Changed from DS3 to 100mb Ethernet, routing? issues

Just switched over to a 100mb Ethernet circuit from a DS3 and having some issues, routing issues I believe.
I'm attaching a drawing to help paint the picture which I'll explain below:
DS3 setup
DS3 circuit connected to a serial card on Cisco 7206 router, has a /30 network internal to Telco assigned to it
FastEthernet port coming off that router with public IP and subnet(was half of class C /25) assigned to it connected to a 'dummy' 12 port switch(basically acting as a hub)
The 'dummy' switch has 2 Cisco ASA's connected to it, each with a /26 subnet IP from the public block that we had
Also there are 2 Routers connected to this same switch, their IPs are /25 subnet IPs, but they fall outside of the /26 subnet mentioned above for the ASA's.
Hope this is not confusing so far...
Only had one routing statement on the 7206, ip route 0.0.0.0 0.0.0.0 serial1/0 and everything worked as it should, i was able to ping the 7206 IP from any internal device(either of the ASA's, the 2 routers, etc.)
New setup - 100mb Ethernet connection
Circuit connected to FastEthernet port that was empty on Cisco 7206 router, has a /30 network internal to Telco assigned to it - c.c.c.90
Same FastEthernet port as was used for original setup now has a new public IP and subnet(went down to /27) assigned to it connected to a 'dummy' 12 port switch(basically acting as a hub)
The 'dummy' switch has 2 Cisco ASA's connected to it, each now with a /28 subnet IP from the public block
The 2 Routers connected to this same switch, their new IPs are /27 subnet IPs, but they fall outside of the /28 subnet mentioned above for the ASA's.
Per Telco had to change the routing statement to point to an IP instead of an interface, so new statement is
Ip route 0.0.0.0 0.0.0.0 c.c.c.89
The Problem:
I can not ping the 7206 from either of the 2 routers or the 2 ASA's
I can ping the 7206 from my internal network behind the 2 ASA's just fine
I can ping the 2 routers and the ASA's from 7206 just fine also
HELP

Can we see the routing tables for all devices ?
Also the arp tables would be good.
Jon

Similar Messages

Status keeps changing from invisible to online: why the issue is ignored?

There is a serious issue raised in the parallel thread, which is critical for many people: "Status keeps changing from invisible to online" (initiated on ‎16-11-2014 by b.agne, Mac section). In short, when starting using a device, the Skype status changing from "invisible" to "online" - sometimes just for a moment, though enough for others to notice you. These affects very much any type of devices. I am sure the issue has already led to multiple personal crisises and potentially financial losses due to buseness partnership issues (I came close to that myself, and now use anything but Skype for business). The question is: WHY the issue is completely ignored by Skype, Microsoft and expert comunity? Please post the solution if anybody knows how to fix the issue, or suggest how to make Microsoft to know that it should be fixed. Kind regard...

Hi, I also have the same issue. I change the status to Invisible and a later on it is already as "Online", without having even touched/opened Skype. The only way that I see this may happen is that I have the app installed on the smartphone, but before it never had this issue, but from some month ago it started. Any correction or suggestion to work around this issue? Regards

When I change from automatic to manual ethernet from 100baseTX to 1000baseT I lose internet connection

My iMac (21.5-inch, Late 2013) connection is automatically set at 100BaseTX. I changed to manual (from automatic) and selected 1000baseT setting in hardware settings. Lost internet connection when I did so. Is it possible to do this?

You can't magically change a slower connection into a faster one. That has to been done at the switch or the router.

Issue on payroll area which is changing from biweekly to monthly in Mid of

Dear Experts,
I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
Thanks
Chandra

You can do that but it is not that easy as it sounds if you have to do that over a period of say 10-20 years...lot of operational work!!
Also say if you load the retiree action one month ahead say on 03/01/2011. And the employee is retiring on 03/29.
Retire payroll is on 04/08
Biweekly is on 04/15
Now you decide to lock the employees after the 1st biweekly check of March...say which was process 14 days before 04/15 would be 04/01. The employee number is locked between 04/01 to 04/15. For 14 days you have locked these employees!!
What happens if there is adjustment pay...you have to manually go and unlock the employee and lock him after the adjustment check.
I will let you decide based on the comfort, SAP effort, Operational effort and system maintenance.

Have a 1st generation Apple TV, which is not showing as a device in iTunes. Had no problems with Apple TV until I changed from a Windows PC to an iMac. I have changed my IP address, sub mask address and router address in the Apple TV, Can anyone help?

