Change process chain...

Hi Gurus,
I have a process chain in dev which I transported to prod. Now I want to make changes to the process chain. Can you please explain the procedure that I should follow?
Thanks
NewBW

hi Newbw,
you can do changes in dev, system will prompt change request, use the request to be imported in target system (se09/10, STMS).
hope this helps.

Similar Messages

How to change process chain in SAP APO, in RSCP tcode.

HI SAP APO Experts
I am from SAP ABAP background, I need to change a 'AND' operator in process chain in RSCP tranaaction in SAP APO.
I dont have any idea how to change process chain.
Could you please help me how to change process chain in SAP APO in RSCP tcode.
Appreciate your help or comments.
Sandeep..

Hi Sandeep,
The t-code RSCP does not exist in SAP APO. The correct t-code is RSPC.
Step 1:- In RSPC t-code, select the process chain which you need to change.
Step 2:- Double click on it.
Step 3:- It will display the various programmes attached to the process chain. Go to change mode by clicking on the change indicator (Control + F9)
Step 4:- Select the programme area where you need to do the correction or change. Double click on it.
Step 5:- It will take you to the programme and its selection contents. Make the relevant changes. You can directly carry out the change in se38 also if there is variant kind of changes for that particular programme.
Step 6:- Once the changes are done, save the changes and press F3 button which will take you to the home page of the process chain
Step 7:- Save again so that the change in the programme alongwith the process chain will get saved.
Regards
R. Senthil Mareeswaran.

Changing Process Chain in DEV

Whats the best practice to change a process chain to add couple of process. The process chain exist in both Dev and prod. Should I transport it from prod again and make the changes ?

Hi rvn,
If the process chain has been transported form Dev to Prod, then you need to make the changes in Dev and move the same to Prod. If the process chain has been created directly in Prod then you can edit it in Prod too.
In our system we create and maintain the chains directly in Production.
Hope this helps...

Change Process Chain Owner

Hi Experts!
I would like to change the owner of several process chain and I just wanted to know if someone know if this is possible and how I can do it.
Thanks a lot.

Hi,
se03 > change object directory entry > R3TR RSPC [your proces chain name] > execute > double click the object > come out screen, there is 'person responsible', change and save.
Regards,
Senthil

How to change process chain description

when i am creating the process chain the word "New:" (Eg : New: SPL Load Daily Night) is added to custom description,How delete the "New: "
Can any body help in this regard.
Thanks,
Bala.

Hi,
If it is just about those that say New, then try what Dinesh has suggested...See this thread for details:
Re: Assign Process Chain name to Application Component
Hope this helps...

How to change source system in process chain

Hi All,
In our Bw quality system, process chain is pointing to the Production system ,
I want to keep the process variant name same as production but want to change the source system
For example.. let us say currently process chains(All DTPs) are pointing to the Production server (PD001) ip (200.12.23.22)
now i want to keep the Server name same but want to point it to the quality system..so after change Process chain will show same name but it should point out to quality system.(let us say bwq 200.12.23.232).
Can you please help me on this

Hi Pravender,
In our BW system , we have same process chain in all the system (Dev, Quality and production)..and naming convention is also same ..(all process chain points to Production system only)..
So when I want to load data from development i just need to change the source system ip adrress to the Development Server (So names in process chain will indicate production but it will point to the development server), .
I want to know how can i change the source system mapping.
Hope i am clear now

Process Chain Status Red, DTP status yellow, DTP is green from inside

Hello All,
I have a problem where the Process Chain status is red, but the process(DTP) status is yellow.
When I right click on the yellow process there is no error message and the DTP is green in Process Monitor.
But the chain did not complete and the rest of the process steps are grey.
After 20 minutes the Process Chain ran again(automatically after new data arrived) and this time without errors and it went green.
My question is, how to proceed with the red Process chain and complete the further process and make it green.
Regards
Alex

