Change Movie Parameter Dynamically

This is more of a javascript question but I figure
actionscript folks would have run across this before.
Is there a way, using javascrit , to change a movie's
parameters, dynamically, AFTER the movie has been embeded?
I know you can change some parameters (see links below) but
specifically I am looking to change the wmode parameter.
I have looked at:
http://www.adobe.com/support/flash/publishexport/scriptingwithflash/
and
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_12059
But this documentation appears to be 3 to 6 years old and I
am hoping things have changed. Any easter eggs out there realtive
to this that anyone has found?
TIA
Steve

Hi,
we can use cascading parameters
http://bifuture.blogspot.in/2011/07/ssasssrs-cascading-parameters-in-ssrs.html
http://bi-junkie.com/index.php/item/6-ssrs-cascading-filters-through-mdx
http://blogs.msdn.com/b/sqlforum/archive/2011/04/11/forum-faq-how-do-i-create-cascading-parameters-when-using-cube-database-in-reporting-services.aspx
http://gnanadurai.blogspot.in/

Similar Messages

Why i cant change log_buffer parameter dynamically

hi , why dont i can change the log_buffer parameter dynamically by alter system command.
ORA-02095: specified initialization parameter cannot be modified

It's because log_buffer has DML images. Oracle can't risk redo information, since it's a main source for recovery. At any cost oracle don't want log_buffer to be corrupted. This why log_buffer in most of the OS gets the GUARD PAGE protection.
Thanks and Regards,
Satheesh Babu.S

How to change the image dynamically depend upon the input parameter

Hi All
I have one report running depend upon the Organization specific, I have 15 operating unit and 15 different logo for each operating unit.
How to change the Logo dynamically depend upon the input passed by the user.
If I have three or four logo i can add in my layout using if else statement and its works fine but i have more that 10 logos so its no possible to keep these in My RTF Template.
Is it possible to change the logo according to the input without keeping this in Template.
I have seen this link but its not working fine
http://erpschools.com/articles/display-and-change-images-dynamically-in-xml-publisher
Regards
Srikkanth.M

Hi,
I have not completed fully,so sorry i cant able to share the files, could you please give me some tips and steps to do.
Without having the logo in RTF if it possible to bring the logo depends on the user input (Ie Operating unit).
Regards
Srikkanth

How to calculate the Percent change in a dynamic

hi All,
I'm trying to get the percent increase/change of two dynamic
colums. In my report, the user has a checkbox where he can select two colums to calculate the percent growth.
My DataSet is PilarName, Calification(is a decimal value) and Period (this is a string). I created the Matrix this way:
PilarName [Period]
[PilarName] [Calification]
Which give me these values:
So, now I need to create another column to calculate the percentage change between these two colums. I tried this:
I added a Adjacent column group for Period column and I grouped by the calculated column "ColumnDiff". Add the following expression.
=(SUM(Fields!Calificacion.Value)- Previous(SUM(Fields!Calificacion.Value),"ColumnDiff"))/Previous(SUM(Fields!Calificacion.Value),"ColumnDiff")
After that I get:
I'm getting the sum of the two columns instead.
Any clue about what I'm doing wrong? Please help me, I've been looking for the answer but any solution works for me.
Luis Carlos

Hi Luis,
According to your description, you have a report with different dynamic columns. Now what you want is show your user percentage growth in your matrix report after your user select two of those columns (I think you may use parameter to achieve your “checkbox”
function). Is my understanding correct?
In Reporting Service, we can’t calculate dynamic columns with our build-in arrogation functions. So we need to add custom code into our report, and call those functions which defined in custom code in our expression. We have tested your scenario in our local
environment. Here are steps and screenshots for your reference.
Go to your Report Properties, add the custom code below into your report:
Dim Shared Num1 As Double
Dim shared Num2 As Double
Public Function GetCalification(Calification as Double,Type as String,Type2 as String)
If Type = Type2 Then
Num1=Calification
Else
Num2=Calification
End If
Return Calification
End Function
Public Function GetPec()
Return (Num2-Num1)/Num1
End function
Create a matrix. Put PilarName into Row field, put Period into Column field. In Data field, put the expression below into the textbox:
=Code.GetCalification(Fields!Calification.Value,Fields!Period.Value,Parameters!Period.Value(0))
In our sample report, we created a parameter (named Period) for selecting two columns. You can replace “Parameters!Period.Value(0)” with your own parameter.
Add an outside column at right (%Growth), put the expression below into the textbox:
=Code.GetPec()
Save and preview. The matrix and result looks like below:
Reference:
Custom Code and Assembly References in Expressions in Report Designer (SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to change any parameter in gradient?

