Change the mapping generation code from sql*loader to pl/sql

I want to use a mapping with a flat file operator to generate pl/sql code even if a mapping generate sql*loader code as default.
I tried to change the Language generation property of the mapping but an API8548 error message is shown. The suggested solution by OWB is to change the language generation code in the property inspector of the mapping.
I can't use external table because I have to work with a remote machine.
What i have to do to change the generation code from SQL*Loader to PL/SQL?

How about breaking this out into 2 mappings? In the first mapping, map a flat file operator to an table using SQL*Loader code. Then define a second mapping using the table as source and therefore generate PL/SQL. Then use process flow to launch the 2nd map to run after completion of first.

Similar Messages

  • Change the language of iphone from English to Chinese and iphope are not  normally loaded and not opened. what can I do to restore it;

    change the language of iphone from English to Chinese and iphope are not  normally loaded and not opened. what can I do to restore it;

    I found a fix for it, It turned out that the file that lists all of the songs on it got corrupt. I had to use 3rd party programs but it did work out in the end
    Here is a link to where I found the fix: https://discussions.apple.com/thread/3631590?start=0&tstart=0
    I followed the instructions of Geekdad3 a little bit lower on the page.
    Good luck for anyone else who has this problem

  • Changing the default port 1433 in SQL 2005 on an ECC 6.0 system

    Hello everybody,
    There is a requirement to change the default port of MS SQL 2005 from 1433 to a different port.
    I am using SAP ECC 6.0 running on an ABAP stack. I would like to know what changes need to be done from the SAP end to achieve it.  Any pointers in this regard would be helpful.
    Regards
    Dinesh K

    <b>Sizing</b>
    Hardware sizing should be completed by your SAP partner. Its based on many things. Users, modules, storage volumes, peek, BP, workloads etc etc.
    You can do the 'noddy' version with the sapsize on OSS. The output from this is in 'SAPs' you could look up std systems bench marks and get something 'like' it. Else submit the results to the hardware vendor of your choice and they will do it for you.
    <b>System Redundancy</b>
    Depends what you are trying to do.
    MSCS is a fail over HARDWARE only solution. ie if you want to patch or take a node out of service you can by 'failing over' the services on it to the other node. If you get a DB problem MSCS can not help you at all.
    Log shipping gives you 'rapid' recovery options for SQL(and there in SAP). The way this normally works is via either manual or automatic log-shipping to a 'standby' system with SQL/SAP loaded on it that can be brought online if you get a problem with the main system.
    A well planned system will have fail-over and recovery capabilities, ie it will use BOTH.

  • How do you change the Print Products Store from USA to UK like you can do in IPhoto?

    How do you change the Print Products Store from USA to UK like you can do in IPhoto?

    Please keep in mind that Aperture is not an enhanced iPhoto, it is a different application with a different philosophy and a different intended audience. If you approach it with that in mind you will have a lot less frustration as you learn Aperture.
    Aperture adds a layer of complexity that is not needed by many.  iPhoto is a very powerful application and fits the needs of many amateur photographers.
    As for your original issue, as I said I am surprised that iPhoto allows you do switch countries like that and am not surprised that Aperture doesn't. If this is something you really need to do working in Aperture but using iPhoto to order the prints is a good work around and will not be all that difficult to do once you get the hang of it.
    As for your new question, the books in iPhoto and Aperture are different enough that the code that created the book in iPhoto wouldn't work in Aperture. What happens when you import an iPhoto library into Aperture is that the images in the book are combined into an album in Aperture with the same name as the iPhoto book. You will need to re-create the book in Aperture uaing the images in this album.
    Hope this helps, post back if you have anymore questions.
    regards

  • How can I change the formate of @today from (MM/dd/yyy) to (dd-MM-yyyy)?

    I am in openscript, using a settext commend - .setText("{{@today(MM/dd/yyyy), 10-02-2011}}}}"); is anyone know how can I change the formate of @today from (MM/dd/yyy) to (dd-MM-yyyy)?
    I went to Java Code tab and tried to use - new SimpleDataFormat("dd-MM-yyyy").format(new Date()); but not successful. Any help will be appreciated.
    Katherine

    Hi,
    you can display the date format in dd-mm-yy by using the below Java code.
    First import the bellow java classes.
    import java.util.Date;
    import java.text.SimpleDateFormat;
    //and add bellow code in run() function
         //************ Display Date and Time *************
         Date date_format=new Date();
         SimpleDateFormat dateFormat = new SimpleDateFormat("dd-mm-yyyy");// HH:mm:ss");
         String Exec_Time = dateFormat.format(date_format);
    //output statement
    info("Today's Date: "+Exec_Time);
    I can able to add the screenshot of this output here, so if you need any other information please write to me.
    Regards,
    MRSN

  • How to get the HTML Source code from the active browser ?

