Changed Routers No Connectivity for Amazon Fire TV

Recently purchased the ActionTec M1424WR router from Verizon, replacing the Westell 9100 EM I have been using for years. Amazon Fire TV worked great until I installed the new router. Fire TV is connected with micro HDMI to TV. Any help would be greatly appreciated. Thanks

MED wrote:
Recently purchased the ActionTec M1424WR router from Verizon, replacing the Westell 9100 EM I have been using for years. Amazon Fire TV worked great until I installed the new router. Fire TV is connected with micro HDMI to TV. Any help would be greatly appreciated. Thanks
Are you connecting the Fire tv to the router wireless or by ethernet? Have you gone into the Fire tv's settings and reset the network?

Similar Messages

Amazon Appstore Announces In-App Purchasing Service for Kindle Fire and Other Android Devices

Link to announcement:
http://phx.corporate-ir.net/phoenix.zhtml?c=176060&p=irol-newsArticle&ID=1681481&highlight =
Bob

A word of caution:
the Amazon Appstore checks for Kindle Fire support AFTER it accepts app updates. So a developer can unknowingly break KF support, and still get app updates accepted into the store!
Here is an e-mail I just sent to Amazon's KF team:
FYI, there is a significant loophole in your submission pipeline:
1) All my apps use Adobe AIR.
2) For the longest time, they were all compiled with AIR 2.7 so there was no problem. I got a bunch of downloads, including from Kindle Fire users.
3) A week ago, I updated most of my apps to AIR 3.1, and broke Kindle Fire support, without my realizing it, because I didn't know that the KF only supports AIR 2.7. Unfortunately, all the updates with broken KF support were accepted into the store!!!
4) Now I am getting users complaining that their apps no longer work on Kindle Fire.
What should have happened: NONE of the updates should have been accepted after it was realized by your review team that they broke Kindle Fire support, while previous versions worked fine on it and KF users downloaded them. Reviewing KF support separately, after the initial review/acceptance, is not a good process!
In any case, I have re-submitted all my apps with the release note 'Restored Kindle Fire support'. What I did was use 'captive runtime' for compiling all my AIR 3.1 apps, which normally means that the app will not require an external AIR runtime to function. Hopefully, this will work this time. If not, I am going to have to re-compile everything using AIR 2.7, which is a major drag since some of the features I depended on are part of AIR 3.1.

Creating in app-purchases for Amazon Kindle Fire

Dear Adobe Community,
my settings so far:
I'm using the InDesign CS6 Digital Publishing Suite,
running on a Professional Subscription.
And ran into some problems with the Amazon Fire in app-purchase system. Let me explain:
My multi-folio app is currently running on Apple iOS and Android and was - accordingly - successfully published into the Apple Store and Google Play.
Now, the next step was the publishing on Amazon Kindle Fire via the Amazon Developer Console.
The viewer is running fine, no problems there; the same goes for the free folio.
On the other hand, the in app-purchases won't. The in app-purchase is submitted, the Amazon Developer portal marked it as "Live", but it won't appear in the viewer.
According to this discussion: Amazon in App & Subscription Purchases it is necessary to match the Amazon SKU number with the Product ID in the Folio Producer, which I did. Do I still have to contact Amazon to achieve a successful launch?
Viele Grüße from Germany,
Maximilian

DPS no longer supports Amazon in-app purchases.
Neil

When will Firefox Mobile for Kindle Fire be available in Amazon App store and why has it not been available sooner?

Mozilla should of made FF Mobile compatibility for Amazon Store a priority long ago! Makes me consider using another browser as my default browser on my Desktop! Also this community support site is worthless garbage! Months or year old problems without resolution or address, unacceptable!

Hi Whitebuck,
We did have Firefox for Android in the Amazon store, but had to pull it because the apk had been altered by Amazon. Sorry for the confusion there, it is something we are working on, but the progress is slow.
However, you can get Firefox for your Kindle from our FTP servers very easily. Note that you must enable installation of non-Amazon market apps in your settings first. Then, download from here:
http://ftp.mozilla.org/pub/mozilla.org/mobile/releases/15.0/android/multi/fennec-15.0.multi.android-arm.apk
You will need to update manually, so you should bookmark the following article with the FTP information for later use:
[[Download and install Firefox for Android]]
We are always working hard to answer every question that is asked in the forum and we are community-driven, so I hope you have success with Firefox on your Kindle.
-Michelle

