Changes are not applying to the reports
hi all
i have moved the RPD and catalog file to UAT there i got few changes
i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
so i again i copied same RPD and catalog to UAT now it is working fine,
why the changes are not applied to the reports that i have moved to UAT
is it mandatory to move RPD and catalog to the other environment ??
Thanks
Hi,
if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
If not you need to deploy RPD and catalog into UAT.
By,
KK
Similar Messages
-
I have made a couple of changes to a movie and they are not applying in the canvas.
EG - I have changed the colour of some text that appears. The preview icon on the clip in the timeline has changed the colour of the text, the preview in the viewer has changed, but the canvas hasnt. Also it isnt asking me to render which it usually would.You can quickly force a render by lowering, then raising the opacity of the clip. There are also more involved/complex ways to replace a render.
-DH -
Data Migration Opening Balances are not updating in the Report F.08
Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
KishoreHi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore -
Changes are not reflecting in the Quality
Hi,
These are standard SAP Components. I have imported the ESS and MSS Packages.
Actually 3 Development Components are using in my application (Tra,TraTri and TraTre).Tra is the root DC.
I have made changes to those objects and sucecessfully build without errors.
After check-in all activities those activities are working fine in Development system.
But those changes not refclecting in Quality system. So i was founded build log error in Consolidation.
I was fixed the error in the Development system and build the components without build error.
still now changes are not reflecting in the quality system.
But out of 3 DCs(Tra,TraTri,TraTre) Tra and TraTre are working fine in Quality(changes are reflecting) only problem in TraTri DC (changes are not reflecting in the Quality)..
Please help me as soon as possible....Its very help full for me
Regards
Sudhakar Reddy AHi Slava,
very very thanks to you for the fast reply. but one thing in my side.
When i release the activities after successful build, i export those changes and place them in the import queue of the consolidation system in the CMS.
The export in the SAP NetWeaver Developer Studio packs all selected activities into a change request, and then places them in the import queue of the consolidation system.
When the my system administrator imports this request into the consolidation system, the released changes are integrated into the DTR workspace of the consolidation system; the build server compiles the modified components.
my system administrator findout build error in consolidation system:
[wdgen] [Error] .PersonnelNumberCheck: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
[wdgen] [Error] .PersonnelNumberCheck.I_Employeenumber: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
[wdgen] [Info] com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.E_Name: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
[wdgen] [Info] com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Type: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_No: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Field: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.System: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V1: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V3: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V2: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_Msg_No: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Number: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V4: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Parameter: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Id: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Row: The mapping definition is inconsistent, the mapped context element does not exist.
[wdgen] [Error] com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextValueAttribute EmployeeName [readOnly]: The context attribute has to be read-only. (Hint: As the mapped context attribute is read-only this attribute has to be read-only, too.)
I was fix error in my development system with out any build errors. still now not working ...pls give me any suggestion.i dont have access to consolidation system.
Regards,
Sudhakar -
Query changes are not reflecting in the Workbook.
Hi All,
I have modified the query by adding attributes. But the changes are not reflecting in the workbook.
Do i need to insert the query again in the workbook or is there any option that will reflect the changes in the workbook
Thanks in Advance,
Suneel.Hello Suneel,
if you insert the query again, it will work, but it is not the best way to delegate the query changes to the workbook.
Just open your query from within your workbook (BEx menu 'change global definition') and use the green button at the top left in order to transfer the new query structure to the workbook. The query will be executed and you should see the changes.
Don't forget to save the workbook afterwards.
Regards,
Kirill -
Changes are not reflecting in the discoverer workbook
Hi ,
I have a report created with user Disco(Disco.Report_name).Now I need to add a column to it and i have done that with other user Discodev but when I save it the changes are not reflected on Disco(Disco.Report_name) rather it is being saved with user Discodev(*Discodev.Report_name*) .
The User wants that the changes should be reflected on Disco.Report_name (I can't use the credentials of Disco to do this as it is also a user) .
