Change rolling time in DailyRollingFileAppernder (log4j 1.3)

Hi all,
We are using log4j 1.3alpha8 and have a RollingFileApppender configured with the following rolling policy:
<rollingPolicy class="org.apache.log4j.rolling.TimeBasedRollingPolicy">
     <param name="FileNamePattern" value="../../../log/logfile.%d{yyyyMMdd}.log.gz"/>
</rollingPolicy>This means the log file will roll daily at midnight.
How can we change the rolling time, so that the file will roll daily at, let's say, 2am?? Couldn't find anything yet, maybe someone's got a solution.
Thanks
Jonas

This appears to be an issue affecting most versions of Safari from about version 5 onwards.
I recently experienced it with Safari version 5.0.6 and eventually found a fix adequate for my purposes.
1 - Sometimes simply selecting 'Private Browsing' (on Safari menu) and then deselecting it cures the problem.
2 - If that does not work I use the following Terminal command which has, so far, worked every time:
defaults write com.apple.Safari RegisteredSafariSyncClient -bool false
I must point out that I do not intend to use any sync services but it appears that if Safari gets confused it is necessary to use this command to reset its sync services.
3 - If you don't like using the Terminal command you could trash the following preference file although this more brutal approach is more likely to lose data:
~/Library/Preferences/com.apple.Safari.plist
Quit from Safari before attempting 2 or 3.
I have only tested the Terminal command on Safari 5.0.6 on a Leopard G4 without any user defined sync services but it will probably work on other versions and OSs. It is always safest to backup first.

Similar Messages

  • Change server time

    Hi to all,
    I have 10.2g database on a Windows Server 2003 in production.
    What would be the impact on the database if I change server time i.e. if I roll the clock backwards?
    My database server takes time from my DC server and I wont to roll the clock backwards on DC server.
    Thanks!

    871486 wrote:
    Hi to all,
    I have 10.2g database on a Windows Server 2003 in production.
    What would be the impact on the database if I change server time i.e. if I roll the clock backwards?
    My database server takes time from my DC server and I wont to roll the clock backwards on DC server.
    Thanks!The schedulers will be affected. I mean by the schedulers; Oracle defined schedulers (maintenance window, etc...) and user defined schedulers.

  • Can I switch calendars (Ex. "night shift" to "day shift" cal) with a repeating event, but ONLY for that one event??  It asks "for all events or only this event" if i change the time.  But it changes ALL events when i try and switch calendars.  Any help??

    I have 2 calendars set up for my work schedule, a "night shift" and "day shift" calendar.  I've set up repeating events fro Fri/Sat/Sun 3-11pm "night shifts" and Mon/Tues 7am-3pm "day shifts".  But lets say for example that I swap shifts and instead of working nights on Saturday like I normally would, I am now working days.  I want to change that in my calendar.  When I go to change the event, if i change the TIME it asks if i want to change all event or ONLY this event.  no problem....just this single event.  but when i go to change the event from the "night shift" calendar to the "day shift" calendar, it changes ALL the repeating events, and not just that one single event.   can anyone help with this???  am i doing something wrong?  is there a way to do this or not with the new iCal program???  i used to do this and never had any problems.    Thank you!

    You need to follow iPhoto terms since we only know what you tell us
    what are you calling folders - in iPhoto folders can not hold photos - albums hold photos and folders hold albums or other folders
    The basic default view of photo is by event (iPhoto '08 and later)
    Exactly what you you trying to do?
    LN

  • I can not change the time in activity Appointment in WebUi

    Dear Experts!
    I can not change the time in activity Appointment when creating: calendar -> month -> click on the day
    snapshot of problem:
    http://imglink.ru/show-image.php?id=e7a096115a6371ffab46c701f8e470ba
    When I create a Appointment (Activities -> Create Appointment) of all good:
    http://imglink.ru/show-image.php?id=ef65a38bdf7fc77eb9a71ec5c3ad5603
    Help me this problem?

    You need to add that attribute using the config tool for your view configuration. Select the attribute All Day from the context node BTDATE in the available fields to your display field and then save it. It should now be visible in your UI and now you can select or uncheck it to make the time field enable. Check the below image
    http://imglink.ru/show-image.php?id=a9a660778c0fee2b3fd7409d620eddc5
    Regards,
    Shobhit

  • CUCM 8.6.2 - IP Phone 7940/7960 don´t change the time when finish DST

    Hi Guys,
    My Customer is having the problem about DST (date summer time) specifically about IP Phone 7940 and 7960. When finish the date summer time this model don´t change the time, only after restart logical or phisical. I simulated the problem in the CUCM with the same version 8.6.2.22900-9 and the problem too occur. I did the following procedure to try solve the problem:
    1) Put the lastest version firmware about IP Phone and didn´t worked;
    2) Put the lastest version dst and didn´t worked;
    I search about any bug related and didn´t found nothing.
    Any have idea about this?
    Thanks,
    Wilson                  