    Hi All,
    I need to get the HTML Source code from the active browser (IE). I tried with the below code, but I am not able to get the Source code all the time, with respect to the different applications (http or https) and the user authentication has to be changes in few applications (_I dont know or not able to given that in the below code_). More over there is also a dependence of the URL to get the HTML Source code.
    Therefore what I feel is getting the HTML Source code from the given or active browser will be consistent than the URL. Since the Source code is available in the browser (IE) . Please help me with a sample code to achieve this . . . !
    HTMLDocument doc=(HTMLDocument) kit.createDefaultDocument();
    doc.putProperty("IgnoreCharsetDirective", Boolean.TRUE);
    URL url = new URL(strURL);
    Reader HTMLReader = new InputStreamReader(url.openConnection().getInputStream());
    kit.read(HTMLReader, doc, 0);Thanks in advance,
    Regards,
    Jothi Venkatachalam
    Edited by: j0o on May 7, 2009 3:11 AM

    The simple answer is: you don't.
    Not only is it simply not possible, but the entire concept of "the active browser" doesn't exist.
    You were on the right track with your code to retrieve the page directly from the server, but as you noticed that code will only work for regular http connections.
    For https and other protocols you will need to use appropriate libraries for each protocol. Something like Apache Commons can help you with that. There are networking libraries in there for a lot of commonly used protocols.

  • [svn:fx-trunk] 8474: * Fixed the AST generation code path of Vector typed variables and

    Revision: 8474
    Author:   [email protected]
    Date:     2009-07-09 07:20:32 -0700 (Thu, 09 Jul 2009)
    Log Message:
    Fixed the AST generation code path of Vector typed variables and
      properties with Bindable.
    tests Passed: checkintests
    Needs QA: YES
    Needs DOC: NO
    Bug fixes: SDK-21587
    API Change: NO
    Reviewer: Peter D.
    Code-level description of changes:
       AbstractSyntaxTreeUtil.java
         Modified generateParameter(*) to use generateTypeExpression().
       binding/BindableSecondPassEvaluator.java
         Modified generateGetter() to use AbstractSyntaxTreeUtil.generateTypeExpression().
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-21587
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/AbstractSyntaxTreeUtil.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/BindableSecondPassEva luator.java

    I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
    So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
    In the Xorg log, the differences are:
    without 'nouveau.noaccel=1'
    [ 30.761] (II) UnloadModule: "nv"
    [ 30.761] (II) Unloading nv
    [ 30.761] (--) Depth 24 pixmap format is 32 bpp
    [ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
    [ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 30.777] (II) EXA(0): Driver registered support for the following operations:
    [ 30.777] (II) Solid
    [ 30.777] (II) Copy
    [ 30.777] (II) Composite (RENDER acceleration)
    [ 30.777] (II) UploadToScreen
    [ 30.777] (II) DownloadFromScreen
    [ 30.777] (==) NOUVEAU(0): Backing store disabled
    [ 30.777] (==) NOUVEAU(0): Silken mouse enabled
    with 'nouveau.noaccel=1'
    [ 1191.621] (II) UnloadModule: "nv"
    [ 1191.621] (II) Unloading nv
    [ 1191.621] (--) Depth 24 pixmap format is 32 bpp
    [ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
    [ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
    [ 1191.621] (==) NOUVEAU(0): Backing store disabled
    [ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
    [ 1191.621] (==) NOUVEAU(0): DPMS enabled
    So now 3D acceleration is disabled.
    I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
    I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
    Last edited by berbae (2013-03-27 10:07:42)

  • How do i change the Std. confirm key from 'AB' to 'Z1', receiving ACK IDOC.

    Hi,
    How do i change the Std. confirm key from 'AB' to 'Z1', when loading ACK IDOC.
    Thanks

    Hi Jorge,
    Thanks for your help.
    I change the output mode to "Collect IDocs" method, if I use SAP standard function POIM (RCCLMDAT), it will depend on change pointer to generate IDoc, and it includes function: RSEOUT00 ( and MASS_RSEOUT00 ) to collect and send IDoc.
    The collect table is BDCP.
    BR,

  • Get the connected users count from sql server using powershell

    Hi,
    I am working on SharePoint 2013,I am having SQL server 2012.
    I want to get the Connected Users count from  sql server using power shell.
    Can any one please let me know how to implement.
    Thanks in advance.
    Regards,
    Phani Kumar R

