Change to RSViewerPage.aspx doesn't reflect the change to the Sharepoint

I am trying to update RSViewer.aspx file under …15/TEMPLATE/LAYOUTS/ReportServer. It seems like the changes I made isn’t reflected on the sharepoint. Please let me know if you can give any suggestion to make this work.
Note: I have made same changes on Test sharepoint and everything is fine, just Live version doesn’t accept the changes.
Many Thanks.

Hi,
The RSViewerPage.aspx is a Out the boxed application page in the _Layouts folder, Modifying the files that are installed by SharePoint is not supported. Because when microsoft decides to change this page in a future release all your changes are gone.
What you can do is create your own application page.
Create a copy of the Layouts folder.
Custom the RSViewerPage.aspx and add your own branding.
For the Site Collections, Point the IIS Virtual Directory to the newly copied layouts folder.
For detailed information, refer to the following KB:
https://support.microsoft.com/en-us/kb/944105?wa=wsignin1.0
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

In System Preferences- Sharing- Remote Management the address doesn't reflect the computer name.

Hi,
I have a dual boot system with two seperate hard drives, Lion and Snow Leopard. One drive has a name of mac-pro2 for Lion and mac-pro2sl for Snow Leopard. Something happened when I rebooted from Snow Leopard to Lion that in System Preferences->Sharing->Remote Management that the computer name had changed to the Snow Leopard computer name it has a address and name of mac-pro2sl. I have change the Computer Name: and it worked and was changed to mac-pro2 but Remote Management still has the address of mac-pro2sl and doesn't reflect the computer name. I can ssh into Lion with mac-pro2sl but I have a conflict with from other computers when I log in with a warning of "Remote Host Identification has Changed". How do you change the computer name for remote management and ssh?
I have changed the hostname and it reflects the change when you login, mac-pro2 for Lion. But when you ssh into Lion it requires mac-pro2sl not mac-pro2.
When I change the computer name it shows below that the name in "Remote Management: On" "computer using the address mac-pro2sl" is selected but then doesn't change but remains the same when the dialog closes. How do you change the address to reflect the computer name? Is there a command line utility?
Thanks for any help.

If this problem is due to DNS, look in your configuration. What is the number one DNS server address? Is it local, or is it on the Internet at large? Or post the Address here and folks can help you look it up.
192.168.yyy.zzz
10.xxx.yyy.zzz
172.xxx.yyy.zzz
are all strictly local.

Why Java Platarform Micro Edition 3.0 doesn't reflect the reality ?

Hi guys,
It's my first ME project and I would like to know why into version 3.0 of ME, don't have the necessity of create your access (read and write into files) methods using Threads, and in 2.5.2 I must have to use Threads ? Because my project runs smooth into 3.0 but not into my mobile (E63) and 2.5.2 emulator, after reading plenty docs, and change the emulator to 2.5.2 I did discover that have the need of using Threads. What is the right one and why the 3.0 doesn't reflect the reality ?
There are any way that my project made with 3.0 runs smooth, how ?
Thank you in advance.

Hi once again,
One example of what I'm doing, using the javax.microedition.io.file.FileConnection to save and read my files, though it only works into my 3.0 emulator.
I'm using this method to open and read the file.
private String loadCipher(String typedKey, String pathLoad, String fileName) throws DigestException {
        StringBuffer notFormattedText = new StringBuffer();
        pathLoad = pathLoad + fileName;
        FileConnection fc = null;
        InputStream is = null;
        try {
            fc = (FileConnection) Connector.open(pathLoad);
            is = fc.openInputStream();
            int ch = 0;
            for (int i = 0; i < fc.fileSize(); i++) {
                if ((ch = is.read()) != -1) {
                    notFormattedText.append((char) ch);
            is.close();
            fc.close();
        } catch (IOException ioe) {
            System.out.print("Error reading!"); // Here I'll have to deal with exceptions
            System.out.print("IOException : " + ioe.getMessage());
        } catch (SecurityException se) {
            System.out.print("Error security!"); // Here I'll have to deal with exceptions
            System.out.print("Securuty exception : " + se.getMessage());
        pathLoad = FILE_ROOT;
        String myFileText = notFormattedText.toString();
        byte[] keyFromFile = readKey(typedKey, myFileText.getBytes()); // Here is where the program goes and decript my file
        return new String(keyFromFile); // Here I return the decripted text to be compared with password or for that the user might read it.
    }I don't intend to use Thread to run it, although I'm afraid of that it's the only way and with this all program structure will have to be re-designed.
Anyone knows if Thread is needed just to use the javax.crypto.... and javax.security..... ? Because I'm lost.
Thank you in advanced

He Genres on the iPod doesn't reflect the same as that of my iTunes.

he Genres on the iPod doesn't reflect the same as that of my iTunes. It shows unknown as a genre. Issue started when upgraded to the recent os. Tried clearing the tag info and putting them back in but no cigars... fix?

