_url
EXPORTING
url = graphic_url
IMPORTING
RESULT = g_result.
ENDMODULE. " PICTURE OUTPUT
Reward points if helpful.
Thanks -
I want to print the LOGO on the report output
Hi ,
i want to print the LOGO on the report output. How can tyhis possible ?using "SMWO" to upload LOGO image.
add a customer "customer control" named P1 using "SE51"
the following program for your reference:
=============================================
REPORT ytest17.
DATA ok_code TYPE sy-ucomm,
save_code TYPE sy-ucomm.
DATA container TYPE REF TO cl_gui_custom_container.
DATA picture TYPE REF TO cl_gui_picture.
DATA init.
CALL SCREEN 100.
MODULE user_command_0100 INPUT
MODULE user_command_0100 INPUT.
save_code = ok_code.
CLEAR ok_code.
CASE save_code.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. "user_command_0100 INPUT
MODULE status_0100 OUTPUT
MODULE status_0100 OUTPUT.
IF init IS INITIAL.
DATA url(255).
CLEAR url.
CREATE OBJECT container
EXPORTING container_name = 'P1'.
CREATE OBJECT picture
EXPORTING parent = container
EXCEPTIONS error = 1.
IF sy-subrc NE 0.
ENDIF.
PERFORM load_pic_db CHANGING url.
CALL METHOD picture->load_picture_from_url
EXPORTING
url = url.
IF sy-subrc NE 0.
ENDIF .
init = 'X'.
ENDIF.
ENDMODULE. "status_0100 OUTPUT
*& Form
text
FORM load_pic_db changing p_url.
data query_table like w3query occurs 1 with header line.
data html_table like w3html occurs 1.
data return_code like w3param-ret_code.
data connect_type like w3param-cont_type.
data connect_length like w3param-cont_len.
data pic_data like w3mime occurs 0.
data pic_size type i.
refresh query_table.
query_table-name = '_object_id'.
query_table-value = 'TESTPIC'.
append query_table.
CALL FUNCTION 'WWW_GET_MIME_OBJECT'
TABLES
query_string = query_table
html = html_table
mime = pic_data
changing
return_code = return_code
content_type = connect_type
content_length = connect_length
EXCEPTIONS
OBJECT_NOT_FOUND = 1
PARAMETER_NOT_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
pic_size = connect_length.
ENDIF.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'image'
subtype = cndp_sap_tab_unknown
SIZE = pic_size
DATE =
TIME =
DESCRIPTION =
LIFETIME = cndp_lifetime_transaction
CACHEABLE =
SEND_DATA_AS_STRING =
FIELDS_FROM_APP =
tables
data = pic_Data
FIELDS =
PROPERTIES =
COLUMNS_TO_STRETCH =
changing
url = url
EXCEPTIONS
DP_INVALID_PARAMETER = 1
DP_ERROR_PUT_TABLE = 2
DP_ERROR_GENERAL = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
*& Module CANCEL INPUT
text
module CANCEL input.
LEAVE PROGRAM.
endmodule. " CANCEL INPUT
============================================= -
hi,
what are the minimum requirements to display logo in alv report at the top of the page.
i searched forums but did n't get the required answer.Hi
This code is to display logo in the report through alv grid
*& Report ZALVDEMO *
REPORT ZALVDEMO.
TABLES : J_1IEXCHDR, " header table
J_1IEXCDTL, " item table
J_1IPART2, " Excise Part II details
LFA1, " vendor master table
J_1IMOVEND, " vendor excise details table
MSEG, " Document Segment: Material
MKPF, " Header: Material Document
DD07T, " domain text table
T001W. " Plant and Branch Details
DATA : BEGIN OF IT_CHDR OCCURS 100,
DOCNO LIKE J_1IEXCHDR-DOCNO,
DOCYR LIKE J_1IEXCHDR-DOCYR,
EXNUM LIKE J_1IEXCHDR-EXNUM,
EXDAT LIKE J_1IEXCHDR-EXDAT,
WERKS LIKE J_1IEXCHDR-WERKS,
EXBED LIKE J_1IEXCHDR-EXBED,
EXCCD LIKE J_1IEXCHDR-EXCCD,
ECS LIKE J_1IEXCHDR-ECS,
END OF IT_CHDR.
