Changing Process Chain in DEV

Whats the best practice to change a process chain to add couple of process. The process chain exist in both Dev and prod. Should I transport it from prod again and make the changes ?

Hi rvn,
If the process chain has been transported form Dev to Prod, then you need to make the changes in Dev and move the same to Prod. If the process chain has been created directly in Prod then you can edit it in Prod too.
In our system we create and maintain the chains directly in Production.
Hope this helps...

Similar Messages

  • Change process chain...

    Hi Gurus,
    I have a process chain in dev which I transported to prod. Now I want to make changes to the process chain. Can you please explain the procedure that I should follow?
    Thanks
    NewBW

    hi Newbw,
    you can do changes in dev, system will prompt change request, use the request to be imported in target system (se09/10, STMS).
    hope this helps.

  • How to change process chain in SAP APO, in RSCP tcode.

    HI SAP APO Experts
    I am from SAP ABAP background, I need to change a 'AND' operator in process chain in RSCP tranaaction in SAP APO.
    I dont have any idea how to change process chain.
    Could you please help me how to change process chain in SAP APO in RSCP tcode.
    Appreciate your help or comments.
    Sandeep..

    Hi Sandeep,
    The t-code RSCP does not exist in SAP APO.  The correct t-code is RSPC. 
    Step 1:- In RSPC t-code, select the process chain which you need to change. 
    Step 2:- Double click on it. 
    Step 3:- It will display the various programmes attached to the process chain.  Go to change mode by clicking on the change indicator (Control + F9)
    Step 4:- Select the programme area where you need to do the correction or change.  Double click on it.
    Step 5:- It will take you to the programme and its selection contents.  Make the relevant changes.  You can directly carry out the change in se38 also if there is variant kind of changes for that particular programme.
    Step 6:- Once the changes are done, save the changes and press F3 button which will take you to the home page of the process chain
    Step 7:- Save again so that the change in the programme alongwith the process chain will get saved.
    Regards
    R. Senthil Mareeswaran.

  • Process chain in dev

    Hi
    I have created a process chain for master data connecting Infopackages, DTP and attribute change run.
    data is loaded through flat file for the infopackage and working fine.
    when i activate and schedule the process chain, for the master, it gives me an error
    "upload from client workstation in background is not possible". I am in Dev, in order to test the process chain, do i need to save the flat file in the application server
    Production Server, yes, the flat files have to be saved on App Server.
    Please guide so that i can schedule the procsss chain successfully.
    Regards

    Hi ,
    yes you need to save the flat file on the that application server ..if you are laoding thorugh process chain
    check this link
    Flat file load for process chain from workstation
    regards,
    shikha

  • How to transport process chains from dev to quality ?

    I have developed few ip s ,dtp s , transf etc for few iobj. Few are available and few are not in Q. I know if all are available how to move a pc but in this case, what is the best approach to move all the respective objects related to that pc into Q.
    I mean do i have to manually verify what is available in Q and then move the missing dtp,ip,tran etc first ...and then move the pc or..... I can just send the respective dtp,ip ,tran etc while transporting the PC. That is my doubt.
    I have many objects (dtp,ip,trans)and almost 20 pc need to be moved to Q   .Experts, Please suggest the best approach.
    Thanks,

    Thanks Jaya. Can you please tell me what do you mean by ...first the objects and the process chains need to be moved..... anyway we are moving the objects along with the process chains rite, ..do you mean if anyother obj is locking the obj which is needed for this pc .....for ex I have global_data and I have selected that chain and put necessary obj.
    Its showing the chain after collecting the objects. Now do i have to change it to before and after and make the dispaly to list and then compare the obj from Q which are not existing .....and then check or uncheck the respective objects which are not existing and then transport it.
    Can u pls tell me if I am doing right ?
    Edited by: Daniel on Dec 12, 2011 10:10 AM
    Edited by: Daniel on Dec 12, 2011 10:12 AM

