Change Build Output Filename for SSIS Project

I have a Visual Studio 2010 solution (TxMExtractLoad) with two SSIS projects: TxMExtractLoad.Discovery and TxMExtractLoad.Contract1. The project name (in project properties) is set to the proper two-part name in each project. However, when I
do a "Build", the generated .ispac file loses the second part of the project name: both projects build to "TxMExtractLoad.ispac" (in different directories, fortunately).
I can see where I can change the output *path* for the build, but not the output *filename*.
Any help, anyone?
Thanks in advance...

Came across this post whilst encountering the same issue and thought i would post the solution i discovered
The ispac will get its name from the Name defined in the project properties minus whatever is following the final name part
Therefore, your SSIS package of TxMExtractLoad.Discovery will become TxMExtractLoad.ispac
If you change the name in project properties to something like TxMExtractLoad.Discovery.myProject
or TxMExtractLoad.Discovery..ispac then when you build it it will build as TxMExtractLoad.Discovery.ispac
Hope this helps

Similar Messages

Cannot change the output medium for contract

Hi Everyone,
In the contract we have "Output" tab to change the output medium for the contract.
So the issue is when I click on the change button and try to change e-mail address,I am not able to do that.
The e-mail address is grayed out though I am in the change mode.
This is happening for some contracts only.
How should I change the e-mail address of the contract?
Thanks & Regards,
Khushbu.
Edited by: Khushbu Brahmbhatt on Feb 25, 2011 9:01 PM

Hi,
Have a look at the foll thread for more pointers;
Re: Change medium of output for Changed PO in SRM
BR,
Disha.
Do reward points for useful answers.

[svn:osmf:] 13633: Add build config file for SMILPlugin project

Revision: 13633
Revision: 13633
Author:   [email protected]
Date:     2010-01-19 14:23:44 -0800 (Tue, 19 Jan 2010)
Log Message:
Add build config file for SMILPlugin project
Added Paths:
    osmf/trunk/plugins/SMILPlugin/SMILPlugin-build-config.xml

Hi mg30,
There is no way to overwrite the XML configurations file just through modifying the SQL Server Agent job steps. The Dtexec utility will apply the default package configurations for the second time after applying the options specified in the command
lines or other package configurations configured in the job step.
If the package is not deployed/installed, the Dtexec utility looks for the XML configurations file according to the file path defined in the Package Configurations Organizer window. In this situation, you need to either disable the package configurations
or modify the XML file path in the BIDS.
If the package is already deployed/installed, you need to modify the package as above or re-specify the install folder for the package configurations file.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

[svn:osmf:] 13606: Update build-config files for framework projects.

Revision: 13606
Revision: 13606
Author:   [email protected]
Date:     2010-01-18 17:20:00 -0800 (Mon, 18 Jan 2010)
Log Message:
Update build-config files for framework projects.
Modified Paths:
    osmf/trunk/framework/OSMF/readme.txt
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest.mxml
    osmf/trunk/framework/OSMFIntegrationTest/OSMFIntegrationTest.mxml
    osmf/trunk/framework/OSMFIntegrationTest/OSMFIntegrationTestHeadless.mxml
    osmf/trunk/framework/OSMFTest/OSMFTest.mxml
    osmf/trunk/framework/OSMFTest/OSMFTestHeadless.mxml
Added Paths:
    osmf/trunk/framework/OSMF/osmf-build-config.flex
    osmf/trunk/framework/OSMF/osmf-build-config.flexcov
    osmf/trunk/framework/OSMF/osmf-build-config.xml
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/OSMFIntegrationTests.as
    osmf/trunk/framework/OSMFIntegrationTest/osmfintegrationtest-build-config.xml
    osmf/trunk/framework/OSMFTest/OSMFTest.flex
    osmf/trunk/framework/OSMFTest/OSMFTest.flexcov
    osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flex
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flexcov
    osmf/trunk/framework/OSMFTest/osmftest-build-config.xml
Removed Paths:
    osmf/trunk/framework/OSMF/mediaframework-build-config.flex
    osmf/trunk/framework/OSMF/mediaframework-build-config.flexcov
    osmf/trunk/framework/OSMF/mediaframework-build-config.xml
    osmf/trunk/framework/OSMFAIRTest/MediaFrameworkAirTest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/mediaframeworkintegrationtest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/MediaFrameworkIntegrationTests.as
    osmf/trunk/framework/OSMFTest/MediaFrameworkFlexTest.flex
    osmf/trunk/framework/OSMFTest/MediaFrameworkFlexTest.flexcov
    osmf/trunk/framework/OSMFTest/mediaframeworkflextest-build-config.flex
    osmf/trunk/framework/OSMFTest/mediaframeworkflextest-build-config.flexcov
    osmf/trunk/framework/OSMFTest/mediaframeworkflextest-build-config.xml
    osmf/trunk/framework/OSMFTest/org/osmf/MediaFrameworkTests.as

