Change the flow of the BPEL service based on WSDL operation

Hi,
I have a wsdl which has three types on operations:
1) SOAP
2) HTTP GET
3) HTTP POST
I have a BPEL process in which the flow need to be decided on basis of operation of the incoming message... i.e; If it is a SOAP then I should execute a particular flow .. similarly if it is HTTP GET or POST I need to perform different activities flows respectiviely.
1) At the BPEL side can I implement this using PICK activity with different branches for different operations in Receive activity ?? If not, Please let me know any other alternative ...
2) Since I have three different types of Protocols of operations (SOAP, HTTP GET, HTTP POST), how do I give input to BPEL through the same partnerlink ?? Should I use three partner links to invoke a bpel process (at Exposed Services side) to receive input from (two HTTP Adapters for GET, POST and one for SOAP operation) ?
Thanks
Edited by: bpeltechie on Jul 2, 2012 4:01 PM

Hi,
Can you make one thing clear please - Your bpel process by definition has 3 operations to start with, or you want to call a WS with 3 operations?
See more information on using SOAP header here: http://docs.oracle.com/cd/E23943_01/dev.1111/e10224/bp_manipdoc.htm#CIHFCBAD
If you need to call a WS with 3 operations, you have to use an invoke activity(x3). Meaning, you can:
1. Seperate your process into 3, according to the needed operation. Each process will execute one operation.
2. Use some logic and call the same partner link 3 times(3 invokes), each time with a different operation.
A pick activity will help you when you want to receive one message or more, and/or you want to have time limitation on the receive.
For understanding the pick activity - in your example, let's say the WS you are calling is a bpel process. Then, it will start with a pick activity, and according to the operation, it will execute the right flow.
Arik

Similar Messages

How change the graph dynamically based on pivot table.

Hi,
My Report having pivot table and bar chart. Organization Name column set as pivot table prompts in pivot table.So Organization Name is appear as dropdown list.If i choose the diffrent Organization Names the pivot table data is according to the Organization Name but no changes in chart.How change the Graph dynamically based on pivot table.
Please help on this.

ok.I created pivot table with 4 columns and created chart using pivot table chart options but all 4 columns are displaying chart.But I need only 2 column in chart ..unable to edit the only chart in pivot table.Please help on this.Thank you..

Error installing PCK: Changing the CPACACHE service failed

I am getting an error while installing PCK at the step "Changing the CPACACHE service failed". The log file says "Error while connecting to DB".
My J2EE server is up and running; I can connect to the DB using the MySQLMaxDB -> Database manager using either of the IDs : "control" or "superdba". I am not able to understand what ID is the installation using to connect to the DB. Under sessions I see 7 connections under id "SAPJ2EDB". I even set the default authorizations to connect to the Db.
Would appreciate any help...

Hello Syed!
Did you find a way to solve the problem?
I run into the same problem, the install fails with the same failure message.
Greetz
Sebastian

Change the end point URL in WSDL for web-service

Hi All,
Morning , could someone please help us with this question, we are stuck with this currently.
In SOA Suite 10g as well 11g we have a jsimple Java class whose one of the methods is exposed as a web service.
In the project it has created the WSDL as well and have deployed the .ear file to the servers from EM console successfully.
Now we need to migrate this web service to testing & production environments.
1. Could someone please let us know the steps as to how do we change the end point url in the WSDL for this web service (present in web content --> WEB-INF/wsdl path in the j-developer project) for migration in case of both 10g (OC4J) as well 11g (WLS) servers.
2. Also could this change/update be done prior to deployment as well as post deployment as well.
Looking forward to inputs regards this...as we are stuck with this ..would be very helpful
Thanks as always for help & guidance..