I have a 1st generation apple TV, which was working perfectly until I changed from a Windows PC to a Imac. The Apple TV will not show in Itunes. I have changed the IP address, sub mask and Router IP address. Since changing I have switched everything of and on again. Can anyone help?

I have a new router and computer. I have just remembered that just before my old PC died on me, I transferred my iTunes library to a hard drive. I can't remember exactly just how I got my library back, but there are definately things in my library now that were in my library on my old PC! Hope this makes sense. What do you mean by same location? Do you mean in the same place in the house?
Another difference I have just thought of was my old router was connected directly to the computer bu I have not been able to do this with Sky as my PC is not near a phone socket! Will this make a difference?

Silly question, maybe. I want to change from Verizon DSL to cable, but cable company doesn't supply router. can I use my Airport Extreme as wireless router?

We currently have the following wireless home-network configuration, powered by Verizon DSL.
2 macbook pro’s
1 emachine
HP PhotoSmart 6122 all-in-one printer
Apple TV
Apple Airport Extreme Base Port A 1408
Westell 7500 router
Thinking I’d get wider wireless coverage throughout my 2 bedroom home, I purchased the Airport Extreme. It is connected to the router via its sole usb port. The result was only a tiny increase in speed, and no increase in coverage, so I don’t know why I have it.
We now want to change from DSL to cable, thus ditching Verizon. Our new cable provider supplies the cable box, but no router for wireless networking.
Here are my questions.
Can I use the Airport Extreme (AE) as a wireless router?
If so, how should I hook it up? Should the usb cable go from the AE to the cable box, and all the other devices connect wirelessly?
If not, how should I be using the AE to some advantage? What can I get out of the investment?
Thank you very much for your help! Beatriz

What I wrote has nothing to do with what the cable company charges for their installation. And, usually they will help with the router setup even if you supply your own router. I don't know what they will charge for the modem.
Note that you need to get just a modem. You don't want a modem/router combination. That will make using an AEBS effectively nearly impossible. You will need to ask specifically for just a standalone modem, and that you will supply your own router.

Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

There are some upgrade options available from do it yourself sites.
See the MBair SSD upgrades on mid way down this page:
http://eshop.macsales.com/shop/SSD/OWC/

Today, my iPhone calendar entries are changing from green to blue and back to green again. Anyone else having this issue?

Today, my iPhone calendar entries are changing from green to blue and back to green again. Anyone else having this issue?

No, never had the problem.

Change Moving Average Price when Post Goods issue posted from VL02N

Hi all,
Please help me to find USER EXIT / BADI or Enhancement to change Price - MSEG-DMBTR
when Post Goods Issue posted from transaction VL02N.
Thanks in advance,
Mila.

Hi,
Check these Enhancemnts...
Exit Name           Description
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
Badi Name            Description
DELIVERY_ADDR_SAP    Determine Time-Dependent Delivery Address in Delivery
DELIVERY_PUBLISH     Returns BAdI Implementation: Automatic GR Posting T 2
DELIVERY_PUBLISH     Updating of Delivery in Purchase Order
DELIVERY_PUBLISH     AIP: Delivery Confirmation for Sales Order
Regards
Raghu

HT1386 When I try to sync changes from my playlist to my iphone the sync process gets to step 7, applying changes and then freezes up, the changes are not being put on my iphone. What do I do to correct this issue?

When I try to sync changes from my playlist on the computer to my iphone the sync process gets as far as step 7, applying changes, then freezes up and the changes are not getting to my iphnoe. How do I fix this issue?

Are all these songs associated with the same Apple ID or were some purchased on another account?
Are they tagged properly? In the library does it break an album out into several different albums with a few tracks each?
Check your sync settings for each device. Do you accidentally have only certain songs/albums syncing?

What would you change from factory default on router

Newbie here. For all the master techs out there. What all should be changed from factory defaults on router to make it as safe as possible? thanks

1. Change the router password (default "admin") on the Adminstration tab. Choose a good longer password.
2. Enable wireless security WPA or WPA2 in the Personal/PSK variant.
3. Choose a good passphrase, if possible use a random generated 63 character string.
That's about what you have to do to secure the router and the wireless.

Network problems are preventing connection to Exchange when changing from Ethernet to Wifi

I have a user that connects to Exchange fine while their computer is docked and connected to the LAN by Ethernet, but once they undock they receive the error "Cannot open item. Network problems are preventing connection to Exchange server." They
are connected to the internal company Wi-Fi and nothing changes about their computer's status other than changing from being on the wired network to wireless.