hi,
There are scenarios where you need to change status of a process chain or a particular step in process chain.
You might need to change the status in the cases where we need mark these steps successful so that dependent steps get processed. There are other scenarios where one needs to change the status of a single step in the process chain or status of whole process chain.
Step by step instructions on change process chain status
1. Right click on the failed step in the process chain monitor and go to displaying messages
2. Go to u2018Chainu2019 tab and note down variant, instance and start date
3. Go to SE16 and the table RSPCPROCESSLOG and enter variant, instance and start dates from step 2 and note down log_id, type, variant, instance.
4. Go to SE37 transaction and execute the function module RSPC_PROCESS_FINISH and enter the values from step 3 and enter the new status u2018Gu2019 in status field and execute the FM
5. This sets the status of the process chain (PC)
After you set the status using the FM, go to the monitor screen of the process chain, you will notice the changed status. Now dependent steps in the process chain will start running
Thanks

Issue in process chain with DTP after imported to production

Hi,
we have a issue with process chain.
after transportation DTP technical name is differ in prod and dev. process chain is went inactive.
i have read some related threads, i'm not find any suitable solution for this.
we don't have access to change process chain(they are not willing to open prod system)
could you please provide solution on this issue .
Thanks,
EDK....
Edited by: EdK666 on Oct 21, 2011 2:54 PM

Hi,
I have observed the behavior of changing technical name for DTP but still I think your process chain should not become inactive due to this. I think process chain somehow adjust the new technical name but anyways you should be able to change the DTP in process chain directly in production system.
If that is not possible you can just try re-transporting it.
Regards,
Durgesh.

Transport process chain to production

Hi,
i changed process chain in dev system and transported to QA. What i did is created a request then goto se09, select the request and click on release. Now i went to QA system then goto STMS tcode. double click on Quality system and then selected the request and click on import. Now the request is imported to quality. Everything is fine.
Now i want to put the same in Production system. So what is the process?
Is the below process is correct?
Goto Production system>goto STMS>double click on Production system-->select the request and click on import.
OR
Goto Quality system>goto STMS>double click on Production system-->select the request and click on import.

Hi prasad,
The procedure is same as you have adopted in quality.
but the option raised by u seems to be same.
Goto Production system>goto STMS>double click on Production system-->select the request and click on import.
OR
Goto Quality system>goto STMS>double click on Production system-->select the request and click on import.
regards,
mahendra

Loading from PSA with different process chains at a different time

Hi,
We currently have an issue regarding loading the same data from 2 separate Process Chains from the same datasource at a different time.
Simplified what is happening :
Process Chain 1:
Step 1a = Load 2LIS_13_VDITM into ODS "A"
Step 1b = Load 0FI_GL_4 into ODS "B"
At a later time, (PC1 is ready) =>
Process Chain 2:
Step 1 = Load ODS "A" to ODS "C"
Step 2 = Load 0FI_GL_4 (from PSA) to ODS "C"
Because of dependencies, step 2 from PC2 has to be loaded AFTER Step 1 (with activation) from PC2.
We cannot change Process Chain 1.
What i want to do is load the data from 0FI_GL_4 only to PSA in Process Chain 1 and pick it up again in Process Chain 2. This functionality is available in NW2004S, but not in our version BW 3.0B.
Does anyone have an idea how to do this ?
Thanks,
Pascal

Hi Dinesh,
Thank you for your quick answer.
The problem is i cannot change PC1, but 0FI_GL_4 is loaded with the option into PSA and then immediatly to the target. So data is available in the PSA.
When I try to load data from PSA into ODS "C" in PC2, i get an error saying that the belonging infopackage (from PC1) is not available in this PC and thus cannot be loaded from PSA.
Regards,
Pascal

