Change Open With for all files with a specific extension

Hi, I've been using OS X for quite some time, but more recently cannot see how you do the following which is proving frustrating:
* Open Get Info for a file,
* Use the drop down under Open With to choose Other,
* Select an appropriate application that wasn't on the drop down list (in this case Smultron text editor for CSV files),
* Press the Change All button and the drop down turns back to Excel which was the previous default.
So basically, how do I change all files with CSV extension to Smultron when Smultron wasn't in the list of Open With items and I have to use Other from the list. This is repeatable for any file type with any application that isn't listed and is on both my iMac and my work's MacBook. Try it yourself and you'll see what I mean!!
Thanks

Stuart Mchattie wrote:
Thanks NeroWolf,
Your solution does work for that single file, but doesn't change the system wide association of that file extension with a particular application. It is because this works that I believe the problem I am having is uncircumventable and is in fact a bug in the OS. Could anyone else confirm this?
Cheers,
Stuart
It might be a bug. What I found is that the icon does not change unless I log out/in or reboot, even when the app normally puts an icon on the file.
For example if I change an audio file to always open with VLC, it does even though the icon remains as before. However, even though clicking plays the audio with VLC, if I right click the file and select "Open With" it still says iTunes (app) default which is incorrect.
Message was edited by: nerowolfe

Similar Messages

How to set a default open with, for all files

I would simply like to make all my .avi files to open with VLC, rather than Quicktime. I have done the "change default open with", but it's only for that file.
Any way to make all avi's open with VLC?
Thanks!

Right-click any .AVI file and select Get Info. Under the "Open with" section, select the app you want, and then press the "Change All" button.

How do you open Garageband for iPad files with Garageband?

I was led to believe that Garageband could open up Garageband For iPad files, but not vice versa.
However when a friend sent me his Garageband For iPad file, and I tried to open it, a "compatibility updater" started running then stopped halfway through and told me Garageband was "unable to complete the download" and directed me to go to Apple help.
Here I am.
Anybody got any idea how to open (and work on) this file?
Tank you in advance.
-Dave-id

Apparently there were a two updaters I had to run first, before letting the compatability updater do it's thing.
And since I got my Garageband for Mac through the APP store I could only do my updating through that.
So if anyone else is having that same problem, update, update, update!

When i open my Canon RAW-files with preview or transfer them to another program using preview they change to color despite the fact that they where all shot in B/W... How to change this?

When i open my Canon RAW-files with preview or transfer them to another program using preview they change to color despite the fact that they where all shot in B/W... How to change this?

I shoot only RAW - no JPEG-files except those visualizing the files on my memorycard or computer. I think i have to refine my question;
1. I know there is possible to make B/W HDR-images.
2. I know the best HDR images are based on RAW-files.
3. When i transfer the images in question to a HDR software they change, so when i view them in the software (either Preview or the HDR software) they are suddenly viewed (and processed) in color.
4. This never happend on my PC so i know it has to do with either Finder or Preview.
5. Do i have to make all my B/W HDR-images on the PC or is it a way for me to change how Finder/Preview show/alter my images?

How do I make ALL files with RTF extension open in Nisus Writer?

How do I make ALL files with RTF extension open in Nisus Writer? Right now it opens in Text Edit. I don't want to change it for one file. I want all files, regardless of how many or where they are.

select a .rtf file in finder and enter command+i. in the resulting popup go to the "open with" section and change the app to open it to Nisus Writer and click "Change All".

