Changes in production in process chain

Hi sdn
when I 'm making changes in the production to the process chain, the changes are done but when I'm activating it ,it is saying changes can not allowed invalid call sequence action cancelled
rubane

Hi,
Can you please follow the below steps:
Go to RSA1 -> Transport Connection --> Object Changeability
Each Object Type has 3 states:-
1) Not Changable
2) Changable Original
3) Every thing Changable
1) Not Changeable does not allow you to change an object (local or transported).
2) Changable Original allows you to create objects as well as to change those in the originating system.
3) Every thing changable allows you to change the transported objects as well in addition to the locally created objects.
What I suspect is Object Type RSPC (and RSPT) has been set to Not Changeable / Changeable Original in the Production system.
In that case, simply right click on the Object Type RSPC (and RSPT) -> Select Everything changeable.
This should allow you to activate the changes in the Process Chains.
Thanks,
Subhajit.

Similar Messages

How to get the name of user who last changed the settings of process chain

Hi All,
I have a process chain which runs daily. At one atep it would load data till PSA then there was a separate process to update data from PSA. But recently someone changed the settings and data is loaded in PSA and data target in parallel. But the process update data from PSA is also there still and as a result giving error as data already reached infocube. I wish to know who changed the settings. I searched and found about tcode SGL1 but not getting any fruitful result. Can anyone pls suggest anything.
Thanks in advance,
Sananda

Hi There,
In your case, nobody has changed the settings in process chains. However, it appears that someone has changed the Processing mode in the Info package. Since now the infopackage has already run after the change was made, I don't think there is any way to find who has changed the setting in the infopackage.
However, the solution would be to just switch back the processing mode from "PSA and Data Targets in Parallel" to "Only PSA".
Regards,
Hemant Khemani

Why can't we change and activate a process chain while it is running?

why can't we change and activate a process chain while it is running?

Hi.........
Yes u can activate the changed PC...............but don't schedule it...........
If u schedule the Chain............when the current chain is running..............it will get stucked in the process..............which was executing ........at the time when it was scheduled.............
I thnk u hav made some chainges in the PC in Planning mode.............right...............Activate it............after the completion of the current run of the chain............schedule the chain........
Regards,
Debjani.........

How to change source system in process chain

Hi All,
In our Bw quality system, process chain is pointing to the Production system ,
I want to keep the process variant name same as production but want to change the source system
For example.. let us say currently process chains(All DTPs) are pointing to the Production server (PD001) ip (200.12.23.22)
now i want to keep the Server name same but want to point it to the quality system..so after change Process chain will show same name but it should point out to quality system.(let us say bwq 200.12.23.232).
Can you please help me on this

Hi Pravender,
In our BW system , we have same process chain in all the system (Dev, Quality and production)..and naming convention is also same ..(all process chain points to Production system only)..
So when I want to load data from development i just need to change the source system ip adrress to the Development Server (So names in process chain will indicate production but it will point to the development server), .
I want to know how can i change the source system mapping.
Hope i am clear now

Changes in production order/Process order

Hi Experts,
Very much hopeful that I will get solutuion of below:
How or where to see changes done in production / process order.
e.g Suppose I have created one production order. Then release it in CO02. Then I changed order quantity from 100 to 200 ( Earlier it was 100 ). Then I delete one BOM component from order. Then I changed finish date of order.
Pls tell me how to track these changes. What configuration need to track these changes. Please tell me step by step procedure.
I have read related thread in sdn itself but not satisfied.
Please help.
Regards,
Vipul

Hi,
For tracking in changes of Production / Process Order, you need to activate Order Change Management (OCM). After activating the same, you can view changes of Production order in CO02 / CO03.
for more details of OCM go through following link :
[Order Change Management (OCM)|http://help.sap.com/saphelp_erp60_sp/helpdata/en/a5/63198843a211d189410000e829fbbd/frameset.htm]
Hope this helps.
Regards,
Tejas

