Changes in standard transactions

hi gurus,
my client wants to extend the vendor name characters from 40 to 60 characters in vendor name field.
can we do it in standard transaction
i think we cant do it , but i am not confident.
Please advise
regards
subbu

SHD0 does not let you extend fields, it simply allows you to set default entries (similar to screen variants)
There is NO WAY that you should consider extending the length of this field. It is used in HUNDREDS of reports and transactions and each one would also have to change.
It is better to split the text across name 2 as already suggested.
Steve B

Similar Messages

How to make changes in standard transaction ME51N.

Hi,
   Can anyone tell me how to make changes in standard transaction ME51N.
   I want to call transaction AS01 by clicking on standard button create asset. Please do the needful.
Regards.
Aniruddha

Hi anirudda
          As i understood from your question is that you want to add a new field 'CREATE ASSET' on me51n screen.
If i am correct you can use 'MEREQ001' enhancement for this purpose and you can write you code in the exits available in this enhancement.
Please check the documentation of this enhancement for more info.
(Use Smod for this purpose)
I hope it is helpful.
Reward points
Thanks,
Prasanna

CHANGE in standard transaction ME21n/ME22N/ME23N

Hello Forum,
My client's business require me to add two new columns in PO schedule line items.
These two columns are to be taken from EKET table.
I have got the access key to modify the standard transaction.
I have located that it has to be added in program:SAPLMEGUI at screen#1320.
Any inputs how to proceed further.
thanks

Sudheer, your point well taken
But I have to add two columns and not two fields, in PO Sch Line Item.
I have mentioned program name SAPLMEGUI at screen#1320. I guess its a table control and I have to add modify that table control to add new columns into it.
Kindly reply back with suggestions for the same.
In this case no screen exits can help me.

Change SAP Standard Transaction

I need to call one standard Tcode in Portal. That Tcode is having four Tabstrip. Requirement is each tabstrip showed in different pages also only few fields should be shown. Can you help me in this? Can I do only using Web dynpro and Portal? Is it necessary to use ITS and/or BSP?

Hi,
do you mean that you intend to build the transaction as an iView? Then you could, of course, integrate it into Web Dynpro ABAP, see http://help.sap.com/saphelp_nw2004s/helpdata/en/27/96b9c8f14e7d498b90a674710dc9c2/frameset.htm
Regards, Heidi

Hyperlink in a User Exit for standard transaction?

Hi,
First off, I am a novice in ABAP. After some searching on the forums, I have found out that it is possible to have hyperlinks in an ABAP Programm.
Is it possible to change a standard transaction (through user exits) to add in this sort of functionality? For instance, a link in VA23 to jump to a remote portal? Is it possible? And if yes, could anyone give me an example of how this could be done? Links to documentation or tutorials would also help me.
Could such a functionality be added through a button in the same transaction instead of a simple hyperlink?
Thanks and regards
Sameer

The SAP.Web.UI.Controls namespace is a collection of classes that allow you to create controls in an iView. SAP NetWeaver web controls run on the server and include form controls such as buttons, input fields and tables. Because web server controls run on the server, you can programmatically control these elements. SAP NetWeaver controls are more abstract than HTML server controls or Microsoft web controls from the System.Web.UI.WebControls namespace. Their object model does not necessarily reflect HTML or Microsoft web control interfaces. SAP NetWeaver controls reflect the SAP WebDynpro UI elements. They also implement the behaviour of SAP Unified Rendering, which allows custom UI branding by selecting and modifying CSS style sheets. This namespace includes the ViewElement class, which is derived from System.Web.UI.Controls.Control and provides all SAP server controls with a common set of functionality. Therefore you can also mix SAP NetWeaver controls with Miocrosoft web controls within an iView.
for more details on this please go through the below link.
https://www.sdn.sap.com/irj/go/km/docs/library/dotnet/pdk%20for%20.net/developer's%20Guide%20PDK%202.0%20for%20.NET/Reference/SAP.Web.UI.Controls.html
<b>Give points if useful</b>
related topics
http://help.sap.com/saphelp_crm50/helpdata/en/20/041c3a1cf1c54be10000000a114084/content.htm
http://help.sap.com/saphelp_crm50/helpdata/en/e7/43f438c842cc2be10000000a114084/content.htm

Changing the output layout of standard transaction FPWLM

Hi All,
We have a requirement where we need to change the output layout of the standard transaction FPWLM which is used fo the management of worklist for collecion management.
In this transaction under the current worklist if we select the worklist ID and display it , work items are displayed in the Grid display. We want to add certain fields here in the output layout of this transaction. We tried adding the fields by selecting the change layout option which displays the list of hidden fields which can be added . But the problem is the field which we want to add is not present in this list.
Is there any other way to add the fields to the output layout of standard transaction.
thanks
regards
manipal