Appreciate your help !!
Discoverer Version 4i
Thanks ,
VijayHi West,
Thanks for the reply.
I want to get clarified one thing, Is there any option where DISCO user can give Privileges to DISCODEV to make the changes,as the DISCO user is not a common user I have a problem in making the changes.
Thanks,
Vijay -
Trigger changes are not committing to the database
I have 9iAS and 9i DB both on my laptop.
I am having a problem in which a trigger run off a WHEN_BUTTON_PRESSED function is not committing the changes to the database. In the trigger I have:
1 record insert into table A.
1 record update to table B.
1 record insert into table C.
1 delete from table D.
None of the data is related.
I have tried various combinations of the below to get the changes to commit:
POST;
COMMIT_FORM;
Exit_Form(NO_COMMIT, NO_ROLLBACK);
MESSAGE('Got past COMMIT');
COMMIT;
CLEAR_FORM(NO_COMMIT);
ENTER_QUERY;
I am getting varying amounts of "FRM: 40508 Oracle Error: Unable to INSERT record" statements. Even so, many times the form would act as if the changes had been properly applied. But when I did a separate DB verification, I would see that the changes are not being committed. Also, most of the time the changes would also be reflected in the calling form queries, but when I exit, all changes are rolled back no matter how many commit stmts are in the trigger.
I have finally gotten the form to do what I want to do (the 4 steps noted above), but I had to add a FORMS_DDL('COMMIT'); stmt and I am still getting a FRM 40508, but at least the changes are appearing in the db.
Any ideas on why so many troubles in getting the changes to commit??? I have spent a ton of hours trying "what ifs" to see what might work. Also, this trigger is the only real "code" in the forms.
KimBrett -
You're probably right about the intention, but this is a place where people can come and share styles, ideas, and coding tricks, I don't understand why someone would say that. Additionally, I had a professor who was a complete momo that said that all the time (consequently, his lax attitude towards teaching crippled the IS program where I graduated and most likely will cause it to no longer be available). It's a personal peeve of mine, just to let you know where I was coming from.
Secondly, the problem I'm having may have to do with what you said, however I can't be sure. To give a better description of my scenerio, I created a form that allows the user to load information about an employee by querying a SSN. Most of this information is for display only. Six fields are available to be updated and I wrote a DML UPDATE statement that I placed inside a WHEN-BUTTON-PRESSED trigger. However, these changes won't be written to the DB because Forms is attempting to write my entire datablock, instead of just following the specified DML statements. I'm at a loss as to why this would happen, but for simplicity's sake, I would listen to ideas of how to suppress this from happening so only my statements are used when updating the DB. If you can help, thank you, if not, then thank you for your time.
Steve -
Lead time values are not appearing in the report for current year.
Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman -
Changes are not reflecting in the table control in 2nd time
Hi,
In BSP Portal Asset management page, General,cost center, allocations ..etc tabs are there.and i have maintain button also in this page
After filling all these things, when i click the maintain button , the mandatory fields [General,costcenter,Eval1,Eval2]are displaying in the tablecontrol popup window,
In the tablecontrol popup whatever i selected ,it is displaying fine..
In the popup,save buttons is there.Once if i clicked the save button, popup will vanish and datas are stored in the internal table.and again it will come to portal main page.Now if i select the different values in the allocations dropdown, old vales are displaying in the tablecontrol popup. new dropdown values are not diaplying in the popup.what can i do?
