Change the pages of a TAB control programmatically

How can I change the pages of a TAB control programmatically, but not by pushing the tabs in Front Panel when program runs?

100% correct, Thanks
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Similar Messages

  • How is it possible to change the page of 1 tab to Page 2 then to page 3 etc using a boolen control?

    Hi sir,
             I created A tab control of 4 pages.How is it possible to change the page of 1 tab to Page 2 then to page 3 etc using a boolen control?
    Please Mark the solution as accepted if your problem is solved and donate kudoes
    Solved!
    Go to Solution.

    You have a couple of possiblities:
    Keep the tab value in a shift register and use a value changed on the boolean to increment or decrement the tab. Write to a local variable of the tab as needed (I would recommend against value property nodes as in the above examples by others).
    You could also hide the tabs and make the tab control an indicator. Now you can write directly to the terminal if the boolean changes and you don't even need a local variable.
    Here is an example showing both (LabVIEW 8.2).
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    TabSwitcher.vi ‏18 KB

  • Can I individually change any of the attributes of an individual tab (not the page) on a Tab Control?

    I have a Tab Control with approx. 15 tabs. After the user changes anything (adding text, changing a ring control, etc. ) from the default configuration on any of the 15 tabs, I would like a change to that individual tab only (say color change, text change, anything) so when the user sees all 15 tabs, they know what tab page has had changes to the defaults.
    I appreciate your help with this one!
    (Note: I tried using a imported bitmap control of a red checkmark - and use true/false to an
    visible property node -this only works when placed in any of the Tab control pages, but not on the individual Tab itself.)
    -Karl H.

    Karl,
    I have attached a LabVIEW 6i example to this post that indicates with an LED if the control on the Tab has been changed from its default value. I used the classic LED's to make them invisible when the value is still the default. Hope this helps.
    Attachments:
    tabcontrol_default.vi ‏27 KB

  • I want to change the page a new tab opens to. I am only getting "Yeppo" no matter what I do. I will permanently movve to Chrome if this cannot be fixed.

    I am able to set my homepage, but not the new tab. I want to change the new tab to my homepage. Right now, it only opens to Yeppo. If this cannot be fixed, I will be forced to permanently move to Google Chrome.

    Firefox is highly customizable, you can make Firefox 4 look and behave more like Firefox 3.6, for details see http://redherring2.wordpress.com/2011/01/17/firefox-4-restoring-firefox-3-ui
    The search option is at the top of this page, or for advanced search use https://support.mozilla.com/en-US/search?a=2

  • How do you change the page that a tab opens to?

    my tabs are opening to a blocked website and I want my tab window to open on my home page.

    The only way a tab can be set to open something other than a blank page is a add-on. Try disabling all of your add-ons and then see if it is fixed.

  • I'm trying to change the content of a tab. Can't find info anywhere! My new tab used to come up as Google search page. Now it is Bing, and I don't want Bing

    I'm trying to change the content of a tab. Can't find info anywhere! My new tab used to come up as Google search page. Now it is Bing, and I don't want Bing. I have uninstalled the program that inadvertently put it there but Bing remains. Where is the tab control that hooks me up with Tab content?

    Removal of dupe comment

  • How can I set the tab order of text box controls on each page of a tab control?

    I need to be able to select the tabbing order of individual controls on a single page of a tabbed control. How??

    In LV 6.1 an up you should be ablel to right click on the edge of the tab control when the tab-page in question is selected.
    The bttom selcetion in the pop-up is "Reoder controls in page..."
    selecting this option will switch editing modes to allow you to specify the ored, just like in a cluster.
    I seem to remeber in older versions you had to drag the tabable controls off the tab control, specify the tabbing oder and then drag them back on. The oldest version I have on this machine is 6.1 so that all I can speak for at the moment.
    I hope this helps,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Boolean Controls on a Hidden Page in a Tab Control

    Hello everyone. 
    I am having some issues with a tab control in a fairly complex program put together by another (more experienced) developer. The basic setup for this tab control features several tabs to control various aspects of a system (motor setup, video setup, general parameters, etc.). Going to a specific tab and pressing Ctrl-F8 brings up a password prompt, which then displays the "Advanced" menu. The advanced menu is a hidden page within the same tab control. The advanced menu contains several Boolean controls that allow access to the various advanced setup features (these pages are also hidden pages on the same tab control), however, none of the Boolean controls are functioning. Clicking on the controls does not cause the buttons to appear pressed, either when running the program as a compiled executable, or while on the front panel of the VI in LabView. The hidden pages also appear as dark grey. I have confirmed that the same is true for all of the hidden pages within the tab control. I believe that my issue is with the version of LabView that I am using. The program was designed in 8.0, whereas I am currently using 8.2. I have not been able to find any references to such an issue between the versions, and I am somewhat at a loss as to how to correct it. Version 8.2 is the only version I currently have access to, otherwise I would use version 8.0, to see if that corrects the issue.  Programs that were compiled previously by the original designer do function properly (hidden pages, when displayed, still appear dark grey), but even compiling the unmodified source code results in the same problems for me. 
    Any help that you could offer would be greatly appreciated. P.S. I would be addressing these problems with the original designer, but he is currently on vacation for a month and I wish to get this resolved.  
    Solved!
    Go to Solution.

    jack47 wrote:
    If a page in a tab control is hidden it will appear 'dark grey', and all of the controls on that page will behave as if they are disabled.  If you 'right-click' on the page name, and select 'Advanded->Show page' it will turn light grey.  Now you should be able to change the controls when the VI is not running.  If the page is shown during operation and the controls still do not function they are probably disabled.  You can check by 'right-clicking' on the control and going to 'Advanced -> Enabled State'.  Also it is possible that they are disabled programatically using a property node.
    I am leaning towards this as the issue, at the moment. I just find it very odd that the controls work in the 8.0 compiled program, but not my 8.2 compiled version.
    I will have to show/hide each page when it is accessed/left.