It sounds as though the hold switch on the top of the iPod has been moved to the "hold" position (which will display the small lock icon). Sliding it to the left should unlock your iPod.
The hold switch is meant to disable all functions so accidentally pressing one of the controls will not do anything (prevents accidentally turning on the iPod, for instance).

When I open an item/link in a new tab, the new tab doesn't reflect the appropriate url

When I open a new tab, the url reflects the old tab.
For example, I downloaded the addon that allows you to determine what the new tab will display. I picked google. Well, google, opens alright, but the new URL reflects Yahoo.com, which is where I WAS. This seems pretty wonky to me. How do I fix it.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

List distribution doesn't reflect the treatment split, Siebel Marketing 8.1

hi,
I have a segment tree with 2 branches. The first branch is assigned to treatment A, the other one to treatment B. If I load the campaign then 2 lists are generated and the number of clients reflect the treatment splits. However if I launch the campaign then the produced 2 vendor lists contain all clients of the segment tree. I expected that the vendor lists will also contain only as many clients as many I assigned to each treatment. Am I wrong or I'm missing something in the configuration?
thanks
Gyorgy

I didn't remember if I already tried it, anyway, I tried now:
asa-oi(config)# sh run nat
nat (inside,outside) source static any any destination static PoolAnyConnect PoolAnyConnect route-lookup
nat (outside,inside) source static PoolAnyConnect PoolAnyConnect route-lookup
but no difference, had the same problem...
Btw, when I try to connect via SSH, these logs messages appears: (don't know if it can help)
Syslog ID: 302013
Source IP Add: 10.6.4.1
Source Port: 2181
Dest IP Add: 10.4.11.2
Dest Port: 22
Description: Built inbound TCP connection 202412 for outside:10.6.4.1/2181 (10.6.4.1/2181)(LOCAL\VpnAnyConnect) to identity:10.4.11.2/22 (10.4.11.2/22) (VpnAnyConnect)
Syslog ID: 302014
Source IP Add: 10.6.4.1
Source Port: 2181
Dest IP Add: 10.4.11.2
Dest Port: 22
Description: Teardown TCP connection 202412 for outside:10.6.4.1/2181(LOCAL\VpnAnyConnect) to identity:10.4.11.2/22 duration 0:00:30 bytes 0 SYN Timeout (VpnAnyConnect)

Purchased GCU, but account doesn't reflect the purchase

On December 22, 2013, my wife purchased Battlefield 4 (xbox one) and a 2-year subscription to GCU. She used the coupon that we had previously received to get GCU for $30. Her receipt reflected that she had purchased GCU, but said that it was $0.00 because of some bundle offer.
After she left the store, she called Best Buy customer service to confirm that she had, in fact, successfully purchased a 2-year subscription. After approximately 5 transfers, this was confirmed.
All was fine until I noticed that our account indicated that our GCU would expire on February 10, 2014 (NOT 2 years from December 22nd). She again called Best Buy customer service to address the issue and after 6 transfers and being hung up on, "Rudy" confirmed that we had a 2-year subscription from February 10, 2014 through 2016. "Rudy" said that we would be receiving an email shortly. We are still waiting on this email (it has been 5 days).
Is there anyone here that can give me an explanation of what happened? All I want is what our receipt and Best Buy customer service has stated that we should already have, the 2-year subscription. If we messed something up or didn't understand something on our end, that's fine, but I would at least like to be given the opportunity to actually use the $30 coupon.
Any and all help is appreciated.
-Matt

Hello FliPSide186,
While I’m happy to see you were able to get things taken care of with your Gamers Club Unlocked renewal, I apologize for the amount of effort it took.
Thanks for letting us know that your issue was resolved. If you have any other questions or concerns, please feel free to share them with us!
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message

I paid for an in-app purchase of $10 which doesn't reflect in the app but has gone off my balance.

I paid for in app credits of $1000000 for $10 in the App Store. My balance has depleted accordingly but the app doesn't reflect the credit. There also isn't a way to check in the app. It is Tiger Woods 2012 from ea sports.

I'm not sure I can make sense of this but without asking too many questions, you can resolve your question by contacting iTunes direct.
Apple - Support - iTunes - Contact Us
But they will be wondering about the reference to hacking and you feeling bad about getting something for free.
Best step in my view is to make sure you don't get similarly involved in future. You must know roughly what you were doing. Then writie it off to a not to be repeated experience.

