Changes in STP not taking affect in FCP

Hi guys... Thanks for the help in advance.
Im trying to change the pitch of my voice over in STP but the changes doesnt apply in FCP not even if i save in to hard drive. Doesnt mater what format i save it to. or what ever changes i do to the audio clip, when i save it and play the saved clip there are no changes what so ever.
Andre

Yep, that's how it's working for now, until the next update fixes that.

Similar Messages

Selection screen flow logic change not taking affect. Please help!

Hi
   When I am trying to change the selection scren flow logic I get the following message:
Selection screen: Report generation makes screen changes ineffective.
Whatever I am changing is not taking affect in runtime.
Even though I have activated the changed code for the screen
What shall I do resolve this?
Thanks
Gopal

You should not be changing the screen flow logic of a standard selection screen 1000. It will always be regenerated. In order to modify the standard selection screen, you can do this in the AT SELECTION-SCREEN output event and loop at screen and change the attributes.
Loop at screen.
if screen-name = 'P_CHECK'.
    screen-input = '0'.
    modify screen.
endif.
endloop.
Regards,
Rich Heilman

Code changes not taking affect

Hi.
I made changes to code, and they are not taking affect, even after build and deploy, even after deleteing and re-importing the project, reloading the project, and even after restarting the server.
The old code seems to be executing instead - even though it is in a class I totally deleted (and replaced with a new class/file).
And when running through it in the debugger, and trying to step into the new method (constructor of the new class in this case), I receive the following error: Source not found for DateTableFilterLink (which is the old, deleted, class), even though the code now references a new class instead - DateTableFilterLink2.
An additional note: This code is in helper classes situated under src/packages in my DC
Any suggestions?
Thanks you,
Dina Mann

In bin folder:
The old class file no longer exists.
I deleted the .class file for the calling code, where I now instanciate teh new class DateTableFilterLink2 instead of the old (and deleted) class DateTableFilterLink.
I rebuilt and re-deployed my project, and still the problem exists.
The debugger still tries stepping into the old class DateTableFilterLink, and the result of the execution matches the functionality that used to be in teh old class, and not according to teh logic in teh new class.

Connecting nodes with uninode -apply is not taking affect

Connecting nodes with uninode -apply
is not taking affect.

There are two problems with the utility uninode. They address different issues
and require different workarounds. Please review carefully.

<OL>
<LI>Applying changes to a nodes.ini
file using uninode where there is a mixture
of + and - nodes.

There is a problem with uninode where the flag -ALL doesn't completely update
all of the remote node information. If you are removing a node from a node
network, keep in mind that it is really a two step process: 
1)Connect to all "+" nodes and remove the "-" node from each of their databases.
2)Connect to the "-" node and remove the "+" nodes from that database.

The best possible workaround is to run uninode -apply ALL followed by
uninode -apply all.

<LI>Applying changes to a nodes.ini
file using uninode where there are special
rules of node connections (e.g. A->B: +1, etc.).

With this you are forced to use unidbfix -export
to generate your remotenodes.ini
file, and then you must manually edit this file as required. Run
unidbfix -import to
update the remotenode.dat file.

Run unidbfix -export
and then unidbfix -import
to update all the remote nodes
with the new information.
</OL>

HI All,
I've used the OITM along with the ITM1 and I still receive the "Updated Successful" message but no changes.
I created another pricelist within SAP B1 Client and updated the prices within that pricelist and it worked just fine.
I noticed when I queried everything from OPLN that the pricelists that I am trying to import have a different value for "Data Source" which is equal to O, I copied these price lists with Copy Express. The pricelist I created within SAP B1 Client has a Data Source = "I".
I've included the OITM and ITM file I used which was returning a successful result but no change.
ITM1
ParentKey LineNum PriceList Price Currency
ItemCode LineNum PriceList Price Currency
85108 25 26 55.00 $
OITM
ItemCode
ItemCode
85108

DTW & ITM1 - Update is OK but not Taking Affect

HI All,
I've been updating price lists with ITM1 and receiving a successful notification after it is complete. However, the changes are not taking place in the DB, I have checked within SAP B1 and the SQL Server using a query.
I believe this is occurring with the OCRD template too as I was trying to update 1 particular field and it would not take affect although it notified me of a successful import.
Can someone please let me know what is going on?
I've included a line from my ITM1 template below which is successful when attempting to import:
85108     25     26     50.00     $
Thanks, Alec.