How to change keyboard map fmrweb.res for different forms

I'm using Oracle Forms 10g with Oracle Forms and Reports Application server 10g.
I know how to change fmrweb.res to change how keys function on web forms. The problem I'm having is I only know how to assign the fmrweb.res file when connecting to the application server, which means all forms running on that session have to use the same keyboard mapping.
I know you can change the defualt fmrweb.res for all the forms executed on the application server
and you can change the fmrweb.res file in the URL like
server/forms/frmservlet?Form=login.fmx&config=dataentry
(where dataentry is defined in the formsweb.cfg file)
and in the config section I have
[dataentry]
term=fullpath/fmrweb_new.res
My question is, is there a way to pick a different fmrweb.res file based on the form?
Can you specify multiple forms in the basexxx.htm file(basejini.htm) in the PARAM section like
<PARAM NAME="serverArgs"
VALUE="module=form1.fmx term=fillpath/filename1.res"
VALUE="module=form2.fmx term=fillpath/filename2.res"
VALUE="module=form3.fmx term=fillpath/filename3.res"
VALUE="module=form4.fmx term=fillpath/filename4.res">
Is there a way to pass term=fullpath\filename.res to the Oracle Forms Web Runtime process for each form using call_form, open_form, or new_form?
Edited by: user537213 on Sep 19, 2008 5:38 PM
Edited by: user537213 on Sep 19, 2008 6:24 PM

Posiible approach (i now it sounds strange):
Configure your enter-key to fire the KEX-EXEQRY-Trigger.
In the dataentry-form-module: Overwrite the KEY-EXEQRY-Trigger so thtat is just does a NEXT_ITEM; .
I know there may be other implications depending of the compelixity of your dataentry-form, but maybe this helps.

Flex mobile app for Kindle Fire? is it possible?

Hi, I read this in the kindle amazon developer faq, is it possible to develop Flex 4.6 mobile apps for Kindle fire? even thought it doesn't show up in the
list of devices?
any Gotcha's I need to look out for?
Is Adobe AIR pre-installed on Kindle Fire?
Yes, developers can publish Adobe AIR 3 applications for the Kindle Fire by packaging them as ‘captive runtime’ applications. However, these captive runtime applications will not support on-device debugging.
thanks,

More info here: http://blogs.adobe.com/flashplatform/2011/11/amazon%E2%80%99s-kindle-fire-lights-up-app-cr eativity.html

Recent Spotify Connect problems on Amazon Fire TV

Hello! after the recent update to the Amazon Fire TV I am no longer able to use Spotify Connect on the Fire TV.When I initiate a connection from my cell phone (Android, Nexus 5) Sporitfy Connect launches, but ends up in an error message "Hm. Irgendwas ist schiefgelaufen. Probiere es noch mal." (german) ("Uups, something went wrong. Please try again."). I tried again and again for some days now and I start to feel a bit of frustration now. Greetings, spotifyphilipp

Same here, Spotify Connect stopped working with the current FireTV firmware. adb logcat doesn't show any helpful information: I/ActivityManager( 700): START u0 {act=android.intent.action.MAIN flg=0x10020000 pkg=com.spotify.tv.android cmp=com.spotify.tv.android/.SpotifyTVActivity (has extras)} from pid 895
W/ContextImpl( 700): Calling a method in the system process without a qualified user: android.app.ContextImpl.sendBroadcast:1353 com.android.server.am.ActivityStack.startActivityMayWait:3199 com.android.server.am.ActivityManagerService.startActivityAsUser:2539 com.android.server.am.ActivityManagerService.startActivity:2528 android.app.ActivityManagerNative.onTransact:141
D/InputManager( 700): Activity onCreate received.

My account asks me to change my password every week for no reason and i have different security questions for the same account

My account asks me to change my password every week for no reason and i have different security questions for the same account

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Try changing the security on the router. Start with no securty as a test.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have PSTouch v1.3. How to get v1.4 for Kindle Fire HD?

Hi, I bought PSTouch for my Samsung Galaxy 10.1 Tab, went through some of the tutorials, and went to Adobe Headquarters in San Francico when they gave a very good demo on it.
   So, I've paid the $9.95 and have enjoyed it. (It seems to behave differently now that my Samsung 10.1 Tab was upgraded from Honeycomb to Ice Cream Sandwich but that's a side issue.)
BUT, the main thing -- I have a Kindle Fire HD 7" and my 8.9" version is coming next week.
Google Play tells me that the PS Touch app (they are on v1.3 and the KFire version is v1.4) is compatible with my Samsung 10.1 and is already installed.
Amazon says its v1.4 version is compatible with my Kindle Fire HD 7" and my Samsung Galaxy 10.1 Tab (and I've paid for the latter).
The Google Play site will not recognize Amazon Kindle Fires of any type.   Therefore, the only way for me to get this latest v1.4 for Kindle Fire HD at Amazon is to pay Amazon *another* $9.95 to be able to download this v1.4 update.
   Is there ANY way that you know of that I can just get the v1.4 update for my Kindle Fire without paying a 2nd time for PS Touch? Thanks.

Hello. I felt the same frustration a couple of weeks ago- after downloading what was supp.-to be the greatest thing since sliced bread. So I opted for FF 3.6 at, at least until I could decipher FF4 - which I still have not! As I recall, I simply Googled : Firefox 3.6 or Firefox 3.6 version downloads and a link for that version was listed.