What kind of projects are they (Struts/JSF/Hibernate)? Does the working project differ in any way with other two apps?
What exactly is not working? Are they recognized by workshop as Struts/JSF/Hibernate app?
Please send the .log to [email protected]

Changing audio output device for currently running program

I'm not sure where to put this question, but all my searching hasn't seemed to find an answer...
If I have a program running, iTunes, VLC, a game, whatever, and want to change audio output from say Line Out to Headphones, I have to restart the program for the change to take effect. Is this by design/normal or am I missing something somewhere?

this is actually a quiet significant issue. There is no way in Flash to select the audio output device.
Today people have regular speakers and a separate headset. They all use the speakers for music and the headset for voice. Skype i.e. has the option to choose audio output device and its really handy, because
you dont have to bother to set the default device to the headset everytime you want to use it.
If you set the default device to the headset all other apps will send their audio output to the headset - which is not what you want either.
So people really want to leave the default device set to the speakers and not to the headset.
Nokia did this for Java
JRT 2.1 / Nokia UI API updated to version 1.4:
AudioOutputControl extension for controlling which audio output device, for example the device loudspeaker or earpiece, is used to play back audio
This really is an issue.

Changing the Customer no for unapproved project

Dear Dina,
A new project created with customer A and the project is in unapproved status...at this stage any possibilities to change the customer number to that project...for the same project number...
or
we need to end date the existing project and create new 1.
please advice.
thanks a lot n advance....

Hi
Using the form you could always add customers to the project with zero % of contribution.
If you have a wrong customer assigned to a project, and you have not allocated funds from that customer agreement to the project, you are in a safe place. If you had allocated fund, enter a negative fund line for the wrong customer agreement, and baseline the funding, so it become zero.
Now, even when the system does not allow you to update the customer percentage, you can do it directly on the database using TOOLS EXAMINE or SQL. Update the percentage of the wrong customer to zero, and the percentage of the correct customer to 100%. Since this is an intervention behind the forms, you should do it very carfully. Verify you are doing such update while no user is trying to baseline funding or revenue budget, and also that no one is running GDR or GDI on the same time.
Dina

CHANGE THE OUTPUT MEDIUM FOR SRM PURCHASE ORDERS

We are using SRM 5.0
I tried to change the SRM purchase order's output
medium from 'XML' to 'Print' using a function module
'BBP_OUTPUT_PO_PARAMS_SET' within the BADI 'BBP_ECS_PO_OUT_BADI'. Though it changes the
output medium and chooses the right radio button
at the UI interface level (i.e)
Purchase order Header->output->
radio buttons(print,email,fax,xml)
It still holds the output medium as 'XML' at the
Document output log and process the document as 'XML'.
Is there a way to update the output log to hold the changed medium i.e (print)
Thanks and Regards,
Gia

Hi,
Have a look at the foll thread for more pointers;
Re: Change medium of output for Changed PO in SRM
BR,
Disha.
Do reward points for useful answers.

Is there a way to change the output type for Email Remittance Program?

Hello,
We are trying to implement Separate Remittance Program.The seeded output type is PDF( I have checked the output type for send separate remittance concurrent program) however the
email which we receive looks like a regular email I mean with a normal text . Is there a way to get the output in different type like excel,attachment,pdf.
Any inputs would be highly appreciated.
Thanks,
Sushma

Currently there is a bug raised
Bug 8208646 : R12 UNABLE TO SEND SEPARATE REMITTANCE ADVICE AS EMAIL ATTACHMENT IN PDF.
If you want to customize this process you need to create data definition,new rtf template and bursting program to send pdf as attachment.

No longer able to mute or change playback output device for capture.