HI All,
I've used the OITM along with the ITM1 and I still receive the "Updated Successful" message but no changes.
I created another pricelist within SAP B1 Client and updated the prices within that pricelist and it worked just fine.
I noticed when I queried everything from OPLN that the pricelists that I am trying to import have a different value for "Data Source" which is equal to O, I copied these price lists with Copy Express. The pricelist I created within SAP B1 Client has a Data Source = "I".
I've included the OITM and ITM file I used which was returning a successful result but no change.
ITM1
ParentKey     LineNum     PriceList     Price     Currency
ItemCode     LineNum     PriceList     Price     Currency
85108     25     26     55.00     $
OITM
ItemCode
ItemCode
85108

Keyboard layout not taking affect in password boxes

I recently switched to the Dvorak layout on my iMac. Almost immediately, I noticed that this change did not affect when I was typing a Mac system password or Keychain password (I had to type the passwords as I used to, not the way I would expect to have to type them under the new layout).
This seemed strange to me, but I didn't worry much, just took it as a sign that I'd have to type passwords in QWERTY all the time. I speculated that perhaps passwords were stored as keystrokes, rather than as the characters that these keystrokes represented.
However, after a system reboot, my passwords stopped working again, and I figured out that now I had to type them in Dvorak, after all. This still wasn't too bad, I just assumed that the system needed to restart before Dvorak was fully added, and now it would work as expected.
Here's the really strange thing I just noticed: when I just changed back to QWERTY momentarily, my passwords were still working as typed in Dvorak! Changing the layout has stopped affecting the password fields again.
So, can anyone tell me how this works? The only thing I can think is this: maybe whatever keyboard layout you had when you logged in (and, thus, the one you had when you last logged out) is the one you are stuck with for the entire session until you log out? Does this really make sense? Or is something else causing this strange behavior?

Hi Darkxsun, and Welcome to Apple Discussions!
I found this ..
"During system boot, holding down modifier keys such as "C" to boot off of CD, "T" to boot in firewire target disk mode, etc. appear to be hard coded to their Qwerty positions on your keyboard. Some reports suggest that choosing Dvorak as your default layout at system install time may remedy this situation."
.. and wondered if the same may be true of your password anomalies.
This was from here .. http://www.chimoosoft.com/articles/dvorak.php
I hope it helps!
Regards,
Robert.

Configuration changes not taking affect

When I change the Them in FF, it falls back to a previous one.
When i save a password, it isnt auto logging into sites
Noscript, seems to be VERY forgetful, about what I set permanent. As in my HOME PAGE in Google, isnt allowed until I Set them again, and again, and again.
I set FF to run as Admin, and win7 still asks me IF, "do you really want to run this".. Its funny that the TAGGED FF on the bar, does not ask this. But the TAGGED FF only lets me run 1 FF at a time.
Its as if win 7 is not letting FF write its config file.

yes there are two instances on that machine, the changes to mime types was done through console for both the instances and both the instnaces were restarted including the Admin server. However, we will still see content being served text/plain. Please help, if you want I can send you the obj.conf, magnus.conf and mime.types files so that you can take a look.

XML file not taking transitions in FCP

I imported film into the only way I know how, through iMovie. I then exported it out as an XML file then into FCP. Started editing only to see none of the transitions I'd place between clips is staying. It just has a 'red X' come up when I am trying to apply the transition.
Don't recall having this issue. Is it the way I imported the film? Help!
**Also, is there another way to capture the film instead of through iMovie?