This is my code: popupdisplay.htm
==============
<%
* DATE CHANGE.....: 20/07/2007 *
* AUTHOR..........: Mohan Pitchaimani (inmpi0) *
* CHANGE DESCR....: DIsplay the popup when clicking the maintainbutton *
* R/3 RELEASE... : 2.1 *
* MODIFICATION ID : MOD-001 *
* RIFE/TPR/SCR No.: FSSE698 BSP Asset Mass Creation BSP Request form * *
* RT/TRANSPORT....: 12403 / D94K969999 *
%>
<%--********************Begin of changes mod-001 on 20/07/2007 *****************--%>
<%@page language="abap"%>
<%@extension name="bsp" prefix="bsp" %>
<%@extension name="htmlb" prefix="htmlb" %>
<%@ extension name="/DS1/mdm" prefix="mdm" %>
<%
data :
lt_columns type /DS1/MDM_tt_table_control,
ls_column type /DS1/MDM_ms_table_control,
l_onload type string,
lr_field type ref to /ds1/cl_mdm_bspfield_services,
lw_maintain type /ds1/fss_ms_popup,
l_editable type char1,
lt_drop type /ds1/mdm_tt_dropdowns,
ls_sc type /DS1/MDM_MS_F4_SEARCH_CRITERA,
ls_rmap type /DS1/MDM_MS_F4_RESULTS_MAP,
ls_drop type /ds1/mdm_ms_dropdown,
l_number type int4.
%>
<%--********************Close the window **************************************** --%>
<% data: event TYPE REF TO CL_HTMLB_EVENT.
event = CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
%>
<%
if event is not initial.
CASE event->id.
WHEN 'con'.
%>
<script language="javascript">
self.close();
</script>
<% endcase.
endif.
%>
<%--************************ Popupdisplay ***************************************** --%>
<htmlb:content design = "design2002+design2003"
rtlAutoSwitch = "true"
forceEncode = "ENABLED" >
<htmlb:page title = "Maintain fields should be different from similar assets">
<script type="text/javascript" language="JavaScript" src="../MDM_GENERIC/Javascript/MDM_Generic.js"></script>
<%@ include file = "asst_scripts_change.htm" %>
<%@ include file = "../MDM_GENERIC/TableControlStyleInclude.xml" %>
<% delete controller->r_asset_data->T_MAINTAIN where TXT50 = space. %>
<% if controller->r_asset_data->t_maintain is initial.
lw_maintain-TXT50 = controller->r_asset_data->w_generaldata-DESCRIPT.
lw_maintain-INVNR = controller->r_asset_data->w_generaldata-INVENT_NO.
lw_maintain-kostl = controller->r_asset_data->w_timedependantdata-costcenter.
lw_maintain-ORD41 = controller->r_asset_data->w_allocations-EVALGROUP1.
lw_maintain-ORD42 = controller->r_asset_data->w_allocations-EVALGROUP2.
lw_maintain-ORD43 = controller->r_asset_data->w_allocations-EVALGROUP3.
lw_maintain-ORD44 = controller->r_asset_data->w_allocations-EVALGROUP4.
lw_maintain-GDLGRP = controller->r_asset_data->w_allocations-EVALGROUP5.%>
<%--******************** Appending the maintained values *************************** --%>
<%
if controller->r_asset_data->G_NO_ASSETS NE space.
clear l_number.
DO controller->r_asset_data->G_NO_ASSETS TIMES.
l_number = l_number + 1.
lw_maintain-SERNR = l_number.
APPEND lw_maintain TO controller->r_asset_data->t_maintain.
ENDDO.
else.
DO controller->r_asset_data->g_no_similarsubno TIMES.
APPEND lw_maintain TO controller->r_asset_data->t_maintain.
ENDDO.
endif.
controller->G_POPUP_FLAG = 'X'.
endif.
%>
<%--******************** VAlidations for the Requester and Approver screen *************************** --%>
<% if controller->ms_request_header-req_status = '00'.
ls_column-columnname = 'SERNR'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
endif. %>
<% if controller->ms_request_header-req_status = '05'.
ls_column-columnname = 'SERNR'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
ls_column-columnname = 'TXT50'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
ls_column-columnname = 'INVNR'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
ls_column-columnname = 'KOSTL'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
endif. %>
<% if controller->ms_request_header-req_status = '06'.
ls_column-columnname = 'SERNR'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
ls_column-columnname = 'TXT50'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
ls_column-columnname = 'INVNR'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
ls_column-columnname = 'KOSTL'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
ls_column-columnname = 'ORD41'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
ls_column-columnname = 'ORD42'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
ls_column-columnname = 'ORD43'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
ls_column-columnname = 'ORD44'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
ls_column-columnname = 'GDLGRP'.
ls_column-no_edit = 'X'.
append ls_column to lt_columns.
clear ls_column.
endif.
