Change port 50001 to 443

Hello all,
I need to change the port 50001 to 443 for https access to my portal EP 6.0 SP18 (running on Java 6.40 SP18 and Solaris 10/Oracle 9). I have read note 421359 and the icmbnd permissions are ok . I tried going to Visual Admin under the HTTP provider service of the dispatcher and change the port from 50001 to 443 but this didn't do the trick.
What am I missing here? Any help will be very much appreciated
Many thanks
Andreas

Hi,
It should be done from the visual administrator (ref. http://help.sap.com/saphelp_nw04/helpdata/en/b8/437d46d4451e4c9ab756e272a1581d/frameset.htm)
Check that no other application is listening on the port 443
Start->run ... cmd
netstat -an | find LIST
Dagfinn

Similar Messages

How to open ports 119 and 443 in my Mac?

I've been trying to use the UseNeXT software with my Mac with no success. I called their support and they told me I need to open the ports 119 and 443. I contact Apple support and they told me that is beyond their scope (???).
Can somebody help me with that? I tried to find it online, but all tutorials that i tried didn't work or are outdated.
Thanks

Hi Drew,
It probably depends on the router as to the method used to open the ports.
As I have said elsewhere in the thread the first 1024 ports are open in most router to allow things to work Out of the Box such as Mail (110, 25, 567, 569, 995, 996 and many more ) and web Browsing (port 80 mostly but secure site can use 443) FTP (21 and 22) to name some.
Port Forwarding is one way to open some of the ports for One IP (computer).
Most routers have table for doing this and this can be limited as to the number of ports included.
This Linksys pic shows how to do it for some as it allows groups based on Start and end ports. However it restricts it to one IP
DMZ is a form of Extreme Port Forwarding that opens all 65535 ports to one IP (Computer)
In both the above cases other computers (IP addresses) are excluded from using the ports.
Port Triggering doe allow multiple computers to access the same Port but requires that you know the lead - Trigger - port involved for each app.
It is limited by the table size for your particular router.
Same Router in Trigger ports for iChat 3
Most router come with UPnP nowadays.
It is an ON/Off setting that allows the apps on the computer to say which ports are needed and when.
On some you can reduce the time to live and the Hop amounts.
The ports stay open from a period of normally 30 mins after non use.
This can be changed.
It also tends to list the number of Hops (the number of devices beyond the UPnP device) that it can be heard.
My Sky Hub
I have no other router on my network but I do sometimes use Internet Sharing between two computers hence the 2 Hops.
Every other device is only one Hop away from the the router.
There are concerns that the "Advertisement" is seen upstream (internet side) as well as device downstream.
The Concern is that this could be Up to your ISP and then down to the "next" IP end user on the particular router/server at the ISP end.
I have seen no evidence of this being the case.
Hope this helps.
8:45 pm Monday; May 5, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HTTPS and UWL and port 50001

When we click on the Manager Self Service tab in SAP portal when using https/ssl (https://server.company.com/irj/portal), all iViews appear correctly except for the UWL which is requested in a non-secure way over port 50000.
http://server.company.com:50000/webdynpro/dispatcher/sap.com/tckmcbc.uwl.ui~wd_ui/UWL
If I add the https port to the URL (50001), the UWL opens fine and secure:
https://server.company.com:50001/irj/portal
https://server.company.com:50001/webdynpro/dispatcher/sap.com/tckmcbc.uwl.ui~wd_ui/UWL
Any ideas on why this would be? For some reason, if I don't put a port on there and use https, the UWL iView changes to the http/port 50000 location. But if I use https and include port 50001, the UWL opens with the secure link.
Is there a setting somewhere that would cause the UWL to go to http and port 50000 unless I specifically tell it to go to port 50001?
Other webdynpro pieces open up fine, such as the team calendar:
https://server.company.com/webdynpro/dispatcher/sap.com/ess~lea/TeamView
Note: UWL config has the same problem as the UWL itself:
/webdynpro/dispatcher/sap.com/tckmcbc.uwl.ui~wd_admin/Configuration
Unless I specifically put port 50001, it'll go to http and port 50000, which is unsecured.
Hopefully this explanation makes sense.

Hello
Curious if there was any resolution to this issue - our situation is very similar, although I have not configured the portal to support HTTPS. We are accessing via a load balancer (HTTPS) which then sends the request to the HTTP port of the portal.
Accessing the UWL by chaning the URL manually to HTTPS as you experienced works fine:
https://loadbalancer.domain.net/webdynpro/dispatcher/sap.com/tckmcbc.uwl.ui~wd_ui/UWL

How can I set up a WD My Cloud with my Airport Extreme - I can't get it to open ports 80 and 443?