"Date Modified" for all files being changed if "Automatically write to XMP" is on

Recently upgraded from LR3 (v3.4.1) from LR2 on OSX 10.6.8 and have always had Catalog Settings > Automatically write changes into XMP turned on.
When browsing existing JPG files in my Library (no Develop changes, no keywording, no Presets, no Import), LR3 is writing to disk — i.e., when I look at files in Finder, almost every viewed file’s “Date Modified” is being set to today’s date and time. (It actually creates a .swp file, then changes it's name back to .jpg)
This is really bad, as it's making it impossible for me to use Finder to figure out when I last worked with a file, it is triggering needless Time Machine and Backblaze backups, and unnecessarily churning my disk.
If I turn off "Automatically write..." this behavior stops. Per David Marx at thelightroomlab.com, I tried turning off this preference, manually doing a "Save Metadata to File" for all files, letting that complete, then turning the preference back on. This does not solve the problem.
Per a suggestion at photoshop.com, I used ExifTool to see what changes LR was writing to a sample file; from the diff below, you can see that LR is adding a bunch of new fields as well as moving other fields around. But my point is that LR3 should never overwrite a file on disk if all I am doing is browsing thru them.
Is anyone else seeing this? Any ideas would be greatly appreciated!
-- David
diff Exif5609_original Exif5609_update
2c2
< FileName: DSC_5609_original.JPG
> FileName: DSC_5609_update.JPG
5,6c5,6
< FileModifyDate: 2009:11:27 21:32:54-08:00
< FilePermissions: rwxr-xr-x
> FileModifyDate: 2011:08:07 22:06:47-07:00
> FilePermissions: rw-r--r--
27a28,29
> ShutterSpeedValue: 1/200
> ApertureValue: 7.1
55d56
< SerialNumber: 3209521
75d75
< Lens: 18-200mm f/3.5-5.6
185,188d184
< UserComment:
< SubSecTime: 00
< SubSecTimeOriginal: 00
< SubSecTimeDigitized: 00
211a208,299
> XMPToolkit: Adobe XMP Core 5.2-c004 1.136881, 2010/06/10-18:11:35
> CreatorTool: Ver.1.00
> MetadataDate: 2011:08:07 22:06:47-07:00
> SerialNumber: 3209521
> LensInfo: 18-200mm f/3.5-5.6
> Lens: 18.0-200.0 mm f/3.5-5.6
> ImageNumber: 26634
> RawFileName: DSC_5609.JPG
> SavedSettingsName: Import
> SavedSettingsType: Snapshot
> SavedSettingsParametersVersion: 6.4.1
> SavedSettingsParametersProcessVersion: 5.0
> SavedSettingsParametersWhiteBalance: As Shot
> SavedSettingsParametersIncrementalTemperature: 0
> SavedSettingsParametersIncrementalTint: 0
> SavedSettingsParametersExposure: 0.00
> SavedSettingsParametersShadows: 0
> SavedSettingsParametersBrightness: 0
> SavedSettingsParametersContrast: 0
> SavedSettingsParametersSaturation: 0
> SavedSettingsParametersSharpness: 0
> SavedSettingsParametersLuminanceSmoothing: 0
> SavedSettingsParametersColorNoiseReduction: 0
> SavedSettingsParametersChromaticAberrationR: 0
> SavedSettingsParametersChromaticAberrationB: 0
> SavedSettingsParametersVignetteAmount: 0
> SavedSettingsParametersShadowTint: 0
> SavedSettingsParametersRedHue: 0
> SavedSettingsParametersRedSaturation: 0
> SavedSettingsParametersGreenHue: 0
> SavedSettingsParametersGreenSaturation: 0
> SavedSettingsParametersBlueHue: 0
> SavedSettingsParametersBlueSaturation: 0
> SavedSettingsParametersFillLight: 0