Why I can not change any parameter in an existing gradient?
For example: one pageitem have gradient and i can see (in vba locals) its parameters:
FillColor.Angles
FillColor.Matrix
FillColor.Origin
FillColor.Length
But nothing change.

setListVOBoundContainerColumn method can be used on poplist bean to set value from current row of table dynamically.
Regards,
Ram

Change the Parameter as Select option

Hi Guy's,
Please help me friends, present requirement is like this : change the Parameter into Select-Option.
Here they are using one function module, this function module import parameter taking single value, how loop this function module with in this select-option.
PARAMETERS p_fictr LIKE fmfctr-fictr.
START-OF-SELECTION.
Move the select options to internal tables (import parameter for fn)
move_sel_option : sel_buk   s_bukrs ,
                     sel_pern s_pernr ,
                     sreinr    s_reinr ,
                     spdatv    s_pdatv ,
                     sberei    s_berei .
Call the function to get all trips corresponding to sel criteria
CALL FUNCTION 'ZHR_GET_FUND_TRIPS'
    EXPORTING
      p_fictr = p_fictr
      p_sub   = p_sub
    TABLES
      s_bukrs = s_bukrs
      s_pernr = s_pernr
      s_reinr = s_reinr
      s_pdatv = s_pdatv
      s_berei = s_berei
      i_trip = i_trip
    EXCEPTIONS
      OTHERS = 1.
Thanks and Regards,
Sai

hi,
You can first the field values using the select statement and then loop that internal table and pass the values to the function module.
try this
*PARAMETERS p_fictr LIKE fmfctr-fictr.
select-options: s_fictr for fmfctr-fictr.
START-OF-SELECTION.
Move the select options to internal tables (import parameter for fn)
move_sel_option : sel_buk s_bukrs ,
sel_pern s_pernr ,
sreinr s_reinr ,
spdatv s_pdatv ,
sberei s_berei .
select fictr
   from fmfctr
   into tabel itab
where fictr in s_fictr.
loop at itab.
Call the function to get all trips corresponding to sel criteria
CALL FUNCTION 'ZHR_GET_FUND_TRIPS'
EXPORTING
*p_fictr = p_fictr
p_fictr = itab-fictr
p_sub = p_sub
TABLES
s_bukrs = s_bukrs
s_pernr = s_pernr
s_reinr = s_reinr
s_pdatv = s_pdatv
s_berei = s_berei
i_trip = i_trip
EXCEPTIONS
OTHERS = 1.
endloop.
regards,
Veeresh

What is the maximum size of the application to download to iPad via GSM. Is it 20 Mb? Is it possible to change this parameter?

What is the maximum size of application to download to iPad via GSM. Is it 20 Mb? Does exist any possibility to change this parameter? In the towm where I live there is lack of wifi and the only possibiluty to download something from Apple Store is to use GSM/3G.

It has partly to do with the carrier. From what I've summized from reviews & feedback online is since Apple iPhone was the most advanced phone on the market when it was initially released the carriers were concerned about using up bandwidth with the apps & movie downloads so a limit was intially set for 10mb max on 3G connection. Later apple raised the limit, against the carrier's advice, to 20mb max.
The interesting part is the limitation doesn't exist on Android phone when they also have large apps & movies which are available for download & they use the same networks the iPhone uses! So why are the iPhone users still limited to the amount they can download at once while the Android users are not. They pay the same for thier data plans, if not less in some cases, that iPhone users do!

How change NLS_NUMERIC_CHARACTERS parameter for load external table

Hi,
I use this version:
OWB 11gR2
Database 11gR2
Parameter NLS_NUMERIC_CHARACTERS Database ., Instance ,.
When I created database with wizard and in this moment I don't set spanish language, later I changed this parameters in instance parameters.
Now I want load data from a file to external table, but I've an error when I try load data with decimal point.
why does it use the database parameter instead of instance parameter?
Is possible to change this parameter?
Cheers
Marisol

At this moment , this is not possible . You can see metalink note ID 268906.1.
It says:
Currently, external tables always use the setting of NLS_NUMERIC_CHARACTERS
+at the database level.+
Cheers
Marisol

How to change VO's dynamically for a item for each row in advanced table?