For remote internet access to the WD My Cloud Mirror, I have been advised that ports 80 and 443 must be open in order to reach the WDMyCloudMirror. My Motorola Gateway (Surfboard SB6141) is connected directly to my Airport Extreme (WAN port) which is in turn connected to the WDMyCloudMirror (all by ethernet cables). I do not have FULL instructions on how to properly manually configure the Airport Extreme to open the ports. I have tried an earlier posting which provides many of the steps, but not all of the required information is included (how to determinge the IP address to be assigned, etc.). I did the best I could with the information given, but the test using "YouGetSignal" showed the ports as still closed and attemps to reach the WDMyCloudMirror by the internet failed as well (of course). The WDMyCloudMirror has enough Apple "stuff" included in it (software, I suspect) that an Apple legal acceptance is required for its set-up, yet Western Digital Tecnical Support is unable (or unwilling?) to help with this aspect of its configuration required to work within the Airport Extreme environment. I have returned the WD My Cloud Mirror to Amazon as "not able to work", but I have not given up the hope that I can eventually get the ports open so that I can get this cloud device, or one similar, to permit remote internet access.

Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

I can not sync my IPhone to My Imac. I have the latest version of ITunes on my Imac. I have tried reseting my phone (3), changing ports. Nothing works. I was thinking maybe my phone has the earlier version of ITunes but I can't update it.

I can not sync my IPhone to My Imac. I have the latest version of ITunes on my Imac. I have tried reseting my phone (3), changing ports. Nothing works. I was thinking maybe my phone has the earlier version of ITunes but I can't update it.

Did you already have a look at this article?
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?

wish i can rmber how mine was fixed i think i just waited tried again and likr magic it worked again left itunplugged, i was like you recently boughtand it happened to me, now i have another diffrent promblem with it.

Windows 2008 Server contacting multiple public IP on port 80 and 443

Windows 2008 Server contacting multiple public IP on port 80 and 443
Source : Microsoft Lync 2010
Port : 80
Destination : unknown.prolexic.com
Source : Internet Explorer
Port : 80
Destination :a-0001.a-msedge.net
Source : Internet Explorer
Port : 443
Destination :204.79.197.200
Is this virus? how to stop the same?

Org name of the IP shows Microsoft Corporation
Since its hits on firewall , i will have to stop the same
but not sure for what its being contacted to these Ips
OrgName: Microsoft Corporation

How do I see or change ports on macbook pro

I am having problems getting into a Cisco Meetingplace room and one of the suggestions is to change ports. How do I view the ports on a Macbook Pro?

you don't see ports. Normally you can set ports in the relevant application, like Chat apps, or Mail, in the account settings.

I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled

I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled firewall 8. even tryed putting mobile in DFU mode to restore it not of this worked so please help me

please replyyy i'm stuck on this like whole week

Cannot bring OHS up after attempting to change port

Hello,
we tried to change port via Web for our ohs1 server and now we cannot bring OHS tier up.
OPMN gives the following error:
opmnctl startall: starting opmn and all managed processes...
================================================================================
opmn id=larry:6701
1 of 2 processes started.
ias-instance id=asinst_1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohs1/OHS/OHS/
Error
--> Process (index=1,uid=24119137,pid=15338)
failed to start a managed process after the maximum retry limit
Log:
/source1/oracle/Middleware/asinst_1/diagnostics/logs/OHS/ohs1/console~OHS~1.log
Please advise,
GS

Fabian,
Thanks for your reply.
This log has the following entries:
12/03/28 17:12:58 Start process
/source1/oracle/Middleware/Oracle_FRHome1/ohs/bin/apachectl startssl: execing httpd
[Wed Mar 28 17:12:59 2012] [warn] Errors will be logged into /source1/oracle/Middleware/asinst_1/diagnostics/logs/OHS/ohs1/ohs1.log
12/03/28 17:13:00 Start process
/source1/oracle/Middleware/Oracle_FRHome1/ohs/bin/apachectl startssl: execing httpd
[Wed Mar 28 17:13:00 2012] [warn] Errors will be logged into /source1/oracle/Middleware/asinst_1/diagnostics/logs/OHS/ohs1/ohs1.log
GS