DATA : BEGIN OF IT_CDTL OCCURS 100,
DOCYR LIKE J_1IEXCDTL-DOCYR,
DOCNO LIKE J_1IEXCDTL-DOCNO,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
LIFNR LIKE J_1IEXCDTL-LIFNR,
MATNR LIKE J_1IEXCDTL-MATNR,
MAKTX LIKE J_1IEXCDTL-MAKTX,
CHAPID LIKE J_1IEXCDTL-CHAPID,
EXBAS LIKE J_1IEXCDTL-EXBAS,
EXBED LIKE J_1IEXCDTL-EXBED,
ECS LIKE J_1IEXCDTL-ECS,
MENGE LIKE J_1IEXCDTL-MENGE,
MEINS LIKE J_1IEXCDTL-MEINS,
RDOC2 LIKE J_1IEXCDTL-RDOC2,
END OF IT_CDTL.
DATA TEXT(10).
DATA : BEGIN OF IT_OUT OCCURS 0,
SERIALNO LIKE J_1IPART2-SERIALNO,
TEXT1 LIKE TEXT,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
NAME LIKE LFA1-NAME1,
DDTEXT LIKE DD07T-DDTEXT,
EXCCD LIKE J_1IEXCHDR-EXCCD,
BUDAT LIKE MKPF-BUDAT,
EXBAS LIKE IT_CDTL-EXBAS,
EXBED LIKE IT_CDTL-EXBED,
ECS LIKE IT_CDTL-ECS,
MATNR LIKE IT_CDTL-MATNR,
MAKTX LIKE IT_CDTL-MAKTX,
CHAPID LIKE IT_CDTL-CHAPID,
MENGE LIKE IT_CDTL-MENGE,
MEINS LIKE IT_CDTL-MEINS,
DEL_IND(1),
END OF IT_OUT.
DATA IT_PART2 LIKE J_1IPART2 OCCURS 0 WITH HEADER LINE.
DATA S_NO(4) .
DATA DB_CNT LIKE SY-TABIX.
DATA EBELN_T LIKE MSEG-EBELN .
TYPE-POOLS : SLIS.
DATA : AFIELD TYPE SLIS_FIELDCAT_ALV.
DATA : LIST_HEADER TYPE SLIS_T_LISTHEADER,
FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
LS_FTCAT TYPE LVC_S_FCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
G_REPID LIKE SY-REPID,
G_BACK_GROUND(70), "like bapibds01-objkey,
GS_VARIANT LIKE DISVARIANT,
G_SAVE ,
GT_EVENTS TYPE SLIS_T_EVENT,
ALV_EVENT TYPE SLIS_ALV_EVENT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT,
LAYOUT_IN TYPE SLIS_LAYOUT_ALV,
LAYOUT_IN1 TYPE SLIS_LAYOUT_ALV.
CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
'USER_COMMAND',
GC_FORMNAME_BEFORE_OUTPUT TYPE SLIS_FORMNAME VALUE
'BEFORE_OUTPUT'.
ALV_EVENT TYPE SLIS_ALV_EVENT,
DATA EX_NO LIKE IT_CHDR-EXNUM VALUE 0.
DATA REGTYP_1 LIKE J_1IPART2-REGTYP.
SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
PARAMETERS WERKS TYPE J_1IEXCHDR-WERKS.
SELECT-OPTIONS : BUDAT FOR J_1IEXCHDR-EXDAT.
PARAMETERS : R1 RADIOBUTTON GROUP GRP DEFAULT 'X',
R2 RADIOBUTTON GROUP GRP.
SELECTION-SCREEN END OF BLOCK B.
INITIALIZATION.
G_REPID = SY-REPID.
G_SAVE = 'A'.
PERFORM BUILD_EVENT USING GT_EVENTS[].
PERFORM ALV_EVENT_INIT.
