Change My Hand Pointer on rollover a Buton?

Hi, i have 4 butones made on flash.,now i have a customize pointer  also,that drugs on my movie,and now i want to do when i pass with my  pointer on rollover at the butones,to change my hand pointer into the  one that ihave made_
movie hand pointer.
wich are the actions that i have to give?
i have this code with as 3.0 until now.this code is only for my pointer  mouse that i have.
Mouse.hide();
pointer_mc.startDrag("true");
Mouse.hide();
pointer_mc.startDrag(true);
this.onMouseMove = function ()
if (_xmouse < 4 || _ymouse < 4 || _xmouse > Stage.width - 4  || _ymouse > Stage.height - 5)
pointer_mc._alpha = 0;
else
pointer_mc._alpha = 100;
} // end else if
whats the code that i have to give for the movie handpointer_mc to work  when i rollover a buton to show mine,and not the browser one white.
thanks guys!

That is AS2 code so you best post your question in the AS2 forum.

Similar Messages

  • Mouse arrow will not change to hand pointer

    My mouse pointer is an arrow and will not change over to a hand pointer when over the tag, why not??

    Is the Caps Lock on?

  • Make a hand pointer appear on rollover a Buton?

    Hi, i have 4 butones made on flash.,now i have a customize pointer   also,that drugs on my movie,and now i want to do when i pass with my   pointer on rollover at the butones,to change my hand pointer into the   one that ihave made_
    movie hand pointer.
    wich are the actions  that i have to give?
    i have this code with as 3.0 until now.this  code is only for my pointer  mouse that i have.
    Mouse.hide();
    pointer_mc.startDrag("true");
    Mouse.hide();
    pointer_mc.startDrag(true);
    this.onMouseMove = function ()
    if (_xmouse < 4 || _ymouse < 4 || _xmouse > Stage.width - 4   || _ymouse > Stage.height - 5)
    pointer_mc._alpha = 0;
    else
    pointer_mc._alpha = 100;
    } // end else if
    whats the code that i have to give for the movie handpointer_mc to  work  when i rollover a buton to show mine,and not the browser one  white.
    thanks guys!

    when a rollover occurs, assign pointer_mc's _visible property to false and your hand pointer's _visible property to true and start dragging your hand pointer.
    when a rollout occurs, assign pointer_mc's _visible property to true, your hand pointer's _visible property to false and start dragging pointer_mc.

  • FLASH PLAYER 11.2.202 = NO HAND POINTER/CURSOR IN SAFARI

    Flash Player 11.2 r202.233
    Mac OS X 10.7.3 / Safari 5.1.5
    Known issue: the mouse cursor does not change to hand pointer when mousing over TLF links like buttons and active clips (3060839).
    Annoying one..
    Is Adobe addressing this??

    Could you please open a new bug on this over at bugbase.adobe.com?  Please include a specific URL, a copy of your dxdiag report and any additional information you think might be relevant.  After adding the bug, please post back with the bug URL so that others affected can add their votes.
    In addition, could you try disabling hardware acceleration to see if that makes any impact?
    How do I disable or enable hardware acceleration?
    Thanks,
    Chris

  • My iPad was hacked through Words With Friends. Suddenly the tiles change and the points quadruple and I can't get control of the game.  I deleted the app, but how can I make sure the virus hacker is gone?

    iPad hacked from Words With Friends. Game suddenly appears in control.  Not responsive. Suddenly my tiles change, then the points quadruple. I deleted the app, but would really like to continue playing with my family.  How can I get rid of this hacker and or virus on my iPad?

    Since it has happened previously, it is likely someone you know or who has access to your systems, or has access to recovery information with that game vendor. I seem to recall that vendor being called out for account security issues in the past, but can't say for sure.On the other hand, the symptoms you describe do not necessarily mean you have been "hacked", could be just that something is amiss with the app.
    You may wish to reach to the app vendor and see what sort of support it offers.