> SavedSettingsParametersVibrance: 0
> SavedSettingsParametersHighlightRecovery: 0
> SavedSettingsParametersClarity: 0
> SavedSettingsParametersDefringe: 0
> SavedSettingsParametersHueAdjustmentRed: 0
> SavedSettingsParametersHueAdjustmentOrange: 0
> SavedSettingsParametersHueAdjustmentYellow: 0
> SavedSettingsParametersHueAdjustmentGreen: 0
> SavedSettingsParametersHueAdjustmentAqua: 0
> SavedSettingsParametersHueAdjustmentBlue: 0
> SavedSettingsParametersHueAdjustmentPurple: 0
> SavedSettingsParametersHueAdjustmentMagenta: 0
> SavedSettingsParametersSaturationAdjustmentRed: 0
> SavedSettingsParametersSaturationAdjustmentOrange: 0
> SavedSettingsParametersSaturationAdjustmentYellow: 0
> SavedSettingsParametersSaturationAdjustmentGreen: 0
> SavedSettingsParametersSaturationAdjustmentAqua: 0
> SavedSettingsParametersSaturationAdjustmentBlue: 0
> SavedSettingsParametersSaturationAdjustmentPurple: 0
> SavedSettingsParametersSaturationAdjustmentMagenta: 0
> SavedSettingsParametersLuminanceAdjustmentRed: 0
> SavedSettingsParametersLuminanceAdjustmentOrange: 0
> SavedSettingsParametersLuminanceAdjustmentYellow: 0
> SavedSettingsParametersLuminanceAdjustmentGreen: 0
> SavedSettingsParametersLuminanceAdjustmentAqua: 0
> SavedSettingsParametersLuminanceAdjustmentBlue: 0
> SavedSettingsParametersLuminanceAdjustmentPurple: 0
> SavedSettingsParametersLuminanceAdjustmentMagenta: 0
> SavedSettingsParametersSplitToningShadowHue: 0
> SavedSettingsParametersSplitToningShadowSaturation: 0
> SavedSettingsParametersSplitToningHighlightHue: 0
> SavedSettingsParametersSplitToningHighlightSaturation: 0
> SavedSettingsParametersSplitToningBalance: 0
> SavedSettingsParametersParametricShadows: 0
> SavedSettingsParametersParametricDarks: 0
> SavedSettingsParametersParametricLights: 0
> SavedSettingsParametersParametricHighlights: 0
> SavedSettingsParametersParametricShadowSplit: 25
> SavedSettingsParametersParametricMidtoneSplit: 50
> SavedSettingsParametersParametricHighlightSplit: 75
> SavedSettingsParametersSharpenRadius: +1.0
> SavedSettingsParametersSharpenDetail: 25
> SavedSettingsParametersSharpenEdgeMasking: 0
> SavedSettingsParametersPostCropVignetteAmount: 0
> SavedSettingsParametersGrainAmount: 0
> SavedSettingsParametersLensProfileEnable: 0
> SavedSettingsParametersLensManualDistortionAmount: 0
> SavedSettingsParametersPerspectiveVertical: 0
> SavedSettingsParametersPerspectiveHorizontal: 0
> SavedSettingsParametersPerspectiveRotate: 0.0
> SavedSettingsParametersPerspectiveScale: 100
> SavedSettingsParametersConvertToGrayscale: False
> SavedSettingsParametersToneCurveName: Linear
> SavedSettingsParametersCameraProfile: Embedded
> SavedSettingsParametersCameraProfileDigest: D6AF5AEA62557FCE88BC099788BBD3CC
> SavedSettingsParametersLensProfileSetup: LensDefaults
> SavedSettingsParametersToneCurve: 0, 0, 255, 255
> IPTCDigest: d41d8cd98f00b204e9800998ecf8427e
228,230d315
< SubSecCreateDate: 2009:11:27 21:32:54.00
< SubSecDateTimeOriginal: 2009:11:27 21:32:54.00
< SubSecModifyDate: 2009:11:27 21:32:54.00
http://feedback.photoshop.com/photoshop_family/topics/lr3_date_modified_for_all_files_bein g_updated_when_browsing_photos_if_catalog_settings_automatically_write_changes_into_xmp_is /replies/6313647

