Changes in Standard Table

hi
    I want to change some fields in standard table like J_2IREGDOM.There it is asking access key but i have given my access key but getting an error like incorrect access key but it is correct one only. can anybody give the solution. Is there any other way to change the standard table?
Is there any other access key for changing standard table.
Regards
Rami Reddy

Hi,
  My sincere suggestion is dont change the standard table, instead you can create one custom table with your requirements. Any way if you want to make changes to standard table then you need to ask you basis guy about the object access key, the object access key for 'R3TR' 'TABL' <your table name>. Provide this object key to your basis person and ask for object access key.
Rgds,
Bujji

Similar Messages

  • Changing field length of a standard field in standard table VBEP

    Hi,
    Please advice the possibility and the possible repercussions of changing field lengths in a standard table. Table in concern is VBEP.
    Thanks & Rgds,
    Pradeep

    No you cannot change the field length
    thanks
    G. Lakshmipathi

  • How to change the lenth of existing field in sap standard table

    Hi all,
    can anybody help,my requirement is, how to change the length of existing field in sap standard table....
    thanks in advance..

    Which field are you thinking of in particular?  Are you wanting to increase or decrease the length?
    Some fields are used so extensively that a change to their length will mean adjusting many tables, some of them potentially very large, and hence taking a long time to adjust.
    Some standard SAP programs expect certain fields to be of specific lengths and won't work if the length is changed.
    Some screens could cease to work.
    If you decrease length, then you could lose data.
    matt

  • How to change records in standard tables ?

    how to change records in standard tables ?

    HI,
    If you are asking from program..Then you can use BDC or BAPI to update the records in teh standard tables..
    OR
    use the corresponding tcode to update the record
    Thanks
    Naren

  • Problem in changing the internal table contents of a standard program

    Dear All,
    I am making changes to internal table LT_PPDIT of standard program SAPLHRPT in the user exit EXIT_SAPLACC4_001 while payroll posting to accounting with tcode PC00_M99_CIPE. But though the changed value of LT_PPDIT is visible within the exit still the value of LT_PPDIT when we come outside exit is the same as what was before entering exit.
    Please suggest is there any way of modifying internal table of a standard program in the user exit.
    Regards,
    Kanupriya

    Hi,
    I think the internal table is getting refreshed or something like that after the user exit.
    Try debugging after the user exit and put breakpoints at clear and modify statements.
    Then you ll find out where its regaining the oringinal value after getting changes.
    After locating that point try finding some enhancmenent point there and including your code so that your value of internal able gets modified.
    Regards,
    Subhashini

  • Change field value in standard table

    Hello Experts,
    Could you please guide me to change i.e update field CESS value in standard table j_1irg23d.
    Thanks and regards,
    Sirisha

    Hi sirisha,
    if you want to change the value in the CESS field of j_1irg23d table. ( sales tax )
    since it is a standard table dont try to do it using update ot modify statsments.. standard tables are updated using standard transaction and it is not advicable to change using abap statments..
    just try to find a bapi or field module to update that field in the j_1irg23d table.
    1) To find a bapi or function module just do a whereused list on the table name you may get some fms or bapi
    2) check the forum you may get some links on it..
    Regards
    Satish Boguda

  • Changing The record in a Standard Table

    Hi,
        I need to change the record which i had entered in the standard table.I can able to delete it by going in to the debugging mode but my question is how to change the record.
    Regards,
    Vijaya Lakshmi

    To update the data of any table, go to transaction SE16N, type u201C&SAP_EDITu201D. It will activate SAP editing function.
    Esle.
    Opern any record in SE16.Double click on the record so that all the fileds will be displayed in vertical format.
    start debugging by /H
    change the value of "code" to "DELE" and execute.
    Moreover if you want to do this in PROD environment, I would NOT use the SE16n way, due to dependencies, which can have unwanted effects (database inconsistencies). Although in this case (only Name of customer), it might not be as bad as it normally would be.

