Changes in RPCBURZ0 causes errors in other programs
Hello to All,
I made changes to RPCBURZ0 in order to extend the TABLE schema function to read a custom Infotype 9001.
I added the necessary code in RPCBURZ0 and the data definition in RPCFDCZ0.
The code is working perfectly , but the changes are causing errors in other country specific reports
specifically in : HINCALC0 , HCNCALC0 , and HKRCALC0 and Transports to Quality generating errors.
Error is because the custom infotype definition is not seen in these reports.
Generation of the users of the transported Includes |
Program HCNCALC0, Include RPCBURZ0: Syntax error in line 000021
The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Program HINCALC0, Include RPCBURZ0: Syntax error in line 000021
The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Program HKRCALC0, Include RPCBURZ0: Syntax error in line 000021
| The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Looking at other H--CALC0 reports i could easily spot an include for RPCFDCZ0.
include rpcfdcz0. "customer-specific data declaration (int'l)
I wonder why this include is not in (HINCALC0 , HCNCALC0 , and HKRCALC0) !!!
I have two solutions in mind :
1. Make a custom ZRPCBURZ0 and include it in the main report.
2. Look for user exist for the three reports and add the data definition statement .
What is the best way to fix this situation ? and is there any other possible solutions ?
We are using :
SAP ECC 6.0
Payroll International Driver.
Alex Gorly and Matt Sullivan solved one of my issues above:
Message: Attribute 'prod' is not declared for element 'prodname'
I'm still stumpled on the other one:
Message: Not enough elements to match content model '(prodname,vrmlist,((brand|component|featnum|platform|prognum|series) )*)'
As stated above, I've even removed everything from the general rule of <prodinfo> except prodname and I'm still getting the same error. I've searched everywhere for this general rule and <prodinfo> is the only place I can find it.
What I really want is: (prodname), (vrmlist)?, (brand | component | featnum | platform | prognum | series)*
so that vrmlist is optional.
No matter what I do, unless I include a vrmlist, I get the above message. Currently, our CMS can't handle vrmlist but I don't want to remove it altogether because we may be replacing our CMS.
Help please!
Similar Messages
-
Can you change the frequenices settings on the time capsule and the mac pro to receive it? Because it is causing errors with other wireless cameras that cannot be changed.
Its ok. Thank you for replying. I meant router. lol. I have another question... I have looked at the back to my mac... so you are saying if I travel and take my mac book and use back to my mac I can access it?????
Well here is the issue, as I said, my husband is deployed and he is the one that will be trying to access it. I have the mac book here with me. He has an iphone,ipad, and a windows based laptop with him... Is there a way for him to access it with these devices, to include the windows laptop?
If all of this works can I load pics and movies on it and him be able to access them and then watch the movies?
I appreciate your help. I am not a ******* but I just need help.
Thanks so much!!! -
Changes to Jpeg not Showing in other programs
I made changes to a JPEG using bridge and the raw filter and notice it does not show those changes in other programs. I usually use DNG's and notice that other programs show the image correctly modified, I think there is a new thumbanil embedded. Do changes I make in Bridge using the Camera Raw Function only show in Bridge? Is there a workaround, or a way to show the changed version? I have a ton of JPEGs lately that I noticed show no changes.
Well, that isn't what I do. I guess we all have to develop a workflow that works for us. I treat the downloaded JPEG files as "master" files. I do the adjustments in ACR because, as you say, it's always possible to go back to the original image. So my workflow involves saving copies of the images (not overwriting the original images) in a separate subfolder. Yes, that involves more disk space, but that is how I prefer to work.
If you are not familiar with Dr. Brown, then you have a real treat in store for you. He is kind of crazy, in a good sort of way. And he has a lot of excellent tutorials and some free Photoshop add-ons. Here is the link to his website:
Russell Brown Show
Just click on "Photo Tips and Techniques". -
Bica: change the query cause error in the pas model
Dear friends,
We have very simple scenario: one query 'SSM_SQL_KPI_MAY'' for feeding the pas model- 2 demensions and 2 measures. With this query I load the schema and data to the pas model.Everithing was fine. After that we added new dimension to the query.Ichanged the existing query and load the data with bica.But when I try to open the model I get the next error every time
DAT316:
No internal Dimenson unique name to position cache exists for 'EZOR_KEY' on Linkid 'BI' Cube 'SSMKPI/SSM_SQL_KPI_MAY'
We try to resolve the issue by deleting data and schema but every time I get the same error.