Hi
As Vijay mentioned, you develop a WebService in JDeveloper and test in JDeveloper integrated Weblogic Server say at http://localhost:7101/MyWebService/MyPort?wsdl. Thats it. Once it is working. Export it into a .WAR file. If you have any other supporting EJB JARs etc, put all these into a full blown .EAR at application level. NOW deploy this .EAR or .WAR into any Domain on any host and any port. DOES not matter. That server's host and port will be taken. Infact even if this other domain is Clustered domain, still it will work by giving webserver host and webserver port that sits in front of the cluster.
I develop my webservices in JDeveloper and test at 7101 port. This .WAR gets deployed in QC Env at qchost:qcport. Same .WAR deployed to UAT at uathost:uatport and finally to prod also at prodhost:prodport.
Its just the Client (WebService Proxy) that is calling this WebService need to use appropriate host and port based on which Env it is connecting to. For this, simply do not hard code WSDL URL in the java code or anywhere. Simply get it from a .properties file using a key value pair like this.
WSDL_URL=http://host:port/MyWebService/MyPort?WSDL.
Now have Environment specific values for above key and put that properties file in that domain root folder. And in your code always refer this key.
You can use many approaches along the above lines.
If your WebServies proxy is a webservice adapter say within bpel, still you can modify the value using deployment plan .xml file file while deploying.
I would not absolutely prefer opening war file from ear and modifying war and updating ear file etc etc. Also do not have multiple EARs for Environment specific. Just have only one single EAR or WAR file that can be deployed to any environment.
Thanks
Ravi Jegga

HT5467 How to change the location service set up when the icon is not inactive?

I can not setting up the location services and change individual location service for each application since the icon are all in the dead icon and I cannot change anything. Is there anyway to make those icons in active?

Here is what I was referring to - when in Control Center, I have the database locations. (sources, targets, OWF etc). Under a database location I selected the connector/location name under Connectors. When I select Deploy Action to Drop the connector/location name will remain. However, if you were to check in the database or the Repository Browser (Locations Report) you will see that the db link is gone. At this point you can safely modify the Locations info in the Connection Explorer (in Design Center). On the other hand, if you want the location to be deleted all together then now you can delete it in the Connection Explorer panel. If you did the prior drop step then at this point all db link info should be gone from the database.

Change the default service order type for repair order - RA

When creating a repair order (RA), a service order of type SM03 is triggered. The default order type is SM03. How can I change the order type?
Thanks in advance...

hi,
try to change in OIOL and check ..
regards
pushpa

How to change the web service address of NetBeans generated WS client

I am currently experimenting with web services using netbeans and Sun Application Server.
Basically I am creating simple web services using net beans and then deploy them on the app server and then create another pfoject with web service reference to that web service to invoke the service.
My problem is when a project is deliverd to the production site the the client applications web service reference will need to be configured to refer to the production web service address. But when I looked at the generated web service client code the address is hard coded.
How can I change the address to the web service of a web service reference created in net beans either using some configuration file (without having to recompile the client) or at runtime.
Thanks in advance

bump...

Changing the selection screen based on the option in list box option

Hi Experts,
I have a list box parameter in my selection screen,
i have four options and i am changing my selection screen based the option selected.
see my code below,
at selection-screen output.
GS_VRM_VALUES-KEY = '1'.
GS_VRM_VALUES-TEXT = TEXT-S02.
APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
GS_VRM_VALUES-KEY = '2'.
GS_VRM_VALUES-TEXT = TEXT-S03.
APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
GS_VRM_VALUES-KEY = '3'.
GS_VRM_VALUES-TEXT = TEXT-S04.
APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
GS_VRM_VALUES-KEY = '4'.
GS_VRM_VALUES-TEXT = TEXT-S05.
APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
CLEAR: GS_VRM_VALUES.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      ID                    = 'P_DROP'
      VALUES                = GT_VRM_VALUES
EXCEPTIONS
    ID_ILLEGAL_NAME       = 1
    OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT SCREEN .
    CASE P_DROP .
      WHEN '1'.
        IF SCREEN-GROUP1 = 'M2' OR
          SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
          SCREEN-INPUT = 0.
         SCREEN-ACTIVE = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
        ENDIF.
      WHEN '2'.
        IF SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
          SCREEN-INPUT = 0.
         SCREEN-ACTIVE = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
        ENDIF.
      WHEN '3'.
        IF SCREEN-GROUP1 = 'M2' OR
            SCREEN-GROUP1 = 'M4' .
          SCREEN-INPUT = 0.
         SCREEN-ACTIVE = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
        ENDIF.
      WHEN '4'.
        IF SCREEN-GROUP1 = 'M2' OR
        SCREEN-GROUP1 = 'M3'.
          SCREEN-INPUT = 0.
         SCREEN-ACTIVE = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
        ENDIF.
      WHEN OTHERS.
        IF SCREEN-GROUP1 = 'M2' OR
           SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
          SCREEN-INPUT = 0.
         SCREEN-ACTIVE = 0.
      screen-invisible = 1.
          MODIFY SCREEN.
        ENDIF.
    ENDCASE.
ENDLOOP.
my problem is when i change the option in the list box, the particular modify group ie, the screen is getting changed only after i press enter, So please suggest me how i can change the screen without pressing enter.