AT SELECTION-SCREEN.
REFRESH LIST_HEADER.
PERFORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER.
START-OF-SELECTION.
PERFORM ALV_EVENT_INIT.
G_REPID = SY-REPID.
G_BACK_GROUND = ' ' .
IF R1 = 'X'.
CLEAR R2. CLEAR : REGTYP_1.
REGTYP_1 = 'A'.
set titlebar 'BALAJI' with DB_CNT.
ELSEIF R2 = 'X'.
CLEAR R1.CLEAR : REGTYP_1.
REGTYP_1 = 'C'.
set titlebar 'BALAJI1' with DB_CNT.
ENDIF.
SELECT * FROM J_1IPART2
INTO CORRESPONDING FIELDS OF TABLE IT_PART2
WHERE REGTYP = REGTYP_1 AND
TRNTYP = 'GRPO' AND
BUDAT IN BUDAT.
DOCYR = IT_CDTL-DOCYR AND
DOCNO = IT_CDTL-DOCNO.
LOOP AT IT_PART2.
SELECT SINGLE * FROM J_1IEXCHDR
INTO CORRESPONDING FIELDS OF IT_CHDR
WHERE TRNTYP = 'GRPO' AND
DOCYR = IT_PART2-DOCYR AND
DOCNO = IT_PART2-DOCNO AND
WERKS = WERKS AND
exdat IN BUDAT.
ORDER BY EXDAT.
IF SY-SUBRC = 0.
APPEND IT_CHDR.
ELSE.
CONTINUE.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE E084.
ENDIF.
ENDLOOP.
LOOP AT IT_CHDR.
SELECT * FROM J_1IEXCDTL
INTO CORRESPONDING FIELDS OF IT_CDTL
FOR ALL ENTRIES IN IT_CHDR
WHERE
TRNTYP = 'GRPO' AND
DOCNO = IT_CHDR-DOCNO AND
DOCYR = IT_CHDR-DOCYR AND
EXNUM = IT_CHDR-EXNUM AND
EXDAT = IT_CHDR-EXDAT AND
WERKS = IT_CHDR-WERKS.
IF SY-SUBRC = 0.
APPEND IT_CDTL.
ELSE.
CONTINUE.
ENDIF.
ENDSELECT.
ENDLOOP.
LOOP AT IT_CDTL.
CLEAR TEXT.
DB_CNT = DB_CNT + 1.
READ TABLE IT_CHDR WITH KEY EXNUM = IT_CDTL-EXNUM.
READ TABLE IT_PART2 WITH KEY DOCNO = IT_CDTL-DOCNO .
IT_OUT-SERIALNO = IT_PART2-SERIALNO.
SELECT SINGLE NAME1 FROM LFA1
INTO IT_OUT-NAME
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM LFA1
WHERE LIFNR = IT_CDTL-LIFNR.
IF LFA1-LAND1 EQ 'IN'.
TEXT = 'INVOICE'.
IT_OUT-TEXT1 = TEXT.
ELSE.
TEXT = 'BOE'.
IT_OUT-TEXT1 = TEXT.
ENDIF.
SELECT SINGLE * FROM J_1IMOVEND
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM DD07T
INTO IT_OUT-DDTEXT
WHERE DOMNAME = 'J_1IVTYP' AND
DDLANGUAGE = 'EN' AND
DOMVALUE_L = J_1IMOVEND-J_1IVTYP.
IF DD07T-DDTEXT = 'First Stage Dealer of indigenous excisable goods'
OR
DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisablegoods'.
DD07T-DDTEXT = 'Dealer'.
ENDIF.
IT_OUT-DDTEXT = DD07T-DDTEXT.
ELSEIF DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisable
*goods'.
DD07T-DDTEXT =
CLEAR EBELN_T.
SELECT SINGLE LFBNR FROM MSEG
INTO EBELN_T
WHERE MBLNR = IT_CDTL-RDOC2 .
SELECT SINGLE * FROM MSEG
WHERE BWART = '106' AND
LFBNR = EBELN_T ."and
ebeln = ebeln_t.
