Change the default service order type for repair order - RA

When creating a repair order (RA), a service order of type SM03 is triggered. The default order type is SM03. How can I change the order type?
Thanks in advance...

hi,
try to change in OIOL and check ..
regards
pushpa

Similar Messages

How to change the default IDOC basic type from CREMAS05 to CREMAS04.

Hi All,
How to change the default IDOC basic type from CREMAS05 to CREMAS04 when sending Vendor Master Data.
When I generate partner profile, the system will add the latest version of IDOC type which is CREMAS05 to the Outbound message. In my project, I'm asked to use CREMAS04.
I want to use BD14 to send master data directly, but the program will generate IDOC using CREMAS05. Is there a way that I can change it to CREMAS04? And also for using Change Pointers, I want to use the report RBDMIDOC, but i have the same problem.
Thanks
Sai Krishna

execute WE20 and edit the outbound parameters
here is a pretty good example: http://documentation.softwareag.com/webmethods/sapr3_gateway/sap231/pages/sapdist.htm
Edited by: Jürgen L. on Sep 7, 2011 9:49 PM

Defaulting Rules Not Working for Repair Orders in OM?

Hi,
Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
But in our project we are using Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
Please help me to solve this issue ASAP.
Thanks,
Kishor

Hi,
You have like this:
1. Price list
2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
You have to make
1. XXOE_DEFAULT_PVT.custom_code
2. Price list
3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
Did you made own custom code to pick currency?
Regards,
Luko

T-Code for changing the default Exchange Rate reference for creating PO?

Dear All,
Can somebody kindly give me the T-Code for changing the default
Exchange Rate reference for creating PO? Is there a Step by Step
procedure before changing the default exchange rate?
Thank you in advance.
Regards,
Gopesh

Hi
There is not such Tcode to change the default exchange rate from the PO.
If you want you can confugure the exchange rate in the following path in the IMG,
SPRO>MM>LIV>Incoming Invoice>Configure How Exchange Rate Differences Are Treated
Hope it helps you.
Cheers
Umakanth

Is there a way to change the default Save As location for Adobe Reader XI?

Is there a way to change the default Save As location for Adobe Reader XI?

kel-drago wrote:
Can't be that difficult to arrange.
No, it's not. But someone has to request it: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

How do I change the default file saving type

I have seen this question all over the web, but none of the answers I have found apply to my version of Photoshop (CS5).
I want to change the default file type when I save files. I don't want PSD or PDF, I want PNG.
I want to hit CTRL + SHIFT + S like normal, but I don't want to select PNG from the drop-down menu when I go to name my items.
I don't want to create an action for each file I work with - I want this to be a default setting change across all of photoshop on every file.
Any help? Adobe has been of zero assistance.

I have already tried the "Actions" method - which is glitchy in and of itself!
What I am doing is very simple - I am making photo slide shows. I create a new file that is 1920 x 1280 (the size of my display) and then I open 100+ images. I copy and paste each image into the 1920x1280 file so that all images display the same on my screen when I run the slides. I re-size and adjust the position of each image so it appears how I want.
So I copy and paste my first image into the 1920x1280 canvas and then hit F2 (the button I applied the save as PNG action to). It saves the file. Then I copy and paste another image into the file and hit F2. Rather than creating a new file (or even a copy) Photoshop writes over the last file I made. YAY! More wasted time!
It blows my mind that a function as simple as "Change default file type" is missing from such an expensive, accredited program. How can their software engineers overlook something that hundreds of other people (like me) have posted a need for online? Something so simple? Andy why is it my job now to learn how to do scripting for Photoshop to add in a feature that should be standard? Is that why I pay $50 a month for this software or why I bought CS5 outright for more than $1000?
So that's what I am trying to do - make a slide show where each image is exactly the same size. It seems the only option Adobe gives me is "WASTE MORE OF YOUR TIME"

Changing the default logical system names for adaptive RFC models

Hello,
When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
Thanks in advance!
David.

Suresh,
Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
Hope that clears up what I'm looking for.
David.
Message was edited by:
David Z. Pantich

How do you change the default Save As location for PDF files?

I have not been able to find a straight answer anywhere. I am scanning documents to my email then I need to save them. Instead of saving them to the last folder I saved a file in, (which would be logical) it saves them in a temporary files folder EVERY time. I have seen answers about how to change the folder when saving documents from a web browser but that is not what I am doing. Someone please help! I have thousands of files to save and this is incredibly frustrating. Agh!!!

Is it your scanning software that does that, or Adobe Reader?
Anyway, I don't know how to change the default change destination for either of it.
I have had a similar problem with an entirely different software, so what I did is create a shortcut to the destination folder in my Temp folder, so a simple double-click when saving gets met quickly to that target folder.

How do I change the default "Save As" location for pdf docs?

I save a lot of scanned in pdf documents. However, when I open up a new .pdf file and wish to "save as" to a specific location in "my documents" the default location always directs the newly saved documents into th "temporary files" location. I would like to change the default location to "My Documents" instead so I do not have to redirect every newly scanned document to "My Documents" form the temporary file area of my computer. Please inform.

I got the same problem, I cannot even see where the files are saved after I press "Save" button and cannot change the name of the file that I am saving.

How can I change the default start-up date for a new functional location?

