Configuration changes not taking affect

When I change the Them in FF, it falls back to a previous one.
When i save a password, it isnt auto logging into sites
Noscript, seems to be VERY forgetful, about what I set permanent. As in my HOME PAGE in Google, isnt allowed until I Set them again, and again, and again.
I set FF to run as Admin, and win7 still asks me IF, "do you really want to run this".. Its funny that the TAGGED FF on the bar, does not ask this. But the TAGGED FF only lets me run 1 FF at a time.
Its as if win 7 is not letting FF write its config file.

yes there are two instances on that machine, the changes to mime types was done through console for both the instances and both the instnaces were restarted including the Admin server. However, we will still see content being served text/plain. Please help, if you want I can send you the obj.conf, magnus.conf and mime.types files so that you can take a look.

Similar Messages

Selection screen flow logic change not taking affect. Please help!

Hi
   When I am trying to change the selection scren flow logic I get the following message:
Selection screen: Report generation makes screen changes ineffective.
Whatever I am changing is not taking affect in runtime.
Even though I have activated the changed code for the screen
What shall I do resolve this?
Thanks
Gopal

You should not be changing the screen flow logic of a standard selection screen 1000. It will always be regenerated. In order to modify the standard selection screen, you can do this in the AT SELECTION-SCREEN output event and loop at screen and change the attributes.
Loop at screen.
if screen-name = 'P_CHECK'.
    screen-input = '0'.
    modify screen.
endif.
endloop.
Regards,
Rich Heilman

Code changes not taking affect

Hi.
I made changes to code, and they are not taking affect, even after build and deploy, even after deleteing and re-importing the project, reloading the project, and even after restarting the server.
The old code seems to be executing instead - even though it is in a class I totally deleted (and replaced with a new class/file).
And when running through it in the debugger, and trying to step into the new method (constructor of the new class in this case), I receive the following error: Source not found for DateTableFilterLink (which is the old, deleted, class), even though the code now references a new class instead - DateTableFilterLink2.
An additional note: This code is in helper classes situated under src/packages in my DC
Any suggestions?
Thanks you,
Dina Mann

In bin folder:
The old class file no longer exists.
I deleted the .class file for the calling code, where I now instanciate teh new class DateTableFilterLink2 instead of the old (and deleted) class DateTableFilterLink.
I rebuilt and re-deployed my project, and still the problem exists.
The debugger still tries stepping into the old class DateTableFilterLink, and the result of the execution matches the functionality that used to be in teh old class, and not according to teh logic in teh new class.

Configuration Changes not taking effect for Sun Java Web Server 6.1

Hi,
We're trying to make some changes to a sun ONE web server, to accept a couple of additional MIME-TYPES, as well as turning on compression and adding cache control headers to files. Please review the following and advise as to our path to proceed.
Our first challenge is that it seems that the change to the mime.types file are not being applied. We've added these to mime.types:
type=text/cache-manifest exts=manifest
type=image/svg+xml exts=svg,svgz
Elsewhere in the file is a configuration for PNG
type=image/png exts=png
Using HTTPFox firefox plugin, it's evident that these file types are being served with the mime-type of text/plain. See the attached image. Also note that PNGs are being sent as text/plain.
Are there any other changes except for mime.types that we need to do through console or in any of the obj.conf or magnus.conf file.

yes there are two instances on that machine, the changes to mime types was done through console for both the instances and both the instnaces were restarted including the Admin server. However, we will still see content being served text/plain. Please help, if you want I can send you the obj.conf, magnus.conf and mime.types files so that you can take a look.

Connecting nodes with uninode -apply is not taking affect

Connecting nodes with uninode -apply
is not taking affect.

There are two problems with the utility uninode. They address different issues
and require different workarounds. Please review carefully.

<OL>
<LI>Applying changes to a nodes.ini
file using uninode where there is a mixture
of + and - nodes.

There is a problem with uninode where the flag -ALL doesn't completely update
all of the remote node information. If you are removing a node from a node
network, keep in mind that it is really a two step process: 
1)Connect to all "+" nodes and remove the "-" node from each of their databases.
2)Connect to the "-" node and remove the "+" nodes from that database.

