Change the permission while placing the file

Hi Experts,
I have a production issue :
I am placing the .txt file into a SFTP server location from a SFTP Location[NO Transformation in the file]. (Sender and receiver channels are SFTP)
I am using user- user1(for example) which have the read write access to the particular folder, hence when it places the file it places with 664 permission .(This permission gives only user1 as read/write access , but other user have read only access).
The requirement :
The user2 want to deletes the file from the particular folder location , they want to know by any means can PI change the permission while placing the file into that location so that user2 can also have read/write access.
Can you provide the opinion whether it can be done using SFTP receiver channel or any other option to change the permission of the file.

As far as i know the permissions are related to the folder and the User not for files
While creating the access, a particular user authorizations related particular folder, not related to files.
So this should be done some thing like by giving the read/write access to user2 as well
Regards

Similar Messages

  • How to use FilePermission class to change the file permission in Linux

    Hi all,
    I'm running in a issue related to changing the file permission under Linux environment. I'm using Suse 10.0 Linux and run jdk 1.5 java runtime.
    I want to create a file during execution time and change the permission of the same. I use File.createNewFile() API to create file. By default it does not have all the 3 permission (read,write,execute) for all the user ( user,owner,group). Through program I have to change the file permission ( equal to execute ,chmod 777 filename).I donot want to use runtime.exec() with chmod as the argument , since it creates a process to change the permission which may impact the performance. I want to try FilePermission class , by giving filename and permission as the argument. But it is not changing the permission . Could any one faced this problem ?
    If any body guides me, how to change the permission of the file under Linux using FilePermission class , it would be helpful.
    Thanks,
    Sankar

    How do I set the Umask prior to starting the program
    ? Could pls explain in steps.I don't think umask can help you. The mode mask prevents permission bits from being set when a file is created, but does not force any bits to be set. So if execute permission is not set explicitly when a file is created, umask will do nothing about it.
    But if you want more information about umask, see the man page for your shell script (sh, csh, etc.) or "man 2 umask".

  • Change the file permission of listener log (log.xml) 11gR2

    Hi
    Is there a way to change the file permission of the listerner log (log.xml)? everytime the a new log.xml is created the file permission is 640.. i want it to be 644. Is there ay configurations that needs to be done?
    DB version is 11gR2.
    Thanks

    peacock wrote:
    Hi
    Is there a way to change the file permission of the listerner log (log.xml)? everytime the a new log.xml is created the file permission is 640.. i want it to be 644. Is there ay configurations that needs to be done?
    DB version is 11gR2.
    Thanks
           umask [-p] [-S] [mode]
                  The  user  file-creation mask is set to mode.  If mode begins with a digit, it is interpreted as an octal
                  number; otherwise it is interpreted as a symbolic mode mask similar to that  accepted  by  chmod(1).   If
                  mode  is  omitted, the current value of the mask is printed.  The -S option causes the mask to be printed
                  in symbolic form; the default output is an octal number.  If the -p option is supplied, and mode is omit-
                  ted,  the  output  is in a form that may be reused as input.  The return status is 0 if the mode was suc-
                  cessfully changed or if no mode argument was supplied, and false otherwise.

  • How to change the file name of pdf file in html page?

    Hi,
    Actually my requirement is to upload 50 PDF files containing javascript in each file into flex page with the help of one html page.
    i did the the javascript part by using batch processing.
    now i want to call those pdf files one after another without changing the file name in html page
    the code written in html page is
    <html>
        <body>
            <object id="PDFObj"
                    data="http:\\localhost\pdf\20090807 - Batch 630.pdf"
                    type="application/pdf"
                    width="100%"
                    height="100%">
            </object>
            </body>
    </html>
    So every time i have to change that file name to acess another file.
    Is there is any other way to sort this problem????
    Plz anyone help me to sort out this problem with some code or some example.

