Changing Tomcat Default Port.

Hi.... All
How can i change the default Port (8080) in Tomcat.
In Which file do i need to change this manually.
thanx

change this on the server.xml,
the connector part.
<Connector port="8080" maxHttpHeaderSize="8192"
the port attribute here

Similar Messages

  • Change tomcat default port with JBoss

    Hello,
    I was looking for the server.xml file for tomcat that's deployed with jboss to change its port but I cannot seem to find that file. Question: how to change the port setting for tomcat that's shipped with jboss 3.2.3?
    Thanks in advance!
    Alan
    09:00:45,554 INFO [SARDeployer] nested deployment: file:/C:/user/product/JBoss/jboss-3.2.
    3-src/build/output/jboss-3.2.3/server/default/deploy/jbossweb-tomcat41.sar/tomcat41-servic
    e.jar
    09:00:46,676 INFO [STDOUT] Apache Tomcat/4.1.29
    09:00:46,796 ERROR [Http11Protocol] Error initializing endpoint
    java.net.BindException: Address already in use: JVM_Bind:8080
    at org.apache.tomcat.util.net.PoolTcpEndpoint.initEndpoint(PoolTcpEndpoint.java:30
    2)
    at org.apache.coyote.http11.Http11Protocol.init(Http11Protocol.java:184)

    sorry, it is in the jboss-service.xml file and here is my modification (8080 to 8088)
    <!-- A HTTP/1.1 Connector on port 8088 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    address="${jboss.bind.address}" port="8088" minProcessors="2" maxProcessors="100"
    enableLookups="true" acceptCount="10" debug="0"
    connectionTimeout="20000" useURIValidationHack="false"/>
    JMi

  • How to change the default port of webdispatcher

    Hello Everyone,
    We wish to  know to how to change the default port of SAP webpatcher port from 81$$ to 80.
    Appreciate your response.
    Thanks,
    Vadi

    Hello Vadi
    you have to change the PORT value in your profile parameter from 81$$ to 80
    icm/server_port_0 = PROT=HTTP,PORT=81$$ to
    icm/server_port_0 = PROT=HTTP,PORT=80
    Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
    $$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
    thanks
    Bhudev

  • Changing SSH default port from 22 to 8080

    Hi all,
    I have deployed SSH on my home solaris 10 x86 machine and it was working fine through the default port 23.
    But the problem is that i can't connect to it from work as the firewall blocks outgoing SSH traffic. So i want to change the default port from 23 to 8080.
    i changed the value of Port in /etc/ssh/sshd_config.
    Then i ran the command
    /usr/lib/ssh/sshd -f /etc/ssh/sshd_config
    because as far as i know from the man pages it will cause the daemon to reread the configuration file thus the new value for port but still it didnt' work.
    Also i tried the command
    /usr/lib/ssh/sshd -p 8080
    but didn't work also
    I tried to restart the ssh daemon after both commands but still the same result.
    Would anyone please help me with this issue as i still don't have much experience in solaris.
    Thanks in advance.

    Ok, So i installed lsof, but
    When i ran that command i got this output
    bash-3.00# lsof -M | grep 8080
    sshd 1085 root 3u IPv6 0xd43e21c0 0t0 TCP *:8080 (LISTEN)
    it seems that sshd is occupying port 8080 but still ican't login from a remote machine.
    When i try it asks me to enter the username and then displays a messaing "Using keyboard-interactive authentication" then asks for password, When i enter the password it gives me "Access denied" although iam sure this is the right password.
    When i try to connect to port 22 things go fine and i can login with the same user "root" with no problems (i know accessing remotely using root is not secure but that is not the problem for the moment)
    So i did that
    ps -ef | grep ssh
    root 1085 1 0 19:05:07 ? 0:00 /usr/lib/ssh/sshd
    root 1093 1 1 19:05:51 ? 0:00 /usr/local/sbin/sshd
    Note that the PID for the process grabbing the port is the same for /usr/lib/ssh/sshd
    so is that the ssh daemon or is it /usr/local/sbin/sshd ????
    Please advise. Note that iam not experienced in solaris so please take it easy with me.
    Thanks

  • Changing the default port 1433 in SQL 2005 on an ECC 6.0 system

    Hello everybody,
    There is a requirement to change the default port of MS SQL 2005 from 1433 to a different port.
    I am using SAP ECC 6.0 running on an ABAP stack. I would like to know what changes need to be done from the SAP end to achieve it.  Any pointers in this regard would be helpful.
    Regards
    Dinesh K

    <b>Sizing</b>
    Hardware sizing should be completed by your SAP partner. Its based on many things. Users, modules, storage volumes, peek, BP, workloads etc etc.
    You can do the 'noddy' version with the sapsize on OSS. The output from this is in 'SAPs' you could look up std systems bench marks and get something 'like' it. Else submit the results to the hardware vendor of your choice and they will do it for you.
    <b>System Redundancy</b>
    Depends what you are trying to do.
    MSCS is a fail over HARDWARE only solution. ie if you want to patch or take a node out of service you can by 'failing over' the services on it to the other node. If you get a DB problem MSCS can not help you at all.
    Log shipping gives you 'rapid' recovery options for SQL(and there in SAP). The way this normally works is via either manual or automatic log-shipping to a 'standby' system with SQL/SAP loaded on it that can be brought online if you get a problem with the main system.
    A well planned system will have fail-over and recovery capabilities, ie it will use BOTH.