Can we run a site both on port 80 and 443

Running Lion Server 10.7.2 on a Mac Pro
A custom web site runs fine on port 80. When we set up the same site to also be able to run on port 443 we ran into trouble. Server.app shows the default machine web site and our two versions of the site on port 80 and 443. After the 443 site was added and a certificate selected for it, no web pages are being served.
We want our web site to run on 80 and as required 443. This was easy to set up in Server Admin on 10.6.X
Any suggestions?
Thanks - Erich

John,
Thank you for looking at this. It seemed odd to me during development that so many features in the GUI had dissappeared. I hoped that, like some other options, they had just been moved.
I have no trouble with simplification of some features to allow a larger number of users to access the technology but it doesn't make sense that the features be removed outright when they were there in the past and previous users were taking advantage of the ease in setup. I am curious what the decision making process was like on this.
I'll take a look at Webmin and let you know how it goes.
-Erich

How to change Port 1521 to 1526 on EBS 11.5.10.2

Hi,
I am using EBS 11.5.10.2 and 9i Database. ( Single Node ) , on Linux platform
I want to change port form Port 1521 to 1526 on the Server
Can some please guide me how to do this.
Thanks,

There is a port pool calculator in the Rapid Clone FAQ for 11i. The easiest way to change an existing port pool is to vi $CONTEXT_FILE in both oracle and applmgr environments, globally change the ports, and run adconfig on both database and applications with the applications down. Restart the database and listener when you are done.
FAQ: Cloning Oracle Applications Release 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1
On database $CONTEXT_FILE:
:1,$s/1521/1526/g
On applications $CONTEXT_FILE:
:1,$s/1521/1526/g
:1,$s/1626/1631/g
:1,$s/7000/7005/g
:1,$s/8000/8005/g
:1,$s/8100/8105/g
:1,$s/8200/8205/g
:1,$s/8800/8805/g
:1,$s/9000/9005/g
:1,$s/9100/9105/g
:1,$s/9200/9205/g
:1,$s/9300/9305/g
:1,$s/9500/9505/g
:1,$s/9600/9605/g
:1,$s/9700/9705/g
:1,$s/9800/9805/g
:1,$s/10000/10005/g
:1,$s/10100/10105/g
:1,$s/10200/10205/g
:1,$s/10300/10305/g
:1,$s/15000/15005/g
:1,$s/16000/16050/g
:1,$s/16009/16059/g
:1,$s/17000/17050/g
:1,$s/17009/17059/g
:1,$s/18000/18050/g
:1,$s/18009/18059/g
:1,$s/19000/19050/g
:1,$s/19009/19059/g
:1,$s/12345/12350/g
:1,$s/20000/20005/g

How to change port settings? on macbook pro 15"

hi all, I am trying to sync my phone from my Mac and the software im using has a default port it sends to so how to i manually changes port settings for port 1? thank you.

are these COM ports or TCP/IP ports? Give us a little info on this software.

How to change ports in apps

Hi Sawwan,
how to change ports in apps 11i on Linux, Please let me know if any metalink notes.
Thanks

Danny,
Please see if these documents help.
Note: 419823.1 - OAM: Web Components Status: Shows Down Even When The System Works Fine
Note: 309271.1 - Web Components Status in OAM Shows All Down Even When the System Works Fine
Note: 434569.1 - OAM application dashbord shows all the web components with status down whereas they are up
Note: 287415.1 - Host Status In Application Dashboard Overview Tab Shown As Down in OAM
Regards,
Hussein

After change port for TCPIP PORT for default SQL Server instance (MSSQLSERVER), sql service and sql agent service did not started again

Hi
-when i install default instance MSSQLSERVER i added a domain account as a service account,
- when i change port for TCPIP PORT , and after sql service and sql agent service did not started again.
it thrown error
The SQL Server (MSSQLSERVER) service failed to start due to the following error:
The service did not start due to a logon failure.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
but when i add domain\sqservice account in administrators group these services started,
1) here why this change behavior happened
2i changed the port 1500
adil

HI
the sql instance service is running with domain/sqlservice account ,
- i stopped the sql service service
- when i start it not started again and i found below error message
Domain and account: MOJPORTAL\spsqlservice
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this.
If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed,
check with your domain administrator to find out if a Group Policy object associated with this node might be removing the right.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7041</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-04-24T17:12:58.326973300Z" />
<EventRecordID>2177</EventRecordID>
<Correlation />
<Execution ProcessID="520" ThreadID="4044" />
<Channel>System</Channel>
<Computer>PORTALSQL1.mojportal.com</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">MSSQL$xSQL</Data>
<Data Name="param2">xxxL\spsqlservice</Data>
</EventData>
</Event>
adil

Change port 50001 to 443

Similar Messages

Maybe you are looking for