I have a AT&T wifi box and it is turned on and when I go to the setting to go to it it's not there how do I fix that so I can get back on my wifi

I have a AT&T wifi box and it is turned on and when I go to the setting to go to it it's not there how do I fix that so I can get back on my wifi

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:                
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

  • The wi-fi on my iphone 6 is "locked", even though the password correct and has been accepted. How do I unlock it so I can get back on the 'net?

    The wi-fi on my iphone 6 is "locked", even though the password correct and has been accepted. How do I unlock it so I can get back on the 'net

    Only the carrier to whom the device is locked can unlock it.
    StraightTalk is not a supported carrier... not all features may work.

  • If i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

    if i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

    If you want both iPad to be identical .....
    Without connecting your iPad to your laptop, start iTunes. Go to iTunes>Preferences>Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    Now connect your iPad to your Mac and start iTunes.
    When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases.
    After it finishes transferring all your apps to the Mac, right click on your iPad and select Backup your iPad.
    Sync the iPad and eject it when it is complete.
    Quit iTunes
    Connect the second iPad.
    Launch iTunes
    Right click on the iPad name on the left side and select - Restore from Backup
    Select the backup of the first iPad and let it restore from that backup.
    When it finishes restoring - sync with iTunes to transfer all of the apps and any other content that you want onto that iPad
    Eject the iPad when you are done.
    Check the second iPad and if all of the content did not sync as you wanted - or you want to remove some of the content - connect it again and then choose the content that you want - uncheck what you do not want - and click on Apply in the lower right corner of iTunes.

  • I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

    I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

    Hi Francis,
    Are you getting kernel panics?
    http://support.apple.com/kb/TS3742
    http://www.thexlab.com/faqs/kernelpanics.html

  • I updated my ipod touch 2G on a different computer, but now it won't work on my old computer.  How do I fix it so I can get it to work on my old computer?

    I updated my ipod touch 2G to 4.2.1 on a different computer, but now it won't work on my old computer.  How do I fix it so I can get it to work on my old computer? Previously it was running on 4.1

    To recognize your iPod touch on your Mac, AMDS has to be installed.
    To reinstall follow this article:
    iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier

  • I have a video that is 1920 x 1080 14.99fps, when I load in Premiere 1080p30 it appears to be moving in slow motion, How do I fix that?

    I have a video that is 1920 x 1080 14.99fps, when I load in Premiere 1080p30 it appears to be moving in slow motion, How do I fix that?

    I am having the same problem, which I can explain a little better: A clip which is actually 29.97 fps (verified using QT properties) is importing as 1/2 framerate, or 14.985 (rounded up to 14.99) fps. This happens with several of my clips, regardless of the import method used (drag/drop from OS, right-click/import, or use Media Browser). I cannot interpret the footage back to 29.97, as doing so doubles the speed of the audio (an interview) making it unusable.

  • I am trying to download the latest version of Adobe and when I go to the Downloads place on my PC, it's not there. How can I make sure Firefox is not blocking

    I know I have the latest version of the browser (because it told me so). When I hit the Download now button for the Adobe and indicate that I want to save it, it seems to take, but when I go to the Downloads on my Computer, it isn't there. I don't know where else to look or what else to check. I think I have successfully done this in the past, but it's been a while.

    Do you have the "Green Arrow" icon on one of your toolbars? That usually will list your most recent downloads with a button to open the folder where they are saved.
    If you don't have that, you can open the full download list using either:
    * Ctrl+j
    * Tools > Downloads
    * History > Show All History, then click Downloads in the left column
    Can you find the download listed there and click the "Open Containing Folder" button?
    Are you downloading Flash or Acrobat/Reader?
    For Flash try: http://get.adobe.com/flashplayer/
    For Acrobat/Reader, you may not need an update.
    Firefox's plugin check site only recognizes the Adobe XI (11) series as current, but if you have checked for updates in your Adobe Reader X or Adobe Acrobat X product (Help > Check for Updates) then you do not need to update the plugin. For this older Reader/Acrobat version, please rely on Adobe for information on available updates and not the plugin check site.

  • Can no longer access blueyonder emails on iphone.I get the following error message: The mail server 'imap4.blueyonder.co.uk is not responding', how do I fix pls?

    Hi there
    As I've mentioned above, I can't seem to access my emails from my blueyonder account on my iphone. When I first set up my account on the phone, I had no problems at all receiving emails. Then recently, just out of the blue I get the following error message: 'Cannot Get Mail, The Mail Server 'imap4.blueyonder.co.uk' is not responding.  Verfiy that you have entered the correct account info in mail settings.  I definitely have the right settings, I even checked with Virgin but they are not able to assist with my problem. Has anyone else experienced this problem, if so,how did you fix it? If you could explain in simple terms as I'm not tech savvy!
    Many thanks!

    http://www.apple.com/uk/support/iphone/mail/
    work through this

  • I'mtrying to transfer my iTunesfrom an old computer (under XP) to a new computer (W/7).  I have successfully downloaded iTunes and some of my library, but when I try to play tghem it says I must authoruize my computer.  How do I do that?