%>
<% if controller->ms_request_header-req_status = '00'. %>
<html>
<body>
<p>
You can Maintain/Edit details of Similar Assets/Similar Sub - Assets . Click confirm to maintain the entries
</p>
</body>
</html>
<% elseif controller->ms_request_header-req_status <> '00'. %>
<html>
<body>
<p>You can view details of of Similar Assets/Similar Sub - Assets.
</p>
</body>
</html>
<% endif.%>
<htmlb:form id='frmMain' >
<htmlb:group>
<htmlb:groupBody>
<htmlb:gridLayout columnSize ="2"
rowSize ="15"
width ="150%">
<htmlb:gridLayoutCell columnIndex="2" rowIndex="1" horizontalAlignment="left" verticalAlignment="top" width="200" wrapping="false">
<%
ls_column-columnname = 'TXT50'.
ls_column-input_type = '1'.
ls_column-data_type = '1'.
APPEND ls_column TO lt_columns.
CLEAR ls_column.
ls_column-columnname = 'INVNR'.
ls_column-input_type = '1'.
ls_column-data_type = '1'.
APPEND ls_column TO lt_columns.
CLEAR ls_column.
* build F4 Search sceen
ls_sc-field_name = 'KOKRS'.
ls_sc-data_element = 'KOKRS'.
ls_sc-f4_from_data_element = 'X'.
ls_sc-value = 'OP01'.
append ls_sc to ls_column-lookup_params-searchcriteria.
clear: ls_sc.
ls_sc-field_name = 'BUKRS'.
ls_sc-data_element = 'BUKRS'.
ls_sc-f4_values = /DS1/CL_MDM_F4_VALUES=>GET_VALUES_FOR_COCE_COMPANY( ).
append ls_sc to ls_column-lookup_params-searchcriteria.
clear: ls_sc.
ls_sc-field_name = 'KOSTL'.
ls_sc-data_element = 'KOSTL'.
append ls_sc to ls_column-lookup_params-searchcriteria.
clear: ls_sc.
ls_sc-field_name = 'KOSAR'.
ls_sc-data_element = 'KOSAR'.
ls_sc-f4_from_data_element = 'X'.
append ls_sc to ls_column-lookup_params-searchcriteria.
clear: ls_sc.
ls_sc-field_name = 'VERAK'.
ls_sc-data_element = 'VERAK'.
append ls_sc to ls_column-lookup_params-searchcriteria.
clear: ls_sc.
ls_sc-field_name = 'LTEXT'.
ls_sc-data_element = 'KLTXT'.
append ls_sc to ls_column-lookup_params-searchcriteria.
clear: ls_sc.
ls_sc-field_name = 'SPRAS'.
ls_sc-data_element = 'SPRAS'.
ls_sc-f4_values = /DS1/CL_MDM_F4_VALUES=>GET_VALUES_FOR_LANGU( ).
ls_sc-value = sy-langu.
append ls_sc to ls_column-lookup_params-searchcriteria.
clear: ls_sc.
ls_sc-field_name = 'TELX1'.
ls_sc-data_element = 'TELX1'.
append ls_sc to ls_column-lookup_params-searchcriteria.
clear: ls_sc.
ls_sc-field_name = 'FUNC_AREA'.
ls_sc-data_element = 'FKBER'.
ls_sc-f4_from_data_element = 'X'.
append ls_sc to ls_column-lookup_params-searchcriteria.
clear: ls_sc.
ls_sc-field_name = 'PRCTR'.
ls_sc-data_element = 'PRCTR'.
append ls_sc to ls_column-lookup_params-searchcriteria.
clear: ls_sc.
ls_sc-field_name = 'REGIO'.
ls_sc-data_element = 'REGIO'.
append ls_sc to ls_column-lookup_params-searchcriteria.
clear: ls_sc.