  • Info. / Doc. on Changes to Standard SAP Program, Tables, Fields in SAP 6.0

    We are in the process of upgrading our SAP from 4.6c to 6.0 and I am looking for a document or white paper that summarizes changes to Standard SAP Programs, Tables/Fields, Function Modules etc.. from what used to be in SAP 4.6c to what it is in SAP 6.0.  I am not sure if such a comprehensive document exists or is posted in the forum.
    Any help or information in this regard will be highly appreciated.
    Thanks
    ram

    Hi Ram,
    <<   We are in the process of doing our technical upgrade from SAP 4.6c to 6.0. I am looking for a white paper or documentation listing the changes made to the standard SAP Programs, Tables, Fields, Function Modules etc. from Rel. 4.6c to 6.0. >>
    Do you want to know what custom changes were done to SAP standard objects in your system or do you want to know what changes SAP did from 4.6c to ECC6.0.
    There is no white paper or documentation to find out custom changes made to SAP standard objects. but there were many tools in the market to find out and tell what changes were done to sap standard objects in your system.
    Your question seems ambiguous please clear it.
    Thanks,
    Kiran.

  • Creating a custom change document for a standard table field

    Hi
    Is it possible to create a change document for a field in a standard table?
    I have searched the forum and only found threads about creating change document to a custom table.
    Will the creation of change documents to a standard SAP table be a modification?
    Thanks.
    Regards
    Sowbhagya.L

    Yes it will be a modification on standard table, but you can always create change document for any field by assigning it to custom change object.
    Regards,
    Krishna.

  • Any standard table that keep tracks of changes in user attributes

    Hi,
    We have a HR system and we are tyring to find out a standard table that keep tracks of changes(when was it changed,who changed it,what has been changed) in user details like email,address etc.
    Plz let me know the solution
    Thanks
    Bala Duvvuri

    CDHDR
    CDPOS

  • Changing auth group of a SAP standard Table

    I was wondering if someone could advise what the implications are if I changed the auth group of a SAP standard table (PA0033). 
    Does it affect programs behind the scenes, support packs, upgrades?

    I am not aware of any reason why an authorization group on a SAP standard table should not be changed.
    I have also seen this done for specific infotypes without any problems.
    See the documentation on transaction SUCU and SE54, and SAP notes and some of the discussions here on them.
    Kind regards,
    Julius

  • How to change the standard Fields short description in KNVV table

    Hi All,
    Our system is recently upgraded from 4.7 to ECC 6. When we compared both versions we found the KNVV table fields descriptions are changed in 4.7(customer modifications done in 4.7) and same these customer modifications are not copied to ECC 6 from 4.7 version.
    So I tried to change the short description at domain level with the help of access key. But the description is not changed. Can you please let me know is there any procedure that how can we change the fields description for standard tables.
    KNVV table in 4.7                                                        ECC 6
    Fields                       Short Description                     Short Description
    1. KVGR1               Gen.Bus.Terms print                Customer group 1
    2. KVGR2               VAT on FOC                            Customer group 2
    3. KVGR3               Confirmation status                 Customer group 3
    4. KVGR4               Collect Billing                           Customer group 4
    5. KVGR5               SC Surchge Excl                    Customer group 5
    Regards,
    Jyothi CH.

    You need not use access key to change field labels
    Transaction CMOD -> Go to -> Text Enhancements -> Keyword -> Change.
    Here you can change all data element KNVGR1 to KVGR5

  • Need to create a Change document for tracking Purpose on standard table

    Hi Experts,
    I am updating a field in standard table so need to create a change document for tracking the changes being done on the field.
    I created the change Document with transaction SCDO but I am stuck at point - How to call that in the report program to enable the change document.
    Please advice.
    Thanks!!