    Hi Wilson,
    Try installing TZ updates with steps in the document:
    http://software.cisco.com/download/release.html?mdfid=283782839&flowid=45898&softwareid=282074298&release=8.6%282-2013d%29&relind=AVAILABLE&rellifecycle=&reltype=latest
    Please find the link for EOS and SW Maintenance for 7960
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/end_of_life_notice_c51-574072.html
    Hope this helps!!
    Regards.
    Tirtha

  • Process Chain changing start time?

    hi guysm i have 76 process chains that run every day in BWD system, so i removed all the timings from the start variant and in the infopackages, but it seems some process chains are still running, i did do the following steps on chnaging the time from a particular time to immediate, Save, Check and activate, i didnt schedule it as i dont want it to load right away .
    do i have to hit check , save , schedule once i change the time from a particular time to immediate load or activate will work as well.?
    what else could be the cause of process chains still loading even there are no events, or time given to any process chains at all.
    i went to sm 37 and i can see the bi process are all running at the time they were orignially set up on.
    so any suggestions would help,
    is there any way from sm 37 i can tell which process chain is triggered off?
    thanks
    Dante(devils never cry)

    Dante, the start conditions on the infopackages do not affect when they run in process chains.  The process chains have their own start job.  If you want to change the start time of a process chain, then you need to go to maintain the process chain, right-click on the Start process and select Displaying Scheduled Job(s)... .  Here you will see a job called BI_PROCESS_TRIGGER.  Change the start conditions of this job. 
    The start job for all process chains is BI_PROCESS_TRIGGER, so using SM37 may be difficult to identify which BI_PROCESS_TRIGGER job is associated to a particular chain. 
    Also, to let you know, each process in a process chain has an associated job.  All jobs called BI_PROCESS_xxxxx are jobs associated with a process chain. 
    Eg. 
    BI_PROCESS_LOADING is an infopackage.
    BI_PROCESS_TRIGGER is the start job
    Does this help?

  • How can I prevent the settings on iMessage from changing each time I sync the devices with iTunes on our iMac?

    Each time I sync an apple device (iPad, iPad mini, iPhone) with iTunes on our iMac the settings on iMessage and phone settings change. We use the same Apple ID and have different e-mail addresses and phone numbers; however, each time a device is sync'd on iTunes on our iMac, the iMessage settings and phone settings are changed so that we all each get each other's text messages and phone calls. After the device is sync'd/charged, I have to go into each device (all of them somehow update when only one is sync'ing) and re-set the settings to what we want. How can I prevent settings from being changed each time?

    Okay I've tried safe mode.  Let it run down to 98%, plugged it in, locked the screen, and waited.  A few minutes later, the screen came on showing the 100% icon at the top right, full battery icon just to the left of the time, 100% text to the left of that.
    I'm not going to do a hard reset until I have confirmation that this is not normal behavior for the phone because that's going to take hours of my time and gigabytes of data transfer to get all of my media and apps back on the phone and configured.
    After all my griping, I do have to give credit where it's due.  This phone is much more efficient than my Galaxy Nexus.  I left the S5 running in WiFi hotspot mode while on battery last night.  It still had over 50% left on the battery.  The Galaxy Nexus would be stone dead after about 4 hours.  I can live with that if I have to but I'd really rather be able to leave it on the charger at night.

  • How do I stop iCal from ever changing the time zones of my appointments?

    I cannot figure out time zone support in iCal, and just want it never to move the time of an appointment when I change time zones. I have tried switching time zone support on and off, and it makes no difference, the appointment times change when the time zone changes. It's infuriating! How do I make it stop?
    Thanks!

    Whitecity,
    According to iCal Help...Changing the time zone for an event: Choose iCal > Preferences, click Advanced, and select the "Turn on time zone support" checkbox...To change the event's time zone, choose a time zone from the pop-up menu in the Info drawer. To make the event appear at the same time no matter what time zone the main calendar view is in, choose Floating..;~)

  • How do I make a web page that changes every time the user refreshes it? Is it possible in Muse?

    Hi, i'd like to make quite a simple website where the main text in the centre of the page changes every time the user refreshes the page in their browser. I assume i'll have to make one master, and multiple pages that are all the same except for the changes in the text, but i'm not sure how to make it so that every refresh directs to a different page and not just the home page? Is this even possible in Muse?
    This is an example of what i'm going for: :: procatinator ::
    Thanks!

