Change the "Wait while i transfer your call" greeting
Hello,
Does anyone know how I can change this Unity greeting or replace it with a custom one? I know how to turn it off but I have a customer that would rather have it say "Please wait while I transfer your call". Thanks!
You cannot change it, but you can disable it.
Similar Messages
-
Disable "Please wait While I Transfer your call" from cuc 9.0
Dear All,
I've installed the Cisco UC Solution with CUCM 9.0 and CUC9.0. I'm using CUC for auto attendant and i want someone who can help me how to remove the sound "Please wait While I Transfer your call" from CUC which comes at the time of call routing.
best regards
KennedyHi Kennedy
Please go to system call handler - edit your Call handler which responsible for AA - transfer rules- On this page you will find transfer actions uncheck play "wait while i transfer your call prompt".
Thank you
Please rate all useful information -
I am constantly downloading pdf's and excel files from our company software which uses a web browser to access it. When I download a file, firefox generates a full screen pop up window that states "please wait while we generate your document." My problem with it is the fact that pop up window does not close after the download. I have to manually close the window. Is there a way to set that pop up window to close automatically after the file has finished downloading and is open in foxit reader or excel or word or whatever?
Thanks,
TonyHi,
You could try is to '''Disable''' the Foxit, Adobe and Office '''Plugins''' in '''Tools '''('''Alt '''+ '''T''') > '''Add-ons''' and use the normal Firefox Open with (when you click on a link) to browse/open it in the required application.
[https://support.mozilla.org/en-US/kb/Using%20plugins%20with%20Firefox Using plugins] -
Hi All,
We have recently installed Service Pack 4 In SharePoint 2003 I,e SPS 2.0 , we ran the stsadm upgrade command from the Command Prompt , since 5 days the upgrading the sites windows showing and does it completes or not or is there some thing wrong ?.
Environment:
SharePoint 2003 Service Pack 3
SharePoint 2003 Message :
Please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.
We have applied in development box it was completed in 8 hours , but when we do the same in production it was never coming back since 5 days. Not sure what happening
Thanks in Advance
Ravishankar Maduri MCTS,MCPD,MCPhow large are your site collections and content databases?
sounds to me like you're WELL past the recommendations, which could certainly cause such an impact.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs -
WM-production order-need change the open quantity in Transfer order
Hi,
I created the production order (order quantity 1000). i did material staging and generated TR. .
But i need to change the open quantity in transfer order . i need to create the partial Transfer order
against TR..
KINDLY SUGGEST ME
WITH REGARDS
DineshHi Dinesh,
TO for partial qty is possible.
When you are doing material staging with 319 mov.type, you create a transfer order for partial quantity as follows:
You first create a manual transfer order using transaction LT04.
You specify the TR number in the intial screen and navigate to the detail screen, system shows the Open TR quantity and the proposed TO quantity. By default, both these quantities are equal to the TR quantity.
However, when you create by clicing the "Create TO button" (the icon with a plus sign in the tool bar of LT04 screen), system takes you to another screen where it asks for the "Requested Qty" on the top of the screen. Here you can modify the qty as per your requirement; then you can check and confirm the storage type and storage bin for source and destination stocks & save.
It is important that you give the correct source storage type & storage bin that is having stock or otherwise system might give error message.
System will create a TO line item with the entered qty and propose the balance TR qty as the 2nd TO line item. You can skip this 2nd TO item or delete it from the TO.
Once again, if you click the Save button, system will save the TO with the partial quantity.
The balance quantity will be available in the TR as open quantity and this can be seen in the header data of transaction LB03.
Regards
Prabhu -
How can i change the font while im coding?
How can i change the font while im coding? I am not talking about the final product and inserting fonts in my documet i am talking about when i am in the progress of coding I want to change the font so it is way more pleaseing to the eye when I am staring at it while coding? please do help and thanks!
Editing the source is a bit of a pain because you'll have to redo it after every update. It's better to write yourself a mini-extension that adds a new stylesheet -- that is also very simple to do. Just follow these instructions: https://github.com/adobe/brackets/wiki/Customize-Your-Code-Font.
- Peter -
Can't browse the internet while making a phone call
I AM WONDERING IF ANYONE ELSE HAS THIS. I live in the United States and used to have a really cheap phone with this particular carrier and was able to make calls and browse through the internet while on that phone call. Now that i have the new I Phone 6 with that same carrier and i can NO LONGER make a call and browse the internet. This really upsets me since i pay a high bill to have my IPhone plan. I thought it was a problem with my carrier company but the told me that it's an issue with the new IPhone 6.
It's on, but are you actually in an LTE coverage area? What does it say in the status bar? If you're on the CDMA network, you can not talk and use data at the same time. The "cheap" phone you had that allowed you to do that actually had 2 radios in it, as opposed to the iPhone. Of course, even if you are on LTE, the carrier needs to have enabled Voice over LTE service in that area and on your account.
Sprint is pretty consistently the worst carrier in the country. -
Is it possible to change the wait indicator
Hi,
Is it possible to change the wait indicator in a web dynpro abap application ? if yes , how ?
user clicks on a button or link etc on a page and before navigation to other view takes place or before necessary modifications on the current view takes place, a wait indicator appears on the screen. It is possible to change that ?
Regards
seventyrosHi.,
I think it is possible., because when I run Web Dynpro application in IDES system one wait indicator came and when I run in Dev another wait indicator came., So I think it depends on server settings. U can use any of sap standard themes. check with your basis team.!! Also as suggested, look for themes.
hope this helps u.,
Thanks & Regards
Kiran. -
Change the permission while placing the file
Hi Experts,
I have a production issue :
I am placing the .txt file into a SFTP server location from a SFTP Location[NO Transformation in the file]. (Sender and receiver channels are SFTP)
I am using user- user1(for example) which have the read write access to the particular folder, hence when it places the file it places with 664 permission .(This permission gives only user1 as read/write access , but other user have read only access).