**Also, is there another way to capture the film instead of through iMovie?
Of course. It's called Final Cut Pro.
Tell us the version of Final Cut Pro, the format of your source material, the camera you are shooting with and all will be revealed.

Presets not taking affect when printing via adobe reader

I have discovered that after upgrading to Mavericks, when printing multiple page documents via Adobe Reader, it will not take on my 1-sided printing preset and instead prints 2-sided as per the default setting on the printer driver.
Has anyone come across this?

kirstyfiona wrote:
I dont seem to have the option for printing on both sides on the adobe print screen. In the past it would just use whatever preset you currently had set.
I seldom use Adobe Reader except for completing forms and printing them. Preview never seems to get those right. I did do some testing on my Mavericks machine and can confirm that Adobe Reader is ignoring a Preset I created for my EPSON WorkForce 1100. From the CUPS debugging log it would appear that Adobe Reader is bypassing the Apple print window. It would not therefore be picking up a Preset.
Wht make and model of printer are you using? If your prnter uses a PDE to set duplexing, I can imagine that Adobe Reader is not going that deep. It would look at the PPD and just use whatever is in there. If you let me know the printer make and model, I may be able to confirm that. I am not sure that will get you any closer to a sulution. It may help answer "why".

Enhancement Section Activated but changes not taking place

Hello Friends,
I have been getting a dump error for FM GN_DELIVERY_CREATE_FOR_DIALOG which says that
"spe_version" does not exist in table "LIPS".
I found a enhancement option that commented out the perform that lead to the subroutine which has the error code.
I have activated business function LOG_LE_INTEGRATION via SFW5 which activates among others switch LE_SFWS_SC3.
I can see the global status of the switch as ON.
This switch is associated with enhancement spot ES_SAPLV50S which has implemented an enhancement section in inlcude LV50LF14 lines 191 -194
However, despite activation the changes are not taking place and i am still getting a dump error.
I am also not able to set a break-point in the FM because the program cannot be generated
My question is: Is successful program generation a pre-requiste for enhancement source plug-ins to be effective?
Any pointers would be highly appreciated.
Thanks,
Minhaj.

Hi Minhajuddin ,
With "enhancement spot" we have come across similar short dumps and inactivation of spots even when steps are taken as per procedure.Please check if any notes are available for the same ,since most of the time it fixed the problem.
Regards
Byju

Changes to php.ini not taking effect

I'm running Leopard 10.5.8 with the Apple-supplied versions of PHP (5.2.10) and Apache (2.2.11). Changes made to the /etc/php.ini file are not taking effect after stop/start of Apache. phpinfo() and shell command php -i confirm the 'status quo'. The php.ini file permissions are 444 with root/wheel ownership. It was copied from the php.ini.default file that came with the php distribution. Here's what I'm trying to change - seems pretty like this should be pretty basic stuff:
include_path = ".:/usr/local/some_directory"
// Original entry in the php.ini.default file was commented out
// The directory '/usr/local/some_directory' exists
// phpinfo() only shows include_path = .:
magicquotesgpc = Off
// Original entry in the php.ini.default value was 'On'
// phpinfo() shows magicquotesgpc = Off
I've been all over the php.net website and cannot identify my error. Shouldn't the changes to the php.ini file should be interpreted immediately after restarting Apache?
Has anyone experienced a similar problem? Suggestions for fixing this malfunction would be greatly appreciated. I know I can hard code workarounds into my PHP code but that really defeats the whole purpose of even having a php.ini file....