Can I use the same Adobe ID for Amazon AppStore and Google Play?

Hello! We've been on the iPad for two years now and have finally taken the leap designing a version of our magazine for Amazon's Kindle Fire lineup. I'm curious whether we can share an Adobe ID between Amazon AppStore and Google Play, so that all of our Android folios stay in sync whether the user is on Amazon hardware or another vendor.
Thanks in advance for any insight.

Yes, you can use the same Adobe ID (Title ID) for both Amazon Appstore and Google Play Store. In DPS App Builder, create two separate apps, each time specifying the target store (in the App Builder, Google Play is still called Android Market). However, I do not recommend that you use the same Adobe ID for iOS and Google/Amazon unless you're offering custom entitlement (Enterprise only).
One key difference between Kindle Fire viewers and Android viewers is that Kindle Fire viewers don't display the nav bar. Here's a detailed article about targeting Android/Amazon devices:
http://blogs.adobe.com/indesigndocs/2012/10/creating-dps-folios-for-android-devices.html

Firefox 25.0 disabled kaspersky virtual keyboard and safe money ect how do i change back to the previous version as fire fox tells you to late in the update

firefox 25.0 disabled kaspersky virtual keyboard and safe money ect how do i change back to the previous version as fire fox tells you to late in the update to back track

Hello Bretus,
Thank you for contacting Mozilla Support and I'm sorry this update isn't compatible with the extensions you're using.
The Kaspersky support forums mention that those extensions will be updated soon, so that they are compatible with FF25. In the meantime, we do not recommend that you downgrade your version of Firefox, but you can find instructions and download locations for previous versions here:
[[Install an older version of Firefox|Install an older version of Firefox]]
Please let us know if this solves your issue.
Cheers, Patrick

Simple question: Are Creative Cloud apps currently or will be compatible with the new Amazon Fire phone?

Simple question: Are Creative Cloud apps currently or will be compatible with the new Amazon Fire phone? My friend owns one and says since it's a fairly new operating system that nothing is compatible except the Amazon apps. Is this correct and does Adobe plan to support that OS in the future?

If that uses the Android operating system, anything for Android works
Mobile Apps
As far as future plans, I don't work for Adobe so have no idea
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for feature requests

When will single edition apps be available on Android, Amazon Fire, and Blackberry Playbook?

When will single edition apps be available on Android, Amazon Fire, and Blackberry Playbook? This is very important as we were told we would soon be able to publish on all devices and not just using the in-app service. My company is currently using the Professional Edition of Adobe DPS.
Thank you and best wishes,
Alex Rullo

Single-Folio-Apps (created with the Single-Edition or a professional licence) include the folio itself — resulting in a big app size.
Currently, the Android Market has a 50MB limit for .apk-Apps. (http://www.google.com/support/androidmarket/developer/bin/answer.py?hl=en&answer=113469)
At the Google IO this year they talked about raising this limit up to 4GB, but that is more complicated. the app itself still has 50MB of allowed size, but there are additional data handled by the android market that can be downloaded upon starting the 50MB .apk app from the android market.
that targets games mostly. Adobe has to think about a way to split up viewer and content to make use of this feature.
However, Multi-Folio-Apps are currently possible (only with Pro Edition) on Android. They are relatively small (2-5 MB) and the .folios are comming from the adobe servers (download costs!). You need to create a new role/magazine in the account administration and publish your app as a multi folio app.
—Johannes

Case Study: OnlineBackup Proves Versatile for Web Fire Communications, Inc.

Vembu OnlineBackup automates the backup of files, email, databases and applications on servers and desktops to a secure offsite cloud location for instant disaster recovery. Vembus cloud is hosted on Amazon AWS servers which provide a solid foundation to store data while guaranteeing availability by redundantly storing business critical data and applications. Our solution greatly […]
The post Case Study: OnlineBackup Proves Versatile for Web Fire Communications, Inc. appeared first on vembu.com.
Read More

A daily dose of today's top tech stories:Russia hacks thePentagon–US officials reported today "that Russia launched a 'sophisticated cyberattack' against the Pentagon's Joint Staff unclassified email system, which has been shut down and taken offline for nearly two weeks,"according to NBC. Theattack occurred on July 25 and involved "some 4,000 military and civilian personnel who work for the Joint Chiefs of Staff."
Microsoft expands its bug bounty programs–In a blog post today, the Microsoft Security Response Center announced that it will be raising its "Bounty for Defense maximum from $50,000 USD to $100,000 USD" and expanding its programs. Whether this has to do with the launch of Windows 10 across multiple platforms is anyone's guess (but you might call it a fair one).
Meet DoctorWatson – IBM turns its supercomputer tomedicine –In a...

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

http://support.apple.com/kb/ht5621

Changed Routers No Connectivi​ty for Amazon Fire TV

Similar Messages

Maybe you are looking for

Changed Routers No Connectivity for Amazon Fire TV