Make a hand pointer appear on rollover a Buton?

Hi, i have 4 butones made on flash.,now i have a customize pointer also,that drugs on my movie,and now i want to do when i pass with my pointer on rollover at the butones,to change my hand pointer into the one that ihave made_
movie hand pointer.
wich are the actions that i have to give?
i have this code with as 3.0 until now.this code is only for my pointer mouse that i have.
Mouse.hide();
pointer_mc.startDrag("true");
Mouse.hide();
pointer_mc.startDrag(true);
this.onMouseMove = function ()
if (_xmouse < 4 || _ymouse < 4 || _xmouse > Stage.width - 4 || _ymouse > Stage.height - 5)
pointer_mc._alpha = 0;
else
pointer_mc._alpha = 100;
} // end else if
whats the code that i have to give for the movie handpointer_mc to work when i rollover a buton to show mine,and not the browser one white.
thanks guys!

when a rollover occurs, assign pointer_mc's _visible property to false and your hand pointer's _visible property to true and start dragging your hand pointer.
when a rollout occurs, assign pointer_mc's _visible property to true, your hand pointer's _visible property to false and start dragging pointer_mc.

Similar Messages

FAQ: How do I make a hand cursor display on rollover or mouse over?

You can make a component in your application, for example a button or custom component, display a pointing finger cursor when a user's mouse rolls over it. Select the component, and in the Appearance section of the Properties panel, check Hand cursor.
Read the quick tip on FlashCats.

Hi there
Another approach is to use a Rollover Caption. Just remove any text and configure the caption as transparent. Then layer the Rollover area over the part where you want the hand to change to a cursor. The net effect will be that the cursor change will occur. Clicking will then result in triggering the underlying Submit button, which appers to be invisible and layered over an image.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Change My Hand Pointer on rollover a Buton?

Hi, i have 4 butones made on flash.,now i have a customize pointer also,that drugs on my movie,and now i want to do when i pass with my pointer on rollover at the butones,to change my hand pointer into the one that ihave made_
movie hand pointer.
wich are the actions that i have to give?
i have this code with as 3.0 until now.this code is only for my pointer mouse that i have.
Mouse.hide();
pointer_mc.startDrag("true");
Mouse.hide();
pointer_mc.startDrag(true);
this.onMouseMove = function ()
if (_xmouse < 4 || _ymouse < 4 || _xmouse > Stage.width - 4 || _ymouse > Stage.height - 5)
pointer_mc._alpha = 0;
else
pointer_mc._alpha = 100;
} // end else if
whats the code that i have to give for the movie handpointer_mc to work when i rollover a buton to show mine,and not the browser one white.
thanks guys!

That is AS2 code so you best post your question in the AS2 forum.

How do I get the little web browser hand to appear over my b

Hopefully this is an easy answer....
I have just uploaded my new website and noticed that when you
place the cursor over my image buttons that have "onClick - Open
Browser" behavior tags on them, the little web browser hand doesn't
show up. You know, the one that tells you something is a link? I'm
afraid people won't know that the images are buttons unless the
hand shows up. Any idea on how to make the hand appear? Any advice
would be great. Please keep in mind that I'm only a intermediate
level web designer. Here's my website:
http://vintagebycrystal.com/Pages/Holidays/Fourth%20of%20July/Main.html
Thanks!
-Crystal