    Sorry Tom, I dont like to hear "There is no way" :-(
    There is always a way in computer to get what you need (at least it is good as Rule of thumb). I am not sure we will find it here (in a voluntary supporting forum).
    Now we (or better the architect of their system) should think of the way :-)
    Of course doing so in the forum, while we do know the system and only got a glimpse on what is needed, is not the best idea. I will point some issues which can be related to a solution. Those are not a solotions as it is but something we can use for a solution
    once something look in the right way.
    * A web connects counter is one of the easier thing to do. The basic idea is just to use the connect event and the disconnect event an adding 1 or removing 1 from the counter. This is best to do in the application using static variable as any way the second
    the application is down the counter can be go to hell as we know there is no one connect (there for a counter do not use database usually). Using a web dot-net (or asp 3) application this is done most of the time using the global.asa/global.asax file, which
    include the application and session events. for example using the method Session_Start
    protected void Session_Start(object sender, EventArgs e) {
    // Code that runs when a new session is started
    * IIS have a build-in loging system where we can log each and every request/response or only logins users. There is lot we can do with this log files including data mining. Using small bulk insert script we can use the SQL agent to insert those logs to the
    database and get the information we need.
    * any web developer i want to believe know about the Fiddler application which we use to monitor traffic. A proxy is not the only way to to monitor traffic (it is not good for our case as this is in the client side), there are several option in the server
    side.
    * SQL trigger on logon can be use to get information on who is loging on and can be logging only specific source (like our sharepoint IP or any sharepoint application). This information (what is the application which connect to the server can be retrive
    in several solution without using a trigger as well)
    *** (I'll be brief ... I'm getting bored... probably the reader feel the same)
    * using extended events and/or profiler we can monitor any connection and save the data or just remember it in shared (static) variable (this
    blog show how to do it by the way). Again we can monitor specific application or use any filter in order to get only the sharepoint users
    .... and i can continue for several days more :-) ...
    "If there is a willing, then there's a way"
    "If you can't do it, Then someone else probably can"
    "Never say never"
    I hope this help somehow :-)
    [Personal Site] [Blog] [Facebook]

  • Is there any Impact if we change the Valuation Grouping code.

    We have 2 valuation grouping codes
    0001 For US plant and 0002 for Europe
    For 0001 GR/IR clearing is 200000
    For 0002 GR/IR clearing is 200001
    We have 2071 plant is there it is assigned only for company code 430.
    It is belongs to Europe plant. But they are assigned to 0001valuation grouping code.
    Now they want to change the valuation grouping code for CC 430 from 0001 to 0002.
    I have verified in OBYC transaction for 0001 and 0002 all the valuation classes and GL accounts are same, exepet GR/IR clearing account.
    After changing the grouping code it will change the GR/IR account for CC430.
    If you need more information please let me know.
    Thanks
    Ravi

    not answered

  • How to Change the Default SSH Port from Terminal ?

    How to Change the Default SSH Port from Terminal ?

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

  • How to Change the Default SSH Port from Terminal ? now showing default SSH Port 22 i need change it pls help me how can do

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

  • Mail -- How can I change the default email account from which my messages go, without having to change it each time I draft a message?  It currently assumes an email account that I rarely use. Thanks.

    How can I change the default email account from which my messages go, without having to change it each time I draft a message?  It currently assumes an email account that I rarely use. Thanks.

    sorry, but I can't find the mail preference in the latest Yosemite OS. Do you know where I can find it?
    Thank you
    Don

  • Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • Change the backend doc type from PR to PO in BADI BBP_TARGET_OBJECTS.

    Hi,
    We have followed below approach for backend document type determination.
    1. A custom function module contains the logic to determine the backend document type of a Shopping cart line item. THis function module, performs many checks and hence cannot be called in any BADI that is executed in Foreground.
    2. I am using BADI BBP_TARGET_OBJECTS to change the follow document type by calling the custom function module.
    Issue here is, if the backend document type of a line item is Purchase requisition (2) by SAP standard, and if I try to change it to Purchase order, it gives run time error and ends up in creation of Purchase order.
    After further investigation I found that this line item (with default backend doc type as 2) has a desired vendor. If we change the desired vendor of this line item to fixed(To Partner function 19 from partner function 39), it allows us to change the doc type from Purchase requisition to purcahse order in BADI BBP_TARGET_OBJECTS.
    But changing the partner function is possible only in BBP_DOC_CHANGE BADI, and I cannot call the custom function module there, as it may impact the performance.
    Is there any other way, I can change the partner function in any of the BADIs called in background?
    Or Is there any way by which I can change the backend document type from PR to PO in BBP_TARGET_OBJECTS?

    Hi Parab
    if you swaping 39 to 19 viadoc change badi
    REQUESTER has a control on Purchase ORDER Vendor and BUYER lost a control so your business has to decide.In this case procurement department lost their control.
    Fixed vendors are like inforecord and contract negotiated for best price ..
    Muthu

Maybe you are looking for