Change Published Replenishment Order

Hi,
I'm implementing SMI scenario with SAP SNC 5.1. I was traying to change a Published Replenishment Order, to do this i have:
Created and published a Replenishment Order in SNC Web UI -> The Purchase Order is correctly created in customer Backend system (ECC).
Allowed supplier to change published ROs
Changed and re-published the Replenishment Order in SNC Web UI -> The idoc incoming in Customer Backend system, to change the PO, is in error:
The material number for item 000001 could not be identified
For the PO changes, SNC send to PI the VendorGeneratedOrderNotification.XML, PI converts it in to the ORDRCHG.ORDERS05.
In customer backend system (ECC) I've set the Inbound parameters as follow:
Message type: ORDCHG
Message Code: SMI
Process Code: ORDC
I've tried also with Message Code "EF" or blank but these cases the error will be:
EDI: Partner profile inbound not available
Am I doing wrong something? Where I did a mistake?
Thank you in advance for your support.
Edited by: PTP Team Consultants on Jan 24, 2012 11:42 AM

Hi PTP
First of all Process Code: ORDC is to change sales order
Secondly, Why the business allows supplier to change published RO?
If there is a change that is always performed by supplier, then please do not publish VGON xml to customer system. Wait for confirmation of Sales order from Supplier and then trigger VGON xml to customer system, that would be the best practise to follow
I do not know how this works, have you tried not maintaining any ORDCHG MESSAGE TYPE
Like you were saying
Created and published a Replenishment Order in SNC Web UI -> The Purchase Order is correctly created in customer Backend system (ECC).
This is taken care by inbound parameter
Message type: ORDRSP
Message Code: SMI
Process Code: ORDS
Is it not taking care for the changed xml?
Regards
Vinod

Similar Messages

  • Replenishment Order Details

    Hi All,
    I am new to SNC, I have some requirement related to SNC replenishment order.
    requirement:
    1) Need to display list of SNC replenishment orders on the basis of Customer number and Date. Please let me know which tables to look to fetch these details,
    and
    is there any BAPI or FM to fetch these details.
    2) if user make any change in the replenishment order ,then need to update the changes in replenishment order, Please let me know how to do that too.
    Thanks in Advance.
    AB

    Hi,
    Make sure you have proper authorization.(sometime system does not display the error but user don't have authorization to create/update/modify table entries to be on safer side assign SAP_ALL profile to your ID if it is allowed as per your company security process).
    I think issue is with InfoObject 9ALOCID is not activated properly.
    You need activate  InfoObject 9ALOCID as mention i below step2 but it is better you follow below steps.
    1) Then force generate ODM.
    2)Go to transaction code:/N/SCA/TSDM09 enter time series DFC01 and select  Radio button Activate Planning object Structure.
    Regards,
    Nikhil.

  • Restrict manual change in sales order with respect to quotation

    Hi All,
    The user use to create sales order with respect to quotation.  The user can able to change pricing as well as some header and item fields.  How can I restrict user for manual change in sales order expect some specific fields.
    Thanks.

    Hi Sunil,
    It is possible through configuration better you can post in sd forums.
    For the condition type settings , ensure that the manual entries is 'D'. it wont allow any changes in the order.
    Regards,
    Madhu.
    Edited by: madhurao123 on Aug 1, 2011 1:08 PM

  • Report on changes to sales orders

    Hi Experts,
    I am looking for a way to report on changes to sales orders, specifically the row shipping date and quantity.
    I can see that the data is apparently in tables ADOC and ADO1 but am having trouble getting useful results. What I need is a report that, for sales orders only and for a date range, shows all changes to row quantities or row shipping dates. The type of output that would be useful is:
    Change date  - document # - row# - Item code - old shipping date - new shipping date - old qty - new qty
    filtered on change date for sales orders only. This seems beyond my preferred option of XL-Reporter and I'm getting lost in the history tables in creating a query.
    Best Regards
    Matthew