Change run error in Process Chain

Hi,
I got an error in running the change run step in the process chain.
The error is "The action is locked by a change run".
Could this mean that the change run was running when this step in the process chain was invoked.
I have a process chain with multiple(4) parallel processes and I would like to know from you gurus the best way to model such a process chain. Should I keep just one attribute change run at the end of the complete process chain or should I let the change run after every PC (each of the 4).
Any inputs will be appreciated
Thanks & Regards
Sid

Siddhartha,
Exactly, you need to keep the change run process at the end of the PC. no need to run the change run for every master data flow.
check whether change run is running? check in RS12 for locked entries.
All the best.
Regards,
Nagesh Ganisetti.

Change in Production order/ process order

Can anyone tell me where are the changes being stored for the Production order/ process order? I mean in what table?
Regards,
Subhasish

Hey,
Any change made to the order data is logged using change documents. These changes are recorded in the tables CDHDR and CDPOS. The change document object for orders is ORDER.
For information on change documents click this link
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa0175493111d182b70000e829fbfe/content.htm">Overview</a>
To read the change documents use functions CHANGEDOCUMENT_READ_HEADERS and CHANGEDOCUMENT_READ_POSITIONS.
You can find the change document objects using transaction SCD0.
-Kiran

Data Change in the Infoprovider-Process Chain

Hello Friends,
I want to broadcast the Queries and Workbooks periodically.I want to automate the process.For this i came to know that we have to select the EXECUTION WITH DATA CHANGE IN THE INFOPROVIDER TRIGGERED BY A PROCESS button.Can u please guide me how to do it successfully.
Thanks
Mohan Chand Reddy A

Hi Mohan,
You can achieve this using process type in Process chain creation.
In the below links you will find step by step procedure to create this in process chain
http://help.sap.com/saphelp_nw70/helpdata/en/ec/0d0e405c538f5ce10000000a155106/frameset.htm
http://www.tli-usa.com/download/Taking_Charge_of_Information_Broadcasting_in_BI_7%5B1%5D.0_for_improved_report_and_data_distribution.pdf
Regards,
Venkatesh

Attribute change run Failing in Process Chain

Hi guys,
Every day my process chains is failing due to Attribute change run and I am maually running attribute change run.
And one more thing when the attr. change run is triggered automatically,then it is generating 2 change counters in RSATTR tcode instead of 1.
One is successfully completes and one is still in schedule.After 2days days it is showing like completed change count id.
Please help me.
Regards,
Tiragati.

Hi,
As you said Attribute change run step is failing every day.
can you post the error message. is it failing because of Lock issue or some other issue.
Mostly attribute change runs fails with lock issues. if its the same problem in your case. make sure that no master data objects runs at the time attribute change run runs.
Try to put some delay in the process of the Attribute change run so that it will not get failed.
Check if its the same ACR scheduled or diff objects?
Regards
KP

Urgent:changing the Directory of process chains

HI SAP GURUS,
I actually created some process chains in the notassigned nodes ,i want to assign them another directory in which all my other process chains.Can any body help me to sort this.Its very urgent
thanks in advance
Message was edited by:
narendra kumar ragulakollu

hi Narendra,
try RSPC->choose your process chain, go to menu process chain-attributes-display component (shift+F11)-> a small screen 'assign display grouping will come out', choose the 'directory' you want. save the process chain and 'refresh'.
hope this helps.

Issue in process chain with DTP after imported to production

Hi,
we have a issue with process chain.
after transportation DTP technical name is differ in prod and dev. process chain is went inactive.
i have read some related threads, i'm not find any suitable solution for this.
we don't have access to change process chain(they are not willing to open prod system)
could you please provide solution on this issue .
Thanks,
EDK....
Edited by: EdK666 on Oct 21, 2011 2:54 PM

Hi,
I have observed the behavior of changing technical name for DTP but still I think your process chain should not become inactive due to this. I think process chain somehow adjust the new technical name but anyways you should be able to change the DTP in process chain directly in production system.
If that is not possible you can just try re-transporting it.
Regards,
Durgesh.