clvrmnky wrote:
davidpope007 wrote:
Then when LR3 loaded my old LR2 images into memory, it "dirtied" the in-memory copy of the file by adding in these new LR3 XMP fields. Then, because I had "Automatically write XMP" on, it said "I better write these changes to disk".
Yuck. As a former software engineer, this is very bad software engineering.
It should wait until the user dirties the file (via Develop, keywords, etc.) before presuming to add a bunch of metadata fields that are unique to the new version of LR3.
Well, I'm a current software developer, and this is, really, a perfectly reasonable thing to do. It is a reasonable trade-off for a convenient feature required by a small subset of users.
Yes, in most cases the in-memory copy should "never" be dirtied unless the user makes a gesture of some sort, but like I said earlier, this option (once set by the user) sets up the situation where this gesture becomes implicit. This is a clear trade-off for the sake of convenience. And if the XMP is out of date and needs to be updated en masse, so be it.
The fact is, there is no easy way around this. Do we save up /every/ dirty buffer somehow until you make a gesture that /might/ require the XMP to be up-to-date before acting on that gesture? Now we have to worry about unflushed buffers if something goes wrong and the app exits. Do we save the buffers to the DB? Now we have to block some calls to make another blocking call to flush some or all of those to DB, and then write some or all of it out to one or more files. In what order? What if there is a gesture to have X files with up-to-date XMP and some or all of those are in unflushed buffers, unflushed DB writes or we have to wait for the DB.
As you can see, this is a transactionality nightmare, and the easiest and safest thing to get what the user wants (i.e., up-to-date XMP for the purpose of talking to a third-party XMP aware app) is to simply update the sidecar or XMP block in an atomic manner using the correct file IO. The file will have to change at some point, so it may as well be now.
[Thanks to both of you for your detailed replies. I am aware of the need for tradeoffs so when you say the approach taken is quite reasonable, I do believe you. I also apologize in advance for the length of the following and am extremely aware of the time it must have taken you to compose the above replies, but I'm going to add a bit more, if only for my own piece of mind and in hopes of coming up with a solution for my workflow.]
From my naive point of view, I was expecting the answer to be simply "don't raise the XMPDirtyFlag upon reading in a file". Obviously if your architecture requires you to "upgrade to latest XMP format" upon read, and another part of the system auto-detects "out of date XMP", then it's going to write those changes to disk.
But it didn't need to be designed that way. LR obviously has mechanisms to know when a user has made a change to XMP so it is able to write XMP changes to disk only when necessary.
The promise (to me) of "Automatically Write XMP changes to disk" was to auto-save my changes, and not those made for any internal (i.e., XMP versioning related) changes.
Perhaps the premise is that it is LR3's job to update an individual file's XMP to the latest version so that other XMP-aware apps can make use of it? I would argue that those third-party XMP-aware apps already have to know how to deal with all prior versions of XMP, so LR3 should just leave well enough alone.
You asked if my problem with your approach was that it was "inelegant"; not at all, it is based on my own perception of what I need from my workflow, so let me describe that so maybe we can find a better way:
* Part of the appeal of LR to me is that it preserves my original file as it came off the memory card, allowing me to move to a different workflow/toolset in 2025 if I choose to do so
* However, with all of changes contained in a single database file, I'm concerned about rare (but possible) corruption, so to mitigate this risk, I let LR backup my database weekly and it's also backed up continuously in the cloud via Backblaze
* Even with backups of the database, there is still a chance that I could lose changes made to individual files (e.g., LR corrupts the DB and I have to go back to last week's DB)
* Thus the appeal of the "auto-write to XMP" flag -- that way critical changes (develop, crop, keywords) are saved on a per-file basis; I liked the "automatic" part of this (as opposed to a manual save) because then I don't have to teach others in my family how to manually save XMP changes
* A nice side-effect of this setting is now when I use Finder to find a file and double-click on it to edit it in Photoshop, all my develop changes are right there; (in other words, I like the flexibility of not having to fire up LR in order to just invoke PS from within it); also when I use Bridge I see all the keywords there
* So with LR2, I had gotten used to what I thought was the best of all worlds -- autosave of changes at the file level via XMP + raw negatives untouched (i.e., Date Modified == the date I took the picture); this allows me to use operating-system-level tools -- Finder -- to locate/search for files
* Now I upgrade to LR3 and I'm finally now understanding that a concept "XMP versioning" is going to result in changes to many, but not all my files. (That's something else that's annoying about this issue -- I open up the Grid and browse a folder of files, and only seemingly random ones I've cursored over seem to get written to disk -- if it's so urgent that LR3 update the XMP, then it should do it for all the files in the catalog or at least in that directory)
Here's a screenshot from Finder of what I see everytime I look at this folder:
* So now I have to assume that each new version of XMP and/or LR is going to touch my files on disk. Sigh.
* What I don't like about this is that it is ruining the promise of "untouched raw negative". Yes, the image data is untouched -- which I agree is most of the benefit; but the file has been touched.
* Perhaps you might empathize a bit more if you imagined that someone went thru all your source code or Word files and randomly changed the date to "today" because you upgraded compilers or moved to Word 2011.
I agree all of this would be solved by having an XMP sidecar file for JPGs, but you indicate that's not going to happen.
You've also alluded to the solution of "resetting the Date Modifed" to it's original value -- which I believe is what Finder does when you move or copy a file -- but that that is fraught with issues as well. I believe you when you say there are issues, but again the naive part of me wonders why that soultion would be so bad...
I just thought of another potential solution -- turning on Date Created in Finder -- but it turns out that's changed, too.
I am really at a loss as to what to do and would welcome your suggestions.
Thanks again and kind regards,
-- David

IPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution

iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?

Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT

Opening Premiere Pro CS6 Files with Premiere Pro CS 4

I am wondering how it may be possible to open PP CS 6 files with CS 4. There was an earlier listing to modify some code to change Version "25" to Version "24" for v5.5. What would the number be for Version 4, if that is the
solution, or is there another method. Thanks.

I think its a no show.
CS4 is way different from CS6. For starters CS4 is 32 bits.

Impossible to change the Fontsize for a Radiogroup(with Submit).

Impossible to change the Fontsize for a Radiogroup(with Submit).
I have a Menue displayed from a Query like (select menue_title, id from lov_tabel)
and displayed in a Report Region as a Radio group with Submit.
The problem is, i've not been able to change the font size.
What i' have tried.
- Change the color works if i change "+Page Item"-> Element -> HTML Table Celle Attributes+ to
style="font-size:1.2em; color:#CC00CC" I see the new color but NO change in font-size.
- If change in Application-> Shared Components-> Templates
copy the Template "Reports Region" to "MenueReport",
then change on "MenueReport"->Template
value to      <table class="t6ReportsRegion" id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES# summary=""
     *style="font-size:1.2em; color:#CC00CC; font-family:Verdana"*>
     <tr><td class="t6Header">#TITLE#</td></tr>
     <tr><td class="t6ButtonHolder">#CLOSE#   #PREVIOUS##NEXT##DELETE##EDIT##CHANGE##CREATE##CREATE2##EXPAND##COPY##HELP#</td></tr>
     <tr><td class="t6Body">#BODY#</td></tr>
     </table>     option style="font-size:1.2em; color:#CC00CC; font-family:Verdana" inserted
     and then change in the template for the report region the Option
     Edit Region->User Interface -> Template to "MenueReport".
     I see a new color but NO font-size will be changed!
- I have changed the query to     SELECT ' <font size="4">' || rt_name as x, rt_nr FROM report_types order by rt_nr     But there is NO change of font size, and the Tag <font size= .. is deprecated.
Used Version is Apex apex_030200 with Firefox 3.5.5 Windows.
After all this failed attempts, i have no idea how to change the font for page to a larger size.
Can anyone help me and explain how to change the font size in Apex for a Radiogroupe?
Thanks in advanced
Dieter

Assign a [static region ID|http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/ui.htm#sthref1438] to the region containing the radiogroup.
Place the following code in the HTML Header page property, replacing static-region-id with the ID given to the region:
<style type="text/css">
#static-region-id label {
font-size:1.2em;
</style>after that how do we need to call this css
and does it need to be called within the Region HTML table cell attributes of a region or in the HTML Form Element Attributes of the radio group items
>
CSS isn't "called". Learn how [themes, templates|http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/themes.htm#CJABAEIE] and CSS are used to control the appearance of APEX applications.

Search for a file with part of a filename in a given folder.

How can I search for a file with part of a filename in a given folder?
Or can I change the columns in Advanced Search so that the heading is filename?

thanks, Michel. it had occurred to me to put a scratch tag on the folder, but I was hoping for an easier way. in future I'll do as you suggest though, because it's easier than what I have been doing.
daryl

Open a saved video file with imovie

Can I open a video saved file with imovie?