    I'm trying to transfer iTunes from my old computer (under XP) to a new computer under (W/7).  I've downloaded iTunes successfully, but when I try to play something from my library it says I must authorize my computer.  How do I do that?

    Hello Ned,
    Congratulations on your new computer!  It sounds like you need to authorize it with your Apple ID.  Use these steps to authorize your new computer:
    To authorize a computer, follow these steps:
    Open iTunes.
    Choose Store > Authorize This Computer from the menu bar.
    You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
    Enter your Apple ID and click Authorize.
    You can find those steps and more information at the following link:
    iTunes Store: Authorize or deauthorize your Mac or PC
    http://support.apple.com/kb/ht1420
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My iPhone had charge but turned off and won't turn on even when it is in the charger

    My iphone 4 turned off still with charge, I have tried to charge and connect to I tunes and nothing is happening HELP

    Hello Samoens,
    I would be concerned too if my iPhone wasn't powering on.  I found some steps you can take to address issues like this:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • System preferences desktop and screensaver not responding, how do is fix that?

    everytime i open up system prefences and i gp to desktop and screensavers it freezes and idk what to do i already restarted my macbook and all, but its still having an issue i thought it had to be updated, so i updated it twice and its still freezes. can someone help me with this this issue.
    thanks

    Boot to Recovery_HD. (hold Command-R or Option at Startup)
    Answer only the "what Language" question, if asked, and do not Install.
    Launch Disk Utility.
    Select your Hard Drive by Hardware_name.
    Inspect the SMART Status for "Verified".
    (Repair Disk) This repairs the top level and Boot data.
    Select your data Volume ("Macintosh_HD" if you have not changed it).
    (Repair Disk) This repairs the Directory data structures in the Volume, and takes several minutes.
    Because of the specific problems you are having, do this additional step:
    (Repair Permissions)
    Many messages may scroll by, almost all of which can be ignored unless they appear in RED.
    Reboot normally and test.

  • When launching firefox I get error 404 not found how do I fix that I upgraded to 3.2.20 (1)

    I upgraded to 3.6.20 (1) yesterday and it was working find. When I open firefox it automatically says "Error 404 not found" and nothing else but blank underneath. Any solutions I checked the plug in and it wants to download Quicktime 7 and it keeps referring to a MAC and I have Windows XP

    Hi jahhaas,
    Take a look at the troubleshooting steps outlined for Windlows 7 in this article:
    http://support.apple.com/kb/HT1923
    Cheers,
    GB

  • I sign in under my account and when i go to update something it pops up as someone else's account how do i fix that.?

    I got to the ap store to update my aps and it comes up as someone elses username , but when i go to the itunes store its under my account how do i fix this?

    Go to settings/itunes and app store. Sign out then back in with your apple ID then password!

  • On my college simnet, It says "browser system requirements not met", How do I fix this so I can do my school work? the browser has been updatedt

    I'm not able to click on a selection for my school work, every time I go on the selection my cursor turns into a red circle with a line through it and it says browser system requirement not met and my firefox browser has been updated to the latest version. The firefox browser at school has no problem letting me select the bar.

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    '''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
    * Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    '''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    ;[[Image:SafeMode-Fx35]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • I was changing my iphone 4 font when it was downloading the apple came out and now i cant do nothing with it the apple has been there all night i have turned it off and on and it still not working how do i fix that

    i was changing the font on my iphone yesterday and the apple came out saying it was going to respring or restart springboard i dont really remember now it has not came on since yesterday i have turned it off and on a couple of times and it does not do nothing the apple comes up and it seems like its going to start up but it freezes what do i do to fix it i really need my phone i have a child and im by my self most of the time with my son

    Is your iPhone jailbroken? If so see: http://support.apple.com/kb/HT3743

Maybe you are looking for

  • Restoring Time Machine Backup on new SSD

    Using STOCK HDD 500GB 5400RPM, Have a Time Machine backup on an external Seagate USB 3.0 drive, about 140GB used on my disk, if I restore to a 240GB SSD will it work smoothly or will there be problems due to the lower capacity on the 240GB SSD?

  • PDF Document Counting Form Field

    I've searched and can't seem to find a solution to this - is there a way to include a document counter so that when a person opens or saves a pdf, it shows the number of that pdf. If I open it, it will show Doc #1 and the next person to open/save it,

  • Universal Dock Model Number

    I have just purchased an Apple Universal Dock (with remote), to be used to connect my Nano (and soon iPhone 3G) to a pair of Audioengine A5 active speakers. The dock I've purchased has a model number MB125G/A. Browsing the net, I've found the Univers

  • RFC Import from own SAP XI results in java.lang.NullPointerException

    Hi All, I'm trying to do an import of a local RFC (developed in SAP XI) but this results in a java.lang.NullPointerException RFC import from other SAP system is no problem. Anyone an idea? Cheers, Frank

  • Request for raw ATCHD footage from HF-10/100 owners.

    My HF-10 will be here in a few days, and I like to get a minute or so of raw AVCHD footage to experiment with before it arrives. Anyone know where I can download a small sample from?