IF SY-SUBRC = 0.
IT_OUT-DEL_IND = 'X'.
ELSE.
IT_OUT-DEL_IND = ' '.
ENDIF.
SELECT SINGLE BUDAT FROM MKPF
INTO IT_OUT-BUDAT
WHERE MBLNR = EBELN_T ."MSEG-LFBNR.
IT_OUT-EXNUM = IT_CDTL-EXNUM.
IT_OUT-EXDAT = IT_CDTL-EXDAT.
IT_OUT-EXCCD = IT_CHDR-EXCCD.
IT_OUT-EXBAS = IT_CDTL-EXBAS.
IT_OUT-EXBED = IT_CDTL-EXBED.
IT_OUT-ECS = IT_CDTL-ECS.
IT_OUT-MATNR = IT_CDTL-MATNR.
IT_OUT-MAKTX = IT_CDTL-MAKTX.
IT_OUT-CHAPID = IT_CDTL-CHAPID.
IT_OUT-MENGE = IT_CDTL-MENGE.
IT_OUT-MEINS = IT_CDTL-MEINS.
APPEND IT_OUT.
EX_NO = IT_CDTL-EXNUM.
ENDLOOP.
Title Portion
IF REGTYP_1 = 'A'.
SET TITLEBAR 'BALAJI' WITH DB_CNT.
ELSEIF REGTYP_1 = 'C'.
SET TITLEBAR 'BALAJI1' WITH DB_CNT.
ENDIF.
AFIELD-COL_POS = 1.
AFIELD-FIELDNAME = 'SERIALNO'.
AFIELD-SELTEXT_L = 'INPUTS'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 2.
AFIELD-FIELDNAME = 'TEXT1'.
AFIELD-SELTEXT_L = 'TYPE OF DOC'.
AFIELD-JUST = 'L'.
AFIELD-DECIMALS_OUT = '0'.
AFIELD-NO_ZERO = 'X'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 3.
AFIELD-FIELDNAME = 'EXNUM'.
AFIELD-SELTEXT_L = 'DOC.NO'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 4.
AFIELD-FIELDNAME = 'EXDAT'.
AFIELD-SELTEXT_L = 'DOC.DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 5.
AFIELD-FIELDNAME = 'NAME'.
AFIELD-SELTEXT_L = 'NAME OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 6.
AFIELD-FIELDNAME = 'DDTEXT'.
AFIELD-SELTEXT_L = 'TYPE-OF-SUPPLIER'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 7.
AFIELD-FIELDNAME = 'EXCCD'.
AFIELD-SELTEXT_L = 'ECC OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 8.
AFIELD-FIELDNAME = 'BUDAT'.
AFIELD-SELTEXT_L = 'INPUT RECV DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 9.
AFIELD-FIELDNAME = 'EXBAS'.
AFIELD-SELTEXT_L = 'ASSESSABLE-VALUE'.
AFIELD-DO_SUM = 'X'.
AFIELD-JUST = 'R'.
AFIELD-DECIMALS_OUT = '2'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 10.
AFIELD-FIELDNAME = 'EXBED'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN CENVAT'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 11.
AFIELD-FIELDNAME = 'ECS'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN E-CESS'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 12.
AFIELD-FIELDNAME = 'MATNR'.
AFIELD-SELTEXT_L = 'MATERIAL-CODE'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 13.
AFIELD-FIELDNAME = 'MAKTX'.
AFIELD-SELTEXT_L = 'DESCRIPTION'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 14.
AFIELD-FIELDNAME = 'CHAPID'.
AFIELD-SELTEXT_L = 'TARIFF-ID'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 15.
AFIELD-FIELDNAME = 'MENGE'.
AFIELD-SELTEXT_L = 'QUANTITY'.
AFIELD-JUST = 'R'.
AFIELD-DO_SUM = ' '.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 16.
AFIELD-FIELDNAME = 'MEINS'.
AFIELD-SELTEXT_L = 'UOM'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 17.
AFIELD-FIELDNAME = 'DEL_IND'.