Hi,
without using VRM_SET_VALUES...you just create one data element by going se11....create one domain for it...now give the values in the "value range" tab....and at the time of declaration just write ..
PARAMETERS var1 TYPE <your created data element>
                    AS LISTBOX VISIBLE LENGTH 20
                    USER-COMMAND onli
                    DEFAULT <one value>.
You will get the same effect as list box....and make it mandatory..
Arunima

Change the condition type based on sales document type

Dear ALL,
I have created a condition Zxxx which is a fixed calculation type for the documents created by the upload from external tool to SAP. I created this condition because external tool is using a 15 place decimal which SAP doesn't allow and if the normal condition type Zyyy is used SAP calculates once in SAP and there are rounding issues. What the Zxxx condition type does is accept whatever value is sent up from external tool to SAP, regardless of the quantity. The problem is that whenever they create a credit with reference, in SAP and they want to do a partial credit, the Zxxx doesn't take the partial quantity into consideration and doesn't change the value.
Is there a way to force SAP to change the condition type from Zxxx to Zyyy based on sales document type without recalculating the whole document because that would again, cause rounding issues. We would need to have the calculation done only on quantities changed in the credit memo request .
please advice me. your inputs are highly appreciated.
TIA
KOGI

Dear ALL,
someone please help me with this issue. your inputs are higly helpful.
TIA
KOGI

Need to change the Idoc Status based on the Text in the Idoc

Hi All,
I have developed Idoc--SOAP Sync Process Scenario Using BPM and Works Perfectly.
I have used STATUS.SYSTAT01 Idoc to capture the Response that is comming from the Webservice.
I have mapped the response Text( Success or Fail) to one of the field in the Response Idoc, this is perfect.
Requirement:
1) If the Response Idoc Field receives Success Text means the Idoc Status shld be in Green Status.
2) If the Respnse Idoc Field Receives FAIL means the Idoc Status shld be in RED Status.
How can i Do this. please suggest me......
Regards

Hi Santhosh,
YES, I have to Capture the Response from Webservice in SAP R/3 by using STATUS.SYSTAT01 Idoc.
I have mapped the response from webservice to the one of the field in the Idoc.
If this field contains Success as text means the Idoc Status in We05 shld be 53 else it shld be 56
With out changing the FM code, can we use any other process to achieve this???
@ Mario
Can u please Allobarate your views more based on my requirement
Regards

Oracle database Adapter starts up even before the BPEL services & errors

Here is the scenario:
We have an Oracle database adapter in an ESB service polling a table & then invokes a BPEL service.
During startup, the database adapter is loaded first & polls data & immediately invokes the BPEL which is not even loaded still & errors.
Is there a way to avoid this.
Any help would be great.