Color Picker Doesn't Reflect selected Color

>>In Fireworks CS4, the color picker doesn't reflect the color selected on canvas. <<
How can there be a value in Fireworks. When will this be fixed, cause lets face it, the world is about color?
Bob

Does your image have an adjustment layer or a layer mask
on the layer that is active when using the color picker?
If you have an adjustment layer, make another layer active
and see what happens.
If the layer that is active has a layer mask, click on image
thumbnail to the left of the layer mask and try the color
picker.
MTSTUNER

[svn] 2934: Update resources/config/messaging-config. xml to reflect the recent changes to throttling code.

Revision: 2934
Author: [email protected]
Date: 2008-08-20 14:47:00 -0700 (Wed, 20 Aug 2008)
Log Message:
Update resources/config/messaging-config.xml to reflect the recent changes to throttling code.
Modified Paths:
blazeds/trunk/resources/config/messaging-config.xml

O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons).

I have a Nano, where I changed computers and moved my library. Now my nano doesn't recognize the location or the song on the nano. How do I update my library so the nano will recognize.

I have an IPOD Nano. I had it originally set up on another computer where I would down load my songs that I purchased from ITunes. My Nano would sync up with my PC when I would plug it in. I had to change computers, so I moved all my songs / library to my new PC. I downloaded the ITunes process to my new PC and then purchased a song. I saw the song in my download area of my PC under ITunes Media / downloads. However, my nano would not sync as it is still referencing the prior location, which was on my old PC. I moved the song directly to the Nano when it was plugged in. I see the song on the Nano directory when I have it plugged in to the PC via the USB cable. I even click on the song and I hear it play from the Nano on the PC. However, when I go to look for the song directly from my song listing from the Nano music screen, it doesn't list he song or the artist as being on the Nano.
I have tried to follow the online instructions for erase and sync the old library to the new, but that doesn't happen. Any suggestions on what I may be doing wrong in moving from one PC to another. Seems to me this should be a much simplier process. But I find working with Apple products they are all harder to deal with. I would appreciate your help.
Mel

I am not doing it in ITunes, but i did down load the song from ITunes. I loaded the song on to my Nano, but in my menu selections it doesn't show the song or the artist in any search format. However, when i plug in my nano to my PC I see the Nano library on my PC drive listings and that song and artist are there. I can click on the song and it will play in Windows media on my work PC. I did notice that the format for most all the songs in my library on my Nano are MPEG - 4 audio Files.
Thanks for your help, Mel

I downloaded 2 cds onto my ipod nano through itunes. Recently my itunes account changed and now it doesn't recognize the songs from the cds. How to transfer from ipod back to itunes? I don't have the cds anymore.

I downloaded 2 cds onto my ipod nano through itunes. Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds. The songs are still on my ipod. I am affraid to sync now because the songs may be deleated, and I don't have the cds anymore. How can I transfer the songs from the cds on my ipod back to itunes so that I don't lose them?

What you have on your computer is your iTunes library, not your "account." The "account" you have for iTunes is your Apple ID, which you use when purchasing or downloading from the iTunes Store. If these songs came from music CDs that you imported into iTunes, those songs are not related to your Apple ID.
Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds
How are they not "recognized"? Are the songs still listed in your iTunes music library, but grayed out? They no longer appear in your iTunes library at all?
If you search your computer (not in iTunes) for the song files, using one of the song names, can you find the song files?

Hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

nishaadp wrote:
... it stucks with the apple logo , nothing works. Is anything i can do?
See Here for
Frozen or unresponsive iPhone