AFIELD-SELTEXT_L = 'Deleted'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
* LAYOUT FOR ZEBRA CATLOG
LAYOUT_IN-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT_IN-ZEBRA = 'X'.
LAYOUT_IN-GET_SELINFOS = 'X'.
LAYOUT_IN-CONFIRMATION_PROMPT = 'X'.
LAYOUT_IN-DETAIL_POPUP = 'X' .
SORTCAT-decimals = '0'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_SAVE = G_SAVE
IS_VARIANT = GS_VARIANT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORTCAT
IS_LAYOUT = LAYOUT_IN
IT_EVENTS = EVENTCAT
I_BACKGROUND_ID = g_back_ground
TABLES
T_OUTTAB = IT_OUT.
*& Form TOP_OF_PAGE_LIST_HEADER
text
-->LIST_HEADERtext
FORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA : HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'ROOTS INDUSTRIES LTD' TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
SELECT SINGLE * FROM T001W WHERE WERKS = WERKS.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'PLANT :' TO TEXT.
WRITE WERKS TO TEXT+8.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-NAME1 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-STRAS TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-ORT01 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'DATE :' TO TEXT.
WRITE BUDAT-LOW TO TEXT+7.
IF BUDAT-HIGH NE ''.
WRITE 'TO' TO TEXT+18.
WRITE BUDAT-HIGH TO TEXT+22.
ENDIF.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
ENDFORM. "TOP_OF_PAGE_LIST_HEADER
*& Form ALV_EVENT_INIT
text
FORM ALV_EVENT_INIT .
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
ALV_EVENT-FORM = 'ALV_TOP_OF_PAGE'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
ALV_EVENT-FORM = 'ALV_TOP_OF_LIST'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_LIST.
ALV_EVENT-FORM = 'ALV_END_OF_LIST'.
APPEND ALV_EVENT TO GT_EVENTS.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_PAGE.
ALV_EVENT-FORM = 'ALV_END_OF_PAGE'.
APPEND ALV_EVENT TO GT_EVENTS.
ENDFORM. "ALV_EVENT_INIT
*& Form ALV_TOP_OF_PAGE
text
FORM ALV_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LIST_HEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "ALV_TOP_OF_PAGE
*& Form BUILD_EVENT
text
-->P_GT_EVENTS[] text
FORM BUILD_EVENT USING P_EVENTS TYPE SLIS_T_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_BEFORE_OUTPUT TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENT
this wud help u -
How to transport Parameter changes in a crystal report
Hi All,
Very Good morning!!!
I have designed a crystal report with static parameters. Earlier i used to have a dropdown kind of input selection for my parameters.
Now i got a new requirement for a direct input in the field....tht means no dropdown ...single date field is to be entered directly.
Accordingly i have removed the dropdown and changed to a single direct date field. I saved these changes to a request and transported to quality. Not sure whether the parameter changes are collected into a request.
Whereas i couldn't found any changes of my parameters in quality. They are as same dropdown manner in the quality whereas i need them to be a direct field date entry which did not affected the quality server after transporting the changes.
Could some one please let me know how to reflect these changes in quality server regarding parameter changes in a crystal report for BW.
Thanks in Advance.
JitendraPlease re-post if this is still an issue or purchase a case and have a dedicated support
engineer work with your directly -
Print Logo in Classic Report (Write Method,Not ALV)
Hi All,
I'm currently doing conversion of the All the Classic Report with addition of Header with 'LOGO'.
I'm willing to find out that Function (CALL FUNCTION 'WWW_GET_MIME_OBJECT') is only able for display but not show out during printing.
Is that any method, I can do it(Print with Logo) without conversion to SAP Script or Smartform that was exhausted.
*Please take note is Classic Report with Write Method (Line by Line), Not ALV.
Thank you all in advance
Regards,
Trevor Wong.Hi,
It is possible to include logo in classical report but its not possible to print logo in classical report. It can be done in ALV's.
Write the code in Top-of-page event in ALV.
