Changing the output layout of standard transaction FPWLM

Hi All,
We have a requirement where we need to change the output layout of the standard transaction FPWLM which is used fo the management of worklist for collecion management.
In this transaction under the current worklist if we select the worklist ID and display it , work items are displayed in the Grid display. We want to add certain fields here in the output layout of this transaction. We tried adding the fields by selecting the change layout option which displays the list of hidden fields which can be added . But the problem is the field which we want to add is not present in this list.
Is there any other way to add the fields to the output layout of standard transaction.
thanks
regards
manipal

Hi Manipal,
Maybe check IMG under Basic Settings for Collections Management.
This node contains the sub-node Worklist.
Two enhancements are availaable here:
BAdI: Enhancement of Worklist Items on Creation
BAdI: Enhancement of Worklist Items on Display
Maybe read the documentation for the nodes to determine if the enhancements will accomplish what you are looking for!?
Since this component is not active in our installation, I have no experience with this functionality.
Kind regards,
Robert

Similar Messages

  • Using BADI to change the field value in standard transaction ME21N

    Hello People,
    In transaction ME21N to create PO, i have a field where i want to allocate the batch ( CHARG )  NONRETG to all the PO's that are created. I have a BADI for that, however i do i implement the BADI so that the Batch 'NONRETG' is automatically allocated to all the PO's that are created. Please advise whether a USER EXIT would be better or a BADI would do the work. Right answer would be rewarded.
    regards,
    Sandeep Salaria

    Hi,
    YOU can very well implement.Use this BADi->ME_GUI_PO_CUST
    Incase you are going to implemet userexit U can use the Exit: MM06E005.
    Regards
    Kiran Sure

  • Can't change the keyboard layout in Xorg

    I tried the different possibilities in the wiki to change the keyboard layout in X. setxkbmap does work, but I'd like to keep the settings across reboots. I tried the two methods in the wiki, here are my config files:
    /etc/X11/xorg.conf.d/00-keyboard.conf (created by localectl)
    # Read and parsed by systemd-localed. It's probably wise not to edit this file
    # manually too freely.
    Section "InputClass"
    Identifier "system-keyboard"
    MatchIsKeyboard "on"
    Option "XkbLayout" "de,ru"
    Option "XkbModel" "pc104"
    Option "XkbVariant" ","
    Option "XkbOptions" "grp:alt_shift_toggle"
    EndSection
    /etc/X11/xorg.conf.d/10-keyboard.conf (manually created)
    Section "InputClass"
    Identifier "system-keyboard"
    MatchIsKeyboard "on"
    Option "XkbLayout" "de,ru"
    Option "XkbModel" "pc104"
    Option "XkbVariant" ","
    Option "XkbOptions" "grp:alt_shift_toggle"
    EndSection
    But the output of "setxkbmap -print -verbose 10" shows german and us-english layout:
    Setting verbose level to 10
    locale is C
    Trying to load rules file ./rules/evdev...
    Trying to load rules file /usr/share/X11/xkb/rules/evdev...
    Success.
    Applied rules from evdev:
    rules: evdev
    model: pc104
    layout: de,us
    variant: ,
    options: grp:alt_shift_toggle
    Trying to build keymap using the following components:
    keycodes: evdev+aliases(qwertz)
    types: complete
    compat: complete
    symbols: pc+de+us:2+inet(evdev)+group(alt_shift_toggle)
    geometry: pc(pc104)
    xkb_keymap {
    xkb_keycodes { include "evdev+aliases(qwertz)" };
    xkb_types { include "complete" };
    xkb_compat { include "complete" };
    xkb_symbols { include "pc+de+us:2+inet(evdev)+group(alt_shift_toggle)"};
    xkb_geometry { include "pc(pc104)" };
    Does anybody know what I am doing wrong? I would appreciate any help.
    Thomas

    In your .xinitrc file put setxkbmap yy & (yy=country code for example de) before it executes your de/wm.

  • How to change the Safety Intervals for standard Content datasources

    Go to RSA2->give your datasource name ->setting up GEN delta
    It shows you whts the safety interval setting.
    <b>
    How to change the Safety Intervals for standard Content datasources since when I go to RSA2 edit and change options are always greyed out. let me know if there is any other transaction code or table to do this.</b>
    Thanks
    Soniya Kapoor

    Hi Soniya,
    1) try  RSA6.....also  RSA8 for additional info.
    2) useful link:
        http://help.sap.com/saphelp_nw04/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
    Good luck, BB

  • How to change the default Layout Of the Error Page (to hide Home link)?

    How to change the default Layout Of the Error Page (to hide Home link)?
    If a user want to view some page that he/she don't have access to view it, a error page with this message will be displayed.
    "You do not have permission to perform this operation. (WWC-44131)"
    The error page, have in the Upper right page, Home link and Help link.
    My question is, How to Hide HOME link and HELP link in the Page?
    I try to find the template of the page, but failed to do that.
    Can anybody help?..it urgent.
    Thanks.