  • How to move process chains from dev to production

    Hello,
    I almost finish testing proces chain on my davelopement system and now want to move it on production system.
    I have heard that transporting PCs between systems can be problematic.
    What should I take care of and do I need to perform any additional steps when doing this.
    I have read somewhere that buiding chain manually on example of davelopment one is good solution. Is it true?
    Thanks in advance for response,
    Andrzej

    You can set the object changability flags to allow you to make mods to either of three major components of process chains:
    1.  Process chain - lets you change the chain
    2.  Process starter - lets you change the start process
    3.  Process variant - lets you change process variants
    Go to the admin workbench and select transport.  Find the changability options in the upper right portion of the screen and set the process starter to everything changeable.  Leave the other set to changable original or set to no changes to lock that portion down.
    That should get you around your current issue. 
    As an added check, us table RSPCCHAIN to figure out if the whole chain is ready and active for migrating.  Plug in the chain technical name and set the version to A and if the number of entries matches the number of processes all processes are active and ready to be migrated.

  • Change Process Chain Owner

    Hi Experts!
    I would like to change the owner of several process chain and I just wanted to know if someone know if this is possible and how I can do it.
    Thanks a lot.

    Hi,
    se03 > change object directory entry > R3TR RSPC [your proces chain name] > execute > double click the object > come out screen, there is 'person responsible', change and save.
    Regards,
    Senthil

  • How to change process chain description

    when i am creating  the process chain the word  "New:" (Eg :  New: SPL Load Daily Night) is added to custom description,How delete the "New: "
    Can any body help in this regard.
    Thanks,
    Bala.

    Hi,
    If it is just about those that say New, then try what Dinesh has suggested...See this thread for details:
    Re: Assign Process Chain name to Application Component
    Hope this helps...

  • Transport process chain to production

    Hi,
    i changed process chain in dev system and transported to QA. What i did is created a request then goto se09, select the request and click on release. Now i went to QA system then goto STMS tcode. double click on Quality system and then selected the request and click on import. Now the request is imported to quality. Everything is fine.
    Now i want to put the same in Production system. So what is the process?
    Is the below process is correct?
    Goto Production system>goto STMS>double click on Production system-->select the request and click on import.
    OR
    Goto Quality system>goto STMS>double click on Production system-->select the request and click on import.

    Hi prasad,
    The procedure is same as you have adopted in quality.
    but the option raised by u seems to be same.
    Goto Production system>goto STMS>double click on Production system-->select the request and click on import.
    OR
    Goto Quality system>goto STMS>double click on Production system-->select the request and click on import.
    regards,
    mahendra

  • Change on process chain not visible in display mode after transport

    All,
    We have changed a process chain where message notification was active in development.
    We have deleted the notification and created a transport. This has been released and implemented into the QA system without a problem.
    When displaying the new process chain in QA the change was not visible. But in change mode it is.
    Can anyone tell us what might be a cause/solution for this? Also for future changes.
    Gui error??
    Thanks in advance.

    hi,
    Try activating the PC again in the QA.
    if still it does reflect the message notification, then try creating the request again
    in DEV and transport.
    make sure you r out of the Process chains in DEV nad QA when transport happens.
    This is just a practice.
    Regards,
    Dhanya.

  • How to change source system in process chain

    Hi All,
    In our Bw quality system, process chain is pointing to the Production system ,
    I want to keep the process variant name same as production but want to change the source system
    For example.. let us say currently process chains(All DTPs) are pointing to the Production server (PD001) ip (200.12.23.22)
    now i want to keep the Server name same but want to point it to the quality system..so after change Process chain will show same name but it should point out to quality system.(let us say bwq 200.12.23.232).
    Can you please help me on this

    Hi Pravender,
    In our BW system , we have same process chain in all the system (Dev, Quality and production)..and naming convention is also same ..(all process chain points to Production system only)..
    So when I want to load data from development i just need to change the source system ip adrress  to  the Development Server  (So names in process chain will indicate production but  it will point to the development server), .
    I want to know how can i change the source system mapping.
    Hope i am clear now

  • Process chain transport in BI7.0 from DEV system to PROD system

    Hi experts,
    I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
    1) create the same process chain in Production system directly or,
    2) should i transport the same process chain to production system, i created in the development system.
    and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
    thanks in advance for all your expertise experienced help.

