Change SAP MC default port

Can anyone tell me how to change the default port (5xx13) for SAP MC? That port is already in use on our system and so the SAP MC java applet cannot connect.
Thanks!
Kirsten

Hi Kirsten,
As far as I know, the SAP MC uses the same port as the sapstartsrv service port.
By default the service uses ports:
      5$(SAPSYSTEM)13 for http
      5$(SAPSYSTEM)14 for https (if SSL is configured for the instance),
And this might be overwriten in etc/service file by specifying:
      sapctrl$(SAPSYSTEM)
      sapctrls$(SAPSYSTEM)
Check SAP note 936273.
Regards,
Désiré

Similar Messages

How to change sybase sql default port

Hi Experts,
Is there any option to change the sybase sql default port ? Here i want to change the port number because we can't start two SAP instances at the same time on the same server?
Kindly advice
Regards
Praveen

Hi,
You can try to start a new port and shutdown the old one.
Once you've done that you can change your interfaces file to the new port.
Check what ports are open:
sp_listener 'status'
go
Start a new port
sp_listener 'start', 'tcp:host:port", "remaining"
go
Stop old port:
sp_listener 'stop', 'tcp:host:port', "remaining"
go
Change interfaces file to point to the new port.
Regards,
Ryan

Changing Oracle Lisetener default port

Dear All
Please advice steps for changing default Oracle LISETENER from 1521 to another port.
Thank you

mtawfik wrote:
Dear All
We don't use client/server model, we are using Bea weblogic as application server... application users connected through Bea Weblogic and DBAs can can change the port in tnsnames.ora whenever security guys will change defult database listening port to a new port from firewall because the database server is located behind firewall.Even in a 3-tier model, you have a 'client' - the client is the app server. It is still necessary to change the client's (app server) information. At the very least you need to update ALL the appropriate hard coded JDBC references (if any), JDBC data sources, and potentially JNDI references.
My Question is: how is dynamic service registration control communication between listener and PMON?PMON reads the database's 'local_listener' parameter to determine which port and hostname (especially on multi-homed machines) on which the listener is listening. That parameter is described in the Reference Manual in the docs at http://tahiti.oracle.com

DISPATCHER : avoid change of a default PORT 1521

I have configured DB 10.1.0.3 with SHARED SERVER .
If I connnected to the database (SERVER=SHARED), dispatcher would use
non-default PORT as
"D001" established:5 refused:0 current:4 max:972 state:ready
DISPATCHER <machine: ............., pid: 19839>
(ADDRESS=(PROTOCOL=tcp)(HOST=..............)(PORT=35972))
I use my database behind the firewall in DMZ , so I want to use a default PORT 1521 with my dispatcher D0001.
There was an option "PORT" in a initialization parameter DISPATCHERS in previous DB versions. I cannot use this option in the database release 10.1.0.3.
Help me?

I'm afraid you can't do that, at least with that version.
See http://download-uk.oracle.com/docs/cd/A97329_03/core.902/a92171/concepts.htm#1016370
Here an extract :
The metadata repository is always configured to use port 1521 and has a service name of the form iasdb.host.domain (for the first infrastructure on a host) and iasdbx.host.domain for any subsequent infrastructures on that host). You should never change these values.

Oracle change default port

Hi,
I need change the oracle default port from 1521 to 1523
I changed in listener.ora and in tnsnames.ora but I have any problem to connect with 1523
Which step I have to perform to change default port?

Raf Royal wrote:
Hi,
I need change the oracle default port from 1521 to 1523
I changed in listener.ora and in tnsnames.ora but I have any problem to connect with 1523
Which step I have to perform to change default port?Besides the utter futility of gaining anything through such a change, "I have any problem to connect with 1523" is not an actionable error message.
I have a problem starting my car. Which step I have to perform to start my car?

How can we change the default port 50000 of SAP WAS?