    I once had a similar task for creating a webpage that I only use on my computer--a webpage that accesses PDF's and SWF's font previews from a list of fonts as "a href's".  What you must do is utilize the power of the command line, whether on a Mac on a PC or on Linux, Linux being the most powerful (although Mac IS Unix).  You must utilize variables, variable replacement, and then a command to print out the results of a "for" or "while" loop to a text file which will be your HTML file with each individual link automatically built into the HTML code.  You will have a list of 50 links.  If you are simply looking for a GOOGLE type functionality where you click on "Next" and "Previous" you will have to dig deeper into variable replacement--this I don't know how to do yet but there are books for command-line shell interpreters.  One shell interpreter is called "bash" (born-again shell) and there is a book on the market which gives a detailed example of how to replace variables in a shell script.  Again, I don't know how it works.  I will try to learn this at a later time when I am more seasoned with the basics of shell scripting.

  • Finder changes the file name in Save/Save As dialogue box

    Whenever I save or save as a file, the dialogue box opens, but when I make the file list active when using a mouse, the file name I click to changes the file name I am saving. I simply want to activate the file list window so I can find the right folder. For example if I am looking for a folder called "Receipts" I want to be able to click on the file list window to activate it and then type the first 2 letters of the folder-- "re" and then save the file in that folder. The finder keeps changing the name of the current file whenever I click on one of the "greyed-out" file names? This doesn't make sense unless of course I want to replace that file.
    Is there a shortcut that makes the file list window in the dialogue box active while in the SAVE/SAVE AS dialogue box??

    Yes, this example of horrible UI design has been a problem since "Panther". It illustrates what happens when you try to copy UI behaviour from another OS, do it poorly, and end up with a mess. In 10.3 and 10.4, the combination of the renaming behaviour with the default "replace" selection in the resulting save can result in data loss.
    Compared to the old Mac OS where a tab would flip the focus between the text field for the file name and the file browser, the current behaviour either doesn't allow enough keyboard access to controls, or with "full access" enabled, too many to cycle through easily. The inability to switch focus to the file browser using the mouse (depending on the view) is a horrible productivity loss. Having to recheck the filename before saving is a horrible productivity loss. Since there is no "undo" for the renaming in most files, having to retype the name is again, a horrible productivity loss.
    If they had done it right (a simple change, like requiring a modifier to rename), users would probably welcome the "rename" feature as a useful addition. Instead, it has the feel of something a junior Windows-trained programmer slipped in past their supervisor.
    In short, I am not aware of any workaround or hack to avoid this "renaming" behaviour. I doubt it will do any good since people have been doing so since "Panther", but you could try submitting feedback:
    http://www.apple.com/feedback/macosx.html

  • Changing the file location of iPhoto library...????

    I have a 13' Macbook since early 2008 with an 80gb hard disk.
    I also have a 500gb Time Capsule..
    Due to the size of my hard disk and my music collection amassing already 80gb+ I changed the file location of the iTunes music library to the Time Capsule.. this wasn't too difficult to work out how to do, but, i now have over 50gb of photos and videos in iPhoto and do not want to delete any. This has resulted in my hard disk/start up disk being full to capacity.
    I now of course need to change the location of my iPhoto library from being on the MacintoshHD to being on my Time Capsule, but unlike with iTunes i can find no way of doing this... can anybody help??
    thanks in advance

    Welcome to the Apple Discussions.
    1. Quit iPhoto
    2. Copy the iPhoto Library Folder from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    but
    1. Have you a wired or wireless connection to the Time Capsule? A strong warning: If you're trying to edit the Library (that is, make albums, move photos around, keyword, make books or slideshows etc.) or edit individual photos in it via Wireless be very careful. Dropouts are a common fact of wireless networking, and should one occur while the app is writing to the database then your Library will be damaged. Simply, I would not do this with my Libraries.
    2. Are you also using the TC for back ups? because the device is not intended for both back ups and general storage uses.
    Regards
    TD

  • I have been using pse11 on wondows vista and it has certainly started freezing on starting and I am unable to access the organizer, the editor is ok. Have removed and reinstalled but is the same have changed the files as suggested. Have been unable to ope

    I am using pse 11 0n windows vista for years and it has suddenly started freezing on starting, I am now unable to access the organizer it freezes on the blue screen, the editor can be opened. Have removed and reinstalled but is still occurring. Have changed the files as suggested, am unable to open as administrator

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I uploaded and edited my RAW image, clicked 'Save As', and changed the file type from .psed to .jpg.