Transport error in process chain

Hi to all,
    Could someone help me out on my problem? I changed process chain in and request for transport. but am getting errors when I transported them.
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain ZOA_PC12A_TR_SRV_REP was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC12A_TR_SRV_REP Was Activated And Scheduled
Version 'M' of chain ZOA_PC12B_TR_SRV_REP was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC12B_TR_SRV_REP Was Activated And Scheduled
Version 'M' of chain ZOA_PC12_TR_SRV_REP was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC12_TR_SRV_REP Was Activated And Scheduled
Version 'M' of chain ZOA_PC3C_D_ATTR was saved without checking
Error in remote call of destination P23BW Chain ZOA_PC3C_D_ATTR Was Activated And Scheduled
Version 'M' of chain ZOA_PC5_M_ATTR was saved without checking
Error in remote call of destination P23BW Chain ZOA_PC5_M_ATTR Was Activated And Scheduled
Version 'M' of chain ZOA_PC92_INIT_TXN was saved without checking
Error in remote call of destination P23BW
Chain ZOA_PC92_INIT_TXN Was Activated And Scheduled
Can someone tell me what am i going to do next? thanks
Regards,
jasper

Hello again,
My problem is resolved. I am in SP17 and I applied a few SP18 notes:
0001002791
0001077030
0001139653
0001147587
0001147766
I then re-transport the request with the DTP and process chain. The expected result is the dtp in the process chain should be pointing to the new dtp. CHeers.
HWS
Edited by: Ho Wei Siong on Aug 14, 2008 3:35 PM

Changes are not getting reflected in Process Chain after changes.

Hello,
I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
I need some suggestion on this.
Regards,
Sanjay

Hi Sanjay.......
R u in Display mode..........click on Change mode...........
If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
U can try activating it manually or re-transport the active version..........
Regards,
Debjani......

Process Chain changing start time?

hi guysm i have 76 process chains that run every day in BWD system, so i removed all the timings from the start variant and in the infopackages, but it seems some process chains are still running, i did do the following steps on chnaging the time from a particular time to immediate, Save, Check and activate, i didnt schedule it as i dont want it to load right away .
do i have to hit check , save , schedule once i change the time from a particular time to immediate load or activate will work as well.?
what else could be the cause of process chains still loading even there are no events, or time given to any process chains at all.
i went to sm 37 and i can see the bi process are all running at the time they were orignially set up on.
so any suggestions would help,
is there any way from sm 37 i can tell which process chain is triggered off?
thanks
Dante(devils never cry)

Dante, the start conditions on the infopackages do not affect when they run in process chains. The process chains have their own start job. If you want to change the start time of a process chain, then you need to go to maintain the process chain, right-click on the Start process and select Displaying Scheduled Job(s)... . Here you will see a job called BI_PROCESS_TRIGGER. Change the start conditions of this job.
The start job for all process chains is BI_PROCESS_TRIGGER, so using SM37 may be difficult to identify which BI_PROCESS_TRIGGER job is associated to a particular chain.
Also, to let you know, each process in a process chain has an associated job. All jobs called BI_PROCESS_xxxxx are jobs associated with a process chain.
Eg.
BI_PROCESS_LOADING is an infopackage.
BI_PROCESS_TRIGGER is the start job
Does this help?

Error while Transporting changes in Process chain

Hi All,
I have added a Hierarchy InfoPackage in Process chain and added this InfoObject in Save hierarchy and Attribute change Run Process types.
My transport Request is showing only three entries each for
save hierarchy , attribute change run and one for Process Chain.
Now when I transport this changes to Process chain to Acceptance its showing Error message in Acceptance as
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
Process variant LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 does not exist in version A
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
InfoPackage   no longer exists in object version A in table RSLDPIO
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
Variant 'ZPAK_4AY55YMC1H454OQWJUBNJCYE9' of process type 'LOADING' not found in A version
Errors occurred during post-handling RS_AFTER_IMPORT for RSPC L
The errors affect the following components:
   BW-WHM (Warehouse Management)
My question is , Why the Transport request is not transporting the InfoPackage.
Is there any solution for this?????
Thanks in Advance
Best Regards
Pratap Sone

Hi Pratap,
       The infopackage has not yet been assigned to a package in all probabilty. Change the package and then transport the IP and then transpost the process chain request.
Regards.
Edited by: Ansel D'Souza on Sep 8, 2008 7:31 AM

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

Change process chain...

Similar Messages

Maybe you are looking for