    Modifying the error page is not supported in the current release of Portal (9.0.2). You will be able to do this in the upcoming 9.0.2.6 release, planned for the end of May.
    Regards,
    Jerry
    PortalPM

  • How to change the output as text format in Apps R12.1.3

    Hi All,
    Currently iam trying to modify the Java Concurrent Program (FDExtractAndFormatting) in Batch Payment Process. This Program is generated in text format in 11i APPS. Now we are upgrading to R12.1.3. In R12.1.3 output is coming as PDF format. Here my requirement is how to change the output as text format in R12.1.3 also.
    Please do the needful and suggest me.
    Regards,
    Jagadeesh

    1. It is seeded java concurrent program. Some attributes are missing from 11i to R12. In 11i it is a text format.So i have to investgate on how to retrive those attributes in R12. What is the concurrent program name?
    Have you tried to change the output and submit the request?
    2. Once all are attributes are coming in PDF format. Client wants to open same output in text format as it is 11i (In R12 it is generated in PDF format).If the above does not help, please log a SR.
    Thanks,
    Hussein

  • Update LIKP table while saving the output type in VT02N transaction

    Hi All,
    I have a requirement where i have to update Delivery Priority(LPRIO) field in LIKP table while saving the output type in VT02N transaction. I am not able to use the BAPI "BAPI_OUTB_DELIVERY_CHANGE" or FM "WS_DELIVERY_UPDATE" because, when we save the output type the programs that are configured in NACE are triggered in update mode and hence i will get a roll back error.
    Let me know other ways of updating the table at the time of saving output type for shipment transaction VT02N.

    This could be a result of one of the following reasons:
    1: Incorrect smart form/routine assigned in the output configuration (NACE)
    2: Serial number range of the delivery expired
    3: The default settings of the user (SU01) processing the delivery is missing the default printer name.
    Hope this is helpful
    Manish

  • User exit/BADi to change the header text in MIRO transaction

    Hi all,
    I am searching user exit or badi to change the header text in MIRO transaction.
    My requirement is, before post the invoice I need to populate the vendor name in Header text field(MIRO -> Details tab -> header text field ). I have tried all the user exits and BADi's related to MIRO. Doesn't work. If anybody knows please share.
    Thanks,
    Pranav

    Try BADI INVOICE_UPDATE.
    If you are in system version is ECC 6.0, you can find out a Enhancement SPOT (ES_SAPLMRMC) under Function module MRM_FINAL_CHECK, which can be used to perform this requirement
    Hope this helps.
    Thanks,
    Balaji
    Edited by: Balaji Ganapathiraman on Mar 14, 2008 4:43 PM

  • How to change the output directory of .xml files

    Hi,
    There are lots of .xml files generated under
    $ORACLE_AS_HOME/j2ee/home/applications/xmlpserver/xmlpserver/xml.
    (ex:/usb/bipub3/oracle/oc4j_bi/j2ee/home/applications/xmlpserver/xmlpserver/xml).
    I found these files are generated in the following operation;
    1.Log in BI Publisher.
    2.Select the Schedules tab.
    I think they are kind of temp files so we will be able to delete them.
    But I'd like to know how to change the output directory.
    Can we change the above directory to other path?
    Regards.

    Why? As that may invalidate support since you configure/alter the deployment.
    The location is specified in oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver.war, so you could go into the war file and alter it.

  • How to change the output executable file name(a.prj:(output)--- b.exe)

    LabWindows / CVI： how to change the output executable file name
                For example, I have an A project a.prj, I do not want to compile the output file is a.exe, but b.exe.
    I will try to save as a.prj b.prj, a.cws save as b.cws
    eg:a.prj  ---->(output)--->b.exe
    Solved!
    Go to Solution.

    You can go to Build >> Target Settings menu item, select Release (or Release 64) in the Configuration filed and set the name of the executable to create in Application FIle field, withouyt need to change the prj or cws filename.
    See the complete description of available options here.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to change the field length in standard sap program.

    Hi All,
    How to change the field length in standard sap program.
    Urgent
    Example:
    Text1 type c length 75,
    To change :
    Text1 type c length 150,
    Point will be rewarded..
    Thank you,
    Vikram.C

    If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
    Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
    regards, Rob

  • Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. Any ideas of how to fix this?

    Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?

    Hi im,
    Thanks for using Apple Support Communities.  This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
    Apple TV (2nd and 3rd generation): Troubleshooting video issues
    http://support.apple.com/kb/TS5148
    Cheers,
    - Ari

  • Change the output report in a query SQ01

    Hi all,
    I need to change the output format for a column in a report that was developed using SQ01.
    The column is showing the result YES or NOT and I would like to show X or blank.
    Do you know where I can set this option?
    Thanks and regards

    I don't think there is an option per se, but you can create a local field and assign a value to it based on the value of Yes/No field. Then hide the "original" Yes/No field and display the local one instead. Voila!

  • Cannot change the output medium for contract

    Hi Everyone,
    In the contract we have "Output" tab to change the output medium for the contract.
    So the issue is when I click on the change button and try to change e-mail address,I am not able to do that.
    The e-mail address is grayed out though I am in the change mode.
    This is happening for some contracts only.
    How should I change the e-mail address of the contract?
    Thanks & Regards,
    Khushbu.
    Edited by: Khushbu Brahmbhatt on Feb 25, 2011 9:01 PM

    Hi,
    Have a look at the foll thread for more pointers;
    Re: Change medium of output for Changed PO in SRM
    BR,
    Disha.
    Do reward points for useful answers.

  • Does BAPI call the validations defined for standard transactions ?

    Hi Experts,
    Can anyone tell me if BAPI handles the validations defined for standard transactions ? I have a standard transaction KB15N. Validation defined for a field works fine when run thorugh the transaction. But if same data is updated using BAPI , validations are not getting called and wrong data is updated in the system.
    Could you please confirm if BAPI handles validations ? If yes, how to take care of it ?
    Best  Regards,
    V joshi

    Hi Thomas,
    Thanks for your quick reply.
    I have following condition in the prerequsite of validation
    Prerequsite :      Transaction code = 'KB15N'
    check :               Sr cost element > '90000000' AND Sr cost element < '9ZZZZZZZ'
    I am using BAPI  'BAPI_ACC_MANUAL_ALLOC_POST'  for posting.
    Do i need to modify the pre-requisite  condition ? Kindly guide.
    Regards,
    V Joshi

Maybe you are looking for