Change PO Output for AdobeForm

Hello All -
When we change a PO, only the changed items are being output. I would like the entire po to be output and not just the changed items. I have looked through the forum and I know that this is possible when using SAPscript or a SmartForm. This does not seem to be done as easily if you are using adobe forms. Does anyone have any ideas or has anyone done this before?
Thanks
Jane

Hi - The configuration only tells my program that I want a change to be print relevant or not. And standard SAP has it so that if it is print relevant, then the po that is output only includes the changed items. For example, in a 10 line item PO, I change item 1. If the change is print relevant, then the change PO that is output would be just item 1 and not the other 9 lines. I want the entire PO to be output including the change and unchanged items. This can be done by adjusting the print program for sapscript and sapform but it does not seem to be as easily done in Adobe forms.
I want to know if anyone using Adobe forms has been able to get SAP to print out the entire PO after changes and not just the changed item.

Similar Messages

Changing power output for Airport Extreme Card

How do you change the power output for the Airport Extreme Card? Is there a program that I can download to change airport's settings or the Airport Extreme Card's settings?
i.e. If the default power output for the Airport Extreme Card is 18mW, I would like to increase it to 25mW.

There is no way for a user to control the power output of the AirPort Extreme card.
Furthermore if the card was manufactured to output 18mW there is no magical way to increase it's physical ability so it can output more power.

How can I change the output for certain columns only?

I am finding it hard to explain my issue , as I am very green when it comes to database, but I will try my best.
I am writing a script that will query a database and output 5 columns, the first and last name of a student, the last name of their adviser, their enrollment status, and how many years they have been enrolled.
I have the student's enrollment date and graduation date stored, however not all students have graduated, so that field is null for some students.
my question is, how can I use their enrollment status of graduated to change the calculation of how long they were enrolled for.
This is what I have so far :
SELECT
     STUDENTS.NameFirstS,
     STUDENTS.NameLastS,
     STUDENTS.EnrollStatus,
     TRUNC((MONTHS_BETWEEN(SYSDATE, STUDENTS.EnrollDate))/12) as Years,
     FACULTY.NameLast
FROM
     STUDENTS,
     FACULTY
WHERE
     STUDENTS.ThesisAdvisor = FACULTY.FacultyId
I'm not sure where to go form here, like I said, I am very new. Thank You in advance!

Thank you for the warm welcome :)
My Oracle Version is 11.2.0.1.0
Here is the create statement I used for the table.
CREATE TABLE STUDENTS
(StudentId NUMBER(9)
,NameFirstS VARCHAR(255) NOT NULL
,NameMiddleS VARCHAR(255)
,NameLastS VARCHAR(255) NOT NULL
,PhoneHome NUMBER(10) NOT NULL
,PhoneOffice NUMBER(10)
,HomeCity VARCHAR(255) NOT NULL
,HomeState VARCHAR(255) NOT NULL
,HomeStreet VARCHAR(255) NOT NULL
,EnrollDate DATE NOT NULL
,EnrollStatus VARCHAR(255) NOT NULL
,StudyArea VARCHAR(255) NOT NULL
,SpouseNameFirst VARCHAR(255)
,SpouseNameLast VARCHAR(255)
,ThesisTitle VARCHAR(255) NOT NULL
,ThesisInternational VARCHAR(255)
,ConvocationDate DATE
,ThesisAdvisor NUMBER(9) NOT NULL
,Mentor NUMBER(9) NOT NULL
,CONSTRAINT STUDENTS_pk PRIMARY KEY (StudentId)
,CONSTRAINT STUDENTS_Mentor_fk FOREIGN KEY (Mentor)
REFERENCES FACULTY(FacultyId)
,CONSTRAINT STUDENTS_ThesisAdvisor_fk FOREIGN KEY (ThesisAdvisor)
REFERENCES FACULTY(FacultyId)
And here is 2 inserts of random data
INSERT INTO STUDENTS (StudentId, NameFirstS, NameMiddleS, NameLastS, PhoneHome, PhoneOffice, HomeCity, HomeState
, HomeStreet, EnrollDate, EnrollStatus, StudyArea, ThesisTitle, ConvocationDate, ThesisAdvisor, Mentor)
VALUES(778506631
          , 'John'
          , 'Jacob'
          , 'Smith'
          , 3125551234
          , 5182293313
          , 'Wilksbury'
          , 'Texas'
          , '14 Main Road'
          , TO_DATE('04-SEP-2003', 'DD-MON-YYYY')
          , 'Graduated'
          , 'Physics'
          , 'Why Move'
          , TO_DATE('07-JUL-2008', 'DD-MON-YYYY')
          , 157928743
          , 997569876
INSERT INTO STUDENTS (StudentId, NameFirstS, NameLastS, PhoneHome, HomeCity, HomeState, HomeStreet
, EnrollDate, EnrollStatus, StudyArea, SpouseNameFirst, SpouseNameLast, ThesisTitle, ThesisInternational, ThesisAdvisor, Mentor)
VALUES(251321188
          , 'Larry'
          , 'Timsfield'
          , 2815551200
          , 'Johnsburg'
          , 'Florida'
          , '223 Route 54'
          , TO_DATE('09-SEP-2010', 'DD-MON-YYYY')
          , 'Full Time'
          , 'Medicine'
          , 'Wanda'
          , 'Timsfield'
          , 'Cut Me Mick'
          , 'Yes'
          , 997569876
          , 101325587
I don't know how to format them like you did in your reply, so they look like a quote, so I hope that just pasting them in is okay.

