Change of Source client in transport request

Hi Gurus,
I want to change source client of transport request
Since I want to transport request between clients of same server.
I did it using scc1
But when I want to make any changes to form which was included in that request it is saying
Request/task DEVK***** has invalid source client XXX
I am trying this in YYY client
Please provide solution
Thanks in advance for your efforts

Yogesh,
Does both the clients allow development in the server? Generally it should not be the case.
Does the client still exists in the server?
Here is a thread with replies for such an error message.
Re: regarding Client change for transport request
Check it,it may give you some lead.
K.Kiran.

Similar Messages

  • Changing the source client of a transport request

    Hi!
    I transported few requests from client 300 to client 200 using transaction scc1.
    Now, i want to transport them to another client from 200. But when i try to release those requests the systems prompts "Request <#> (300) belongs to a different client".
    I tried changing the source by double clicking the request, but I'm unable to do so.
    Can u please suggest any way of changing the source client of these requests ?
    Thanks!!
    Regards,
    Muzammil.

    Hi,
    Goto SE01,
    The type transport number
    Display
    Place cursor on the TR
    Click Utilities=>Reorganize=>Change Project.
    Best regards,
    Prashant

  • Locationg source system object  transport request number in target system .

    Hi,
    After the object is pushed from source system to target using SCC1 for cross clients but same systems or STMS for cross-systems, if we want to see the object's source system's transport request number in the target system, how can we see that ?
    Regards,
    Rajesh.

    Hi Rajesh
    If my understanding is correct you want to know the source server in the target system( i.e where we have transported).
    For cross-system objects, as you know we use STMS to transport them...
    In the target system:
    1. SE10
    2. Click on Transports button.
    3. Select the required request and expand the node.
    4. You will have the first one which has log only for Export.
    The node with only Export log is the source system...
    Hope this helps...
    Kind Regards
    Eswar

  • Unable to collect the changed query elements to a transportable request

    Hi All,
    I had saved the query changes to dummy request, now I have to collect the changed qurey elements in a transportable request. This I am doing in the transport connection tab in rsa1. Now I want to collect only the changed elements of the query, & not all the elements. I have made (changes) restriction to a key figure inside the keyfigure collum. Now when I try to make a collection of this to a transport request - I am unable to find it under the query elements in the transport collection.
    Pls advice how to collect it in a transport request & move it?
    Thanks & Reagrds,
    Shreesh.

    Hi Shreesh,
             It may be collected under default request. You can collect changed objects by releasing default request.
    aftre releasing default request
    go transport connection(TX-RSOR) object type -
    >query elements -
    > Query--> collect your query.
    Grouping option as only necessary object
    then click on "Package"
    then check for your objects if not checked against your query elements(which you want to collect), plz check. at the same time check for your query name it should also be checked then only query will carry the changes.
    Hope this will help you.
    Thanks,
    Vijay.

  • Unable to capture the Data Source into a Transport Request

    Hi All,
    We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
    Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
    When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
    Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
    Regards,
    Sachin Dehey.

    Hi Sachin,
    Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
    What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
    Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
    In BW, datasources are not transported, only their replica is transported.
    Transportation of Datasource is done in R/3. Only their replica is transported in BW.
    So wht ever you have done till now is correct. So go ahead.
    While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
    Regards,
    Vishnu.

  • Re Run Client Export Transport Request

    Dear Experts,
    I was trying to do system refresh of Production data to quality. While executing the transport request in quality (STMS_IMPORT) quality server abruptly stopped. Now after starting the server I am checking the status of the "Client Export - Specific Object" Transport. It shows "Import Running". In import monitor the execution start is showing yesterdays date and status as running.
    How can I rerun the TR
    Ranjit Simon

    Hi Ranjit,
    You can check the import monitor and see if you can cancel the import request.
    Once this is done, check TRJOB and TRBAT tables.
    On OS level, if you can see abandoned tp processes, you can kill that.
    Regards

  • How to cancel changes that were made via transport request importing?

    Hi!
    Could you please tell me whether it is possible to cancel changes that were made via importing of transport request into the system?
    Thanks and Regards,
    Siarhei

    hi
    the programs maitains the versions ...just check the version managemet..
    regds

  • Settings required for including changes in data in a transport request.