The following is the code for inserting the logo in ALV.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
I_LOGO = 'ENJOYSAP_LOGO'
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM.
Regards
Purnand -
Need to print the company logo in alv report
Hi All ,
I am displaying an alv grid for some QM report .
I have used top-of-page event and 'REUSE_ALV_COMMENTARY_WRITE ' FM to display the logo and header . Every thing is working fine .
But when I am taking the print-out the logo is not getting printed . Except logo everything is coming in the print out.
So please help me if you have any idea ragarding how to print the logo in the report.
regards
Satishprint the logo is really simple, check this little sample:
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'Z_LOGO'
it_list_commentary = gt_list_top_of_page.
and how to upload the logo in this link:
uploading logo
regards
Edited by: Sebastian Bustamante on Sep 24, 2008 3:26 PM -
Hi
Please share the process to change logo in obiee 11g.
Thanks.Hi,
Change Catolog to ABC Catalog
D:\Oracle\Middleware\Oracle_BI1\bifoundation\web\msgdb\l_en\messages\uicmsgs
*1. saw.availabledata*
<WebMessage name="kmsgCatalogCaption"><TEXT>Catalog</TEXT></WebMessage>
*2. saw.catalog*
<WebMessage name="kmsgCatalogStartingWindowTitle"><TEXT>Oracle BI Catalog</TEXT></WebMessage>
<WebMessage name="kmsgCatalogWindowTitle"><TEXT>%0% - Oracle BI Catalog</TEXT></WebMessage>
*3. saw.header*
<WebMessage name="kmsgHeaderCatalogPage"><TEXT>Browse Catalog Folders...</TEXT></WebMessage>
Oracle logo to Company Logo
Drive:\Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\sk_blafp\login
Drive:\Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\sk_blafp\b_mozilla_4
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\sk_blafp\b_mozilla_4
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\sk_blafp\login
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\sk_blafp\b_mozilla_4
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\sk_blafp\login
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\_WL_user\FMW Welcome Page Application_11.1.0.0.0\upd42q\war\images
Change Powered By
Drive:\Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\s_blafp\images
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
Thanks,
Balaa... -
Is there any transaction code for uploding logo in ALV reports.
is there any transaction code for uploding logo in ALV reports.
hi,
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform.
Upload Logo for REUSE_ALV_COMMENTARY_WRITE
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable. -
Changes to Create expense report
Hi everyone!
Could anyone fill me up on how to change the "create expense report" standard application hosted on in portal(Java). I have no experience on Netweaver studio. a step-by step procedure to change some basic functionalilty will help.
Thanks!check the note 1977668 Web: country & region as separate fields Apply the note and make the entry in TA20SWITCH view as described. in the Webdynpro application you can choose: - either you take the combined dropdownbox for all country / region combinations - or you can take the seperate fields but then you must have for all countries an entry with region space.
Maybe you are looking for
-
Making Markings in .PDF File
I'm playing a cool game. It's an old RPG-type game that uses the manual, which I have in .PDF. In that .PDF, there's, like, a list of quests and stuff. I'd like to be able to check stuff off on the page of the book in the .PDF. You know, as if usi
-
Urgent :SQL Loader Arabic Character Set Issue
HI all, I am loading arabic characters into my database using SQL Loader using a fixed length data file. I had set my characterset and NLS_LANG set to UTF8.When I try to load the chararacter 'B' in arabic data i.e. ' لا ' , it gets loaded as junk in
-
How to divide result in 80/20
Hi I have bit different requirement. I have table A which has 1000 records. Now I was insert 80% of record from table A into Table B80 and remaining 20% in C20 How can I do that.
-
My computer had crashed. I tried most everything and had to resort to re installing my os x tiger discs. When my computer crashed, I was running snow leopard. I do not have the disc for it. Anyhow, I am now trying to download things and it is saying
-
Split-Screen (Preview Pane) View in Mail
Within Mr. Jobs keynote video back in January, he demoed a split screen view in Mail while viewing your inbox. This view shows a preview pane beneath the message. Yet I found no where in the settings to achieve this. Am I missing something?