Hi,
1. How can we change the default port 50000 of SAP WAS?. Can we assign 8080?
2. Can we assign default context ("/") for the application we have developed?
Regards,
Sudheesh

Hi Sudheesh,
just refer this help..
http://help.sap.com/saphelp_nw04/helpdata/en/5b/82d3c3ee9691418e6b0281f933a37d/frameset.htm
U have to restart the sever after changing the port.
One more main thing here , no other services must not be using the port.
It will cause port binding exception.
Regards
Kishor Gopinathan

How to change the default port of webdispatcher

Hello Everyone,
We wish to know to how to change the default port of SAP webpatcher port from 81$$ to 80.
Appreciate your response.
Thanks,
Vadi

Hello Vadi
you have to change the PORT value in your profile parameter from 81$$ to 80
icm/server_port_0 = PROT=HTTP,PORT=81$$ to
icm/server_port_0 = PROT=HTTP,PORT=80
Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
$$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
thanks
Bhudev

Changing the default port 1433 in SQL 2005 on an ECC 6.0 system

Hello everybody,
There is a requirement to change the default port of MS SQL 2005 from 1433 to a different port.
I am using SAP ECC 6.0 running on an ABAP stack. I would like to know what changes need to be done from the SAP end to achieve it. Any pointers in this regard would be helpful.
Regards
Dinesh K

Sizing
Hardware sizing should be completed by your SAP partner. Its based on many things. Users, modules, storage volumes, peek, BP, workloads etc etc.
You can do the 'noddy' version with the sapsize on OSS. The output from this is in 'SAPs' you could look up std systems bench marks and get something 'like' it. Else submit the results to the hardware vendor of your choice and they will do it for you.
System Redundancy
Depends what you are trying to do.
MSCS is a fail over HARDWARE only solution. ie if you want to patch or take a node out of service you can by 'failing over' the services on it to the other node. If you get a DB problem MSCS can not help you at all.
Log shipping gives you 'rapid' recovery options for SQL(and there in SAP). The way this normally works is via either manual or automatic log-shipping to a 'standby' system with SQL/SAP loaded on it that can be brought online if you get a problem with the main system.
A well planned system will have fail-over and recovery capabilities, ie it will use BOTH.

How to change default port in iws 4.1 installed in Solaris 5.9

Hi All,
I had installed iws 4.1 in solaris 5.9
Now , I want to change my default https port from 443 to 445 .
Can anybody , Please let me know the proceudre how to do it ?
Thanks for help in advance.
Regards
James

Ya , Manish you are right IWS 4.1 is really old.
But My application has been developed in past that is using IWS4.1 .
Right now , we are not having budget to migrate it from IWS4.1 to IWS6.1.
And the pointer for changing the port from magnus.conf is also correct but
I need to make it default port.
That means If would not specify any port number out of two port request goes to default one.
Right now default port is 443
But I want it to be 445
Thanks
James
Message was edited by:
write2jamesbond

How to change default port in 9.2?

Hi,
In 8.1, when I run config wizard, I may assign listening port. But I could not do so in 9.2. I tried to modify startscript.xml and tokenValue.properties under base_domain\init-info\, it did not work. Does anyone know how to change the default port 7001 to other port?
Thanks

Login via the console, select environment, servers. Select your server, you should see the greyed out Listen Port attribute (you should be in the general tab). Click lock and edit on the top left hand corner of the console and edit your listen port.
The config.xml does not explicitly define stanzas for some default values (Same as earlier releases), I personally don'tlike this. If you change the default value it should reappear in it.

Hussein Badakhchani

Change XML DB default HTTP port number from 8080 to ... ?

Hi !
I need to change the default port number of XML DB from port 8080 to something else, because the development server also hosts a web service, which is configured to listen on port 8080 for debugging reasons. This WS is provided by our partner and we have no control over the ports it uses.
I'm not a network prof. so I'd like to ask what other port number would make sense for XML DB instead of 8080. Can I choose any port number I like, e.g. 8088?
Besides using DBCA is there any other place I need to configure this new port number?
TIA,
Stefan

I've done this on occasion using the OEM attach to the database and click XML Database then configuration, you will see it on the right window pane.

