Change the Client that J2EE connects to !

Hello Folks,
Our J2EE engine seems to be connected to Client 001(j2ee_admin user is actively occupying the sessions). But our active client is different.
How do we change the client that a j2ee engine connects to? We are in CRM5.0
Thanks

Hi Senthil,
If you want to just change the client then you have to go to the XCM of your application and follow the following link.
Components -> customer -> jco. here you will see the details of the client which you can change.
But if you want to keep the existing client and create another scenario which will connect to the diffrent client then you have to create a new jco, new Application configuration, new RFC connection. In CRM system you have to check the transaction SRMO.
<b>Allot points if my post helps!!</b>
Best regards,
Vikash.

Similar Messages

  • How do I see the clients that are connected to the access point?

    Hello,
    In Wireless Control System (WCS), how do I see all the clients that are connected to the Access Point? I can do a particular search that if I know the mac address. But what I really like to know is that which clients is connected to the network. That means it sould be able to show me, example, Client A is connected to AP 1. The problem in WCS is that I can't do that. Can some please advice how I am able to do this? Thanks.

    Two ways:
    First:
    Under monitor, go to Access Points, then chose the target AP and click on it to open a menu, go to the Current Associated Clients tab.
    Second:
    User the search tool on your upper right corner, type in the target AP name, execute the search, on the results, click view list, on the list chose you AP and then go to the Current Associated Clients tab.
    Enjoy.
    Phil.

  • Is it possible to change the devices that are connected to my iCloud?

    Hi!
    When my mom first bought her ipad last year, I gave her my Apple ID so that she doesn't have to create one and so that we could share apps. However, now that we also have an iPad, we both agreed that it would be much simpler if she could have her own Apple ID. We created her a new one. However, we have discovered that she is still connected to my iCloud and we just can't figure out how to go back and unable her ipad to have access to my iCloud! (which is already used for our computers, iPad, Apple TV)
    Thanks!
    Manon

    On the iPad, tap "settings / iCloud".  You should see a way to delete the current iCloud Apple ID listed near the bottom.  Once it is deleted, just add in her iCloud Apple ID. 

  • Can I change the way that I connect my two computers using migration assistant whithout interrupting the process

    I am in the process of using Migration Assistant to transfer my 2008 MacBook Pro to my MacBook Pro with Retina.  I am currently using USB to transfer and it is taking a long time (as expected).  I am trying to increase the speed of this process.  Am I able to connect ethernet to thunderbolt without stopping the process? Can I just plug in the cable and not have the hault the process, but speed it up? Thanks!!!

    Since you're just sending data, it won't "mess" things up, but you "may" have some cleanup on your hands, depending on what's been transferred. If you want to stop: Command + Q on both machines.

  • How to make a Java application that will change the client box's IP address

    HI how to make a Java application( that application would be run on the client ) that will change the client box's IP address ( IP address of itself )

    If you can do that through the command line, then use Runtime.getRuntime().exec(...) to execute your command.

  • How to change the Client n user details for a model in Production

    Hello Friends,
                         I have an application which is calling RFC function module from SAP R/3.
    In development system while creating Model I have entered the Back end details like Client, User Name and Password.
    If I transport the application into Production, The Client and user name will be different. In this case How would I change the client n user name details.
    Do I have import again in Production. But does sounds a good idea.
    ThanQ for Ur time.
    Cheers.. Sam

    When you create Model first time, to import Interface of RFC you would need to logon into R/3. But once you are done with the Interface, your connection to R/3 will be determined by the client and UID details in JCo connection.
    Now when you transport your code from DEV to QA system, the JCo connection with the same name should be there. or else, you would need to create the same in the new server. I dont see a need to reimport the model. If that is the case, then developers would have to spend huge amount of time doing this job alone.
    Hope this solves ur problem.
    Regards
    Murali.

  • Services in JCo RFC not getting started after Changing the client from 001

    Hi SAP Stars,
                               I have recently Installed Quality and Production servers with PI 7.1 on windows 2003, Sqlserver 2005, when I'm doing Post Activities(http://host:port/nwa) in which I try to change the client from 001 to 300(newly created) in  JCo RFC(4 services) and start the service it is throwing error when I again change it to 001 client and start the service it is getting started, Could anyone help me in solving this issue same issue I facing in PI 7.1 Quality and Production
    Thanks In Advance
    Anil Kumar

    Hi Anil,
    All these JCo RFCs are client specific RFCs.
    Please logon your PI NWA
    Choose Configuration Management - Infrastructure- JCo RFC Provider
    Then, Select the RFC
    Under Details -> Choose Repository Configuraton
    Change the client name to 300 (your new client)
    Save
    And repeat the same for all JCo RFC that you want to work for your newly created client.
    Please ensure that you are using SAPJSF user & correct password for all these RFCs.
    Ideally, these rfcs shuould work now if now please restart your PI  (mostly Java alone also do)
    I hope this helps you.
    Regards
    Sekhar
    Edited by: sekhar on Dec 17, 2009 11:39 AM

  • The vibration on my iphone 5s. i tried restarting it that didn't work. i went to setting made sure vibration was on. i also tried changing the vibration that is set for when my phone rings and it didn't vibrate when i did that. what should i do?

    the vibration on my iphone 5s. i tried restarting it that didn't work. i went to setting made sure vibration was on. i also tried changing the vibration that is set for when my phone rings and it didn't vibrate when i did that. what should i do?