The requirement :
The user2 want to deletes the file from the particular folder location , they want to know by any means can PI change the permission while placing the file into that location so that user2 can also have read/write access.
Can you provide the opinion whether it can be done using SFTP receiver channel or any other option to change the permission of the file.As far as i know the permissions are related to the folder and the User not for files
While creating the access, a particular user authorizations related particular folder, not related to files.
So this should be done some thing like by giving the read/write access to user2 as well
Regards -
How do you change the number of rings before a call goes to voicemail?
How do you change the number of rings before a call goes to voicemail.
You can't; it's set by Verizon at 30 seconds.
-
Hi All,
This is my first post to ms exchange forum am getting Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
with exchange (rest IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
Exchange 2013 CU6 with server 2012 Std 64Bit
Thanks,
MuraliDear All,
I have found the solution for above problem, the problem has occur due to PopProxy inactivity
please find relevant exchange management shell commends below.
1. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Inactive
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Active
2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
-State Active
3. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Active
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Activ
Replace yourmailserver.com with your server host name.
Thanks -
How do you change the email address associated with your apple id
how do you change the email address used for your apple Id I have tried going on managing apple Id and it isn't working
Just where are you going?
and what do you see? A screen shot with personal info redacted would be great.
I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information. -
Change in logic for selecting the Bin while creating Transfer Order
Hi ,
Currently the system follows SAP process of BIN selection which is as mentioned-
With stock removal strategy Partial Pallet Quantity (A), system follows below steps to find the storage bin:
1.SAP always compares the requested amount from the Transfer Order with the largest bin amount available in the stock.
2.If the requested quantity of the transfer order is the same as or larger, the system removes the material from the largest bin amount first.
3.If the requested quantity is smaller, the system removes the material from a storage unit for partial quantities in ascending order.
Now the customer has requested a change which is -
It wants to take in BIN in the FIFO order followed by partial pallet .
Question is - Is this possible ?
Cheers
DishaHello,
May I add something to the discussion.
If you are calling "OMLJ", you see on the left side the secion "Transfer requirements". If the box for "Manual TO creation not allowed" is ticked, you are not able to create the TO's by the manual transactions. Then only the system is allowed to create the TO's, for instance with the report RLAUTA10.
I hope this anweres your question.
Best regards
Uwe Neuman -
I reaaally hate how anti-procrastination apps like ColdTurkey don't work for apple products, because what's the point of restricting internet usage on the computer when you can just access it from your apple device? There's no point in using the parental controls or setting passwords for obvious reasons, either.
So I had an idea: from what I know, after guessing the password incorrectly 6 times, the device is locked for 1 min, 7 times, 5 min etc. So I was thinking, is it possible to change the settings, for example, to lock the phone for 60min after 3 wrong password attempts? This would be incredibly helpful!!
(if you know a way but don't want to post it here, please email me instead!)Thanks a lot Rob. That works.
"Rob Woollen" <[email protected]> wrote in message
news:3f29b665$[email protected]..
java -Djava.io.tmpdir=<tmpdir path> weblogic.appc
-- Rob
Bernhard Lenz wrote:
I realized that weblogic.appc creates a working directory
/var/tmp/appcgen
when compiling ejbs. What happens if 2 developers run weblogic.appc atthe
same time? Will they be using the same temp directory and therefore getin
each others way? I'd rather like to create a temp directory which isunique
for the machine. Our build scripts would be able to create such adirectory
but I couldn't find anything in appc to set the temp directory.
Do you have any advice?
Thanks for your help.
Greetings
Bernie -
How do you change the account reset information for your account?
I was using live account as the apple ID for quite some time and recently after it was migrate to the new outlok my email ID changed as well.
Correspondingly I renamed the apple ID to reflect outlook.com.
I was trying to change the account reset information (email to which the reset link will be sent to, it still points to my live.com alias), however I have forgotten the answers to the information which could have helped me to change this.
Is there any other alternate way of changing the account reset information?
Regrds,
KaushalHI Geoffrey,
I would request you to call or chat to our helpdesk
Contact no for our helpdesk : 1800-833-6687
For Chat please click http://helpx.adobe.com/contact.html (Follow the Steps)
Let me know if you still not able to change your details
Regards,
~Pranav
Maybe you are looking for
-
After upgrading to Mountain Lion my 2009 (early 2010) iMac mutes audio when awaking or when it goes to sleep. Anybody else having the problem? My other iMacs are not having that problem. I'm not sure if I am missing an option somewhere or what is goi
-
Can't get iTunes on new computer to show iCloud music files or manually manage phone
I have so many questions. Normally I use iTunes on my work PC, but I got a new home PC, downloaded iTunes, logged in with Apple ID, yet I don't see any of the music showing up from my Cloud. And when I plug my phone in, I'm unable to add/delete some
-
Could not find the specified responsibility
Hi All, I have created project for Employee Self-Service. Got all the relevant file by seeing through the "About this Page" link. Firstly I am not able to find the envVO file. Can anybody tell me where it is ? Secondly Compiled the project and run th
-
Usb port not recognizing external drive
When I plug my external backup drive, Lacie, into either USB ports on my MacBook Pro, it is not recognizing the drive. Not sure if I powered down incorrectly. It use to recognize it. Help.
-
Hi all, I have developed a report whose output is directed to email. The problem is the output is sent as an attachment to emil. I want the report output to be sent in body of email rather than as an attachment. Thanx in advance Murthy