Changing SSH default port from 22 to 8080

Hi all,
I have deployed SSH on my home solaris 10 x86 machine and it was working fine through the default port 23.
But the problem is that i can't connect to it from work as the firewall blocks outgoing SSH traffic. So i want to change the default port from 23 to 8080.
i changed the value of Port in /etc/ssh/sshd_config.
Then i ran the command
/usr/lib/ssh/sshd -f /etc/ssh/sshd_config
because as far as i know from the man pages it will cause the daemon to reread the configuration file thus the new value for port but still it didnt' work.
Also i tried the command
/usr/lib/ssh/sshd -p 8080
but didn't work also
I tried to restart the ssh daemon after both commands but still the same result.
Would anyone please help me with this issue as i still don't have much experience in solaris.
Thanks in advance.

Ok, So i installed lsof, but
When i ran that command i got this output
bash-3.00# lsof -M | grep 8080
sshd 1085 root 3u IPv6 0xd43e21c0 0t0 TCP *:8080 (LISTEN)
it seems that sshd is occupying port 8080 but still ican't login from a remote machine.
When i try it asks me to enter the username and then displays a messaing "Using keyboard-interactive authentication" then asks for password, When i enter the password it gives me "Access denied" although iam sure this is the right password.
When i try to connect to port 22 things go fine and i can login with the same user "root" with no problems (i know accessing remotely using root is not secure but that is not the problem for the moment)
So i did that
ps -ef | grep ssh
root 1085 1 0 19:05:07 ? 0:00 /usr/lib/ssh/sshd
root 1093 1 1 19:05:51 ? 0:00 /usr/local/sbin/sshd
Note that the PID for the process grabbing the port is the same for /usr/lib/ssh/sshd
so is that the ssh daemon or is it /usr/local/sbin/sshd ????
Please advise. Note that iam not experienced in solaris so please take it easy with me.
Thanks

Change default port to 80

Hi everyone,
I am trying to change the default port of APEX to port 80. I performed all the steps described in the documentation or in this thread HTMLDB Port Number but I am getting the following error when trying to start the HTTP Server from oracle user : apachectl is not owned by this user.
Do you have any idea why I am getting this error, or someone experienced the same issue ?
Best regards,
Othman

cd to $OHS_HOME/Apache/Apache/bin and then
chown root apachectl

ECC6 integrated ITS default port 8000 changed to http port 80

We want the ECC6 integrated ITS default port 8000 changed to http port 80. The integrated ITS Cat2 transaction is currently working on http port 8000. I changed the icm/server_port_0(Instance Profile) and the ICM Monitor Active Services(smicm services) to use port 80. Cat2 transaction fails http fails after system restart. I have reverted back to 8000 and all is now working again. Is there more work that needs to be carried out or is port 80 is supported?

is your application server in domain?
if its in domain and when used sapides.<xxxx>.com if you get DNS not found, may be browser is looking up internet, put your domain in the exception in tools->internet options->connection->lan settings->proxy->advanced
"This server does not support HTTPS! It is therefore potentially unsafe to send your password" i just a warning message and you should still be able to log on.
(if you want to hide this info let me know)
and i never could logon into R/3 !!
do you also see a message that SSO2 is not configured? if yes follow the steps explained in OSS note no.517860
when you say never could logon what happens,
a) the field for user id pwd disabled? - click on the basic authentication button to get the log on pop up
b) error messages?
Regards
Raja

Changing Tomcat Default Port.

Hi.... All
How can i change the default Port (8080) in Tomcat.
In Which file do i need to change this manually.
thanx

change this on the server.xml,
the connector part.
<Connector port="8080" maxHttpHeaderSize="8192"
the port attribute here

Change SAP MC default port

Similar Messages

Maybe you are looking for