Was able to successfully implement these changes on a different Mac OSX 10.5.8 system. Different architecture (1st system is MBP, 2nd system is MB) although each system has all software updates installed and is up-to-date. Copied php.ini file from MB to MBP and problematic settings were corrected. Ran /developer/applications/utilities/filemerge.app to check for differences between the two php.ini files. Found one (line 305):
Failing entry: error_reporting = E_ALL
Working entry: error_reporting = E_ALL & ~E_NOTICE
I took out E_NOTICE to help with debugging as per instructions from php.net/manual/en/errorfunc.configuration.php
Go figure....

Changes in motion not appearing in final cut pro x without restarting fcp x

Changes that I make to templates in FCP X do not appear while FCP X is open. I have to close FCP and reopen it to see the changes. What's up?

Yep, that's how it's working for now, until the next update fixes that.

Changes is special conversion routine not taking effect

I changed a special conversion routine specified in a conversion rule(BD79) with a rule type copy sender field.
I made the required changes to the function module CONVERSION_EXIT_&_OUTPUT and activated it but still the outbound Idoc suggests that the changes are not taking effect.
Can someone suggest what may be the reason for this?

The issue got resolved

BADI Changes are not taking effect

Hi,
I have done few changes at BADI...but those changes are not taking effect...
I activated everything...wat might b the problem?
Regards,
venkat
Moderator message: too vague, help not possible, please describe problems in all technical detail if posting again.
Edited by: Thomas Zloch on Feb 23, 2011 3:02 PM

Yes, Actually after looking into the problem some more it looks like the
changes are taking effect. The only problem that we are having is that
the start bar does not appear when the user log in and no drives are
showing up under windows explorer. I checked the policy and we did not
configure the section under windows explorer so i am not sure why the
drives are not showing. Also I am not sure why the start bar does not
appear.
Dan

HELP!: Canon Rebel XS Changing Settings Randomly and Not Taking Photos!!

PLEASE HELP! This is a very desperate attempt at reaching out for help before I THROW MY CAMERA AT THE WALL! Frustration level 1000 reached. The problem: I power up my Canon Rebel XS (purchased in 2009 and treated like my baby), point it at the subject matter, press the shutter button to take my beautiful photo, and all hell breaks loose! The camera decides to change all the settings, usually the shutter speed. When it's in full auto mode, the shutter speed changes between 3 or 4 different options (depending on the settings of the photo) and then it never releases, resulting in no photo. I've tried holding down the button and pressing quickly, neither work. So I've tried this in all settings: In Shutter Priority mode, the aperture changes randomly. In Aperture priority mode, (you guessed it!) shutter speed changes randomly. What changes in manual exposure mode? Exposure level... all on its own. OH -- I FORGOT TO MENTION, as they change, they BLINK! Whatever setting is randomly switching itself, it blinks. As if to taunt me and grab my attention -- "Hey, you! This is why I'm not taking the picture! HAHA!" So honestly, if anyone has any insight, I would be EXTREMELY grateful. But I'm pretty sure it's possessed by an evil spirit intent on seeing me rip all of my hair out. >.<

What if we control the shooting conditions? If you go outside on a sunny day, there would certainly be enough light for the camera to focus and take a shot. Have you tried this? I ask this because if I attempt to take a photo in a situation where there is simply not enough light, the camera will do precisely what you are describing... it has some limits to ISO, shutter speed, and aperture that it cannot exceed (it could in manual control, but will not in the auto or semi-auto modes.) I've noticed that my camera doesn't want to exceed certain shutter speed limits, ISO limits, and of course the lens constrains the aperture values available. Also, if the lens auto-focus is enabled and the camera is in "One Shot" focus mode (the default) it will not take an image until it can lock focus on at least one AF point. Give the camera enough light... and all of these problems go away. Shoot in Manual mode and all of these problems (except focus) also go away. If the camera is not moving (e.g. on a solid tripod) and the subject is not moving (e.g. a still scene) then you can take an exposure as long as necessary to get a shot -- but you may have to manually focus the lens if the lighting is poor and the subject lacks adequate contrast.

Changes in STP not taking affect in FCP

Similar Messages

Maybe you are looking for