    Hi
    U can assign your transaction to Z-report like this:
    PARAMETERS: TAB1 RADIOBUTTON GROUP R1 DEFAULT 'X',
                TAB2 RADIOBUTTON GROUP R1,
                TAB3 RADIOBUTTON GROUP R1.
    DATA: TABNAME TYPE TABNAME.
    START-OF-SELECTION.
      CASE 'X'.
        WHEN TAB1. TABNAME = 'BSID'.
        WHEN TAB2. TABNAME = 'BSAD'.
        WHEN TAB3. TABNAME = 'BKPF'.
      ENDCASE.
      CALL FUNCTION 'RS_TABLE_LIST_CREATE'
        EXPORTING
          TABLE_NAME               = TABNAME
    *   ACTION                   = 'ANZE'
    *   WITHOUT_SUBMIT           = ' '
    *   GENERATION_FORCED        =
    *   NEW_SEL                  =
    *   NO_STRUCTURE_CHECK       = ' '
    *   DATA_EXIT                = ' '
    * IMPORTING
    *   PROGNAME                 =
    * TABLES
    *   SELTAB                   =
       EXCEPTIONS
         TABLE_IS_STRUCTURE       = 1
         TABLE_NOT_EXISTS         = 2
         DB_NOT_EXISTS            = 3
         NO_PERMISSION            = 4
         NO_CHANGE_ALLOWED        = 5
         OTHERS                   = 6
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

  • Activating change documents for standard tables

    Hi all,
    Can someone please tell me how I can activate change documents for a standard table.
    I created a change document object in SCDO and included the standard table I am working with. This table does not have "LOG DATA CHANGES' enabled in its technical settings. I checked the data element of the field I am interested in and it has "Change Document" enabled.
    Is there any way to activate change documents for a std table without writing code to create change documents? 
    Thanks.

    Hi,
    Check this transaction SCU3, this is to activate the change logs for the tables.
    Regards,
    Satish

  • Can i change or modify or insert the data in standard tables

    hi gurus
    can i change /modify/insert the data in standard tables
    witout using module pools
    plz send the  progem lines also
    it ll be very helpful to me
    thank you
    kals.

    Hi Kalyan,
    It is not advisable to update standard tables directly or through your own module pool programs also.  The reasons are,
    1.  It is difficult to find out how many tables are updated through the transaction.  if we leave one table also as Mr.Andrew said data integrity will be lost.
    2.  Authorization objects and profiles will be totally bypassed if data is inserted through custom programs.
    3.  Complete data validation is not possible.  There are certain validations that are executed through code and appropriate errors and warnings are shown in the transactions.  If we insert data directly to the tables anything can be inserted into the table field violating all the validations unless we have field level check constraints on the tables at database level.
    4.  User Exits and BADIs that are implemented for specific business requirements and checks will not function on the data.
    5.  Update & Transaction locks will not work properly.
    Due to above reasons, definitely you should avoid updating standard tables directly.
    There are many tools such as LSMW Recordings, BDCs, BAPIs, IDOCs, Upload Interfaces available in SAP through which bulk data can be updated without using relevant transactions.
    You can collect data from end users in text or excel sheets or through custom programs in required format and upload at once through above mentioned tools.
    Regards,
    Hema

Maybe you are looking for

  • IPod Touch NOT recognized in iTunes : HELP NEEDED

    My Ipod Touch is NOT being recognized by itunes. -Ipod Touch 3g with 4.3 software -iTunes 10.2 -PC: HP Pavilion Dv6. -OS: Windows 7 64-bit [Eng] Ok so... I previously kept my ipod touch version as 3.1.3, and only used itunes 9.2 because I tried using

  • Problem office 2004

    Hello I have a problem with installing office 2004 for mac. When i try to install office the installer crashes. I have tried to delete office file's but i couldn't find older office files. thanks

  • TS1717 iTunes cd blue wont open,or play why?

    I purchased cd blue by Leann rimes.  It did the billing twice.  I can not get the cd to play.  I tried to delete like apple support suggested, that did not work.  Was told to go to apple store, they couldn't help.  Please help me.  I am new at this I

  • Aliases of Members not getting retrieved

    Hello all      I want to retrieve members from an Essbase Database/outline of my application with their Aliases(want to retrieve only Aliases), I've used Smart View API for VBA to achieve the same, but somehow Aliases are not getting retrieved instea

  • Comparing Solaris systems?

    Does anyone have a process that they can recommend for comparing different Solaris systems to look for inconsistencies? We have a 6 node cluster where all 6 nodes should be identical. For now, I want to verify that they have the same patches applied