Oh, heck. Sorry about that.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"E Michael Brandt" <[email protected]> wrote
in message
news:[email protected]...
> Jackeltree wrote:
>> Hmmm...I've downloaded the Divahtml web tools. But I
have no idea what
>> to do next. The help is not helpful and their
website is confusing...
>
> Jackeltree - I would love to hear from you off-group to
see how I can
> improve my site so it is clearer to you.
>
> I also need to point out that divaFreeTools will not
actually help the
> problem you have! Murray was referring to the Tool that
converts "#"
> links to the image url for you, but that is only if
there IS a link to
> start with. Since you applied the DW Open Browser Window
behavior to the
> IMAGE instead of to an <A> tag around the image,
there is NO link, hence
> the Tool can not help you.
>
> To get the hand cursor, you must move your onclick event
to an <a> tag. In
> DW versions EXCEPT CS3, you can simply select each image
in Design View,
> then click on the OpenBrWindow behavior in the Behavior
window, and then
> in the dropdown there, change the event from "onclick"
to "onclick <A>" or
> "(onclick)" depending on which DW you have.
>
> DWCS3 has a bug, so this will not work. You'll have to
remove the
> behavior by clicking the minus (-) icon in the behavior
window, then add a
> link to the image (the link itself can be "#" at this
point) using the
> Property Inspector, then select the <a> tag (on
the Tag Selector bar) that
> has been added for you and in the Behaviors Window add
the OpenBrWindow
> behavior to it.
>
> Then you can run my divaFreeTools script to convert the
link from "#" to
> the url to the fullsize image, which is a better link to
use.
>
> (<plug> An alternative is not to use the DW Open
Browser Window, which had
> to be added to each image one at a time, but instead,
after removing those
> behaviors from your images, create a link - using the
Property Inspector -
> to the fullsize image itself (rather than a link to "#"
or to
> "javascript:;". And then add my divaPOPgold (which does
cost a few $) to
> your page once. It will handle all the popup windows
automatically for
> you. </plug>)
>
> And again, please do contact me so I can improve the
help for
> divaFreeTools on my site. Contact me at michael at the
divahtml.com
> address.
>
> --
>
>
> E. Michael Brandt
>
> www.divahtml.com
>
www.divahtml.com/products/scripts_dreamweaver_extensions.php
> Standards-compliant scripts and Dreamweaver Extensions
>
> www.valleywebdesigns.com/vwd_Vdw.asp
> JustSo PictureWindow
> JustSo PhotoAlbum, et alia
>
> --

How can I click on a button and make a text box appear or disappear

How can I click on a button and make a text box appear or disappear?
Thanks ahead of time for your help,
Doug

Hi Denes,
I just thought that the example you pointed the OP to, is far more complex than what I understood he needs. The OP was talking about using a button, which I thought was a very basic and simple case. Your example is much more complicated. If memory serves, the radio group item, at the time (prior to 3.1 fieldset) behaved differently, so you needed to create a new value retrieving function, and then was the need to preserve the items show/hide status upon reloading the page. In short, I thought maybe I didn’t see the complexity in the OP post, but it seems that his requirement was indeed a simple one.
Regards,
Arie.

FLASH PLAYER 11.2.202 = NO HAND POINTER/CURSOR IN SAFARI

Flash Player 11.2 r202.233
Mac OS X 10.7.3 / Safari 5.1.5
Known issue: the mouse cursor does not change to hand pointer when mousing over TLF links like buttons and active clips (3060839).
Annoying one..
Is Adobe addressing this??

Could you please open a new bug on this over at bugbase.adobe.com? Please include a specific URL, a copy of your dxdiag report and any additional information you think might be relevant. After adding the bug, please post back with the bug URL so that others affected can add their votes.
In addition, could you try disabling hardware acceleration to see if that makes any impact?
How do I disable or enable hardware acceleration?
Thanks,
Chris

How do I make a hands free call with the iphone 4s?

How do I make a hands free call with the iphone 4s? I have a bluetooth car device and when I try to talk through it (as I did with my old phone) to call someone it does not work. so far only hte last person called is redialed.

That is a carrier-based service. So first you have to make sure your service contract includes that feature.
It usually also includes Call Hold. So you call the first party, put them on hold, call the second, then reactivate the first. But only if your carrier allows you to.

Is there a way to make the bookmarks panel appear only when bookmarks are actually present? As in, I

Is there a way to make the bookmarks panel appear only when bookmarks are actually present? As in, I'm looking for a global setting so that I don't always have to update the properties in each document.

AFAIK, no.

In the Full Featured LabVIEW example, what makes the entry point button reappear?

My question is this: What piece of LV code or invoke node for the TS engine makes the Entry Point button reappear when a sequence file is loaded?
Background:
I've inherited a modified version of the Full Featured LabVIEW UI, which has been moderately modified (Enough so that restarting isn't really an option, but it's still similar enough to use them as comparisons for behaviors). Also, this code was started in LV2012/TS2012, and I'm migrating to LV2013/TS2013, but this behavior was consistent in both versions.
Here's what I've tried:
I found that when the Connect Command executes (See attachment), the button, which is a TSUI.IButton control, is gets greyed out or hidden. In the unmodified example UI that's provided with TestStand, the button reappears when a sequence file is loaded. The problem is that when I load a sequence file in my code, and click on it ahead of running, the button does not reappear. In my code, I can run the sequence successfully by right clicking on the sequence file and selecting Run, so I don't believe the sequence has an error, nor the process model.
Thanks in advance,
Seth
Solved!
Go to Solution.
Attachments:
ConnectCommand.JPG ‏56 KB