The best possible workaround is to run uninode -apply ALL followed by
uninode -apply all.

<LI>Applying changes to a nodes.ini
file using uninode where there are special
rules of node connections (e.g. A->B: +1, etc.).

With this you are forced to use unidbfix -export
to generate your remotenodes.ini
file, and then you must manually edit this file as required. Run
unidbfix -import to
update the remotenode.dat file.

Run unidbfix -export
and then unidbfix -import
to update all the remote nodes
with the new information.
</OL>

HI All,
I've used the OITM along with the ITM1 and I still receive the "Updated Successful" message but no changes.
I created another pricelist within SAP B1 Client and updated the prices within that pricelist and it worked just fine.
I noticed when I queried everything from OPLN that the pricelists that I am trying to import have a different value for "Data Source" which is equal to O, I copied these price lists with Copy Express. The pricelist I created within SAP B1 Client has a Data Source = "I".
I've included the OITM and ITM file I used which was returning a successful result but no change.
ITM1
ParentKey LineNum PriceList Price Currency
ItemCode LineNum PriceList Price Currency
85108 25 26 55.00 $
OITM
ItemCode
ItemCode
85108

DTW & ITM1 - Update is OK but not Taking Affect

HI All,
I've been updating price lists with ITM1 and receiving a successful notification after it is complete. However, the changes are not taking place in the DB, I have checked within SAP B1 and the SQL Server using a query.
I believe this is occurring with the OCRD template too as I was trying to update 1 particular field and it would not take affect although it notified me of a successful import.
Can someone please let me know what is going on?
I've included a line from my ITM1 template below which is successful when attempting to import:
85108     25     26     50.00     $
Thanks, Alec.

HI All,
I've used the OITM along with the ITM1 and I still receive the "Updated Successful" message but no changes.
I created another pricelist within SAP B1 Client and updated the prices within that pricelist and it worked just fine.
I noticed when I queried everything from OPLN that the pricelists that I am trying to import have a different value for "Data Source" which is equal to O, I copied these price lists with Copy Express. The pricelist I created within SAP B1 Client has a Data Source = "I".
I've included the OITM and ITM file I used which was returning a successful result but no change.
ITM1
ParentKey     LineNum     PriceList     Price     Currency
ItemCode     LineNum     PriceList     Price     Currency
85108     25     26     55.00     $
OITM
ItemCode
ItemCode
85108

Enhancement Section Activated but changes not taking place

Hello Friends,
I have been getting a dump error for FM GN_DELIVERY_CREATE_FOR_DIALOG which says that
"spe_version" does not exist in table "LIPS".
I found a enhancement option that commented out the perform that lead to the subroutine which has the error code.
I have activated business function LOG_LE_INTEGRATION via SFW5 which activates among others switch LE_SFWS_SC3.
I can see the global status of the switch as ON.
This switch is associated with enhancement spot ES_SAPLV50S which has implemented an enhancement section in inlcude LV50LF14 lines 191 -194
However, despite activation the changes are not taking place and i am still getting a dump error.
I am also not able to set a break-point in the FM because the program cannot be generated
My question is: Is successful program generation a pre-requiste for enhancement source plug-ins to be effective?
Any pointers would be highly appreciated.
Thanks,
Minhaj.

Hi Minhajuddin ,
With "enhancement spot" we have come across similar short dumps and inactivation of spots even when steps are taken as per procedure.Please check if any notes are available for the same ,since most of the time it fixed the problem.
Regards
Byju

[SOLVED] Syslinux.cfg changes not taking effect

When I first switched from grub to syslinux, I discovered that my system won't boot properly without a nomodeset command in the boot line (actually I knew that; it was also in grub but I installed that 5 years ago and long since forgot). It worked great.
A few weeks later, I had some trouble with the virtual terminal after X started, and someone suggested adding vga={x} to the boot command. I did that, but as it turns out the one I picked wasn't supported by my graphics card/monitor: Whenever I boot, it says to press {enter} to choose from available modes.
I found one that worked well, and added it to syslinux.cfg, saved my work, and rebooted. It *still* complains about the previous mode and makes me choose a proper one. I have rechecked that my new value is in syslinux.cfg and rebooted countless times since then, and the new values just won't take.
Is there something else I need to do after editing syslinux.cfg? The man page and wiki page are extremely thorough on initial installation and configuration, but not so much on making later changes.
Last edited by WyoPBS (2013-05-15 17:18:15)