    Hi,
    Without doing the query for you, history tables are linked as the "normal" table but with the addition of the LogInstance column. Then the UpdateDate column (from base table ie. ADOC) will tell you when it was changed.
    Your query isn't an easy one... SInce you have to link an instance (ie. LogInstance = 1, which will be the original created object) to all the modified ones.
    Regards,
    Eric

  • Creation of replenishment orders in RR monitor

    I am not being able to create a replenishment order on the basis of
    already created planned receipt by running the service
    (REPL_FRPROP_SERVICE) interactively.
    Following are the errors that I have been getting
    1.Technical error in Firm Receipts generation, results are not complete
    2.An exception has occurred in scheduling
    This is required by me for running deployment as deployment takes
    the replenishment orders and not the planned receipt into account.
    Early reply on the same will be appreciated
    Thanks
    Ash

    did you setup VMIPLANNING as your scheduling schema, and defined it?
    J.

  • I have three email accounts and want to know how to change the display order.

    I have three email accounts and want to know how to change the display order.

    Install this add on.
    https://addons.mozilla.org/en-US/thunderbird/addon/manually-sort-folders/?src=search

  • How do I synch photos from my PC to Ipad2 without a change in the order of the photos?

    I am not able to synch photos from my PC to Ipad2 without a change in the order of the photos. I ordered them by date so thought there would be no problem. What can I do to solve this problem?

    A better solution in windows is set up folders and organize your pictures that way.  That will be similar to events that iPhoto uses. That way the pictures will stay in an organized fashion for you.
    I use a mac and iPhoto and the pictures are organized by events.
    Good luck.

  • How do I change the chapter order in itunes 11.0.4?

    How do I change the chapter order in itunes 11.0.4? The book chapters used to look like the playlists in music. You could ;change how it was sorted by the name time, artist etc. Now there isn't a catagory label and the background is the same color as the background of the book photo.

    Trent o
    Someone else in the forum told me how to do this.  If you have Onyx on your system then select Parameters, iTunes and turn off high contrast mode.  If you don't have Onyx, I'd suggest getting it.  It is freeware and used to help maintain your system.  Good luck
    Paul

  • Is it possible to change the dimension order when extracting data from HFM?

    Hello,
    When accessing Consolidation/Extract/Data is it possible to change the dimension order of the extract rather than extracting the standard order?
    I can see you can change the dimension order visually by going to "Reorder dimensions" but this does not carry through to the actual extract.
    If its not possible using this method is there another method? Trying to avoid using smartview for this purpose.
    Many thanks and kind regards,
    Rich

    Hi,
    No, it is not possible to change the order type.
    -Paul

  • All changes in sales orders with in a week

    Hi gurus,
    I want to display a report to display all the changes in sales orders with in a week,
    Can anybody help me .If anybody already developed this report can you send to me.
    regards,
    D..

    Query table CDHDR and CDPOS with the following fields:
    CDHDR-TCODE = VA01 or VA02
    CDHDR-UDATE = <specified date range>
    Now select from CDPOS where
    CDPOS-OBJECTCLAS = CDHDR-OBJECTCLAS
    CDPOS-OBJECTID = CDHDR-OBJECTID
    CDPOS-CHANGENR = CDHDR-CHANGENR
    The rest of the details for the change can be found from the other fields in CDPOS. like tablename, fieldname, old value, new value etc.
    Hope this helps.
    Sudha

  • How to restrict the user from making any changes in Sales order- item level

    Hi to all
    How to restrict the users from making any changes in sales order at item level if the same sales order is released by senior user through status profile.
    Regards
    Anish Parikh
    Edited by: anish parikh on Jan 24, 2008 5:16 AM

    Hi Anish,
    This can be achieved through the roles and authorization.
    This can be done through the basis team. they can create user profiles and roles.
    For the roles they assign some transaction codes so that they can view the only assigned tr. codes.
    Like that ur requirement can be done.
    Also u can prevent the user to change any fields in the sales order screen (VA02). for that please modify the authorisations.
    Hope i answers.
    Reward points if useful.
    Edited by: kaleeswaran bhoopathy on Jan 24, 2008 9:57 AM