* set parameters for f4 lookup
ls_column-lookup_params-POPUPHEIGHT = '550'.
ls_column-lookup_params-POPUPWIDTH = '750'.
ls_column-lookup_params-SEARCHMAXRESULTS = '500'.
ls_column-lookup_params-SEARCHRESULTSKEY = 'KOSTL'.
ls_column-lookup_params-SEARCHTABLE = 'CSKS'.
* Set Column for Cost center
ls_column-columnname = 'KOSTL'.
ls_column-input_type = '4'.
ls_column-data_type = '1'.
ls_column-tooltip_fom_de = 'X'.
ls_column-scrollable = ' '.
ls_column-length = '15'.
ls_column-maxlength = '15'.
ls_column-halign = 'RIGHT'.
ls_column-valign = 'TOP'.
APPEND ls_column TO lt_columns.
CLEAR ls_column.
* Set Column for Evaluation group 1
ls_drop-dropdown_id = 'evlg1'.
ls_drop-values_tab = /DS1/CL_MDM_F4_VALUES=>GET_VALUES_FOR_EVALGRP1( im_group = '1'
im_bukrs = controller->R_ASSET_DATA->W_KEY-COMPANYCODE ).
append ls_drop to lt_drop.
ls_column-columnname = 'ORD41'.
ls_column-input_type = '2'.
ls_column-DROPDOWN_ID = 'evlg1'.
APPEND ls_column TO lt_columns.
CLEAR ls_column.
* Set Column for Evaluation group 2
ls_drop-dropdown_id = 'evlg2'.
ls_drop-values_tab = /DS1/CL_MDM_F4_VALUES=>GET_VALUES_FOR_EVALGRP1( im_group = '2'
im_bukrs = controller->R_ASSET_DATA->W_KEY-COMPANYCODE ).
append ls_drop to lt_drop.
ls_column-columnname = 'ORD42'.
ls_column-input_type = '2'.
ls_column-DROPDOWN_ID = 'evlg2'.
APPEND ls_column TO lt_columns.
CLEAR ls_column.
* Set Column for Evaluation group 3
ls_drop-dropdown_id = 'evlg3'.
ls_drop-values_tab = /DS1/CL_MDM_F4_VALUES=>GET_VALUES_FOR_EVALGRP1( im_group = '3'
im_bukrs = controller->R_ASSET_DATA->W_KEY-COMPANYCODE ).
append ls_drop to lt_drop.
ls_column-columnname = 'ORD43'.
ls_column-input_type = '2'.
ls_column-DROPDOWN_ID = 'evlg3'.
APPEND ls_column TO lt_columns.
CLEAR ls_column.
* Set Column for Evaluation group 4
ls_drop-dropdown_id = 'evlg4'.
ls_drop-values_tab = /DS1/CL_MDM_F4_VALUES=>GET_VALUES_FOR_EVALGRP1( im_group = '4'
im_bukrs = controller->R_ASSET_DATA->W_KEY-COMPANYCODE ).
append ls_drop to lt_drop.
ls_column-columnname = 'ORD44'.
ls_column-input_type = '2'.
ls_column-DROPDOWN_ID = 'evlg4'.
APPEND ls_column TO lt_columns.
CLEAR ls_column.
* Set Column for Evaluation group 5
ls_drop-dropdown_id = 'evlg5'.
ls_drop-values_tab = controller->GET_VALUES_FOR_EVALGRP5( im_bukrs = controller->R_ASSET_DATA->W_KEY-COMPANYCODE ) .
append ls_drop to lt_drop.
ls_column-columnname = 'GDLGRP'.
ls_column-input_type = '2'.
ls_column-DROPDOWN_ID = 'evlg5'.
APPEND ls_column TO lt_columns.
CLEAR ls_column.
