Settings required for including changes in data in a transport request.

Hi All,
I need the settings required for saving ths data changed in a database table into a customizing request.
Kindly let me know the steps involved in the process.
To elaborate:
I have a maintenance screen for a DB table.
Whenever a user creates/changes data to/from the DB table , using the maintenance screem, the data should be saved into a customizing TR.
Regards-
Harmeet Singh,

Hi there,
Any config change will be saved under a transport request TR. Also tables are of 2 types: Customizing table & application table.
Changes / new entry in a customized table are transportable. You will gte a TR when the customized table values are changed / new entry.
But application table entry / changes are non transportable. You willnot get a TR when saving the data.
To know it, go to SE11 --> give the table name --> display --> attributes --> Delivery class. Delivery class A is application table, C is customizing table.
Also some standard tables like MARA, VBAK are not allowed to maintain. If a table is allowed to be maintained, table maintaience allowed is checked in the above.
Regards,
Sivanand

Similar Messages

Customization settings required for Extenal service managment

Hi,
Till now we are not using External managment , now we want to confifure this , so what are the settings required for this.
regards,
zafar

Hi,
1. If you are selling the Service , Use Material Type u201CDIENu201D and for billing with SD module ,u have to use MM with HR module like (Time & Material ) ie..Expense recording (PR05) then PRRW and PRFI.
2 .If vendors provide service for you and you can procure the service and pay to vendor.
The configuration required are:
2.1. Define organization status for service category
SPRO u2013>MM-> ESM->Service master- >Define organization status for service category
2.2. Define Number Ranges
SPRO u2013>MM-> ESM->Service master- >.Define Number Ranges
2.3. Define Service Category
SPRO u2013>MM-> ESM->Service master- > Define Service Category
& you can do assignment of cost object ( cost center, project, sales order) with co.code with G/L account in OKB9 t.code and in t.code OBYC account assignment of GBB,WRX with G/L.
***After above you can create Master data as Service master AC03
& the transactions are
A. Create PO ME21N (Acc,assment cat. K or P or C as required and item category D) and enter other detail with service master.
B. Create SES w.r.t. PO in ML81N
C. MIRO w.r.t. SES
D. Payment to vendor in F-53
For more Check the link:
http://sapmm.wordpress.com/category/esm/
Regards,
Biju K

Hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!

hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!please help!

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

What are the settings required for QM in procurement

Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
Thanks

Hi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM

What customization settings required for automatic availably check,

Dear Guru's
While doing Sales order my availability check should be carried out, but it is not happening automatically, what settings required for the automatic availably check. Pleasantly we are doing it manually.
Regards,
Kalyan

Hi Kalyan,
ATP check requires following configuration setting.
1) The availability check is indecator needs to be switched on at requirement class lavel.
2) The availability check is indecator needs to be switched on at schedule line lavel.
3) Set availability check 02/ 01(individual / daily requirement) in Sales Genral plant view of Material master.
4) Set the checking group in the MRP3 view of Material master.
5) Above all a plant must be assigned to the line item in the sales order.
Please do let me know if you have any concern.
Thanks,
Rupak.

Mass collection of data sources in Transport request.

Hi All,
I want to capture the data sources which are available in RSA5. It is already activated and captured in Transport Request. But the Transport request was deleted by somebody.
I want to re-capture the activation of data sources which are there in RSA5. I want to collect 90 data sources in one Transport request.
Can you please guide me a easy way to capture all the data sources in transport request.
Thanks.

Hi,
you might be able to create a new Transport request and add the datasources manually.
check out the table roosource for the sources. you can find your's by filtering on tstpnm.
add the sources with object 'R3TR' and subobject 'OSOA'.
regards
Siggi

Unable to collect the changed query elements to a transportable request

Hi All,
I had saved the query changes to dummy request, now I have to collect the changed qurey elements in a transportable request. This I am doing in the transport connection tab in rsa1. Now I want to collect only the changed elements of the query, & not all the elements. I have made (changes) restriction to a key figure inside the keyfigure collum. Now when I try to make a collection of this to a transport request - I am unable to find it under the query elements in the transport collection.
Pls advice how to collect it in a transport request & move it?
Thanks & Reagrds,
Shreesh.

Hi Shreesh,
It may be collected under default request. You can collect changed objects by releasing default request.
aftre releasing default request
go transport connection(TX-RSOR) object type -
>query elements -
> Query--> collect your query.
Grouping option as only necessary object
then click on "Package"
then check for your objects if not checked against your query elements(which you want to collect), plz check. at the same time check for your query name it should also be checked then only query will carry the changes.
Hope this will help you.
Thanks,
Vijay.

BW settings required when we change the host name in R/3

Hi All,
we had a test system in R/3 and we are planning to change the Host name in R/3 and this is connected to bw test.after basis change the host name in r/3 test what are settings required to be done in BI .
Regards,
jasmine.

after name change check the RFC connection in SM59 and then see if you data sources are anabled from new source system.

Prerequisites and requirements for a change of Fiscal Year in BW?