  • How to restrict header text changes in sales order level

    Dear Experts,
    how to restrict header text changes in sales order level change mode
    thanks

    Hello Chandu,
    how to restrict header text changes in sales order level change mode
    In order to restrict changes to Sales Order Header Text, the appropriate User Exit would be USEREXIT_MOVE_FIELD_TO_TVCOM_H. With the help of ABAPer, you can include the simple logic on the basis of Header Text type such that whenever any changes are incurred on the Sales Order header text, updates would be prevented.
    Please try out this approach and let us know your latest observation on this issue.
    Regards,
    Sarthak

  • Find the user exit while creation and change of sales order

    Hi Team
    Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
    u2022     The logic for the user exit to explode should consider the following assumptions and validations
    o     Customer master to have the entry at KNVV-KVGR1
    o     Material master to have the entry at MVKE
    o     UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
    o     Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
    for example :-->
    Product A with Scales mentioned below
    Product A     Quantity / Scale     UoM     Price(£)
         0-10     PAL/TES     20
         11- 20     PAL/TES     10
         21- 30     PAL/TES     5
         31-40     PAL/TES     2.5
         >41     PAL/TES     
    Product B with Scales mentioned below
    Product B     Quantity / Scale     UoM     Price(£)
         0-15     PAL/TES     25
         16-20     PAL/TES     20
         21- 30     PAL/TES     15
         31-40     PAL/TES     10
         > 41     PAL/TES     5
    u2022     Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
    u2022     The expected results should be
    o     Product A qty 10 + B qty 15 added = 25Pal
    o     The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
    Thanks in Advance.
    Puneet.

    Hi Team
    Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
    u2022 The logic for the user exit to explode should consider the following assumptions and validations
    o Customer master to have the entry at KNVV-KVGR1
    o Material master to have the entry at MVKE
    o UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
    o Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
    for example :-->
    Product A with Scales mentioned below
    Product A Quantity / Scale UoM Price(£)
    0-10 PAL/TES 20
    11- 20 PAL/TES 10
    21- 30 PAL/TES 5
    31-40 PAL/TES 2.5
    >41 PAL/TES
    Product B with Scales mentioned below
    Product B Quantity / Scale UoM Price(£)
    0-15 PAL/TES 25
    16-20 PAL/TES 20
    21- 30 PAL/TES 15
    31-40 PAL/TES 10
    41 PAL/TES 5
    u2022 Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
    u2022 The expected results should be
    o Product A qty 10 + B qty 15 added = 25Pal
    o The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
    Thanks in Advance.
    Puneet.

  • How to trigger workflow from changes in Sales Order in CRM?

    Hi Experts,
    I want to trigger event at the time of saving the changes in sales order (TCODE- CRMD_ORDER).
    I have found one BO - BUS2000115 but it is getting triggered only after new creation of sales order.And there is no BO available when we change the sales order.For this reason I have created one customize event in BO(BUS2000115).
    Now my question is How should I link this customize event so that it will trigger after saving the changes ?
    I have seen SWEC transaction but was not able to find anything to link this customize event.
    Please help ....!!!
    Good response will be rewarded.
    Thanks
    Snehasish Das
    Edited by: Snehasish Das on Feb 14, 2008 2:31 PM

    In SWEC, actually you link the change document object to a Business object and its corresponding event , to which workflow should react to.
    If yo udo not find the entry then, yo unedd to create one with finding out the respective chage documnet object.
    Hope that helps.
    Regds,
    Akshay

  • !!!How to restrict user for making  changes in Sales order , partner level

    Hi all,
    Can anybody tell me how to restrict user for making  changes in Sales order  at partner level, is it through user exit?

    Hi Ruchi
    I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
    Hope its clear
    Reward if help ful
    Sri

Maybe you are looking for