    You can't do it with Muse alone. Would probably be fairly simple to do with a bit of Javascript. Check the widget directory as it is possible someone has made a widget for random content. If not, maybe I will make one this weekend. ;-)

  • How to change system time w/o affecting iCal

    When I travel to another time zone with my laptop I would like to be able to change the system time that appears in the menu bar to the local correct time.  However, I do NOT want this to cause any changes in my calendar times.  I use Calendar only for my home appointments so do not want those to change.  Is this possible?  Thanks!

    Hey bobio,
    Thanks for the question. If I understand correctly, you want to change your time on the computer but not the time on the Calendar. I would recommend that you read this article, it may be able to help the issue.
    You can change the computer time and follow this to view Calendar events in your normal time. 
    Calendar: View all your events in a different time zone
    By default, Calendar events are displayed in your computer’s current time zone (set in Date & Time preferences). 
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • How to change system time through java program

    Hi
    I want to know, how to change system time through java program.
    give me a idia with example.
    Thanks

    There isn't any core Java API for this. Use JNI or call an external process with Runtime.exec().
    ~

  • How to change system time on Cisco MeetingPlace Express Server

    How to change system time on Cisco MeetingPlace Express Server
    Model MCS-7825-I4

    Hi Vijay,
    As per the install guide for MPX 1.x as well as 2.x "Caution! Be sure you enter the correct date and time. You must reinstall the Cisco Unified MeetingPlace Express operating system and application if you need to change the date or time of your server in the future."
    http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Express,_Release_2.x_--_Configuring_the_Cisco_Unified_MeetingPlace_Express_Server#Configuring_the_Cisco_Unified_MeetingPlace_Express_Server
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/meetingplace_express/1_2/english/installation/guide/iug/mpxinst3.html
    HTH
    Manish

  • Bugs? can't change the time ... Can't view all mail settings

    Am I the only one with this problem? I changed my iPhone with an I phone 3G.
    when I go to change the time... it sends me back to the main screen. same with mail settings. I am running on ver 2.1.

    Go to Settings > General > International > Region Format
    I selected United States and then was able to set my Date & Time no problem. What was interesting was that my region format was set to English but there is no option for English only UK or US. That's probably where the bug was.
    I found the answer here
    http://discussions.apple.com/message.jspa?messageID=8251783#8251783

  • Can't change stop time on song

    Hi all.
    I have a song recently purchased on iTunes that won't let me change the stop time. The actual play time for the song is 3:21, but it stops and goes to the next song, in iTunes, after 3:08. I am not having any problems with the stop time with the same song on my iPhone 4. I know how to chage the stop time of a song; I've done it many times before. But when I go to the options tab on the song, select the stop time check box, and change the time, then click OK, it beeps at me and the stop time goes back to 3:08.
    Please help!

    Can you confirm that you're -
    1 - selecting, then right-clicking a track
    2 - selecting Get Info in the context menu and then going to the Options tab
    3 - then using the mouse arrow to position the cursor in the Stop Time field
    4 - and then changing the entry in that field.
    If so, at what point does the problem occur?

  • I can't change the time on my Zen V P

    I got a Zen V Plus 4 GB for christmas. I'm just getting to know it but I dont know how to change the time. Its like 5 hours ahead. I just dont know how to do it. And the handbook doesn't really say. I also don't know how to change the wallpaper. I would like to change it but I just dont know how to. Can anyone help me?Message Edited by sunkiss54 on 0-29-200703: PM

    Knowledgebase article SID25966
    Jason

Maybe you are looking for

  • 2nd Monitor issue

    I've been using a 2nd Monitor (ViewSonic 1080p) with my MacBook for several years.  After recent upgrade to Snow Leopard, MacBook no longer recognizes the 2nd monitor in the Preferences.  Monitor/cables are fine and work with another laptop OK. Do I

  • The Job Failed Due to  MAX-Time at ODS Activation Step

    Hi         I'm getting these errors "The Job Failed Due to  MAX-Time at ODS Activation Step" and          "Max-time Failure" How to resolve this failure?

  • How can I get the product key of my HP 250

    Hi, I contacted Microsoft concerning the Product key of my hp 250 G1 for activation. I have been trying to activate it since last year but I could not. Microsoft told me it Is a volume licensing key and it only showed last 5 digits of the keys. If I

  • Cannnot Print PDF documents

    Since upgrading to Mac O SX Lion 10.7.2, I can no longer print a PDF documents (not from an e-mail attachment or from a file folder).  I get the spinning beachball and must force quit preview (not responding).  I have uninstalled and reinstalled my p

  • Townsend Cafe Tutorial - in CS3? Where?

    I have Fireworks 8 running at home and have used the fine tutorial of the "Townsend Cafe" to practice setting up site graphics; I wanted to use this with some students, but the school lab has CS3 (soon to be CS4). I see the Townsed Cafe files there,