Change keyboard output for specific key

Hello,
I own an iMac with an Apple (USB) keyboard. I'd like to use the right-side numbered part of the keyboard as a calculator. However that's very inconvenient because I' European (Greek) and the dot (.) sign is used in Europe as a thousands separator. So when I need to type "33,01" I need to search the comma (,) and I lose plenty of time.
Is there any app or way to change this behavior? I'd like the right side dot (.) - +the one sitting between 0 and "return"+ - to act as comma.
Regards

I know this post is old...however...
this may be what your looking for: http://hints.macworld.com/article.php?story=20080403055310704&query=mar

Change Build Output Filename for SSIS Project

I have a Visual Studio 2010 solution (TxMExtractLoad) with two SSIS projects: TxMExtractLoad.Discovery and TxMExtractLoad.Contract1. The project name (in project properties) is set to the proper two-part name in each project. However, when I
do a "Build", the generated .ispac file loses the second part of the project name: both projects build to "TxMExtractLoad.ispac" (in different directories, fortunately).
I can see where I can change the output *path* for the build, but not the output *filename*.
Any help, anyone?
Thanks in advance...

Came across this post whilst encountering the same issue and thought i would post the solution i discovered
The ispac will get its name from the Name defined in the project properties minus whatever is following the final name part
Therefore, your SSIS package of TxMExtractLoad.Discovery will become TxMExtractLoad.ispac
If you change the name in project properties to something like TxMExtractLoad.Discovery.myProject
or TxMExtractLoad.Discovery..ispac then when you build it it will build as TxMExtractLoad.Discovery.ispac
Hope this helps

Changing audio output device for currently running program

I'm not sure where to put this question, but all my searching hasn't seemed to find an answer...
If I have a program running, iTunes, VLC, a game, whatever, and want to change audio output from say Line Out to Headphones, I have to restart the program for the change to take effect. Is this by design/normal or am I missing something somewhere?

this is actually a quiet significant issue. There is no way in Flash to select the audio output device.
Today people have regular speakers and a separate headset. They all use the speakers for music and the headset for voice. Skype i.e. has the option to choose audio output device and its really handy, because
you dont have to bother to set the default device to the headset everytime you want to use it.
If you set the default device to the headset all other apps will send their audio output to the headset - which is not what you want either.
So people really want to leave the default device set to the speakers and not to the headset.
Nokia did this for Java
JRT 2.1 / Nokia UI API updated to version 1.4:
AudioOutputControl extension for controlling which audio output device, for example the device loudspeaker or earpiece, is used to play back audio
This really is an issue.