* Input type
*1 Text box
*2 Drop down
*3 Checkbox
*4 F4 Lookup
*5 HTML
*6 Text just displayed
*7 Date
*8 Link
*9 Time
* Data type
*1 String
*2 Numeric
*3 Date
*4 Time
%>
<%---------------- TableControl display in the popupwindow --------------------------%>
<mdm:tableControl table="<%=controller->r_asset_data->t_maintain%>"
id="tv1"
width="650"
no_buttons = "X"
height="330"
columns="<%=lt_columns%>"
dropdowns= "<%= lt_drop %>"
title="Maintain Asset" >
</mdm:tableControl>
</htmlb:gridLayoutCell>
</htmlb:gridLayout>
<input type="hidden" name="renderedtv1" value= "rendered-tv1" />
<%---------------- Confirm Button-------------------------------- --%>
<htmlb:button id="con"
design="STANDARD"
width="15"
text = "Confirm" onClick="confirm"
onClientClick = "self.close()"/>
<%---------------- Cancel Button-------------------------------- --%>
<htmlb:button id="cancel"
design="STANDARD"
width="15"
text = "Cancel"
onClientClick = "self.close()"/>
</htmlb:groupBody>
</htmlb:group>
</htmlb:form>
</htmlb:page>
</htmlb:content>
<%--********************End of changes mod-001 on 20/07/2007 *****************--%>
Message was edited by:
Durairaj Athavan Raja
--formattingHi Mohan,
Please use the formatting options to format ur question...!!
Thanks,
Tatvagna. -
Stats from the Intel AppUp Center Are Not Showing in the Reports
I have tons of downloads and purchases for my app, and it is listed on both the Adobe Marketplace and the Intel AppUp center. The reports show what I assume to be accurate numbers for the Marketplace, but show 0's for all Intell AppUp stats.
I have twice purchased my app from the Intel AppUp store and have given it 1 week to show up, but nothing is there. Is there something wrong with the reporting mechanism for AppUp?Currently the download numbers from Intel AppUp are not getting displayed on InMarket Portal. We are working on the fix, I will update you as soon as the fix is applied.
-
TopLink cached object changed are not commited to the database
Hello,
I'm using TopLink 10 and I have a writing issue with a use case:
1. I read an obect using TopLink that is in the IdentityMap
2. Using JSF this object is edited throught a web form.
3. I give the modified object to the data layer and try to modify inside a unit of work:
UnitOfWork uow = session.acquireUnitOfWork();
//laspEtapeDef comes from JSF and has been modfied previously
LaspEtapeDef laspEtapeDefClone = uow.readObject( laspEtapeDef );
//I update the clone field
laspEtapeDefClone.setDescription(laspEtapeDef.getDescription());
uow.commit();4. I use again the same object to display it once modified.
The object is modified in the cache but the modified fields are never commited to the database. This code works only if I disable the cache.
So, I've modified my JSF form to send the fields instead of modifying directly the object.
My question: Is there a way to commit changes mades in an cached object?
I've found the following section in the documentation, that explain the problem but doesn't gives the solution:
http://docs.oracle.com/cd/E14571_01/web.1111/b32441/uowadv.htm#CACGDJJH
Any idea?How are you reading in the object initially? The problem is likely that you are modifying an object from the session cache. When you then read in the object from the uow, it uses the object in the session cache as the back up. So there will not appear to be any changes to persist to the database.
You will need to make a copy of the object for modification, or use the copy from the unitofwork to make the changes instead of working directly on the object in the session. Disabling the cache means there is no copy in the session cache to use as a back up, so the uow read has to build an object from the database.
Best Regards,
Chris -
Reg: 0COUNTRY and 0REGION are not displaying in the report
Dear SDNERS,
I am facing a problem in CRM Report " 0CRM_C04_Q003" I am not able to get the 0COUNTRY & 0REGION data in the reports it is showing # Not Assigned.
When I check the 0REGION & 0COUNTRY it is having data in it in the info objects.