When I change label values in syslinux.cfg the new label appears, so I am 100% positive I'm editing the right file on the right partition.
However, I found the answer -- When the list of modes pops up and I key in 313, the boot console is reading that as 0x313. When I have "vga=313" in the cfg file, syslinux reads that as 313 decimal which is 0x139, an invalid mode. It just never occurred to me that the mode menu was presenting hex values... Just had to change it to vga=0x313 and all is well.

Changes in STP not taking affect in FCP

Hi guys... Thanks for the help in advance.
Im trying to change the pitch of my voice over in STP but the changes doesnt apply in FCP not even if i save in to hard drive. Doesnt mater what format i save it to. or what ever changes i do to the audio clip, when i save it and play the saved clip there are no changes what so ever.
Andre

Yep, that's how it's working for now, until the next update fixes that.

Posture Policy changes not taking effect in ISE!

Hi all
I think that something is definitely wrong with the posturing rules on our ISE. I am seeing weird behaviour when changing posturing policies and thier elements in our ISE.
In Full, we currently have a policy written with a requirement that clients must have SEP 11, 12.0 or 12.1 installed and the AV defs can be up to 28 days older than the latest AV definition file date.
However, prior to us rolling out SEP12.1 in our environment, we wanted to test that the ISE could remediate SEP 12.1 just like it does for SEP 11 clients.
To do this I created a policy just to test SEP 12.1 being out of date for over 2 days. A client never matched this policy, it was still passing posture using the old policy. I imagine this is because the old policy was still referencing that sep12.1 defs can be up to 28days older than the current release date.
So, in the AV Compound Condition for the old policy I unticked references to SEP 12.0 & SEP 12.1. This had no effect. When I looked at the posture reports they were still showing SEP12.1 clients passing posture on the old policy. Well, this can’t be possible as I have unticked those conditions now.
So, in the end, I was forced to complete delete the old Posture Policy Rule, the Requirements Condition and the AV Compound Condition. I then created it all again from scratch just for SEP11, so there is no reference for SEP12.0 or 12.1.
When I check the posture reports, they are still showing that the SEP 11 clients are passing posture on the old rule and old conditions that don’t even exist any more! Luckily, I haven’t broken anything as clients are still being allowed on to the network and they are being posture checked.
It looks like the ISE is holding on to this old posture configuration somewhere and it may be that the only was to truly get the ISE to recognise the changes I have made to the posture policies is by restarting a particular service (not sure which one) or restarting the whole node (which I don’t really want to do, and shouldn’t have to do surely!).
Any suggestions? This is rather urgent as it is holding up testing of remediation for sep12.1 clients.
thanks
Mario De Rosa

OK, i resolved this by performing a Re-Sync between my two ISE nodes.
It appears that the secondary ISE node went in to a "Replication Disabled" state. Once I performed the Re-Sync, the posture reports now show all the correct policies getting matched.
Lesson Learnt there!
Mario

Application Configuration changes not showing in Portal

Hello Guru's,
We are on EP 7.02 and EhP6 on backend.
We are using WDA based ESS Applications.
We have a requirement to hide Directory and Index tabs on ESS Homepage .
So followed the below steps to do the same:
1. SE80 - FPM_OVP_COMPONENT
2. Application HRESS_A_MENU - Application Configuration ZHRESS
3. Start Configurator - and click on Component Configuration to hide the tabs.
4. Done with the changes and modified Overview page in Portal to have the new Aplication Configuration.
The issue is, for me it is working fine, it is hiding the tabs and showing only the Map. But for other users it is showing all the tabs Map, Directory, and Index.
Please help. And also when a user does personalization in Portal where do the changes go ?
Thanks,
Pramod