Is there a way to change the default date when creating a functional location? Whenever we create a new functional location, there is a date populated in the start-up date field. This date is our go-live date from last year and I cannot find the location in the IMG (if there is one) to stop the date from automatically populating with the date from the superior functional location. I tried setting the field from input to required but the date still populates automatically. Does anyone have any suggestions on how to leave the start-up date field blank when creating a new functional location?

That field is generally picked up from the immediate superior FL in the hierarchy through the inheritance functionality.You will have to overwrite this date.I dont think you can clear this field through Configuration functionality.
If you are in Ecc 6.0, you could get the help of developer to use implicit enhancement to initialize the field contents.
Regards
Narasimhan

Chaning Order type for Internal order

Hi ,
We have created a wrong order type for IO and we wants it to get changed.
I understand that Order type is something that cannot be changed.
Let me know whether the below steps are correct -
1. Close the existing wrong order by setting the deletion indicator
2. Create a new order with the correct order type
IF there are any others ways that could be followed, it will be great if you could provide such info.
Also, let me know if any thing else to be taken care in this situation.
Regards,
Sridevi

Hi,
The steps you have told are correct. Go ahead and do it, if case of any issue, come back. Just ensure that you have no actuals bookes, if they are you need to reverse them.
Regards

Order type for planned order in repetitive manufacturing

hi
In repetitive manufaturing there is no prodcutiion order
planned order only. so i want know what is order type for repetitive manufacturing
In configuration order type for reptitive is required or not if yes then how will define order type ,where
In Discrete order type will define to control prodution order
like that i want know details about order type in repetive manufature
ravikumar

HI
Planned order in REM is of PE type thar s non convertible in PO and also these planned orders are assigned to PVs thru Planning table and the Confirmation is done agianst these planned orders.
check these links:
Re: order type in repetitive manufacturing
http://www.sapfunctional.com/PP/REM/page1.htm
Regards
Anupam Sharma

Changing the default location PowerPoint uses for templates

I do not want to use the default location MS Office initially configures for templates that is buried in some obscure folder on a local machine in that only Office know about. Instead want to keep my templates in the same location on a company server
with the rest of my materials so I can access it from my company laptop or from the Virtual machines I am forced to use in other company locations. This way I will have my templates everywhere I work. When I make changes they are available to me everywhere
I work and are not buried in a folder on a laptop or a virtual machine in a conference room half a world away.
MS Word allows users to configure this default location for templates but no where in PowerPoint can I find any way to configure this location. Previously on my laptop I have been able to configure the default PowerPoint template location, I believe, by
setting the location in MS Word; however, this is not happening for me now on the virtual machines I am using when away. I have scoured the Options settings and if it is there it is well hidden.
To make matters worse I am trying to use what PPT is providing to me while I sort this out and when you try to open "My Templates": there is a message that says:
"To add a template to My templates, click the File tab, click Save As, click Trusted Templates, and then save the file as a template."
Of course when I follow these instructions there is no folder named Trusted Templates on the left side of the dialog box. I am not sure why it is so difficult to allow us to configure this ourselves for each program but apparently it is.

Hi,
Please refer to this kb below:
http://support.microsoft.com/kb/924460/en-us
As mentioned, if you use Word 2007 or Word 2010 to change the location in which your new templates are saved, you also change the location in which all 2007 Office program templates or all 2010 Office program templates are saved.
Office programs use one registry key to record the user templates file location, you can browse to the following path to check if it's recorded:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common\General
The user templates location is stored in the
UserTemplates
string value.
If it doesn't exist, try to manually add it, check if this helps. Detailed information can also be found in the kb introduced above.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps
carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry:http://support.microsoft.com/kb/322756/en-us
Regards,
Melon Chen
TechNet Community Support

Change the default of Free/Busy for an event in Outlook 2010

Is it possible (as it was in old version) to set the Show As default for events?
Thanks

Hi,
The ‘Free/Busy’ information is used by the people who send Meeting requests, to determine whether a person is free or busy so that, they can know their availability status for Meetings. Below is a tutorial that will show you how to change the
Permissions for viewing a particular person’s Free/Busy information.
To change the Permissions for your Free/Busy Information, do the following
1) Click on the ‘File’ tab and then on the ‘Options’ tab.
2) In ‘Outlook Options’ window, click on the ‘Calendar’ tab.
3) Now inside the Calendar tab, under the ‘Calendar Options’ category, click on the ‘Free/Busy Options’ tab.
4) Now in the ‘Free/Busy Options’ window thus opened, you can choose to publish a certain number of Month’s calendars that contains your Free/Busy information and also change the time interval for updating your Free/Busy information.
5) You can also have your ‘Free/Busy’ information published on a particular Web location. To achieve this, select the checkbox that says ‘Publish at My location’ and in the space provided below, enter the specific location and click
on ‘OK’.
So, this is how you can change Permissions for viewing the Free/Busy information.
Sincerely

JDeveloper settings - change the default code editor view for JSPx files

Hi, when you open a .JSPX or JSP page the editor opens in 'design' mode. Is there a way to change this default behavior and open in 'source' mode? I write the JSF/JSP pages editing code and every time I open a new page I have to wait till the IDE opens in view mode and then manually switch to source mode by hand.
Thanks
Jordi

A year and a half after this post, and I still have this same issue as well. Even 10.1.3.3 has it.
Thanks for posting the solution as this will now save me lots of time waiting and often re-starting JDeveloper.

Change the default service order type for repair order - RA

Similar Messages

Maybe you are looking for