And how do you know that it is a PDF file if its extension is not .pdf? And there is a special subforum for the Android version of Reader:
http://forums.adobe.com/community/adobe_reader_forums/android?view=discussions

For All Entries with two tables

Hi All,
         Can we use FOR ALL ENTRIES with two tables. for example
SELECT * FROM MKPF INTO TABLE T_MKPF
         WHERE BUDAT IN S_BUDAT.
SELECT * FROM MARA INTO TABLE T_MARA
         WHERE MTART IN S_MTART AND
                        MAKTL IN S_MAKTL.
SELECT * FROM MSEG INTO TABLE T_MSEG
       FOR ALL ENTRIES IN "T_MKPF AND T_MARA"
              WHERE MBLNR EQ T_MKPF-MBLNR AND
                             MATNR EQ T_MARA-MATNR.
can we do it like this or any other way to do this plz tell. I waitting for your responce.
Thanks
Jitendra

Hi,
u cannot do like this....chek some documentation on it..
1. duplicate rows are automatically removed
2. if the itab used in the clause is empty , all the rows in the source table will be selected .
3. performance degradation when using the clause on big tables.
Say for example you have the following abap code:
Select * from mara
For all entries in itab
Where matnr = itab-matnr.
If the actual source of the material list (represented here by itab) is actually another database table, like:
select matnr from mseg
into corresponding fields of table itab
where .
Then you could have used one sql statement that joins both tables.
Select t1.*
From mara t1, mseg t2
Where t1.matnr = t2.matnr
And T2..
So what are the drawbacks of using the "for all entires" instead of a join ?
At run time , in order to fulfill the "for all entries " request, the abap engine will generate several sql statements (for detailed information on this refer to note 48230). Regardless of which method the engine uses (union all, "or" or "in" predicates) If the itab is bigger then a few records, the abap engine will break the itab into parts, and rerun an sql statement several times in a loop. This rerun of the same sql statement , each time with different host values, is a source of resource waste because it may lead to re-reading of data pages.
returing to the above example , lets say that our itab contains 500 records and that the abap engine will be forced to run the following sql statement 50 times with a list of 10 values each time.
Select * from mara
Where matnr in ( ...)
Db2 will be able to perform this sql statement cheaply all 50 times, using one of sap standard indexes that contain the matnr column. But in actuality, if you consider the wider picture (all 50 executions of the statement), you will see that some of the data pages, especially the root and middle-tire index pages have been re-read each execution.
Even though db2 has mechanisms like buffer pools and sequential detection to try to minimize the i/o cost of such cases, those mechanisms can only minimize the actual i/o operations , not the cpu cost of re-reading them once they are in memory. Had you coded the join, db2 would have known that you actually need 500 rows from mara, it would have been able to use other access methods, and potentially consume less getpages i/o and cpu.
In other words , when you use the "for all entries " clause instead of coding a join , you are depriving the database of important information needed to select the best access path for your application. Moreover, you are depriving your DBA of the same vital information. When the DBA monitors & tunes the system, he (or she) is less likely to recognize this kind of resource waste. The DBA will see a simple statement that uses an index , he is less likely to realize that this statement is executed in a loop unnecessarily.
Beore using the "for all entries" clause and to evaluate the use of database views as a means to:
a. simplify sql
b. simplify abap code
c. get around open sql limitations.
check the links
http://www.thespot4sap.com/articles/SAPABAPPerformanceTuning_ForAllEntries.asp
The specified item was not found.
Regards,
Nagaraj

Replacing a inner join with for all entries

Hi Team,
   In a already developed program I am replacing a inner join with select query follow up with for-all-entris and passing the data to final internal table but in both the case the result should be same then only my replacement will be correct. But my no records in both cases differs. This happening because when i am selecting data from first data base table is 32 lines. then I am doing fo-all-entries moving all the duplicate entries then the no records are four. but in final internal table i am looping the first internal table. So in final internal table the no of records are 32. But in inner join query the records are 16.So please let me know how resolve this issue?
Thanks and REgards
Deepa

