SOD's are not shown in the Report

We have created the connector in Compliance Calibrator for MQA system
We ran the user Full Synch and Incremental Synch.
But the Sod Report doesn't show any SOD's.
SOD's are shown for the different system's the user has same Roles in
the two systems.
Is something we are missing?

Venkat,
You need to run 1) Full User Sync, 2) Full Role Sync, 3) Full Profile sync if you are using profiles, 4) Full Risk Analysis and 5) Management Reports to see SoD violations.
I did not understand meaning of this statmenet:
"SOD's are shown for the different system's the user has same Roles in the two systems."
What do you mean by this?
Regards,
Alpesh

Similar Messages

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio Cesar

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

Data Migration Opening Balances are not updating in the Report F.08

Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
Kishore

Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore

Workflows are not shown in the OAM aplications front end but exists in LDAP

Hi
In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
due to this not there in production, when i tried to create a user, it says i donot have access rights.
When i try to create and add workflows in the LDAP, the server rejects with the following error:
Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
the entry is : last line shows obwfstatus as deleted ...
dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
obwfstatus;vdcsn-5038aa2900000001000d;deleted:

Edit the targetNamespace to any name less than 60 chars and they try again
Regards,
Prateek

Ios 5.1: my calendar dates are not shown in the notification center

My calendar dates (from today and tomorrow) are not shown in the notification center. Under notifications I have activated the calendar app. What can Ido?

IOS / is no out for a couple of weeks and Apple seems to be reluctant to fix this problem. As a business device it becomes rediculous to be not able to see my calender entries anymore in the notification center. Is Apple now leaving the business arena and focusing on toys ?

Ratings and picks are not shown in the pictures in the filmstrip, although marked in the LR presets. Who can help?

ratings and picks are not shown in the pictures in the filmstrip, although marked in the LR presets. Who can help?

found the solution: the filmstrip was to small !!!

Dear Apple community, some purchased songs from iTunes store are not shown in the album, how can I download them?

Dear Apple community, some purchased songs from iTunes store are not shown in the album, how can I download them?
I already looked through this: http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US
However my itunes does not display the 'library' icon. Some help would be greately appreciated!
Cheers!
Andy

Hello
In itunes...preferences you can change the setting to import songs instead of mp4 to mp3. Afer changing this setting, right click to the songs and than you are able to convert to mp3. ths's it

Changes are not applying to the reports

hi all
i have moved the RPD and catalog file to UAT there i got few changes
i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
so i again i copied same RPD and catalog to UAT now it is working fine,
why the changes are not applied to the reports that i have moved to UAT
is it mandatory to move RPD and catalog to the other environment ??
Thanks

Hi,
if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
If not you need to deploy RPD and catalog into UAT.
By,
KK

Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column. Now in V 5.0.5 page elements are not shown, just the page title, and under that about:blank. Suggestions? Thanks.

Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column . Now in V 5.0.5 page elements are not shown, just the page title, and under that "about:blank". Also, the activity window used to show sequential activity and now each new page replaces the last. Thanks for any suggestions re how to restore previous activity window function.

Not all YouTube videos are available for downloading, but:
There is the Free iTube Grabber which can capture almost any audio and/or video stream (it says here) but only works with Intel Macs.
http://itube-grabber.en.softonic.com/mac
Firefox Download Helper is also supposed to work, you have to be logged into YouTube first.
and the RealPlayer Downloader that comes with RealPlayer SP for Mac from:
http://www.real.com/realplayer/mac
which also downloads videos from YouTube.
There is also iTubeX which allows you to download videos (Flash, HTML5 and others), .mp3 and .swf files from almost every website as easily as possible:
http://www.macupdate.com/info.php/id/27604/itubex
Lastly: How to download Flash videos and play them in Quicktime using Perian is explained here:
http://perian.org/#watch
It's the video at the bottom of the page.

Barcodes are not shown in the client machine

Hi,
We are using asp.net web forms for launching crystal reports. Crystal Reports rpt with barcode has been designed in Crystal 2008. Barcode field has been defined by right clicking the required field and selecting Change to Barcode u2026 and the barcode type is selected.
Barcode is shown when we launch the report in the web server. When we launch the same report in the client machine barcode is not shown to the user. The barcode font u201CCode39AzaleaWide2u201D is not available in the client machine.
How to overcome this issue without installing the font manually in each client machines. Crystal Reports 2008 is installed in the web server.
I need some clarifications
1. Whether the barcode fonts should be installed (mandatory) in the client machines.
2. On launching the report whether the barcode fonts will be downloaded from the web server to the client machine
3. Are the barcode fonts are freely distributable to all the client machines both internet and intranet users
4. Is there any document available regarding this issue

Hi,
Please check [KB1588027|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533383338333033323337%7D.do] for the answers.
It is your call on how to distribute the fonts. Reports will not download the fonts on it's own.
Thanks,
Saurabh

Measure Values are not shown in the pivot tables

Measures without aggregation (in rpd) are not shown in pivot table.
Im trying to add multiple columns in the fact table as measures,one which is summable had has the SUM function and three which are not summable.
The initial report will be as follows and I have been able to get the data displayed.
Year | Month| Company Name| SUM(C1)| C2|C3
However if I pivot the table as follows data in column C2 and C3 are not Displayed.
Columns
     Year
          Month
          Company
Rows
Measure Lablel
Measures
     SUM(C1)
               C2
               C3
Should we have an aggregation rule applued in C2 and C3 ?

Yes, all the column entries must have agg rule. You can specify one such as 'first' in the pivot table.

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Under "CLIP" all featured options are grade out. Please Help!!! Also the blade and blade all are not shown in the tool bar...

Hello People. I just reinstalled my sound track pro which took me forever, dah . And now I'm having difficulties with using some options that are listed under the "Clip" they simply all grade out. Also some tools such as blade and blade all are not listed in the tool panel. Please help me people. Thank you all.

People, never mind about the Blade Tool I found answer on the community board. Thank you. But still looking for grade out issue.

SOD's are not shown in the Report

Similar Messages

Maybe you are looking for