How is it possible to resolve this issue?
What is a best practice in the case of changing queries working with bica?
Thanks.
Best regards,Orit.Dear Orit,
Keep in mind that dimensions provided by a BICA query connection must have a HIERARCHY associated to the base characteristic in BW. PAS uses this hierarchy to define the "Result" (rollup) levels of the dimension. Check your BW query and verifiy that all the included dimensions have associated hierarchies in use. I'm guessing this is the issue with your new dimension.
You can also check the dimensions in PAS by selecting your model, then "Dimensions" and right-clicking on the affected dimension name and then the "View" option (or "List" or something related to displaying the dimension definition). You should see a PAS script that describes the dimension, including the dimension member IDs, descriptions and rollup levels. This should be consistent with your query results and hierarchies).
Also, from the same menú you may also choose to "Delete" a dimension.
Good luck!
Regards -
Modules with Halo Theme causes errors in other modules with Spark theme
Hi,
We have a large application which calls several modules, some old and some new.
Most modules and the main App are using only MX components and were styled based on default mx theme, thus we want to compile these modules with the flag to use the old Halo theme.
But when we did this our new module that contains spark components (Which isn't compiled with this flag) couldn't find the default skin for the spark components.
Using the -keep-all-type-selectors flag didn't work in this case.
Only when we removed the Halo theme flag from other modules and main app it worked.
Is there any other option?
Because using the old modules with spark theme causes major change in the appearance of our application.
Thanks,
Dafna.I think if you mix themes you'll need to specify more styles on the
non-default theme because the set of globals and other defaults will be
different. -
''dupe of https://support.mozilla.org/en-US/questions/928117''
all website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not helping in any waysA possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router. -
Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?
Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton -
[solved] Some programs cause problems for sound in other programs.
Today I noticed that audio has stopped working in some applications, but not others. The programs that I know where it doesn't work are:
Hotline Miami (game)
VLC
Dungeons of Dredmor (game)
Uplink (game)
Programs where I know it works are:
mplayer / smplayer (on the same files where vlc does not work)
mpd
Programs run through wine
Standalone flash player and the firefox flash plugin
Additionally, when I run a program where audio doesn't work, I have to restart programs where it does. For example, I'll pause mpd, open Hotline Miami, and then quit. When I try to unpause mpd, I'll get the error message "Failed to open audio output". But if I try a couple times, it will eventually resume. It's a similar situation for mplayer. I'll have to quit and restart mplayer a couple times after trying one of the other programs before audio will work.
Further complicating the matter is that there are no error messages for the programs where audio does not work. I can't seem to track down the problem. I also don't do much with sound beyond using mpd and mplayer, so I don't know when this started.
My hardware is a Lenovo IdeaPad z580 with integrated Intel HDA audio.
EDIT: I just noticed that the problem is not what I thought. Part of the problem was simply due to volume. So I can get sound in the listed programs. However, running those programs does still cause the problem for the mplayer and mpd where I have to restart them.
Last edited by mathfreak (2014-03-10 13:27:10)Gah. It does appear to have been a pulseaudio thing. I hadn't even realized it was installed, let alone running. I've fixed it. Thanks for the help! And thanks, brebs, for the asoundrc file. I think it'll help a lot.
-
Could not save changes to this script because of a program error. -2706
OK, this is very odd! Please try the following and let me know your results:
1) Create a new script with the following example code:
set testList to {}
repeat with i from 1 to 8145
copy i to end of testList
end repeat
2) Save the script as an Application (name it whatever you like).
3) Launch the newly created Application and see if you get the same error message I am getting...
*Could not save changes to this script because of a program error.*
-2706
If you replace the number 8145 with 8144 (or any number less than 8145) the script runs without error. Any number greater than 8144 returns the error message shown above. Maybe there's a reason for this that I'm overlooking or is this another bug?
I looked up error code -2706 ([HERE|http://developer.apple.com/Mac/library/documentation/AppleScript/Concept ual/AppleScriptLangGuide/reference/ASLRerrorcodes.html]) which says it is a "*Stack overflow.*"
Thanx in advance for any insight on this!!