  • How can we change the default port 50000 of SAP WAS?

    Hi,
    1. How can we change the default port 50000 of SAP WAS?. Can we assign 8080?
    2. Can we assign default context ("/") for the application we have developed?
    Regards,
    Sudheesh

    Hi Sudheesh,
    just refer this help..
    http://help.sap.com/saphelp_nw04/helpdata/en/5b/82d3c3ee9691418e6b0281f933a37d/frameset.htm
    U have to restart the sever after changing the port.
    One more main thing here , no other services must not be using the port.
    It will cause port binding exception.
                  Regards
                  Kishor Gopinathan

  • Changing the default port while executing the query

    Hi gurus,
      Please help me with this problem. When I open a query in BEx Analyzer 3.x, I get this option to launch the query in web browser, now, when I click on this option, there is a new IE explorer that opens up and the address bar shows up the following address.
    http://<My Host name>:8100/sap/bw/bex?<The query>
    Now, I want to change this port to 8000 by default, what are the settings that I have to change. I tried searching it everywhere, but to no avail,  Any help would greatly be appreciated.
    Regards,
    Sree.

    I got the answer on my own for this quetion guys,
    The function module RSBB_URL_PREFIX_GET is used to generate the URL in BW. That is, when you click "Launch in Web Browser" in the BEx Anaylzer, "Display Query on the Web" in the BEx Query Designer or "Execute in the browser" in the Web Application Designer, the function module is called and this returns the protocol, host, domain, port and service.
    The function module essentially runs through three steps:
    Determine the settings on the application server and generate the URL for the application server.
    Determine the settings relating to the message server, provided that it is used, and replace the host and port of the application server URL with the values for the message server.
    Check whether an exception is defined for the URL generated in the previous two steps, and, if required, replace the host and port with the values from the exception.
    First, the application server settings are created. If a message server is used, the settings relating to host and port are replaced with the message server settings. If an exception is maintained, the host and port are replaced in turn by the exception.
    Hence a simple conclusion to this problem is that you need to maintain an exception or an entry in the table HTTPURLLOC, this can be done via SE11. the following fields appear and use the entry as shown below...
    Client    <default client>
    Sort/Search/Match Sequence (First Match Wins)   <Can be Numerical numbers 1 2 3 etc, depending on the priority>
    Protocol for URL (TRANSLATE TO UPPER CASE)   <http, https etc  (Whatever you want to be used in the url)>
    Application Key (BSP=/BSP/Namespace/Name) (*=wildcard&UPPER)   <I don't know what does this mean and so used *>
    Target Domain, (* = Wildcard & UPPER CASE)    <Used * here again.>
    Host Name with Domain   <The hostname u want to appear in the address field>
    Port Number    <The port number>

  • Change Tomcat 8080 port to 80

    Hello!
    I installed BO XIR2.
    Tomcat was configured on 8080 port, but now i have to change it on 80.
    What i have to do?
    Do i have to change it in tomcat server.xml config file or may be via special application?
    Thank for advise!

    Just one addition to Brian's reply.
    As Thomas' pointed out, it is imperative that IIS also not be using port 80. If IIS is running, all applications on Tomcat will ask for logon credentials.
    You can check if IIS is running using:
    telnet localhost 80
    from the server.

  • Can we change the default port http server??

    Hello,
    While i'm installing the Oracle9iAS, the port for http server is given as 7777. If i want to change that port to 80, how can change that??? or anyway to hide and show the main page as http://oracle9i.jade.com
    Thanks
    Regards,
    Ming Jade

    Ming Jade,
    Yes...you can change it in
    <Oracle9iASHome>/Apache/Apache/conf/httpd.conf
    Change the value of Port from 7777 to 80 and the restart your application server...
    Cheers
    --Venky
    Resources :
    For information on configuring J2EE1.3 applications
    in Oracle9iAS, please have a look at the following tutorials:
    http://otn.oracle.com/sample_code/tech/java/j2ee/jintdemo/content.html
    http://otn.oracle.com/sample_code/tech/java/j2ee/jintdemo/tutorials/HiAvTutorial.html
    http://otn.oracle.com/sample_code/tech/java/j2ee/jintdemo/tutorials/webcache.html

  • How to change default port in 9.2?