I have no preview button to turn off in my capture window and have instead gone into the FCP preferences to change the playback output device to something other then my Fireface800 IO device, such as the built in output so that what's being captured only comes out the little speaker in the tower.
Thus I am free to work on other stuff. (8 core mac pro, gobs of ram, multitasking has never been a problem, even while capturing HD.)
But as of the latest update (I keep all my apps up to date), capture plays through the System default device no mater what the FCP setting. So with out a mute button for the capture, I'm screwed.
I'm screwed because I have to Mix down an EP while I capture 26 hours of conference footage at the same time. Obviously, I can't mix properly with that chatter playing loudly over it.
Apple said I have to reinstall because there's no preview button and there should be but I am curious if there's any other way (because it's a huge pain in the *** and tends to screw up other things) and I would like to know if the way I usually do it is broken for other people, so I know if I can upgrade to the latest version again because it was some goofball problem with the framework that reinstalling fixed or if not because that's a bug in 7.0.3
1. Choose one audio output (say, Built in Line Output or your default sound card) everywhere that matters in the Final Cut preferences for Audio output, including Audio Playback Output which is what I've been using to switch this for, gosh, years probably just out of habit.
2. Log and Capture, capture some footage from tape. (I happen to be working with a basic HDV firewire profile.) What device do you hear output from?
3. Stop capturing... and, if you wish, for good measure, close the capture window.
4. Go back to FCP preferences, now choose a DIFFERENT audio output, say, Built In Speaker Output.
5. Try to capture some footage. Is the sound coming out of the built in speaker now?
IS THERE ANY OTHER WAY TO QUICKLY SILENCE THE AUDIO FROM FCP DURING CAPTURE?
Thank you.

excuse me, not linksystem, its a verizon FIOS wireless router & modem as part of the package. i was thinking my old setup.
new system...cant edit my posts....?

Wireless Toolkit J2ME - changing the directory structure for your projects

When I create a new package in the Sun Java Wireless Toolkit, the toolkit is creating a folder for the application and its subfolders in the following directory:
C:Documents and settings/Owner/j2mewtk/2.5.2/apps/<name_of_project>....
I am trying to change the directory for new and existing projects so that the directory is:
C:WTK2.5.2/apps/<name_of_project>....
The WTK is already installed directly under the C drive (C:WTK2.5.2/ )
Any help would be much appreciated.

I experience the similar problem.
But got success with some mobile models and most of them fail.
I put the following file in the web page.
(test.html, test.jad, test.jar)
Sony Erisson P800, install successful when accessing http://x.x.x.x/test.html, or http://x.x.x.x/test.jar
Nokia 7650, install successful when accessing http://x.x.x.x/test.jar
Nokia 3530 Fail,
Does anyone know how to install java game to Nokia 3530 through Web.

Changing an output type for SmartForms

Hi all,
I have a picklist that I changed from SAPScript to SmartForm. I am trying to edit the output type EK00 to use the SmartForm. I am using V/38 to edit EK00 but I can't figure out the right properties. Right now I have the FM name (/1BCDWB/SF00000017) as the Layout Module, the SmartForm name (ZPCC_PICKLST_STD) as the SmartForm. Also, under Pricessing 1, I have the print program (ZRVADEK01), FORM routine as (SMARTFORM_PRINT) and Form as (ZPCC_PICKLST_STD). Is there anything else that I need to change? When I try to use EK00 it is still looking for a SAPScript instead of a SmartForm.
Regards,
Davis

Matt, thanks for the reply. I just tried what you posted and it still gives me an error. I get a popup that says "WRITE_FORM is invalid, OPEN_FORM is missing.
Could my problem be that the old SAPScript and the new SmartForm have the same name? Below is the configuration:
Layout Module: nothing there
SmartForm: ZPCC_PICKLST_STD (name of the smartform)
Processing 1:
Program: ZRVADEK01
FORM routine: SMARTFORM_PRINT
Regards,
Davis
EDIT: I do not have any SAPScript functions (open_form, close_form, etc...) in the print program. I took the preconfigured print program for SDPIK_L (preconfigured picklist) and added our custom logic.
Message was edited by:
Davis

How do I change filename for single-image HTML pages in web gallery for LR 3

Hi,
I would like to change the default filename for the HTML pages produced by Lightroom 3 in the web gallery. Specifically, I would like to remove the string "_large" from the HTML filename, so it corresponds exactly to the image filename.
Specifically, the URL by default is like this:
http://www.mysite.com/content/_c_EMT2146_large.html
and I would like it to be like this
http://www.mysite.com/content/_c_EMT2146.html
I assume there is some way to make this change using the template editors, but I can't figure it out.
thanks,
James Riemermann

Turns out there's a fairly easy way to change that on Windows, but I can't figure out an equivalent on a Mac, which is where the need is. On windows, I can edit (after backing up) the following two config files:
C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.6\Shared\webengines\default_html.lrwebengine\grid.html
C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.6\Shared\webengines\default_html.lrwebengine\manifest.lrweb
In which the "_large" string is appended and can be removed, following which the gallery works exactly as I would hope.
But I can't find the equivalent files on the Mac, though I would assume they exist.