  • Change a Mount Point

    I have a Lucent Mars WinModem, so I installed the Martian Driver to make Linux see the modem.  I can now connect to the Internet using wvidal, but none of my applications notice that I am connect to the Internet.  I know I am connected because the modem makes its usual sounds.  Am I missing a daemon that I need for my applications to be able to communicate properly? 
    Martian, by default, mounts the modem to /dev/ttySM0.  If I could change that mount point to something like /dev/modem I could try it with KPPP.  KPPP just does not have /dev/ttySM0 in its drop-down box of mount-points. 
    Martian documentation is sparse, so I have no idea if it is possible to change martian's settings.
    Last edited by Kienja Kenobi (2007-09-02 01:11:00)

    Usually /dev/modem is a symlink. You can create this file by hand for testing purposes.
    Yes, I was able to create a link to the actual modem that KPPP could use, but then KPPP ran into errors of its own.  (I am working on this in another thread)
    Maybe wvdial is not setting the default route, I've never used it, so I can't help you with that, but you can try to set the default route to the ppp0 interface when it is created.
    How do I set the default route?  What is the ppp0 interface?
    Last edited by Kienja Kenobi (2007-09-03 01:25:33)

  • Position of items in a region changes when changing region display point

    Hi all,
    I encounter a strange behaviour of items when changing the display point of a reports region from default (Page Template Body (3)) to anything else.
    If set to Body (3), my items are correctly displayed above the report, but else they are displayed below.
    Changing the sequence numbers does not affect this.
    To clarify what I mean I created a sample application:
    http://apex.oracle.com/pls/otn/f?p=16478:1
    Is there any possiblity to influence whether items in a reports region are displayed below or above the report table? - I did not find anything...
    TIA,
    Felix

    If you read the description of those other regions you'll clearly see "items below region content" rather than "items above region content", like the page template body region #3.
    This is one limitation of the ApEx region templates that some would like to see improved - meaning, allowing for more flexibility.
    Earl

  • Change cursor to pointer in spry photo gallery

    Can anyone help me, I have created a website using Adobe's Spry Photo album and I need the cursor to change to a pointer to give the user an indication that there will be an action occuring when the thumbnail in the gallery is clicked.
    Dave Powers suggested that I use a "hover pseudo-class" and gave me this code and suggested I put it into my Style sheet.
    .thumbs:hover {
       cursor: pointer;
    I tried this but it did not work.
    The website is: www.artizancreations.co.uk
    Have I put this code in the wrong place, if so where should it go?
    Regards
    P

    poloswartzenegger wrote:
    Hi Nadia, thanks for the input, I tried your suggestion and the cursor remained the same. I am trying the suggestions before uploading to my server, that is why you will not find David's code anywhere.
    Ah, that confirms why I couldn't see it  :-)
    copied and pasted directly into the css stylesheet initially, but that did not work. Do I have to create a new rule in the style sheet and if so would it be a class? and once that rule has been made how do I add the code?
    Well, into the stylesheet would be better because if you have the a similar gallery on another page, the other pages will read it too, if they are linked to the stylesheet.
    Yes, it is a class.
    Perhaps .thumbs should read .thumbnails as I do not think thumbs is anywhere in my code?
    If there is a .thumbnails class in your current stylesheet and it refers to the styling of the thumbnails, then yes, replace thumbs with thumbnails and see if that works.
    On a very quick look, I couldn't see a class for the thumbnails, all I could see what a class for the .thumbsContainer.
    I'm only going by the code that David supplied you to make sure you place it in the correct place for testing purposes.  I have not used this gallery before and am not sure of all the styles associated with it.

  • Can you change the anchor point of a swf in CP5.5?

    I have created a small swf in Flash and have published it.
    I've imported the swf into CP5.5 and applied an effect of anti clockwise rotate and assymetric zoom out in an effort to get it to spiral backwards into oblivion.
    However, it seems to rotate the swf from the top left corner.
    Is there a way to change this anchor point to the centre of the swf?
    Regards

    Col,
    The anchor point of an object in Captivate is always the top left corner of the bounding box. No way to change it (have been pleading for that since long). Only exceptions are Rotate and motion effects, where the center is used.
    Lilybiri

  • How can i change the mouse pointer image?

    Hi friends!!
    It's possible to change the mouse pointer image in Swing?
    Thanks a lot.

    There's a setCursor() method on the frame component.

  • Changing a Mouse pointer

    I would like to be able to change my mouse pointer to something other that what set_application_property cursor_style can do for me. I would like to be able to call a mouse pointer from the file system and replace the the pointer in my forms app.
    Thanks in advance for any direction that can be given.