Hello:
We are planning for a change in Fiscal year. Our current Fiscal year starts from Apr 2010 - Mar 2011. But the change will be or should be done in Feb 2011 which means the new Fiscal year will start in Feb 2011.
What are the implications for this change? What prerequisites and other requirements should be taken into account.
It would be a great help if you could give me a procedure for achieving the above.
Thanks in Advance.

Once you transfer global settings from source system, I hope BI should work fine.
Chk the point 1 about global settings and related tables listed in below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30422873-8369-2d10-ddb5-e516359259f1?quicklink=index&overridelayout=true
Hope this helps you.
Regards,
Vinay

Initial settings required for Made to Stock -10 strategy.

Dear Frndz,
Kindly help me with the step by step procedure to do the initial (SPRO) settings required in SAP PP to carryout the Made to Stock -10 strategy in the system.
Regards,
Srini

Hi,
For MTS, maintaining the Planning Starategy 10 in Mtrial MAster is the Only thing we need to do.
System by default will do the rest of the things for you.
In MD61, system will propose Requirements Type LSF.
Sales Order will be for Inforamtion Purpose.
PIR will be reduced after PGI to the SO.
If you require any specific thing pl. inform.
Regards,
Siva

Function module required for BOM Changes

Dear SAP Guru
I need the function module which gives me the details of changes done in the BOM.
Scenario: Need to develop the report which gives only the details of BOM changed on the given date. The BOM level might vary.
Regards
Rahul

Dear
I think you should have ECM in place to have tracability for any changes carried out in BOM .
Refer earlier posting : Re: ECM ECR
If the ECM is in place , then you can see what changes has been done in CC02/03 Environmnet - > Reporting -> Bill of Material.
Otherwise please try the following Functinal Module : You can also try CEWB and CS80
1. CSAP_BOM_ITEM_MAINTAIN
2.CS_BOM_EXPL_MAT_V2
3.CHANGEDOCUMENT_READ and CDHDR
Refer : http://help.sap.com/saphelp_40b/helpdata/en/92/58b521417011d189ec0000e81ddfac/content.htm
Regards
JH

BAPI Function for EG70 change rate data

I am searching a BAPI function which can perform the function of EG70 (change rate data), ie, update the RateType and Fact Group is each register under an installation and device.
Can anybody helps? Thanks very much and point must be rewarded.

Hi,
ISU_DB_EASTL_RATETYPE_SELECT - Use this for selecting rate type & fact group.
ISU_DB_EASTL_UPDATE -Use this to update rate type & fact grp at device level
ISU_DB_EASTS_RATETYPE_SELECT - Use this for selecting rate type & fact group at register level.
ISU_DB_EASTS_UPDATE-use this to update rate type & fact grp at register level.
Two tables are updated by EG70 EASTS & EASTS,you can search any FM from SE37 by ISUEAST
Hope this helps.

HR data input creates transport request dialog

Hello
I am trying to configure some basic HR functionality on my system (PA, OM) for a couple of infotypes. Every time I enter or change master data for an employee on my development server, a dialog appears for me to input a transport request number as if I am making a new program or changing tables in a system. Also in a production system when i do this a message appears that client is not modyfiable and when i confirm, data gets saved normally.
How can i disable these dialogs? I know this is more of a development / instalation question but i hope someone understands my problem here.

Hi,
Ask you Basis person to disable these prompts. Basis people will set these transport requests, authorizations to modify, view etc.
Regards,
Suhasini

Change of Source client in transport request

Hi Gurus,
I want to change source client of transport request
Since I want to transport request between clients of same server.
I did it using scc1
But when I want to make any changes to form which was included in that request it is saying
Request/task DEVK***** has invalid source client XXX
I am trying this in YYY client
Please provide solution
Thanks in advance for your efforts

Yogesh,
Does both the clients allow development in the server? Generally it should not be the case.
Does the client still exists in the server?
Here is a thread with replies for such an error message.
Re: regarding Client change for transport request
Check it,it may give you some lead.
K.Kiran.

Log for Addition/Deletion of object in a Transport Request

Dear Friends,
Recently I had a issue where I tried deleting an object from a transport request and I got the message that object is deleted successfully.
But when the transport was imported then it failed with Sy-subrc 8 because of the same object in transport. The reason for the same could be :
1.) Either the object was not deleted from the transport request.
2.) Or Some one else added the same object again in the request.
I want to read the log of this transport in such a way that I see when a object has been added/deleted from a transport request along with SAP User ID of the person doing it.
Is this possible ? If so kindly share the steps with me.
Thanks a Lot for your kind help!!! This is very important for me....
Regards,
Lalit

Hello Lalit
I hope nothing of that sort is available as the transport requests will again have tasks under them.
The changes done to the task will have to be tracked in that case but SAP doesn't have that task change logging as far as I know.
All E0* tables relates to transports and objects under these transports none of them have logs on this nor even any transactions which allow user to edit the transport object.
You get an action log which provides who created it and who releaed them.
But if you configure CharM on Solution manager I hope you can track each changes.
Regards
Vivek

Settings required for including changes in data in a transport request.

Similar Messages

Maybe you are looking for