Hi All,
We had a requirement to filter the employees based on the search criteria table. I am using advanced table for developing search criteria.
In that table I am having three columns. Operator (messagechoice), Criteria Type (messagechoice), and Criteria value (messageLovInput). Also 'Add Another Row' functionality is available.
My requirement is:
First Row:(Initial Row)
When the user selects a value in Criteria Type, only the values that are relevant to that type should be displayed in the Criteria Value.
Second Row: (when the user selects Add Another Row button)
When the user selects a value in Criteria Type, only the values that are relevant to that type should be displayed in the Criteria Value.
The problem I am facing here is, the Criteria Value column is pointing to only one VO at design time. But wee need to change that VO dynamically without disturbing other rows depending on the Criteria Type value.
Is it possible to do so?
Note: User can add n number of conditions as he want.
Can anyone help how to acheive this.
Regards,
Sundeep.

Check Dynamic Poplist section under Standard Web Widgets in Chapter 4 of OA Framework Developers guide.

How to change the images dynamically in a table.

Hai,
How to change the images dynamically in a table based on the condition in webdynpro abap.
Edited by: Ravi.Seela on Oct 13, 2011 2:17 PM

This has been much discussed earlier. Do search posts.
For your scenario i would do the following.
inside your node which is binded to the table, i create a new node image with cardinality 1 ..1 and a attribute called path of type string.
create a supply function for the node image .
Supply method now has a Element (Parent element ) and node.
Based on your record in element, set the right image source to path attribute and bind the node.
This will make sure that the framework calls the image supply function for every row in a table.

How to change VO query dynamically

Hi,
Iam trying to change the VO query dynamically. My req. is I have 6 columns in a header page 3 columns(default single column) for sorting purpose and another 3 columns(default single column) for data querying purpose.
al these are in one view so I have created one VO.
Sorting Searching
A A
B B
C C
When I give any values in Sorting and hit submit button VO query should change dynamically.
I have searched older post regarding this.
My query is some thing like this
SELECT * from cust_table where a = NVL(:1 ,a)
UNION
SELECT * from cust_table where a<> NVL(:1 ,a)
order by a
Iam trying to pas the below part dynamicaly in my AM method
vo.setWherecaluse("where a = NVL(:1 ,a)
UNION
SELECT * from cust_table where a<> NVL(:1 ,a)
order by a ")
and trying to pass the params to that query. But it is not working.Giving error "Bind variable could not find"
Can any one suggest how to solve the issue.
Thanks,
Mahesh

Hello Ajay,
THanks for your response.
My vo query is select col1,col2,col3,col4,col5,col6 from cust_table;
and and changing vo.setwhereclause dynamically based on different scenerios.
in one scenerio i need my query to be some thing like
SELECT col1,col2,col3,col4,col5,col6 from cust_table where a = NVL(:1 ,a)
UNION
SELECT col1,col2,col3,col4,col5,col6 from cust_table where a <> NVL(:1 ,a)
order by a
so can i concatenate my vo.setwhereclause like *"where a = NVL(:1 ,a) UNION SELECT col1,col2,col3,col4,col5,col6 from cust_table where a NVL(:2 ,a) order by a"*
in the setwhereclause iam setting bind variables is this method correct? Hope it is clear pleaselet me know if it is not clear I will explain in detail.
Thanks,

How change the graph dynamically based on pivot table.

Hi,
My Report having pivot table and bar chart. Organization Name column set as pivot table prompts in pivot table.So Organization Name is appear as dropdown list.If i choose the diffrent Organization Names the pivot table data is according to the Organization Name but no changes in chart.How change the Graph dynamically based on pivot table.
Please help on this.

ok.I created pivot table with 4 columns and created chart using pivot table chart options but all 4 columns are displaying chart.But I need only 2 column in chart ..unable to edit the only chart in pivot table.Please help on this.Thank you..

[svn:osmf:] 14180: PARB changes: Move BinarySearch to layout package, it doesn't need to be part of the public API.