Hi,
What's your Outlook version and Exchange version? Outlook 2007 or Outlook 2010/2013? Please check your Wifi settings and make sure your Wifi password is correct.
In Outlook, please click File > Account Settings > Security and
make sure the Encrypt data between Microsoft
Outlook and Microsoft Exchange is checked.
Regards,
Winnie Liang
TechNet Community Support

NO HELP WITH ROUTING ISSUES FROM VERIZON

Spend 2 hours with technical support to no avail. Have routing issues where I can’t get from my FIOS residential account to remote web site abroad. Trace route fails at so-0-0-0.XT1.AMS2.ALTER.NET [146.188.14.209]. FIOS technical support is incapable of doing any troubleshooting beyond basic customer premises equipment, refusing to escalate the case to network engineering team. I was basically told by FIOS tech support supervisor {edited for privacy} that this is not Verizon’s problem and no help will be provided. What is even more frustrating that Verizon agents are not capable of receiving emails from customers with details such as trace route.
Is there anyone at Verizon monitoring this and able to help? Just in case, ticket number that I have with Verizon is {edited for privacy}
Here is trace route details.
tracert 212.44.136.226
Tracing route to brserv.bridgetour.ru [212.44.136.226]
over a maximum of 30 hops:
1     1 ms    <1 ms     1 ms Wireless_Broadband_Router.home [192.168.1.1]
2    12 ms     9 ms     9 ms L100.BSTNMA-VFTTP-71.verizon-gni.net [98.118.28
1]
3    16 ms    19 ms    19 ms G0-6-4-1.BSTNMA-LCR-21.verizon-gni.net [130.81.
75.132]
4    45 ms    15 ms     8 ms ae3-0.BOS-BB-RTR1.verizon-gni.net [130.81.151.6
5    19 ms    19 ms    19 ms 0.xe-3-2-0.IL1.NYC9.ALTER.NET [152.63.26.81]
6    21 ms    19 ms    19 ms 0.ge-1-2-0.IL1.NYC12.ALTER.NET [152.63.26.86]
7   107 ms   108 ms   107 ms so-0-0-0.XT1.AMS2.ALTER.NET [146.188.14.209]
8     *        *        *     Request timed out.
9     *        *        *     Request timed out.
10     *        *        *     Request timed out.
11     *        *        *     Request timed out.
12     *        *        *     Request timed out.
13     *        *        *     Request timed out.

BT help aren't always that helpful, but BT engineers claim that it is a BT sales issue and nothing to do with them seems a bit extreme.
Are you sure your daily speed is 8Mbits, not 8Mbytes? How are you measuring this? Is it the number coming from the BT speedtest?
If it really is 8Mb, then I think it's worth checking with the mods;  at: http://bt.custhelp.com/app/contact_email/c/4951 . But be aware they take 3 working days to reply: sometimes more if busy.

I recently changed from a pc to a mac book. The major issue I am having right now is getting yahoo to work properly. The major thing is autocomplete does not work and I do not know how to load my contacts to "mail".

I recently changed from a pc to a mac book. The major issue I am having right now is getting yahoo to work properly. The major thing is autocomplete does not work and I do not know how to load my contacts to "mail". Furthermore, I cannot attach any type of documents to my emails (Yahoo says there is a problem). I suspect there is a setting somewhere, but I don't know where. Javascript is enabled, so I am out of options

Which os are you using?
Yahoo issues should be posted in their forums or contact Yahoo tech support.

What are the issues of the Tax Code length change from 2 to 4 characters?

Dear All,
I understand sales tax codes (T007A-MWSKZ) will be changing from 2 characters to 4 characters in 2010. Can anyone explain the implications this is expected to have?
Will the impact to the system be large or small?
What factors will we need to consider in preparation for this change?
Kind regards,
Mark
Edited by: Mark Walker on Jul 20, 2009 9:23 PM
Edited by: Mark Walker on Jul 20, 2009 9:32 PM
Edited by: Mark Walker on Jul 20, 2009 9:33 PM

Hello Mark,
Please follow OSS notes which you mensioned in your message. SAP developer and support team explained how to customize and use new codes surely on your system.
Regards,
Burak

Changed from DS3 to 100mb Ethernet, routing? issues

Similar Messages

Maybe you are looking for