Hi Thomas,
Thanks for ur suggestion.
The solved that in below.
In select query I did not change anything The way I had written the code was correct.
I think many of us know how to write that how to make the performance better in that way.
I made the change when I transfered the to final internal table.
The original Inner join code:
select a~field1 a~field2 a~field3 b~field2 b~field3 b~field4
           from dbtab1 as a inner join dbtab2 as b
          on a~field1 = b~field1 into it_final where
          a~field1 in s_field1. [Field1 in both the table are key field]
Before code:
Sort itab1 by key-fields.
sort itab2 by keyfields.
loop at itab1 into wa1.
move: wa1-field1 to wa_final-field1,
           wa1-field2 to wa_final-field2,
           wa1-field3 to wa_final-field3.
read table itab2 into wa2 witk key field1 = wa1-field1 binary search.
if sy-subrc = 0.
move : wa2-field2 to wa_final-field4,
             wa2-field3 to wa_final-field5,
             wa2-field4 to wa_final-field6.
append wa_final to it_final.
endif.
Clear : wa1, wa2, wa_final.
endloop.
In this case if the one key fieild value is not present there in second internal table but its there in first internal table still it will read that row with 2nd internal values having zeroes. Normally what does not happen in inner join case if the key field value will same in both the case ,then that will fetch only those rows.
Changed Code
loop at itab1 into wa1.
read table itab2 into wa2 witk key field1 = wa1-field1 binary search.
if sy-subrc = 0.
move: wa1-field1 to wa_final-field1,
           wa1-field2 to wa_final-field2,
           wa1-field3 to wa_final-field3.
move : wa2-field2 to wa_final-field4,
             wa2-field3 to wa_final-field5,
             wa2-field4 to wa_final-field6.
append wa_final to it_final.
endif.
Clear : wa1, wa2, wa_final.
endloop.
In this case the values will read to final internal table if both key field matches.
With Regards
Deepa

Problem with for all entries in select querry

hi,
Hi,
I am using select queery like this
SELECT version COUNT( * )
from ztbi_default_va4
INTO CORRESPONDING FIELDS OF TABLE   lit_new
FOR ALL ENTRIES IN lit_new1
WHERE network = lit_new1-network GROUP BY version.
this is not working showing error as:
The addition "FOR ALL ENTRIES" excludes all aggregate functions with
the exception of "COUNT( * )" as the single element of the SELECT     clause.
I am using only count(*) ,not using othes like max,min etc,,,,,,,,,
please suggest any missing in syntax,,,,attach relavant code using count(*) with for all entreis
any help appriciated,,,,,
Thanks in advance,,,,

Hi,
Try this -
TYPES: begin of t_data,
             version TYPE version,
             count    type i,
             end of t_data.
DATA: i_data TYPE STANDARD TABLE OF t_data,
           wa_data TYPE t_data.
DATA: l_version TYPE version,
           l_count TYPE i.
SELECT version COUNT( * )
from ztbi_default_va4
INTO CORRESPONDING FIELDS OF TABLE   lit_new
FOR ALL ENTRIES IN lit_new1
WHERE network = lit_new1-network.
SORT lit_new.
LOOP AT lit_new INTO lwa_new.
    IF lwa_new EQ l_version.
      l_count = l_count + 1.
    ELSE.
      wa_data-version = l_version.
      wa_data-count = l_count + 1.
      APPEND wa_data TO i_data.
      CLEAR: wa_data.
      CLEAR: l_count.
    ENDIF.
    l_version = lwa_new-version.
    CLEAR: lwa_new.
I hope this will do.
Make any necessary changes.
Regards,
Harsh Bansal

HT3775 I can't open MPEG 4 -movie files with Quick time or VLC

I can't open MPEG 4 -movie files with Quick time or VLC

VideoLAN - Download official VLC media player for Mac OS X

Change Open With for all files with a specific extension

Similar Messages

Maybe you are looking for