NOTE:
The only workaround I've found for this is to make sure the script resets the variable before it quits. Like this:
set testList to {}
repeat with i from 1 to 8145
copy i to end of testList
end repeat
set testList to ""Hey Pierre, thanx for taking the time to scratch your head with me!
Very odd indeed.
Glad it's not just me that thinks this!
I've also noticed that the problem occurs even when you try to save the script as a compiled script. That's possible as long as you haven't run the script. Once you have run it, trying to save it seems impossible. You get the message: *“The document “Document title” could not be saved.”*
I've noticed the same thing as you and have experienced this extra error several times while trouble shooting this problem!
On the other hand, is there any good reason for which you would want to save such a big list? Are there any drawbacks to the workaround you've found?
I don't want to save ANY variable EVER unless I explicitly tell my script to do so! This variable is not a property, so why would my script want to save it? I haven't noticed any drawbacks to the workaround. Setting the list variable to "" or {} (or ANYthing with under 8145 items) seems to work fine. I just find it weird that my script can't "*save changes to itself*"?! What is there to save? It's just a variable that should release after my script has run ...unless I'm completely misunderstanding how variables work after ALL these years of scripting.
Btw, the following version of the script (as you probably already know) is much faster, although it doesn't change anything to the result:
*set testList to {}*
*set testListRef to a reference to testList*
*repeat with i from 1 to 8144*
*copy i to end of testListRef*
*end repeat*
Yeah, it definitely runs much faster this way! I just posted a quick example that would illustrate the 8144 list count limit. My script sets a variable to a list of numbers contained in a text file. This list is almost always rather large! Right now there are over 20,000 items in this list of numbers.
Again, thanx for your time my friend!! -
On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?
Start up in Safe Mode.
http://support.apple.com/kb/PH4373 -
I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
the credit card info on the account has changed but for some reason there is no option for me to make the changes. In addition, cloud has stopped working and all other programs that need to be updated cannot be??
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html -
All of a sudden I can't access my iPhoto files from any other programs (ie Photoshop, facebook etc.). It just gives me this message below. What the **** changed? This wasn't happening yesterday.
1 - close iPhoto.
2 - go to your Pictures folder and open the iPhoto Library package as shown below:
3 - locate a file named AlbumData.xml and move it to the Desktop.
4 - launch iPhoto.
5 - relaunch the other programs and try the media browser again.
OT -
Every time I start my computer, photoshop tries to open. I would like to stop it from trying to open without my prompting it to do so. It is causing a real stall when I am trying to start other programs when it does try and start remotely. How can I prevent this from happening? TY
Take a look at this link: http://www.maclife.com/article/howtos/how_stop_programs_automatically_opening_when_you_sta rt_your_mac
Benjamin -
TS1963 indesign cs4 is giving me an error 5 after i migrated all the other programs adobe suite cs4.
indesign cs4 is giving me an error 5 after i migrated all the other programs adobe suite cs4. i migrated from a powerpc g5 to a new mac mini 10.8.2. the other programs to be fine but i have lost all my brush sets from photo shop, anybody know how i can reclaim them? trying to get used to the new interface. and i would like the programs/icons to open with a double click instead of using the command O combo. thanks
paulPossible clues...
http://www.graphicdesignforum.com/forum/showthread.php?t=54463
Maybe you are looking for
-
The touch part of my iTouch doesn't work how do i get that fixed?
My itouch touch screen doesnt work anymore. I have restored it and put the new software on it but it doesn't work I want to know how to get that fixed or if i should just by a new ipod.
-
Any way to bypass iPhone backup so I can upgrade to 2.1?
I'm really looking forward to upgrading my iPhone to 2.1, but in order to upgrade it has to backup the iPhone first. It's been running for an hour now and the progress bar has barely moved! At this pace it'll take at least 10 hours to backup! And if
-
I only see three options for bookmarks: alphabetical, reversed alphabetical or unsorted. On this shared computer marking subfolders is not an option. We would like to have the unsorted list reversed.
-
Hi everyone! This is my first question on the forum, so apologize if I'm asking something that has been asked a ton of times. I was however unable to find a similar thread. My problem is not whether or not I should buy a Retina Macbook Pro, but rathe
-
Role and responsibilities of an Xi consultant in realtime?
hi friends, plz tell me.. What r the role and responsibilities of an Xi consultant in realtime? thanks in Advance.