    Hi All,
    I need the settings required for saving ths data changed in a database table into a customizing request.
    Kindly let me know the steps involved in the process.
    To elaborate:
    I have a maintenance screen for a DB table.
    Whenever a user creates/changes data to/from the DB table , using the maintenance screem, the data should be saved into a customizing TR.
    Regards-
    Harmeet Singh,

    Hi there,
    Any config change will be saved under a transport request TR. Also tables are of 2 types: Customizing table & application table.
    Changes / new entry in a customized table are transportable. You will gte a TR when the customized table values are changed / new entry.
    But application table entry / changes are non transportable. You willnot get a TR when saving the data.
    To know it, go to SE11 --> give the table name --> display --> attributes --> Delivery class. Delivery class A is application table, C is customizing table.
    Also some standard tables like MARA, VBAK are not allowed to maintain. If a table is allowed to be maintained, table maintaience allowed is checked in the above.
    Regards,
    Sivanand

  • Objects not changed after successful release of transport requests

    Hi All,
    We added  two free characteristics to a query and collected that query in a transport request in development.The request is released and imported successfully in quality.The problem we are facing now is that the two characteristics are not reflected in the query.But the hexadecimal numbers for the two characteristics are captured under the released transport request in Quality.
    Could someone please help me out in solving this issue.............
    Regards,
    Shravani

    Hi,
    Thanks for the prompt reply.We have collected it through transport connection only.As I have mentioned in the thread import is successful ,hexadecimal number is present under the transport request but the changes are not present in the query.Could it be the problem with importing?...................
    Regards,
    Shravani

  • Client and transport requests

    hi frnds,
    in the dev system we have two clients 900,500.
    now i want that the reqeuests which are seen in 900 clilent (se10)  should also be seen in 500.
    how is it possible.
    regards,
    bhupesh

    Hi,
    Are you looking for SCC1 (copying transports from one client to other  with or without release) ?
    And also it dependens on the purpose...
    Do you want it just once ..or every time you want to view these transports.
    Client copy  if it is for one time
    Or configure the Extended transport control for always the transports to move to that other client.
    And also check this thread it may be of help..
    Re: How automatic transportation between clients
    Thanks.

  • Transport request trying to import itself into non existing client.

    Hi,
    We are trying to import  one transport request ( Source client of transport request 101 )  but it trying to import itself into the client 135. This 135 client has been deleted long time back.
    I checked , there are no references in transport configuration to this client.
    Error we got during import:-client 135 does not exist. Choose another client.
    Can someone pl. let me know what could be the reason.
    Best Regards,
    Tushar.

    Hi Markus,
    We did not give target client while importing. We left it blank. But source client of transport request  is 001. But in log
    600 ( default login client )------> selection for import
    135                                 -
    > Selection for Import.
    600 is ok but why this 135 is selected for import. That is the problem.
    Best Regards,
    Tushar.

  • Regarding Client change for transport request

    In 46C system, How to change client for transport request?
    Before Upgrade, we have Trans Request-DEVK900002 for client XXX, and this client does not exists anymore. now How to delete this trans request or release it.
    one of the way i think is to change client for transport request and release it. Please share your suggestions.
    regards
    Jaichan

    Hi shlesa,
    Thanks for your reply.
    I tried now..it does not worked out.
    i created request at 000 using DDIC and then logged with 001 client using DDIC.
    then i executed SCC1, gave Source Client 000 and Request number and executed.
    i checked in SE09, was still the Request appeared with 000 client.
    Any other alternatives.
    Jaichan

  • How to change Client of a Transport Request?

    Hi friends,
    I am trying to Change the clien of a Transport Request in se01 but the field is disabled.. Is there any way to change the Client of a Transport Request?
    Pls Help me.
    Regards
    Venkatesh.S

    Why you want to change the client ?
    I assume, you are not talking about changing the traget system client but the client of the source system TR  ie for ex 100 or 120.
    If the Development Server has two clients say 100 (Configuration) and 120 (Development and Unit Test) then for configuration changes Functionals will get the TR created in 100 where as we developers get the TR created in 120.
    For Development,if you get a workbench TR in 100 client but trying to change the program in 120,then while saving the changes in the TR it will not let you save your changes because the TR is created in 100 but you are trying to use that TR to capture the changes that you are doing in 120.
    To my knowledge we can't get THIS client changed,instead we need to get a new TR in the client say 120 where the workbench changes are supposed to be done.
    K,Kiran

  • Mass collection of data sources in Transport request.

    Hi All,
    I want to capture the data sources which are available in RSA5. It is already activated and captured in Transport Request. But the Transport request was deleted by somebody.
    I want to re-capture the activation of data sources which are there in RSA5. I want to collect 90 data sources in one Transport request.
    Can you please guide me a easy way to capture all the data sources in transport request.
    Thanks.

    Hi,
    you might be able to create a new Transport request and add the datasources manually.
    check out the table roosource for the sources. you can find your's by filtering on tstpnm.
    add the sources with object 'R3TR' and subobject 'OSOA'.
    regards
    Siggi

  • I want to know how to change schedule on Transport Requests

    Hi.
    I want to know how to change schedule Transport Requests.
    And the Transport requests has already approved by Transport Proposals.
    Now I tried to change schedule after re-creat Transport Request,it is same
    Transport Request Number.
    But I can't change schedule.
    Please help me!
    Thanks.
    Toshi

    In full editor, Image>Resize>image size. Be sure to check "Resample Image & Constrain proportions".
    You can also do it with the crop tool. On the tool's option bar, enter the resolution in the appropriate box.

Maybe you are looking for