Hi Manipal,
Maybe check IMG under Basic Settings for Collections Management.
This node contains the sub-node Worklist.
Two enhancements are availaable here:
BAdI: Enhancement of Worklist Items on Creation
BAdI: Enhancement of Worklist Items on Display
Maybe read the documentation for the nodes to determine if the enhancements will accomplish what you are looking for!?
Since this component is not active in our installation, I have no experience with this functionality.
Kind regards,
Robert

Changing the descriptions in the standard transactions

Hi,
What am i supposed to do to change the discription of any field in the standard
transaction. eg: say the material in mmo1 should be changed to ' material code' from 'material'.

chk this
Re: change description of field in mm02
reward if helpful

Changing a standard SAP transaction - FB03

Hi,
I am calling the standard transaction FB03 in my program. In this program, after a document's details are displayed, when I click on the line items details, the line items are shown in changeable mode. The change-display button is also there. I want to make it non-editable, also removing the change-display button.
Is there anything I can do to change this?

Not possible without modificating the standard .
btw , there are some other transactrions to change fi-documents like fb09
regards Andreas

How to find the Customer changes made to the standard transaction C223

Hi,
Greetings !
My customer wants to find out whether any customer changes has been made to the standard transaction C223.
As there is Badis, Programs, Function Group and its a kind of linked list going on.. on an on ...
Could you please let me know that is there any easy way to find out whether Customer changes has been done to the standard transaction C223.
(if not)
Is there a way to find it manually or using some alternative ways.. ? My point is I should want to confirm it to the minute detail and finally confirm whether transaction is changed or not.
Thanking you in anticipation.
Thanks & Best Regards,
L Raghunahth

Hi,
Thanks for the reply.
Actually I want to list out all the programs functional modules, tables data elements etc responsible for the transaction C223.
is there any program or transaction which will give me all the details.
Thanks and Regards
L Raghunahth

Change in Standard SAP menu : How to catch the transaction code!

Hello,
I have added a menu item 'More Help' to the standard SAP menu 'Help' which should navigate to URLs for the respective transactions. Suppose i am in transaction FB03 and click the 'More Help' menu, it should navigate to the URL mentioned in a table.
My Problem is I have created a transaction for that menu item 'zhelp' which calls a program and when i am clicking the 'more help' tab , the original value of sy-tcode which should be FB03 is replaced with the new Transaction which is used for the menu item i.e. 'zhelp'. Because of this i am not able to retrieve my value from the table corresponding to the transaction FB03.
Is there any other system field which stores the value of transaction FB03 aftter navigating to other transaction? How should i go ahead with this? Please help!!
Edited by: Rojalin Priyadarshiny on Sep 10, 2009 3:45 PM

Hi,
I really dont know in how many standard transactions you have added the More Help option.
If you hav added only in 2 to 3 transactions then you can think on using the below Logic.
Say if u have added in FB01, FB02 and FB03 transaction.
Find one exit for each transaction, in the exit EXPORT TCODE ( EX: FB01 ) to memory.
In your Ztransaction report IMPORT the TCODE from memory.
Now u will get FB01 after inmport statement and u can make use of this.
If the option is added in many transactions , you have to think again in using the above logic as it involves identification of many Exits.
Regards,
Sravan

How to create F4 for the standard transaction

Hi all ,
How to create F4 for the standard transaction for a particular field .
Bye

Santosh,
You can create F4 values for a field in a standard Transaction .
1. First search for a standard search help meeting your requirement .
2. If you don't find one, create your own custom (z) serach help .
( 1 is preferable )
After that, include that serch help to the standard field in the transaction .
For this u need to go to the screen
( F1->F9-> screen-> Field )
Click on the property of the field and include the search help .
You ll require the access key from the basisi guys as u r changing standard .
Hope it helps,
~ laxmi
Reward for helpful answers

Standard transaction CG02 is not saving the data through F4 help.

Hi Guru's,
I have a standard transaction CG02 for this i need to maintain the data for few of the fileds like Heat sensitive, Thermal energy hazard etc for updating Derived C-Alpha code. So for i can able to maintain data in two ways either directly or through F4 help. when i supply data through F4 help, on the F4 help window im providing the value and clicking on continue button. when i press on the contine button it has to update the Derived C-Alpha code if all the required fields filled. If suppose i do nt fill the required fileds it has to through the error message on the status bar like 'Invalid Data Combination'. Now the problem is when i clicking on continue button of F4 help window im displaying error message. when i try to change the value or try to fill the required fields so for im clicking on F4 button then its directly taking me out from the transaction. If i press on any key also samething is happening but the same is not happening when i supplied the value directly and saving. Please let me know the reason and help me for the same with needful solution. If anyting required plz ask me i wil provide u.
Here we are using the user-exit EXIT_SAPLC107_001 and is used in FM C107_CUSTOMER_FUNCTION_CALL.
Thanks in advance.
Yours,
Somu.