    It is always advisable to transport the process  chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
    During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
    Hope this is clear now.

  • Process chain - Two source system issue

    Hi Experts,
    I face problem when i transport a process chain from BW DEV to Quality.
    I have two source systems in Quality ECI and EXS.EXS is a sandbox server(Source system) which we no longer use.
    When i transport the process chain from DEV to QA, i get two DTP's automatically added to Process chain in quality for two source systems ECI and EXS whereas i do not want the data to be loaded from EXS client.
    I checked the BW dev system, it has only one DTP in the process chain.
    Now I want to elminate the other DTP in the process chain in quality.
    Please suggest.
    Regards,
    Srini

    I Dont think so a DTP for EXS system has got created automatically when you transport the PC to QA (which actually doesn't exist in DEV).
    Please check you DEV system once again, there might a DTP from EXS system also.. other wise go the Release TR and then check the contents-->iif you find two DTP's there then it is there in the dev system..
    Any ways if you want to delete the other DTP from the PC in QA.. you can Delete it directly from the PC itself.. Goto change mode of the PC and then select the DTP which you want to delete-->then right click and hten Click on Remove Process -->then activate the PC..
    Note: You might have authorization to edit the PC in QA then only you will be able to do the changes..

  • Basis Setting for Process chains

    Hi
    Can you please let me know what is the basis setting that needs to be done..
    Not to Prompt while creating an process chains in Quality and Production system.
    Thanks
    Kiran

    Kirun,
    In QA  & Production system client setting should always be closed(No changed allowed)
    SCC4>Clinet setting>No Changes allowed
    SE06>System Change option>Not Modifiable
    You should create a process chain in DEV system  & then transport it in QA & Prod.
    Hope it helps.
    Thanks
    Sushil

  • Issue in process chain with DTP after imported to production

    Hi,
    we have a issue with process chain.
    after transportation DTP technical name is differ in prod and dev. process chain is went inactive.
    i have read some related threads, i'm not find any suitable solution for this.
    we don't have access to change process chain(they are not willing to open prod system)
    could you please provide solution on this issue .
    Thanks,
    EDK....
    Edited by: EdK666 on Oct 21, 2011 2:54 PM

    Hi,
    I have observed the behavior of changing technical name for DTP but still I think your process chain should not become inactive due to this.  I think process chain somehow adjust the new technical name but anyways you should be able to change the DTP in process chain directly in production system.
    If that is not possible you can just try re-transporting it.
    Regards,
    Durgesh.

Maybe you are looking for

  • ICloud Nightmare

    I have a problem with Apple's iCloud. It all started a few months ago when a friend recommended my mom to activate the iCloud Sync on her iPhone. The friend, trying to be helpful, activated the automatic iCloud Sync to the existing iTunes account she

  • Error In MIRO GL  account allows only output tax

    Hello All, We are facing an error in MIRO that GL account xxxxx allows only out put tax. The scinario & settings are as  below. FB60 There is no error when using the particular tax code sytem posts the document MIRO Same vendor & tax code used as in

  • Want to create a InDesign document that is Interactive as a PDF

    I want to create an InDesign form that is made into a PDF that can be filled out (populated with their answers) and returned via email to someone. Can I make the document in InDesign or do I have to do it in Acrobat? I am running CS2. If you can poin

  • Microsoft Project Error Message when Saving

    "You cannot lock or delete the last unlocked column in a table" is the error message I get every time I save my Microsoft Project 2007 Schedule. I sent the schedule to someone else, he sent it back, and now I get this message every time I save the Sc

  • Email PO as a PDF  document to Buyer-Purchasing Group

    Hi MM expert, is it possible to send an Email to Buyer (Purchasing group) as a PDF Document once we create the PO if yes Please let me know the Custamization settings Thanks in advance Priya