Output for changes versions in SRM

Hello,
We are currently trying to control when our SRM (server 550)system is to send output to our vendors, but the output is only to be sent if specific elements in an order is changed.
To do this we are using the table BBPD_COMP_FIELDS.
This works very well, there is just one problem that we cant seem to understand why.
If you created an order, then change the order with something that was not suppost to send output (because it is set in the table above) it sends the output. If you then change the same again it will not send out put (which is correct).
So what it does is for changes that shouldent send output when changed:
order --> output (correct)
change1 --> output (Wrong)
change2 --> no output (correct)
it should of been:
order --> output
change1 --> no output
change2 --> no output
Question is why and how do we get it to stop doing this?
Hope someone can help us.
Best Regards
Lisa M Simonsen

Hi
Use the PO version control BADi to change the version for the PO on identified field changes. In SPRO, out put conditions, trigger the change output when there is a change version of the document. This should work.
BBPD_COMP_FIELDS (with SM30). There is something mentioned about which fields to compare for PO output, you have to scroll some way down to get there.
Re: Changed PO output
Also, Please go through the following pointers, which might help you out.
Re: PO output fields
Re: Control PO output to vendor
Re: No Output Condition on Purchase Orders
Version Details
Do let me know.
Regards
- Atul

Cannot change the output medium for contract

Hi Everyone,
In the contract we have "Output" tab to change the output medium for the contract.
So the issue is when I click on the change button and try to change e-mail address,I am not able to do that.
The e-mail address is grayed out though I am in the change mode.
This is happening for some contracts only.
How should I change the e-mail address of the contract?
Thanks & Regards,
Khushbu.
Edited by: Khushbu Brahmbhatt on Feb 25, 2011 9:01 PM

Hi,
Have a look at the foll thread for more pointers;
Re: Change medium of output for Changed PO in SRM
BR,
Disha.
Do reward points for useful answers.

CHANGE THE OUTPUT MEDIUM FOR SRM PURCHASE ORDERS

We are using SRM 5.0
I tried to change the SRM purchase order's output
medium from 'XML' to 'Print' using a function module
'BBP_OUTPUT_PO_PARAMS_SET' within the BADI 'BBP_ECS_PO_OUT_BADI'. Though it changes the
output medium and chooses the right radio button
at the UI interface level (i.e)
Purchase order Header->output->
radio buttons(print,email,fax,xml)
It still holds the output medium as 'XML' at the
Document output log and process the document as 'XML'.
Is there a way to update the output log to hold the changed medium i.e (print)
Thanks and Regards,
Gia

Hi,
Have a look at the foll thread for more pointers;
Re: Change medium of output for Changed PO in SRM
BR,
Disha.
Do reward points for useful answers.

SRM 7.0 Output for changed purchase order documents

Hi all,
if we change purchase orders we like to send a PO output document for changed purchase orders only if we change certain PO fields in header or items.
What is the functionality in PO - Header - Output - Order and Send Immediatelly ? We thought that this function is the solution!
But independent we press the button <Order and Send Immediatelly > or button <Order> the system creates allways an output document in any cases of PO field changes which will be sent to a supplier (fax, email). How we can control that a PO document only will be created in cases we define ?
Kind Regards
Edited by: Hermann-Josef Wessels on Mar 28, 2011 6:53 PM

Hi Jay,
we like to control the output because PO changes for G/L account, cost centre or change from account assigment order to cost centre are not interesting for the supplier and in this cases a PO document should not be sent to the supplier. This was the main reason why we like to use function <Order and Send Immediatelly>.
So I would like to clarify the requirement:
1. Automatic created output document if a new PO will be created
2. Automatic created output document if a PO will be changed but no output if the following fields will be changed:
e.g. for G/L account, cost centre or change from account assigment order to cost centre
So we come back in our discussion to table: BBPV_COMP_FIELDS. There are entries for POO = PO Output and POR = Version comparison for Purchase Order.
Question: Can I use structure name: BBP_PDS_ACC for our requirement. If yes which field-names I have to maintain in detail in this table. If possible I need the entries in detail.
Kind Regards
Edited by: Hermann-Josef Wessels on Mar 30, 2011 9:20 AM

WM: Sending output for delivery after changing quantity on TO by shipping control

Dear Experts:
You have to allow user to change quantity of delivery, for all kinds of reasons, for example, they didn't find enough inventory to ship!
There are options: at SPRO WM interface for shipping control, select copy WM quantity (to delivery), you can choose:
------ "1": copy quantity,
------ "2", copy quantity and post goods issue.
I want to choose "2", since after changing quantity at TO confirmation then going back to outbound delivery and Post Goods Issue becomes an extra step, since you are not changing anything there.
Now the problem is the output. Since the delivery quantity has been changed, another output must be sent with the new quantity.
The requirement (in output determination procedure) to trigger the output at Post Goods Issue is "1": Delivery GI posted.
Then for the output condtion, for the "Dispatch time", I tried "4".
In my testing, the delivery was updated with the new quantity and PGI was also completed, output was also created. Perfect, but DAMN, the output just doesn' go, It is yellow "0 Not processed".
I had to use VL02N, open the delivery, then save it, now it went out, "1 Successfully processed", since now the "Dispatch time", "4": Send immediately (When saving application), " is met..
I tried "Dispatch time", "3", and "1", doesn't work too.
So I could just set up shipping control ------ "1": just copy quantity and not to PGI, then get users to PGI with VL02N, it just makes me feel bad, I wanted to automate the last step, PGI and get my output with the new quantity, so Is it possible?
Thank you guys!
Regards
Simon