Tree table is not reflecting the updated model data changes at the front end

I have two tables ,
1) Provider table(tree table) 2)member table
I have implemented drag and drop functionality using jQuery UI on both tables.
In my scenario when I drag a member from the member table and drop it on the Provider table and also when I delete an assigned member from the provider table I will update the data fetched from odata model and again I will call the method which binds the data to the provider table so that the table will reflect the changes.
here is the code,
on drop:
$("#Provider tbody tr").droppable({
drop: function(event){
oController.AssignMember(oProviderId, oMemberId)
}).disableSelection();
Assign member function: here am updating the model.
AssignMember : function(oProviderId, oMemberId){
var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
var oParameters = {};
oParameters.PROVIDER_ID = oProviderId;
oParameters.MEMBER_ID = oMemberId;
oParameters.CREATED_ON = new Date();
oModel.setHeaders({"content-type" : "application/json;charset=utf-8"});
oModel.create( "/PROVIDERMEMBERS", oParameters, null, function() {
var oController = sap.ui.controller("adsm.provider.member_assignment_view");
oController.GetProviderData();
},function(jqXHR) {
var errorMessage = jqXHR.response.body;
var jsondata = JSON.parse(errorMessage);
sap.ui.commons.MessageBox.alert(jsondata.error.message.value);
GetProviderData function: here i bind the data to the table
GetProviderData: function(){
var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
var Context = "/PROVIDERS?expand=ASSIGNEDMEMBERS&$select=NAME,ID,ASSIGNEDMEMBERS/NAME,ASSIGNEDMEMBERS/ID,ASSIGNEDMEMBERS/PROVIDER_ID";
var oTable = sap.ui.getCore().byId("tblProviders");
oModel.read(Context, null, null, true, onSuccess, onError);
function onSuccess(oEventdata){
var outputJson = {};
var p = 0;
var r = {};
if (oEventdata) {
r = oEventdata;
try {
if (oEventdata.d){
r = oEventdata.d;
} catch(e){
//alert('oEventdata.d failed');
try {
if (oEventdata.d.results){
r = oEventdata.d.results;
} catch(e){
//alert('oEventdata.d.results failed');
try {
if (oEventdata.results){
r = oEventdata.results;
} catch(e){
//alert('oEventdata.results failed');
$.each(r, function(i, j) {
outputJson[p] = {};
outputJson[p]["NAME"] = j.NAME;
outputJson[p]["ID"] = j.ID;
outputJson[p]["PROVIDER_ID"] = j.ID;
outputJson[p]["DELETE"] = 0;
var m = 0;
if (j.ASSIGNEDMEMBERS.results.length > 0) {
$.each(j.ASSIGNEDMEMBERS.results, function(a,b) {
outputJson[p][m] = { NAME: b.NAME,
ID : b.ID,
PROVIDER_ID: b.PROVIDER_ID,
DELETE: 1};
m++;
p++;
var oModel = new sap.ui.model.json.JSONModel();
oModel.setData(outputJson);
oTable.setModel(oModel);
function onError(oEvent){
console.log("Error on Provider Members");
oTable.bindRows({
path:"/"
Its working fine in chrome but in IE the model data gets updated but the table is not reflecting the changes at front end.Can anyone suggest me a possible solution to fix this?
Please have a look at the attached screen shots.
Best regards,
Amala Suganya.

Hi Amala,
I think this will help you:
Disabling Cache for CRUD/FI OData scenarios for a UI5 Application on Internet Explorer
Kind regards,
RW

BPM workflow not able to reflect the latest changes done.

Hi.
I've a BPM instance in QA which got logically deleted after entering into exception block .
Now i've made necessary modifications (removing a loop and adding a Switch) in DEV and transported to QA (Repository) successfully. Now QA repository has the latest version of BPM.
Now in QA, I've manually triggered the BPM from http-client and i couldn't see the latest version of BPM in the workflow (PE adapter in SXI_MONITOR). I could only see the older version (with Loop) and hence it again went into exception block. I tried triggering thrice but in vain.
Where am i wrong? Do i need to transport the BPM in DEV Directory to QA Directory in order to reflect the change that i did?
Kindly provide ur inputs.
Thanks.

Hi
I have cheked SWF_XI_CUSTOMIZING, Maintain Runtime Environment is in red-cross mark.
I have performed automatic workflow customizing. Now everything is in green check mark.
Still my IP was in state 99 in sxi_cache.
But...
When i click my IP and click "Activation log" there i saw some warnings and 1 error.
To know more details on the error, i clicked "Display active version" and click "Syntax check" (Ctrl+F2)
Click on the error and we will be directed to the location where the error is.
I have rectified the error. (Error is related to improper usage of container variable)
I have activated the IP in DEV, transported to QA and checked SXI_CACHE.
For my surprise it's still 99! But i couldn't see namespace and repository name for my IP. I thought the cache is getting updated.
I had performed complete cache refresh and delta cache refresh.
Phew.., now my IP is in State 0
I had checked "Display active version" and it shows the latest version of IP.
Again I've stated manual triggering of IP thru http-client and this time it took the latest version.
Conclusion:
There is no need to import the IP again and again into ID
Check "Display active version" in SXI_CACHE before going to test IP.
After transport, wait for a while for the system to update the cache. If it's taking time, refresh cache manually.
Thank you all for your valuable inputs and time.
~Praveen.

Change to RSViewerPage.aspx doesn't reflect the change to the Sharepoint

Similar Messages

Maybe you are looking for