Change Sale order range number

Hi,
I have implemented the number range selection in user exit MV45AFZZ for sale order. Is there any BADI available which provide the same capability as MV45AFZZ ??
Regards,
Kit

The Process order number range is maintained in tcode : CO82.
Typically you change number range for various reasons like
1. External number range required
2. New order type created & new number range required for Rework orders
3. Tracking certain special orders with different no range for differenciation & easy visibilty
4. Specail no range reqd due to limitation of External System that is interfaced with SAP
5. Different no range required for collective orders, MTO, M to stock orders etc...
These are some of the reasons I can recollect from my experience.
This you may take as the PROS.
As far as CONS :
1. Good communication with user group needed before number range change
2. As with any configuration change, Regression testing needed by users/ business groups before configs move to Production
this is my 2 cents...
hope this helps. More questions? please come back
thanks,
Ram

Similar Messages

Change process order range number

I was requested to change the current process order range number.
Could you give some information about this?
Pros/Cons?
Thanks,
Gerardo

The Process order number range is maintained in tcode : CO82.
Typically you change number range for various reasons like
1. External number range required
2. New order type created & new number range required for Rework orders
3. Tracking certain special orders with different no range for differenciation & easy visibilty
4. Specail no range reqd due to limitation of External System that is interfaced with SAP
5. Different no range required for collective orders, MTO, M to stock orders etc...
These are some of the reasons I can recollect from my experience.
This you may take as the PROS.
As far as CONS :
1. Good communication with user group needed before number range change
2. As with any configuration change, Regression testing needed by users/ business groups before configs move to Production
this is my 2 cents...
hope this helps. More questions? please come back
thanks,
Ram

How to change pricing Conditions in Sales order in change sales order bapi

Hi Experts,
How to change pricing Conditions in Sales order in change sales order bapi.
I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
Thanks in Advance .
NLN

HI NLN
I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
Import Paramters:
 SALESDOCUMENT - Sales Document Number
 ORDER_HEADER_INX - UPDATEFLAG as 'U'.
 LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
Tables:
 CONDITIONS_IN - ITM_NUMBER,
 COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is '01'
 COND_TYPE,
 COND_VALUE,
 CURRENCY.
 CONDITIONS_INX - ITM_NUMBER,
 COND_COUNT,
 COND_TYPE,
 UPDATEFLAG as 'U',
 CURRENCY.
 Hope i have clarified your query.
Kind Regards
Eswar

Getting error in while changing sales order which is created using BAPI

Hi All,
   I have created the sales order using BAPI ( BAPI_SALESORDER_CREATEFROMDAT1 ) and i am successfully creating sales order using this BAPI. But while i want to change sales order iam changing Shipping Conditions in Header Data of sales order .its giving an error .can any know any thing about this.
Error mesage :    No status object is available for SDI 300082407/10    (Order Number/Item Number)
In Header i am passing these values ...
     wa_order_header_in-doc_type = vbak-auart.
    wa_order_header_in-sales_org = vbak-vkorg.
    wa_order_header_in-distr_chan = vbak-vtweg.
    wa_order_header_in-division = vbak-spart.
Do i required to pass the below values ? in Header structure ( BAPISDHEAD1 ).
REFOBJECTTYPE
REFOBJECTKEY
REFDOCTYPE
Regards,
Sudhakar Reddy A

rectified

Error received while changing sales order.

Hi All,
while changing sales order we have received error message "An internal program error has occured.See note 44283".
So could you plesae explain me what needs to be done.
Thanks in advance.

To avoid to store inconsistent data in the future, activate the following method of the BADI                           BADI_SD_SALES:
> 1 - Transaction SE18
> 2 - Definition name: BADI_SD_SALES Menu: Implementation -> Overview double-click on implementation: IM_CORE_CHECK
> 3 - Now you will get an overview on the methods and you see also that the implementation IM_CORE_CHECK is inactive
> 4 - Press the change button and activate
This check works in the following way:
> 1 - if the number of items is less than 10 and there is an inconsistency the system will not store the data and an A-message will occur.
> 2 - If the number of items is greater than 10 and less than 50 and there is an inconsistency the data will be stored and an I-message will occur.
> 3 - if the number of items is greater than 50 there is no check because performance.
Edited by: Gerard Magorrian on Aug 6, 2010 4:01 PM

Problem in updating Billing plan while changing Sales order

Hi All,
 I am using the BAPI 'BAPI_SALESORDER_CHANGE' to change a Prepaid Sale order.After calling this BAPI ,I am calling the function module 'BILLING_SCHEDULE_SAVE' to update the Billing plan of the changed Sale order(Billing plan dates for Billing type ZF1 are changed).
 The updated date values are getting reflected in the screen when I view through the transaction VA02 and the values are also updated in FPLT table but the values are not getting reflected in the table VKDFS.
 Since the values are not getting reflectedin the table VKDFS the billing date is not correct while we view in the transaction VF04.
 Please provide your valuable suggestions for updating the Billing date in VKDFS table.
 Thanks in advance for your help.
Thanks and regards,
Siva