Dear Experts:
You have to allow user to change quantity of delivery, for all kinds of reasons, for example, they didn't find enough inventory to ship!
There are options: at SPRO WM interface for shipping control, select copy WM quantity (to delivery), you can choose:
------ "1": copy quantity,
------ "2", copy quantity and post goods issue.
I want to choose "2", since after changing quantity at TO confirmation then going back to outbound delivery and Post Goods Issue becomes an extra step, since you are not changing anything there.
Now the problem is the output. Since the delivery quantity has been changed, another output must be sent with the new quantity.
The requirement (in output determination procedure) to trigger the output at Post Goods Issue is "1": Delivery GI posted.
Then for the output condtion, for the "Dispatch time", I tried "4".
In my testing, the delivery was updated with the new quantity and PGI was also completed, output was also created. Perfect, but DAMN, the output just doesn' go, It is yellow "0 Not processed".
I had to use VL02N, open the delivery, then save it, now it went out, "1 Successfully processed", since now the "Dispatch time", "4": Send immediately (When saving application), " is met..
I tried "Dispatch time", "3", and "1", doesn't work too.
So I could just set up shipping control ------ "1": just copy quantity and not to PGI, then get users to PGI with VL02N, it just makes me feel bad, I wanted to automate the last step, PGI and get my output with the new quantity, so Is it possible?
Thank you guys!
Regards
Simon

Full PO output for any change in PO ( EDI output)

Hi Gurus...
Currently whenever there is a any change in PO only the relvant change
is sent for EDI out put ( Standard SAP)
Our client requirement is whenever there is a change in PO the full PO
should be sent to EDI out put ( same as when purchase order is created).Change is required for a specific vendors.
Your help on the issue ASAP is highly appreciated.
Thanks
Dipak

Hi,
Go for changeable indicator 6 in release indicator
OR
Go for User exit EXIT_SAPLEBND_002 or check to modify function module ME_REL_STRATEGIE_EKKO for to reset existing release strategy for reduced quantity and/or values.
Regards,
Biju K

In R12 how to change concurrent output/log file name prefix?

how to change concurrent output/log file name prefix?

but i want to change change concurrent output/log file name prefix?You cannot, and I believe it is not supported for all concurrent requests -- Please log a SR to confirm this with Oracle support.
Thanks,
Hussein

How to change default output XMLP report to rtf/excel !

I used xmlp 5.6.2
The default output for report is pdf file.
Now i want to change default output to rtf or excel file
Please ! help me !

Hi Brightsea,
We customized the code in FNDRSRUN.fmb, But we are not able to get the output in RTF format.
Our requirement is to display the report output in .rtf or .xls(Not required to defaultly as .rtf or .xls).
we are getting the following error.
"The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://galaxian.bluestar.cvg0:8000/OA_CGI/FNDWRR.exe?t...
{\rtf1\ansi\deff0"
^
Regards,
suresh.

Excel Output For Standard Report In R12

Hi Experts,
My Client wants Excel Output for Standard Reports ( ex:-Open Purchase Order Report (by cost center)_xml)
I changed the default output to Excel in Template of xml publisher administrator Responsibility.
Now it is showing the Excel output, but The layout of report is not same as layout which in text output of standard report.
Please guide me is there any solution to develop the reports layout in ms-excel using xml file rather than rtf template.
Thanks
Durga.

Hi Alex,
Thanks for your replay.
Generating the new rtf template which is same as standard layout is difficult task for us. Actually we have 120 reports which have same requirement.
Is there any other solution for this . please guide me
Thanks
Durga
Edited by: 805567 on Jan 23, 2012 12:33 PM

Change PO Output for AdobeForm

Similar Messages

Maybe you are looking for