    Check http://support.apple.com/kb/TS5419 and be sure both ends of the connection are properly updated.

  • On update to 13.1, my catalog only shows what was on the camera that was connected.  Where did the rest of my (thousands of) pictures go?

    After installing an upgrade from Elements 11 (it would no longer open, even with uninstall and re-installation) to Elements 13, everything was working great.  Today I did an update to Elements 13.1, and all that appears in mu catalog are pictures from the camera that was connected at the time of the update.  Because I have a small-ish SSD for my OS (Windows 7), the program is installed on the E drive.  The Catalog Manager shows only a single catalog, but I have no idea where it is located, nor where to begin to look for an older catalog file that might be somewhere else.  How do I find and recover my old catalog file?

    juanm66274179 a écrit:
    I found the catalog file in my C drive (207mb) with a modified date of today.  Can I move the file to another drive?  The fact that it is 207mb would indicate that everything should be there- correct?  I have 200+ gigs of pictures and 800+ gigs of video.
    That seems to be the right folder. You can move or copy the whole folder elsewhere and use the catalog manager to browse to the new location. Alternatively, once the new catalog is moved, you can open the Organizer with it by double clicking on the 'catalog.pse13db' file.
    Is there something that changed in the view options to where I am having trouble selecting a "view all" option?  All of the folders are listed in the folder view, but my "people" view is now blank.  How do I get all folders to be viewed in the "all media" section instead of just my last import?
    I have no clue about the 'people' view (I don't use it). By default, only the last import batch is shown. You have a 'sort order' menu on the left of the third line. Choose another sort order. If you are not shown 'All media', you should have a button (arrow shape pointing to the left) on the left of the third line.

  • Changing the Client no in the login window

    when i login to the BW Server. The client no is 001. Since i have to login to clinet 100 each time i have to change the client no .
    Please let me know whether there is any setting to be changed for making the client no as 100

    Hi Balaji..
       I would like to add a little to Phani, if you have multiple application servers and you are always loging to the one perticuler application server just changing the instence profile would be enough(logon groups created).But Balaji you should aware that this change not specific to one perticuler user, once you change the parameter it will be effected to the all the users in that system.
    Regards...
    S.Manu.

  • How do I change the way that my company name appears when googled?

    How do I change the way that my company name appears when it is googled?  Currently it only shows up as part of my company name followed by the website listed below and then the start of a description.  I would like to make it so my entire company name show up as the title when searched.  I used iWeb to create the site.  Please Help!  Thanks:)

    Put the whole company name in the title tag...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html

  • My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

    My parent's IPad is SUPER outdated and I'm trying to buy an app for my brother for Christmas. However, I can't buy the app because it says we need to update the software. The thing is, the computer that was connected to the IPAD, we no longer have. So is there any way I can update it on my mac without erasing all the photos and videos?

    HELPPP ME BEFORE CHRISTMASS MORNING!!

  • On the moment that I connect the Iphone 5 on Windows 8, it is not recognized by Itunes, but actually it appears as a usual USB cable, or as a camera. And then I can't synchronize the Iphone 5 with Itunes. So, what do i do?

    On the moment that I connect the Iphone 5 on Windows 8, it is not recognized by Itunes, but actually it appears as a usual USB cable, or as a camera. And then I can't synchronize the Iphone 5 with Itunes. So, what do i do?

    Hi pedro109,
    If your iPhone is recognized by the computer, but not seen by iTunes, you may need to restart the Apple Mobile Device Service, as described in this article -
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Once iTunes recognizes the iPhone you should be able to sync it with iTunes. See this article
    iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12317
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.  I can CREATE the list but, the songs that I have played don't accumulate in the list.  I haven't changed the steps that worked for me previous to the upgrade.  I have no idea

    Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.
    I can CREATE the list but, the songs that I have played don't accumulate in the list.
    I haven't changed the steps that worked for me previous to the upgrade.
    I have no idea how to fix this and can't find mention of anyone else having a similar problem.
    Any suggestions?

    Click on a station and drag to the left. The playlists sidebar will open up. Drop on the playlist you want to add to.
    tt2

  • How do you change the drive that my Iphone backs-up to on my computer?  My first attempt to back-up and i received a pop-up stating that I do not have sufficient memory/space, knowing that I have over 120GB of free space...any ideas? thanks

    How do you change the drive that my Iphone backs-up to on my computer?  My first attempt to back-up and i received a pop-up stating that I do not have sufficient memory/space, knowing that I have over 120GB of free space...any ideas? thanks

    dave0915,
    iTunes stores your iPhone backups in the Library folder in your Home folder.
    iTunes places the backup files in these places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Create and delete iPhone, iPad, and iPod touch backups in iTunes
    http://support.apple.com/en-us/HT4946
    Regards,
    Allen

Maybe you are looking for