Hi,
I had the same problem. Here is an example code to resolve it:
REPORT ytestfg.
DATA: i_bsid LIKE bsid OCCURS 0,
 i_bsid2 LIKE bsid OCCURS 0.
TABLES: bsid.
DATA: doc LIKE vbak-vbeln,
 pos(6) TYPE n.
DATA e_fpla LIKE fpla.
DATA e_fplt LIKE fpltvb OCCURS 0 .
DATA: zfpla LIKE fplavb OCCURS 0,
zfplt LIKE fpltvb OCCURS 0.
DATA zfplt2 LIKE fpltvb OCCURS 0 WITH HEADER LINE.
doc = 'G03060619'.
pos = '000010'.
CALL FUNCTION 'SD_SALES_DOCUMENT_READ'
EXPORTING
 document_number = doc.
CALL FUNCTION 'SD_SALES_BILLINGPLAN_READ'
EXPORTING
 i_vbeln = doc
 i_posnr = pos
IMPORTING
 e_fpla = e_fpla
TABLES
 e_fplt = e_fplt
EXCEPTIONS
 no_billingplan_allowed = 1
 no_billingplan_found = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Read the billing plan
CALL FUNCTION 'BILLING_SCHEDULE_READ'
EXPORTING
 fplnr = e_fpla-fplnr
I_VFKDAT =
I_BFKDAT =
TABLES
 zfpla = zfpla
 zfplt = zfplt
Upddate the ZFPLT2 table with the new values
MOVE zfplt[] TO zfplt2[].
READ TABLE zfplt2 INDEX 1.
zfplt2-afdat = '20080927'.
Very important to set field updkz = 'U' ***
zfplt2-updkz = 'U'. "--> UPDATE!!
MODIFY zfplt2 INDEX 1.
CALL FUNCTION 'BILLING_SCHEDULE_SAVE'
TABLES
 fpla_new = zfpla
 fpla_old = zfpla
 fplt_new = zfplt2 " --> NEW
 fplt_old = zfplt.
CALL FUNCTION 'SD_SALES_DOCUMENT_SAVE'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Regards,
Edited by: PHO_BA on Mar 9, 2009 5:28 PM

End User Transaction for Mass Change Sales Orders

Hello,
Transaction MASS can be used to change sales orders using object type BUS2032, however, end users are not allowed access to MASS.
In most other cases, the object types can be accessed by individual transactions, for example, MEMASSPO for BUS2012 and XD99 for KNA1.
But I cannot seem to find a similar transaction for object type BUS2032, does anyone know whether one exists or how to create such a shortcut.
Thanks,
Jake.

Hi
See SAP Note 483303 - BUS2032: Only sales orders of category VBAK-VBTYP = 'C'
Regards
Eduardo

No Sales Order Item number in PCA document on Delivery

Hi,
We have an issue as below:
Sales Order (Not a CO object)>Delivery is done> We cannot see Sales Order item number in the PCA document whereas it appears in Accounting Document.
After Billing, a CO-PA document also generated.
Thanks to provide any information on this.
Umapathi G

Hi,
For billing documents, the information from the respective sales order and from the sales order item in the line item table GLPCA is only in the fields AUBEL and AUPOS.
You post a goods issue for delivery. If you post the goods issue for a sales order stock, the information of the sales order is updated in the profit center document (field GLPCA-KDAUF). If the goods issue is posted from the make-to-stock inventory, then the sales order information is not updated.
regards
Waman

Changing Sales Order PARTNER from 'MASS' transaction

Hi,
I have a requirement to change partner details (e.g. SHIP TO party from SH1 to SH2) for sales order. I need to use tcode 'MASS' (Mass maintainance) for BUS2032. But it does not have the option to change partner details.
Can anybody let me any approach to achieve this. If we can do it through a config or may be creating a custom business object etc...
I could found out the thread below talking about the same issue, but there is no solution to that. I want to build the solution around SAP standard and not interested for BDC/LSMW/CATT etc.
Mass changes Sales order partners
Thanks,
Madhu
Edited by: Madhu K on Nov 1, 2011 11:58 PM

Alan
I am ok to create a custom tcode for MASS. Do I need to copy the BUS2032 or the whole TCODE?
My major concern is, how to get the VBPA structure to the selection screen so that it ll show me the I/P fields to enter Old Ship to and New ship to..
Can You please give me some idea on this.
Thanks
Madhu

New sales order and Change sales order in item level or delete at item leve

I got one requirement. Daily i have to display one report on new sales orders created on that day and any sales order item is modified or any item is deleted or any item is added.
                  How to get the sales order numbers and position numbers which will follow above creteria. I found one function module but it is not giving position numbers and new sales order details.
         Is there any BAPI for this requirement.