I come to know that both the objects are navigational attributes of "0CRM_PROSPE" info object in the report and this info object does not have any data in it as it is having a referece char of 0BPARTNER.
0BPARTNER is not showing the data for 0COUNTRY AND 0REGION. pleaes advice how to get this in CRM report.
Points will be assigned for a quick response.
Regards,
Prasad.Hi,
0COUNTRY and 0REGION as you said are Nav Att of 0CRM_PROSPE Master data.
If Master data object itself is not having data then it would not be possible for you to get data for these objects.
You can include these two objects in your InfoProvider and add in your Query as normal InfoObjects instead of Nav att.
Note: The two Infoobjects should be mapped with the appropriate source fields in the transformation and data load should be successful.
Hope this would resolve your issue.
Regards,
Geeta -
Changes are not reflecting in the page
Hi All,
I have an issue in custom page. In my custom page, if i click approve button for a particular batch, then it will navigate to previous page which contains 10 batches per page in the table structure.
Once i clicked the Approve button it will update the status in the table. It is getting updated in the table but it is not reflecting on the Batches page while navigating to previous page.
Kindly share your suggestions.
Thanks and Regards,
MyvizhiHi Myvizhi ,
Since you wish to display a specific row in the table region , then while navigating from update page to search page send primary key and set it as
where clause , so that you can view only updated specific row .
You need to handle this in process Request of your controller class in search page . Let me know if its not clear .
--Keerthi -
SOD's are not shown in the Report
We have created the connector in Compliance Calibrator for MQA system
We ran the user Full Synch and Incremental Synch.
But the Sod Report doesn't show any SOD's.
SOD's are shown for the different system's the user has same Roles in
the two systems.
Is something we are missing?Venkat,
You need to run 1) Full User Sync, 2) Full Role Sync, 3) Full Profile sync if you are using profiles, 4) Full Risk Analysis and 5) Management Reports to see SoD violations.
I did not understand meaning of this statmenet:
"SOD's are shown for the different system's the user has same Roles in the two systems."
What do you mean by this?
Regards,
Alpesh -
Changes are not applied when exporting to plugin
When I make changes to an image in Aperture (e.g. white balance) and then go to an editing plugin (Viveza, Dodge and burn,…) Aperture hands over the unedited file to the plugin. Can I change this beahiour or force Aperture to apply edits before editing with a plugin?
David,
This isn't normal behaviour at all. Are you sure you have the edited file selected when you choose to export to a plugin? For instance if Aperture is set to create a new version with each edit it'll create a stack containing all versions - if you then chose the stack when you export you could be selecting a pick that doesn't reflect your latest edits...
This is all I can think of at the moment. I've never seen that bug before. Aperture bakes in all of a selection's edits to either a tiff or psd file when choosing any plugin. You can't select to do otherwise.
There are exceptions with external applications when doing multiple passes, but that's an entirely different problem.
Maybe you are looking for
-
Importing from iMovie 08 to FCE4 - aspect ratio!!
Hello All, I have clips recorded in iMovie 08 (captured from built-in iSight cam) which I'm trying to import into FCE4. Using the standard FCP XML export in iMovie and opening in FCE4, the aspect ratio of all clips is lost. I am using the built-in iS
-
HP Officejet Pro 8500A Plus e-All-in-One Printer - A910g cm756a geeft fout melding
komt fout melding (pompmotor afgeslagen druk op ok ) ok druken helpt niet alstub. help me
-
Which 500GB to 1TB hard drive for hdd upgrade?
My hard drive is failing on my Macbook Pro so I was going to buy a new drive, I thought I could just get any 2.5" SATA disk again but from reading through the the forum, it looks like there issues with certain drives, motion detection issues, etc. I'
-
How can i download itunes on my computer with it changing all my icons to itunes?
-
Hi, I have two questions about this chart. I am using sqldeveloper 3.2.0.9 The one axis is obviously time, but what is the veritical axis? Is there a way to save and/or publish this graph? Thank you