    I edited my raw image in Photoshop CS6, selected 'Save As', and changed the file type from .psed to .jpg. I also selected 12 and large file when the window popped up, concluding my 'saving as'. My computer does not recognize the file type and won't open them. Can someone help me? Thanks!

    When naming files, stick to the letters of the ENGLISH alphabet, numbers and underscores.  Do not use illegal characters like apostrophes, commas, asterisks, ampersands, hatch or pound signs, diacritics or accented characters, slashes, etc.
    While the period (dot) is not an illegal character per se, your file names should have only one period and that should always be followed by the file type extension.
    EDITED typo: se
    Message was edited by: station_two

  • Change the file set icons system wide

    Hello,
    I am trying to change all my .html, .js, .css file sets, system wide. Right now they are all the plain boring white with text. If I go into a folder they quickly appear with their more colorful Dreamweaver, photoshop, etc icon, but quickly jump back to the plain white, boring icon. I know how to change the files icons one by one, but obviously that could take a while.
    Looking for an easy way to change my files system wide wothout screwing anything up. Recently came from a PC and loving my mac (never going back).
    Thanks in advance!

    Hi
    Still no :o)
    The only way around it, is to wrap your conc process that generates the etext output either with another program or if its an Oracle Report based program, in the after report trigger. That will get a handle on the generated file, easy enough cos you'll know the requestid, and then copy and rename it to the same or another location. We used to do this for a payments process in the Netherlands localization we ship.
    Tim

  • When saving image i want that firefox auto change the file name if same name exists like google chrome etc. if there is any option pl let me know.

    when saving image i want that firefox auto change the file name if same name exists, like google chrome does this. if there is any option pl let me know.

    this saves images, i just want to save single image, and wants while saving image, it auto changes the name if find similar name of file in the folder. chromium and maxthod does this

  • I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0.  Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

    I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
    Bob

    Bob
    What do you have now.....
    What computer operating system do you have?
    We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
    What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
    If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
    If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
    VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
    VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
    Does the above scenario apply to you?
    The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
    the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
    I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
    Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
    1. Place the DVD disc in the burner tray
    2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
    3. Go to
    Get Media
    "DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
    "Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
    Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
    You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
    With this VOB selected, click on Get Media to get the file from there into the project.
    Should work fine.
    Complications may be involved if the people who processed your footage gave you something other what is described above.
    Please review and consider, and then we can plan our project strategy accordingly.
    Thank you.
    ATR

  • My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

    My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I tried to change the file type of the movie, but now I am unable to open/edit it in iMovie, HELP !

    I tried to change the file type of the movie, but now I am unable to open/edit it in iMovie, HELP !

    Thank you very much! This is exactly what I was looking for.
    I appreciate your time and effort in solving my question : )

  • I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

    can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

    Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
    Why can't you change the filename? Is it because the source drive is having problems?  If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
    If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
    Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

  • How do i change the file preview image for mp4 files?  I replaced the image but it doesnt show in my dock, instead it shows the first still of a movie

    http://imageshack.us/photo/my-images/21/screenshot07m.jpg/
    http://imageshack.us/photo/my-images/39/screenshot04s.jpg/
    pls help. i change the file preview of a movie file, and it shows that i have changed the preview in finder but when i open the folder on my dock, it shows the still of the movie instead.
    the image shows the film the hangover as an example. the movie poster is visible in finder, but reverts to a default movie still from the dock. this only seems to occur for mp4 files.

    its nothing to do with itunes, its movies form the internet. i got the file preview by taking an image off the internet, pressing command c and pasting it on top of the small icon in the get info section

Maybe you are looking for