Revision: 14180
Revision: 14180
Author:   [email protected]
Date:     2010-02-15 21:52:51 -0800 (Mon, 15 Feb 2010)
Log Message:
PARB changes: Move BinarySearch to layout package, it doesn't need to be part of the public API.
Modified Paths:
    osmf/trunk/framework/OSMF/.flexLibProperties
    osmf/trunk/framework/OSMF/org/osmf/layout/LayoutRendererBase.as
Added Paths:
    osmf/trunk/framework/OSMF/org/osmf/layout/BinarySearch.as
    osmf/trunk/framework/OSMFTest/org/osmf/layout/TestBinarySearch.as
Removed Paths:
    osmf/trunk/framework/OSMF/org/osmf/utils/BinarySearch.as
    osmf/trunk/framework/OSMFTest/org/osmf/utils/TestBinarySearch.as

Revision: 14180
Revision: 14180
Author:   [email protected]
Date:     2010-02-15 21:52:51 -0800 (Mon, 15 Feb 2010)
Log Message:
PARB changes: Move BinarySearch to layout package, it doesn't need to be part of the public API.
Modified Paths:
    osmf/trunk/framework/OSMF/.flexLibProperties
    osmf/trunk/framework/OSMF/org/osmf/layout/LayoutRendererBase.as
Added Paths:
    osmf/trunk/framework/OSMF/org/osmf/layout/BinarySearch.as
    osmf/trunk/framework/OSMFTest/org/osmf/layout/TestBinarySearch.as
Removed Paths:
    osmf/trunk/framework/OSMF/org/osmf/utils/BinarySearch.as
    osmf/trunk/framework/OSMFTest/org/osmf/utils/TestBinarySearch.as

[svn:osmf:] 14181: PARB changes: Move DateUtil to f4mClasses, it doesn' t need to be part of the public API.

Revision: 14181
Revision: 14181
Author:   [email protected]
Date:     2010-02-15 21:57:55 -0800 (Mon, 15 Feb 2010)
Log Message:
PARB changes: Move DateUtil to f4mClasses, it doesn't need to be part of the public API.
Modified Paths:
    osmf/trunk/framework/OSMF/.flexLibProperties
    osmf/trunk/framework/OSMF/org/osmf/elements/f4mClasses/ManifestParser.as
Added Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/f4mClasses/DateUtil.as
Removed Paths:
    osmf/trunk/framework/OSMF/org/osmf/utils/DateUtil.as

Revision: 14181
Revision: 14181
Author:   [email protected]
Date:     2010-02-15 21:57:55 -0800 (Mon, 15 Feb 2010)
Log Message:
PARB changes: Move DateUtil to f4mClasses, it doesn't need to be part of the public API.
Modified Paths:
    osmf/trunk/framework/OSMF/.flexLibProperties
    osmf/trunk/framework/OSMF/org/osmf/elements/f4mClasses/ManifestParser.as
Added Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/f4mClasses/DateUtil.as
Removed Paths:
    osmf/trunk/framework/OSMF/org/osmf/utils/DateUtil.as

When to change COMPATIBLE parameter while upgrading to Oracle 11G

We are planning to upgrade from Oracle 10.2.0.4 on AIX to Oracle 11.2.0.2 soon.
While reading oracle upgrade documents and from oracle upgrade blog, it is mentioned that once we change compatible parameter,
we will not be able to catdwgrd.sql to downgrade.
However, if we don't change compatible parameter after an upgrade, all the testing efforts during upgrade process wont be complete
as we may need to do another round of testing after changing this value.
So what is the best time for changing this compatible parameter? 1 week or 2 weeks after upgrade?
We are considering catdwgrd.sql as our option to fallback if something goes wrong.
Thank You
Sarayu

Hi,
It's a difficult question. If your applications are validated with 11gR2, if your OS is certified to work with Oracle 11gR2, if you adjusted the requirements etc. it will work. Will it work 100% well ? Maybe not but downgrading is really an extreme solution. 11gR2 is a fully supported version and anyway you will obtain efficient support from Oracle if you encountered a bug etc.
If you have doubts change when you are sure every critical activity/charge you expect went well for example. We cannot know if it will be after 1 week or 2 weeks : it's up to you.
Be sure you check what Tom says about the COMPATIBLE parameter (it's interesting to know exactly what it covers, it does not cover the optimizer features etc.) : http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:485421569569
Best regards
Phil

Change Movie Parameter Dynamically

Similar Messages

Maybe you are looking for