    Hi,
    In 8.1, when I run config wizard, I may assign listening port. But I could not do so in 9.2. I tried to modify startscript.xml and tokenValue.properties under base_domain\init-info\, it did not work. Does anyone know how to change the default port 7001 to other port?
    Thanks

    <p>Login via the console, select environment, servers. Select your server, you should see the greyed out Listen Port attribute (you should be in the general tab). Click lock and edit on the top left hand corner of the console and edit your listen port.</p>
    <p>The config.xml does not explicitly define stanzas for some default values (Same as earlier releases), I personally don'tlike this. If you change the default value it should reappear in it.</p>
    <p>
    Hussein Badakhchani</br>
    </p>

  • Change default port to 80

    Hi everyone,
    I am trying to change the default port of APEX to port 80. I performed all the steps described in the documentation or in this thread HTMLDB Port Number but I am getting the following error when trying to start the HTTP Server from oracle user : apachectl is not owned by this user.
    Do you have any idea why I am getting this error, or someone experienced the same issue ?
    Best regards,
    Othman

    cd to $OHS_HOME/Apache/Apache/bin and then
    chown root apachectl

  • Change default port used for FlexUnit reports

    Good day,
    I have recently set up a CruiseControl server that runs two concurrent builds. Most of these builds contain FlexUnit tests. I am well aware that the default port for FlexUnit task is 1024 and I know that only one listener can access the port at one time. I tried passing a different port number but the flexunit task hangs. So, I was wondering if anyone has tried changing the default port to something other than 1024.

    Hi Michael,
    I created a bug for tracking, as you requested (https://bugs.adobe.com/jira/browse/FXU-153).

  • SSH change default port via ssh.plist

    I have to change SSH default port on Snow Leopard server. There's a hint that works with my home snow leopard but don't work on server why?
    This method edit ssh.plist
    <key>Sockets</key>
    <dict>
            <key>Listeners</key>
            <dict>
                    <key>SockServiceName</key>
                    <string>ssh</string>
                    <key>Bonjour</key>
                    <array>
                            <string>ssh</string>
                            <string>sftp-ssh</string>
                    </array>
            </dict>
            <key>Listeners2</key>
            <dict>
                    <key>SockServiceName</key>
                    <string>22022</string>
            </dict>
    </dict>

    Right after the IP Address, I enter a colon followed by the port to which I'm connecting. This works great. I also downloaded an application called CoRD which works really well.
    As an aside I have to say that I'm disappointed at the Apple community for not responding to this post. I'm a long time Windows user (since there was a Windows) and I've always had posts in the Windows Forums answered within 24 hours. I've had questions in the past on other Apple related issues which also have gone un-answered. If this is the de-facto standard .. I'm beginning to get nervous.
    --- Val

  • Profile Manager: Change default ports (80/443)?

    I was never able to figure out how to do this with Mountain Lion Server (thus we were never able to utilize Profile Manager), but I'm hoping this may now be possible with Mavericks Server. Is it possible to change the default ports the Profile Manager web admin uses (80/443)? I already have another server running HTTP/HTTPS services on those ports, thus this would be a conflict.
    The only other option would be purchasing a second static WAN IP, but would rather not have to do that.
    Thanks,
    Kristin.

    Realistically you are not going to be able to change the ports used by the built-in Apple websites. Even if you managed to (briefly) do it, it is almost certain that your settings would get over-written by Apple later.
    What you can do is change the port FileMaker uses. I would also say there is no benefit to running FileMaker Server on the same computer as Server.app and in fact as you have seen a potential disadvantage. Therefore using a separate Mac mini without the Server.app installed is another option.
    See http://help.filemaker.com/app/answers/detail/a_id/215/~/specifying-a-port-number -for-instant-web-publishing
    For what it's worth RoundCube is nothing to do with FileMaker either. If you have not already seen it you can get an easy to use installer for RoundCube here http://topicdesk.com/downloads/roundcube and it will work on the same Mac as Server.app and is compatible with the latest versions.

  • Change SAP MC default port

    Can anyone tell me how to change the default port (5xx13) for SAP MC?    That port is already in use on our system and so the SAP MC java applet cannot connect. 
    Thanks!
    Kirsten

    Hi Kirsten,
    As far as I know, the SAP MC uses the same port as the sapstartsrv service port.
    By default the service uses ports:
          5$(SAPSYSTEM)13 for http
          5$(SAPSYSTEM)14 for https (if SSL is configured for the instance),
    And this might be overwriten in etc/service file by specifying:
          sapctrl$(SAPSYSTEM)
          sapctrls$(SAPSYSTEM)
    Check SAP note 936273.
    Regards,
    Désiré

Maybe you are looking for