Seth,
The "options" input of the ConnectCommand function controls this. On the Help page for this input, you can see that there are options for "ignore enable" and "ignore visible". Either of these could impact the functionality of the entry point button. You might try making the options for both buttons 0 and see if this resolves the issue. If not, please let us know.
Daniel E.
TestStand Product Support Engineer
National Instruments

It's simple... I want the Illustrator pen tool to ALWAYS make corner annchor points and NEVER smooth. Right now I have to convert every single one of them, or I have to do a work around every time I draw a line and make one of the handles disappear. Is

It's simple... I want the Illustrator pen tool to ALWAYS make corner annchor points and NEVER smooth. Right now I have to convert every single one of them, or I have to do a work around every time I draw a line and make one of the handles disappear. Is there some simple setting out there that will just "make it so?"@

The video I am watching this guy is just dragging every line to make curves. And every anchor point is a corner. He is not switching back and forth between the pen and the anchor points tool, and he is not using the convert points tool. He draws a curved line and starts another straight line only to curve it with a click and a drag. It is super efficient, and I could save a world of time if I could figure out what he is doing.

How to make an insertion point

Sorry I'm new here... I have tried searching and looked through the tutorials but how do you make an insertion point using CS5?

Can you elaborate?
Are you following a tutorial?
As a guess, you click anywhere on the web page (to make an insertion point) and then go to the next step.

How to make newly added columns appear In IR report

Hi.
I am using APEX 4.0.1. I've created an IR report and then, subsequently, needed to add several column sto the underlying SQL query.
When I save the changes, APEX tells me that it will add the new columns and that I need to run the IR report and either click "Reset" or use the Actions menu to make the new columns appear in the report. I did the latter and the new columns do appear just fine.
However, when I then tried to modify the column labels, I am unable to see these in the report "Attributes" section. And so, I can't access their labels.
How do I get the new columns to appear in the Attributes section of the iR report?
Thanks in advance for any help.
Elie

Hi, LittleFoot (sorry, I don't see your actual name).
Thanks very much for responding.
I've done exactly what you've described.
I added several new column sto the SQL query underlying the IR. I then re-ran the default Primary report, added the new columns via the Actions -> Select menus, and then saved the report.
When I then go into the IR Attributes page, the new columns are not there. I've closed/re-opened my browser. I don't know what the issue is.
I'm wondering ... would the fact that the underlying query is SELECTing from a view rather than a table make any difference? I wouldn't think it would.
Thank you for any help.
Elie

Hand Tool Appears and Have to Restart Computer - CS5

This problem has been going on for quite some time. I'll be working on a project and then out of nowhere the hand tool is activated and I'm no longer able to use any of the other tools. If I quit all the open Adobe programs and restart PS, the hand still appears. Only after I restart my computer, does PS work again. This is a reacuring problem that happens several times a day. I've noticed it happens when I'm zoomed in relatively close to the area I'm working in.
Help?

Hitting the H key or the space bar repeatedly, say six times in very quick succession, normally clears it up. In some cases it may take 10 or 12 times.
As to what triggers it, when CS3 and CS4 were current, there were some old versions of Microsoft Entourage that caused it when Entourage was open in the background. It was some strange interaction between the buggy version of Entourage and the OS (in my case it was Tiger). Subsequent updates to Entourage fixed it.
However, it's entirely possible that something else may be causing it in your case. I don't have CS5.
Wo Tai Lao Le
我太老了

How do I make a video clip appear smaller in Adobe Premiere 6.5?

Hello,
I am attempting to make a video clip appear smaller with a black background, the way movies often do when they show out takes at the end during the credits. I'm sure this is something pretty simple, but I can't seem to figure it out. Any assistance would be greatly appreciated!

Cannot recall the full line-up of Effects in Pr 6.5, but you should have the fixed Effect>Motion>Scale, which will allow you to resize the Clip. You might need to use Motion>Position in addition. Basically, you will doing a PiP (Picture in Picture), with no Clip below, just the black showing.
Good luck,
Hunt

I don't know much about iPads, but I was wondering if there is a way to make Siri hands free?

I don't know much about iPads, but I was wondering if there is a way to make Siri hands free? I am looking to use Siri with a student of mine and the student does not have use of their hands.

Go here and click on Account Management. Select a topic and you should be able to select Chat as an option for help.
https://getsupport.apple.com/Issues.action

Make a hand pointer appear on rollover a Buton?

Similar Messages

Maybe you are looking for