Want to change output type for 10000 sales orders through MASS

Hi Friends,
I would like to change the Output type in the sales order for 10000 sales orders.
Can I do with MASS transaction. If so, Plz let me know how ?
Is there any other process to change the output type for 10000 sales orders, as its difficult to manually in each and every sales order.
Its very urgent issue, Plz let me know at the earliest.
Thanks & Regards,
Praveen Kumar. A

This may be little tough for 10000 sales orders.
1. You have to remove the output record for the irrelevant output record using tcode VV12 for the relevant document type. So now for the document type, the old output wont be triggered.
2. Now, create output records for hte correct output type in VV11 tcode(for the output type BA03) for the document type. Now this output will be triggered for all the document types you are creating from now onwards.
3. To trigger the output type BA03, in all the old orders, you just have to open these sales orders in change mode (VA02), and just save it. When u open it the output type BA03 will be automatically triggered as the master data is maintained in VV11. But because just opening all the 10000 sales orders in VA02 one by one be a mechanical task, you have to think of some tool for this.
May be a CATT procedure can do the trick. Else, you can just create a small program, where you can upload these sales orders and the program will just open these orders in change mode and just saves it (without making any changes). Then the output will be retriggered.
Here again, if you are printing the output directly, it is advisable to trigger the output in batch mode(Date/Time field is 1 in VV11), and then you can again trigger the printing again using the program RSNAST00 after office hours for these 10k orders.
I hope I answered ur query.
Pls lemme know if you need some more info. (You can reward me too...)

Running "Build 'em All" example Xcode project wiped out MediaCore folder

I'm having a hard time setting up Xcode to properly compile the example code into a debug product build that eventually ends up in the MediaCore folder.
I initially got it to work simply by clicking the 'Run' button on the 'Skeleton' and 'Checkout' projects.
Then I decided to just build them all, and pressed 'Run' while I had the 'Buildall' selected. Seemed like everything ran okay, but then AE was starting to act buggy. Told me Quicktime wasn't installed, etc. I noticed that all my plugins were missing, and sure enough the entire MediaCore folder seemed to be overwritten. Do I have to re-install AE and all my plugins to get those back?
Most importantly, though, is why did running the 'Buildall' project wipe out the folder of everything?
I read this in the SDK guide:
We’ve combined the sample projects into a single master project, stored in the Examples folder of the SDK. For Mac OS, it is Buildall.xcodeproj; for Windows, it is BuildAll.sln.
In your IDE, you’ll need to change the output folder of your project to build into After Effects’ plug-in folder. For development, we recommend using the following path for Mac
OS: /Library/Application Support/Adobe/Common/Plug-ins/[CS version]/MediaCore/
for example: /Library/Application Support/Adobe/Common/Plug-ins/CS6/MediaCore/
So, I set absolute paths for the build location in my project settings dialog, in the locations tab. I placed 'intermiediates' in a different folder from 'products'.
I just need to know they best way to configure Xcode 4.5 to output the example projects in the correct manner. I'm afraid I'm going to have to reinstall the plugins.
Thanks!
Removed incorrect image.

hi Lazlo Hollyfeld! welcome to the dark side... :-)
set to build directory to any folder you like (i created a nice folder called "build64"),
then just put a shortcut from AE's "blug-ins" folder to you build folder.
yes, AE does shortcuts.
leave media core alone...

Constraints/Output Buffer for FPGA Pins (e.g. PXI_LBLSTAR0)

Hi anybody,
is there a way to change the output options for the pins provided in the FPGA files?
For example: in the UCF file for the 8711R FPAG Board, there are constraints set for nearly any of the FPGA lines.
<snip>
NET "PXI_LBLSTAR0" IOSTANDARD = LVTTL;
NET "PXI_LBLSTAR0" DRIVE = 6;
NET "PXI_LBLSTAR0" SLOW;
<snip>
What, if i want to change the output driver to HIGH Speed?
Is there a way to do this in the LabVIEW project/VI
Thks in advance for your time.
/Tilman

Hi Tilman,
I am sorry. I asked my colleagues but it is not supported to change this ucf files.
There are several risks involved: Using this workaround will change this setting for any and all VIs compiled from this computer. This will affect any Reconfigurable I/O targets that you compile the VI for. In other words, this could cause problems if you are targetting devices other than the 7811R. There is no indication on the VI that the drive strength has been changed. Therefore, you must keep track of these settings. When changing the Driver Type to a setting other than the default, you are increasing the likelihood of cross-talk between Digital lines. Chaging other options in the toplevel_gen.ucf could cause some undesirable affects.
I hope you will get along with the default settings.
Kind Regards,
Vanessa

Change Build Output Filename for SSIS Project

Similar Messages

Maybe you are looking for