Process chains Server changes

Hi,
Guys this is basis question but If you have ideas to change server information for Process chains.We are having problems running process chains.Its showing old server info we have done refresh few days back.Need to change server info for all the chains in Mass not one by one its hectic process...
Please advise if anyone came across similar kinda problems..
Regards,
Andy

Hi Srikar,
RSTPRFC creates a destination into the BW-standard-client with the BW-Background user (usually called BWREMOTE or ALEREMOTE).
This destination then is used to activate the chain in the BW-standard client remotely from the client 000.
Please refer to SAP Note 659160 for further details.
Hope this helps,
Colum

Attribute Change Run Process chain

Hi,
We have a attribute change run step in Process chain with "selective infoobjects".
But when it executes it runs attribute change run for all infoobjects apart from what i have mentioned in the variant.
Proof:
I had a snapshot of infoobject list in RSA1->Tools->Attribute change Run before executing process chain in which i saw info objects other than what i had in the variant.
I ran the process chain.
Again I saw the infoobject list RSA1->Tools->Attribute change Run and it was empty!!
Even though I mention some infoobject in process "Attribute change Run" It runs for all info objects irrespective of what I maintain in the variant.
This causes problem and creacting lock. If anyone ever observed this problem and resolved please let me know!!
Thanks
VJ

well here is the POC ,I have nw204s SP-12 .
Steps followed -
Monitor of change run - 3 infoobjects currently waiting for CR.
Built PC with Process type "Attribute Change" only ..no other process types barring "Start" which is imperative.
Included only 2 Infoobjects from the 3 aforementioned.
Scheduled as immediate and it executed CR for the 2 only,so my CR monitor shows now 1 pending for CR to be run,which is as expected.
So as per Proof of Concept sp-12 works with process type "Attribute Change"
You may wish to check your process chain again and in worst case raise an OSS to SAP.
Hope it Helps
Chetan
@CP..

Process Chains and Process Types for ODS Change logs

We have created and used process chains to manage a large amount of our batch processing. I am looking to convert our batch process of deleting data from ODS change logs into a process chain. I have been unable to find a process type that will allow us to do this.
Any thoughts?

Hi Lisa,
You can use Process "Deleting Requests from the PSA" for deleting PSA and change log data.
Since the change log is also stored as a PSA table, you can also use this function to delete change log
records. You can find additional information under Deleting from the Change Log.
More info:
Deleting Requests from the PSA
http://help.sap.com/saphelp_nw04/helpdata/en/b0/078f3b0e8d4762e10000000a11402f/content.htm
Deleting from the Change Log
http://help.sap.com/saphelp_nw04/helpdata/en/6d/1fd53be617d524e10000000a11402f/content.htm
Hope it Helps
Srini

How to close an open request for a RealTime Cube in a Process Chain ?

Hi,
I've a real-time infocube, let´s call it C1RT. C1RT is connected to another standard Infocube C2 via a DTP.
The users enter the planning data; it's stored on C1RT. I wan't a process chain that loads data from C1RT to C2.
What I've done yet and doesn't work is:
Process chain PC1:
Start->Change load mode from input ready to load ready for C1RT->Run DTP.
I need to go to C1RT, right click, manage, click on the yellow ligth of the open request, and chage it to green, after this DTP transfers the data succesfully.
I want to automate the yellow to green issue in PC1.
Any ideas ?
Best Regards,
Miguel P.

Hi,
no report necessary.
I had a similar problem lately.
changing the cube in process chain is enough, but there are some settings to be made for the cube.
Look it up at OSS note 1063466 .
regards
Cornelia

Changes in production in process chain

Similar Messages

Maybe you are looking for