All three of your errors seem to be pointing to a configuration gap between
* the JNDI name used by the SOA composite to obtain a JCA connection in the soa-infra engine
* the ConnectionFactory configuration used by the DbAdapter process that then connects to the JDBC connection pool managed by the WebLogic server
* the actual JDBC connection from WebLogic to your database
You've indicated the JDBC connection layer from WebLogic to the database has been verified so the following things should be checked:
* access the WebLogic console of your domain and verify the DbAdapter application is deployed and active on the server hosting your soa-infa SOA engine
* click on the DbAdapter entry and go to the Configuration tab and the Outbound Connections sub-tab
* expand the tree under javax.resource.cci.ConnectionFactory and verify your JNDI name within the SOA composite is listed (it probably looks something like eis/db/yourdbname)
* click on that JDNI name and verify on the subsequent screen that the JDBC connection pool name is present under dataSourceName or xADataSourceName
* verify your SOA composite is using eis/db/yourdbname as the reference in its database service --- it CANNOT use the JDNI name of the JDBC connection pool managed by WebLogic cuz composites run inside the soa-infra engine which uses JCA connections to get out of the soa-infra engine to the rest of the world
Hope that helps

Can we change the partner number based on the reason in CIC0 in CRM ?

Dear Experts,
Can we change the responsible partner number based on the reason in CIC0 in CRM ?
regards,
Abhijit G. Borkar
Edited by: Abhijit Borkar on Jul 10, 2009 6:46 AM
Can it be done by using 'Actions' ?

Hi Abhijit,
Yes you can do this a number of ways:
action
badi - partner or order
event - custom function module
Remember that the partner determination must allow for this partner to be changed.
Cheers
Andrew

Change the row colors based on column values in MOSS 2007.

Hi Team,
I am using MOSS 2007 environment. In that I am having one SharePoint list. In that list based on column values rows colors need to change.
Kindly help me anyone on this.
Thanks,
Ashok

Hi Ashok,
Please follow the below link:
http://www.contentmaster.com/sharepoint-2010/conditional-formatting-of-list-views-for-sharepoint-2010-changing-the-font-colour/
http://sharepoint.stackexchange.com/questions/7478/highlight-row-color-based-on-field-values-in-sharepoint-2010-list-view
Best Regards,
Brij K

How to trigger the next service based on the last service (Performance Base Plan)

Hi Experts,
If im using the Performance Base Maintenance Plan. and set the service is every 5000km. if i send my vehicle for sevice at 6000km. how the system can trigger the next service on 11000km instead of 10000km.
Thanks
Regards

5000 KM once is the planned one. If you are sending at 6000 KM or 6500 KM, this is unplanned one. System will not consider the unplanned orders. So its not possible to have at 11000 KM automatically.
Either you have to create new Maintenance plan starts with 6000 KM with the cycle of 5000 KM & deactivate the old plan.

How do we can change the last done dates of Planned operation by EM orders?

Hi colleagues
i defined four opertions for one equipment as performance based or time based plans and scheduled it for next month. then we received a EM notification for mentioned equipment. we iisued order for EM notification and maintenance opertor carried out the orders but while he doing the EM process , he did two opertion of preventive maintenance from mentioned plan.
we can add mentioned operations in EM orders as operations but the question is that after we confirm the EM orders and enter the actual dates , and it seems that the last done dates of assigned two operations must be change in PM plans.!
Is there any solution for it or not?
Thanks
Akbar

Hi Carlos
thanks for ur attention
actually i want change the last done dates of some opetions in my scheduled maintenance orders by assigning them to EM orders as operations.
for example:
i received a EM orders with this description : oil leakage from sight glass of hydraulic pumps
in the proceesing of EM order , i will eliminate the leakage and also change the oil of pump .
the changing the oils is the one of our shecduled Maintenance plan that is it would be called on next month.
in the confirmation of EM order , i will add this operation from equipment task list ( change the oil) and enter the dates and another data.
it's obvious that mentioned opertion should not be schedule on next month and according to it's package sequence , the new date for changing the oil must be 3 month later form the date that we entered on EM order.
Thanks
AKBAR

Change the flow of the BPEL service based on WSDL operation

Similar Messages

Maybe you are looking for