  • When I click a link to open the page in new tab, it open the new page beside my page.

    After I update FireFox to version 3.6.8, I could not open the new page in the last tab, it always opens the new page in beside the tab.
    Mmm…I could not make sure the new page or new tab I said is the same with you…?? (I use Chinese version so that I don’t know if it’s the same or not…)
    A window could open several pages with different tabs, and I could click different tab to different page, right?
    If I right clicked a link to open the page to “new tab” in the same window, the new tab opened in the last tab of my window.
    But after I update FireFox to version 3.6.8 and I click a link to open the page to “new tab” in the same windoe, the new tab will open beside my page. (Mmm…Open on right of my page.)
    I would like the “new tab” open to the last tab in my window, not “beside” the tab I used. How could I change the setting??)
    == This happened ==
    Every time Firefox opened
    == After I update FireFox to 3.6.8

    That feature isn't new to 3.6.8, it was changed in 3.6.
    Type '''about:config''' in the URL bar and hit Enter.
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''browser.tabs.insertRelatedAfterCurrent'''
    Double-click that preference to change the value to '''''false'''''

  • Changing the page size in smart form

    hi to all experts,
    im printing barcode of size 1x3 how can i change the page format from A4 size to 1x3

    hI,
    it is possible to create a new page format using tcode SPAD
    go to full administration from the applitool bar. go to device types tab
    1) create a page format
    2) under device type : include the page format in SWIN.
    now go to devices/servers tab
    1)create a new output device here. and use it in program.
    Edited by: kat k on Feb 25, 2009 9:46 AM

  • How to change the font size from tabs ???

    Hi
    I found a tip to change the CSS in the apache directory in the forum here.
    but i can´t find the directory on my hard disk/oracle directory
    i got this version installed:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    can i change the font size of tabs/regions etc in any other way??

    Hi,
    The font size is defined by the style class used for the tab cells (tabs are normally created as cells in a table).
    To do this, the simplest solution may be to edit the page template:
    1 - Go to Shared Components/Templates
    2 - Select the page template(s) that you are using (you will have to do this for each template that you've used that uses tabs)
    3 - Scroll down to "Standard Tab Attributes" - you'll see two sections: Current Tab and Non Current Standard Tab.
    In Current Tab, you'll have something like:
    <a href="#TAB_LINK#" class="t12standardtabcurrent">#TAB_LABEL#</a>
    In Non Current Standard Tab, you'll have something like:
    <a href="#TAB_LINK#" class="t12standardtabnoncurrent">#TAB_LABEL#</a>
    After the class="...." attribute add in style="font-size:12px" (use whatever px value you want)
    4 - You should repeat the process for Current Parent Tab and Non Current Parent Tab as these contain the same settings
    5 - Apply your changes
    Regards
    Andy

  • How can I define the page of new tab instead of a blank page ?

    Hello,
    I would like to define define the page of new tab instead of a blank page but without having to install a new extension.
    (see here for your answer if it is what you are looking for https://support.mozilla.com/fr/questions/716280 )
    Is it possible?
    Like changing something in about:config ?
    thanks

    too bad...
    (If I am not wrong I should add "there is no MORE about:config setting")
    So is there a way anyway ?

  • How to change the value from one input control to another input control?

    Hi Experts,
    I want to change the value from  one input control to another input control. For Example if i change month in first tab. it should reflect in second tab also. How should we acheive through input control or some other option.
    Here I attached screen shot.Please help me for this

    Hi,
    It is not possible to have Input controll in all tabs that will be set from another .
    But There is one workaround .
    Follow the link below .
    http://davidlai101.com/blog/2013/08/13/web-intelligence-input-control-that-affects-all-tabs/

  • Change the Page Template

    I can change the Page Template, for example, "One Level Tabs" to "Popup" at runtime?

    (sorry to budge in!)
    The question still remains: why would you want to do this? Or maybe, why not either make the page tab-based OR pop-up? My worry would be that your user opens the popup page, then navigates back to wherever the 'tabbed' version is and attempts to load that - what would happen then?
    If there is a solid design reason to do this, you could probably achieve it by making two copies of the same page - one being the 'tab' version and one the 'popup' (although further changes to the page would require double the work).

  • How do you can change the page size of a pdf in MAC?  I have multiple pdf documents of different sizes that I want to combine.

    Help.  How do I change the page size of a pdf in MAC?  I have multiple pdf documents in varying sizes I would like to combine and print.

    There's no real need to do that. A PDF can have pages of different sizes.
    On Fri, Jun 6, 2014 at 4:11 AM, christine rambo <[email protected]>

Maybe you are looking for