Hi Guru's,
I have a standard transaction CG02 for this i need to maintain the data for few of the fileds like Heat sensitive, Thermal energy hazard etc for updating Derived C-Alpha code. So for i can able to maintain data in two ways either directly or through F4 help. when i supply data through F4 help, on the F4 help window im providing the value and clicking on continue button. when i press on the contine button it has to update the Derived C-Alpha code if all the required fields filled. If suppose i do nt fill the required fileds it has to through the error message on the status bar like 'Invalid Data Combination'. Now the problem is when i clicking on continue button of F4 help window im displaying error message. when i try to change the value or try to fill the required fields so for im clicking on F4 button then its directly taking me out from the transaction. If i press on any key also samething is happening but the same is not happening when i supplied the value directly and saving. Please let me know the reason and help me for the same with needful solution. If anyting required plz ask me i wil provide u.
Here we are using the user-exit EXIT_SAPLC107_001 and is used in FM C107_CUSTOMER_FUNCTION_CALL.
Thanks in advance.
Yours,
Somu.

How to add custom authorization object to a SAP standard transaction

Hi All,
I have a standard tcode IW22 (change PM Notification) and I would lock changing when some users modify the field Functional Location (field TPLNR).
Since this field does not have an authorization object associated, I've tried to solve this problem with the following steps:
- tcode SU20 - creation of new authorization field TPLNR with data element TPLNR
- tcode SU21 - creation of a new auth object in transaction SU21 with name ZPM and field (TPLNR, ACTVT and TCOD)
- tcode SU24 - insert of new authorization field e check indicator (green)
- tcode SU22 - check indicator - check (green)
After this we have created a new role with PFCG and add transaction IW22; the new auth.ZPM was added manually.
We have try to analyze log (ST01 trace) but it seems no check was made in the trace file.
It seems new authorization object was not checked.
My question is: "Is it possible to add a custom authorization object into standard transaction and implementing authorization check without writing abap code in exit or badi ?"
Thanks
Maurizio

> My question is: "Is it possible to add a custom authorization object into standard transaction and implementing authorization check without writing abap code in exit or badi ?"
>
No .. not possible. The list of Auth. objects SAP proposed in SU24 for each Stnd. SAP TCodes are basically documentation of the Authority-Checks in the program for that TCode. The extra advantage of SU24 is to set the object status (means the proposal for availability in PFCG) among any of the four check indicators. So that we can provide our own value (customer specific values which are basically defined and separate from sap provided values) and reinforce the authorization concept of the organization.
So you need to provide a Authority-Check for ZPM in the program of IW22 to make sure that the fields you want to be checked are really being checked during execution of the tcode.
Regards,
Dipanjan

How to add new fields to a table control in a standard transaction JHA3X

Hi All,
        We have a requirement where we have to add two new fields to a table control
        in a standard transaction JHA3X .
       We don't want any changes into our standard code and also we don't have any USER EXIT for that
       screen.
       Please provide with some solutions for the same .
       Thanks in advance .

You will need add this to the /var/clientlibs/libs/cq/security/widgets.js and add the field under the 'CQ.security.UserProperties'. For example, if you wanted to add a field to show the 'Middle Name' under the 'First Name' field, you can try adding the following:
            "items":[{
                    "xtype":"textfield",
                    "fieldLabel":CQ.I18n.getMessage("Login"),
                    "anchor":"100%",
                    "disabled":true,
                    "allowBlank":false,
                    "name":"rep:userId"
                    "xtype":"textfield",
                    "fieldLabel":CQ.I18n.getMessage("First Name"),
                    "anchor":"100%",
                    "name":"givenName"
                    "xtype":"textfield",
                    "fieldLabel":CQ.I18n.getMessage("Middle Name"),
                    "anchor":"100%",
                    "name":"middleName",
                    "xtype":"textfield",
                    "fieldLabel":CQ.I18n.getMessage("Last Name"),
                    "anchor":"100%",
                    "name":"familyName",
                    "allowBlank":false
Hope this helps.
-Ron

Changes in standard form

Hello,
I have a standard transaction MI21 for physical inventory.
I need to change the standard form and attached back to this transaction.My first query is how to find the form name in standard program? program name is RM07IDRU.
Can i copy the original form in zform and make a changes and attach it back to standard program.
How to do this?
Please let me know as its an urgent.
Waiting for positive reply.
Thanks
Suchita

Forms are INVENT and INVENT_VKBW you can use either of these accrding to your requirement.
But if you copy it to Z form then you will be needed to copy the program and then change form names in OPEN_FORM.
Reward points if useful.
Regards,
Nageswar

Changes in standard transactions

Similar Messages

Maybe you are looking for