    Guys...
    I need some help!!
    Was the question not clear??
    Does it need a rephrasing???

  • I would suggest a new feature:The possibilty to change the mouse pointer icon when you hover on an a

    I would suggest a new feature:The possibilty  to change the mouse pointer icon when you hover on an active link by any other one icon I select.

    Current Firefox versions have a feature called tear-off tabs.<br />
    You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.<br />
    You can drag that tab back to the tab bar in the original window to undo that detaching.
    bug489729 (Disable detach and tear off tab):
    * https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

  • Change in Shipping Point

    Hi gurus,
    I have raised a sales Order and shipping point is determined in that order. But while creating Outbound delivery i decided to send it through different Shipping Point.
    Can anyone please let me know how to change the Shipping Point at creating Outbound delivery.
    NOTE: I DONT HAVE AUTHORIZATION TO MAKE CHANGES IN THE SALES ORDER.

    hi,
    you cannot have delivery for an item having a different shipping point at delivery than is proposed at the sales order level.
    the copy control rountines between order to delivery ensure this.
    However if there is a business requirement like this wherein you may need to change the shipping point, take the required authorization to do so, than thinking of any customization.
    regards
    sadhu kishore

  • Change the end point URL in WSDL for web-service

    Hi All,
    Morning , could someone please help us with this question, we are stuck with this currently.
    In SOA Suite 10g as well 11g we have a jsimple Java class whose one of the methods is exposed as a web service.
    In the project it has created the WSDL as well and have deployed the .ear file to the servers from EM console successfully.
    Now we need to migrate this web service to testing & production environments.
    1. Could someone please let us know the steps as to how do we change the end point url in the WSDL for this web service (present in web content --> WEB-INF/wsdl path in the j-developer project) for migration in case of both 10g (OC4J) as well 11g (WLS) servers.
    2. Also could this change/update be done prior to deployment as well as post deployment as well.
    Looking forward to inputs regards this...as we are stuck with this ..would be very helpful
    Thanks as always for help & guidance..

    Hi
    As Vijay mentioned, you develop a WebService in JDeveloper and test in JDeveloper integrated Weblogic Server say at http://localhost:7101/MyWebService/MyPort?wsdl. Thats it. Once it is working. Export it into a .WAR file. If you have any other supporting EJB JARs etc, put all these into a full blown .EAR at application level. NOW deploy this .EAR or .WAR into any Domain on any host and any port. DOES not matter. That server's host and port will be taken. Infact even if this other domain is Clustered domain, still it will work by giving webserver host and webserver port that sits in front of the cluster.
    I develop my webservices in JDeveloper and test at 7101 port. This .WAR gets deployed in QC Env at qchost:qcport. Same .WAR deployed to UAT at uathost:uatport and finally to prod also at prodhost:prodport.
    Its just the Client (WebService Proxy) that is calling this WebService need to use appropriate host and port based on which Env it is connecting to. For this, simply do not hard code WSDL URL in the java code or anywhere. Simply get it from a .properties file using a key value pair like this.
    WSDL_URL=http://host:port/MyWebService/MyPort?WSDL.
    Now have Environment specific values for above key and put that properties file in that domain root folder. And in your code always refer this key.
    You can use many approaches along the above lines.
    If your WebServies proxy is a webservice adapter say within bpel, still you can modify the value using deployment plan .xml file file while deploying.
    I would not absolutely prefer opening war file from ear and modifying war and updating ear file etc etc. Also do not have multiple EARs for Environment specific. Just have only one single EAR or WAR file that can be deployed to any environment.
    Thanks
    Ravi Jegga

  • SignalExpress 2010 - Chart time axis format will not change to floating point or anything else

    I just downloaded and installed the new and shiny SignalExpress 2010 to replace the old version. And immediately run into major problems:
    The x-axis time format refuses to change to floating point or scientific even if I choose them from chart properties. The format is always absolute, e.g. 12:23:54.743. This makes the usage of the chart and the whole application impossible! Is this a known issue and is it going to be fixed soon? And where can I get the old version of the SignalExpress (2009) so I can install it again?

    Here is a screenshot of the problem:

Maybe you are looking for