I am using "CHANGEDOCUMENT_READ" function module to get the new sales orders created and changed sales order items on a particular time. This function module is getting data from CDHDR and CDPOS tables. But only change sales orders is coming. New sales orders which is created on that time is not getting.
          One of my friend is telling like we have to activate one change pointer to retrive new sales orders also. Which is like there will be one check box.
Is any body having idea on this. Please reply me on briefly with the code to retrive new sales orders and changed sales orders

BAPI / FM to change Sales order item data

Hi,
I need a BAPI or FM to update the following fields of VBAP (Sales Document Item Data)
KZWI2 - Subtotal 2 from pricing procedure for condition
KZWI3 - Subtotal 3 from pricing procedure for condition
KZWI4 - Subtotal 4 from pricing procedure for condition
KZWI5 - Subtotal 5 from pricing procedure for condition
I found FM: ISM_SALES_ITEM_CHANGE for this, but when I use it, it gives me dump for some data object 'XJKNBK'.
Does any one have idea on how to use this FM or if any other FM is there please let me know?
Thanks & Regards,
Sunanda.

hi Sunanda..
I think you can try the Bapi 'BAPI_SALESORDER_CHANGE'. You can make use of its Tables Parameter CONDITIONS_IN and CONDITIONS_INX.
example:
How to change pricing Conditions in Sales order in change sales order bapi
thanks,
Padma

Change Sales Order, Delivery, Billings Reports

Hi Gurus,
Can any body please tell me is there any Report for change logs of Change Sales Order, Delivery,
Billings & Change report of Customer & Material,
Regards,
Sai

Hi,
There are no standard reports to display the changes made in the Sales orders and the details you had asked.
But for the latest changes you can check in the Table :Header details for change CDHDR and for Item details CDPOS
Or Based on your requirement you can go for a Customized Report
rgds
psk

Arbitrary Number Generated before Sales Order Document number is Generated

I want to know which is the arbitrary number generated before the sales Order Document number is created. In which table the arbitrary number is stored?
The Exit which triggers the arbitrary number in the transaction VA01?

Hi
You get the Arbitrary number throug the FM NUMBER_GET_NEXT.
interne Nummernvergabe
        data: da_rc like inri-returncode.
        call function 'NUMBER_GET_NEXT'
          exporting
            nr_range_nr = da_numki
            object      = 'RV_BELEG'
          importing
            returncode = da_rc
            number      = vbak-vbeln.
And regarding userexit, there is
perform userexit_number_range using da_numki statement in include MV45AF0B_BELEG_SICHERN.
Regards
Raj

Error in change sales order.

Hi ,
my process is : First create SO than Billing than Delivery. i need to change the sales order Batch when
delivery saved.
When i change Sales order Batch withouting creating billing it is changing Fine through BAPI FM .
But when i create So --Billing --- delivery than in this case Sales order batch not changing.
it is giving error like below.
Field CHARGE Can not be changed VBAPKOM 000010 is ready for input'
Message is comming from message class V1 and Message no 739.
PLease Reply .
If any clue Have.
Thanks.

Hi,
When you create a Billing Document for the Sales Order it is no longer possible to change a lot of fields (as these fields have been copied to the Billing Document). Field Batch is one of those fields.
So if you have to include the batch in the Sales order you must update this field prior to creating the Billing Document.
Regards,
John.

Change Sales Order material characteristics

Dear Pals,
I have a question for changing Sales Order material characteristics by item.
If i want to change the sales order's item conditions, I can modify the internal table "XKOMV" in user exit "USEREXIT_SAVE_DOCUMENT_PREPARE"
Is there any internal table for Sales Order's characteristics can i use   in user exit "USEREXIT_SAVE_DOCUMENT_PREPARE" ?
Or any FM or BAPIs can get the internal table for characteristics and characteristics value for Sales Order item?
Thank you!

You can use BAPI_SALESORDER_CHANGE.
1. Get the SO detail using BAPISDORDER_GETDETAILEDLIST.
2. MODIFY the ORDER_CFGS_* internal tables and update.
        CALL FUNCTION 'BAPISDORDER_GETDETAILEDLIST'
          TABLES
            order_cfgs_value   = gt_char
            order_cfgs_ref       = gt_char_ref
            order_cfgs_inst      = gt_char_ins.
        MODIFY gt_cfgs_*.
        CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
         TABLES
            order_cfgs_value   = gt_char
            order_cfgs_ref       = gt_char_ref
            order_cfgs_inst      = gt_char_ins.
Refer SAP note 549563.

Change Sale order range number

Similar Messages

Maybe you are looking for