Hi Pramod,
How were you able to solve this issue. I am having the same problem. I did the Z copy for all the standard configuration and assigned the custom role ZESS to ZHRESS_CC_MENU_AREA_GROUP. When i change the the options in general settings to invisible for MAP and Index , I can see the tabs getting hidden in the preview mode.In portal the changes are not getting reflected. You said about enhancement. Could you please explain what you did ? . Your help is greatly appreciated.
Thanks,
Vishnu

Updated Latest End Time in workflow builder but change not taking place

Hello everyone,
In our existing leave application workflow (working fine for many years), we have set a deadline monitoring of Work Item Creation (WIS) + 10 days to send an email back to the applicant if his or her leave application wasn't acted upon by his/her supervisor.
Recently we have made some changes to the leave program and are required to test this deadline monitoring. In development environment instead of waiting for 10 days, we updated the Time field in the Latest End tab to 3 mins and then we generate and activate the workflow (through the Activation submenu in the Workflow menu).
Problem 1: But when the leave program generate the work item, inside the work item the Latest End date and time still show as WIS + 10 days, instead of WIS + 3 mins. We have already run SWU_OBUF and also refresh the organizational environment through SWUS but still to no avail.
Problem 2: When we change the Latest End date of the workitem to trigger the deadline monitoring, nothing happens even though the deadline monitoring batch job (SWWCOND & SWWDHEX) is already running successfully every 3 mins. In the executed action it just show 'Deadline reached' and the work item is in READY status.
In our work flow we have the process control to set the work item to obsolete. Really appreciate for any advice. Thanks.

Hi Rick,
Sorry, wrong choice of word. What i'm trying to say is as we don't have a workflow expert on our site, me and my colleague were a bit hesitant to manually change the work item deadline. But i see the benefit in doing that. At least now we know that changing the work item deadline would not affect the triggering of the deadline monitoring.
Hi Viji,
We haven't tied the changed workflow template to any transport request yet as we wanted to test it out in development environment first.
Sorry but how do i check if the outcome is active?
Hi Rob,
We didn't do any import. Since we're testing the changes in dev, we're directly changing the workflow template and activating it without tagging it to any transport request. But thanks for letting us know about table HRS1205, will give it a look tomorrow afternoon.
And also we're generating new work item for our testing. That's why we were surprise the new work item is still not picking up the WIS+3 mins latest end date.

Keyboard layout not taking affect in password boxes

I recently switched to the Dvorak layout on my iMac. Almost immediately, I noticed that this change did not affect when I was typing a Mac system password or Keychain password (I had to type the passwords as I used to, not the way I would expect to have to type them under the new layout).
This seemed strange to me, but I didn't worry much, just took it as a sign that I'd have to type passwords in QWERTY all the time. I speculated that perhaps passwords were stored as keystrokes, rather than as the characters that these keystrokes represented.
However, after a system reboot, my passwords stopped working again, and I figured out that now I had to type them in Dvorak, after all. This still wasn't too bad, I just assumed that the system needed to restart before Dvorak was fully added, and now it would work as expected.
Here's the really strange thing I just noticed: when I just changed back to QWERTY momentarily, my passwords were still working as typed in Dvorak! Changing the layout has stopped affecting the password fields again.
So, can anyone tell me how this works? The only thing I can think is this: maybe whatever keyboard layout you had when you logged in (and, thus, the one you had when you last logged out) is the one you are stuck with for the entire session until you log out? Does this really make sense? Or is something else causing this strange behavior?

Hi Darkxsun, and Welcome to Apple Discussions!
I found this ..
"During system boot, holding down modifier keys such as "C" to boot off of CD, "T" to boot in firewire target disk mode, etc. appear to be hard coded to their Qwerty positions on your keyboard. Some reports suggest that choosing Dvorak as your default layout at system install time may remedy this situation."
.. and wondered if the same may be true of your password anomalies.
This was from here .. http://www.chimoosoft.com/articles/dvorak.php
I hope it helps!
Regards,
Robert.

Printing Paper Changes not Taking Effect

Hi,
I recently upgraded to Windows 7 from XP and I also have Acrobat 9 Pro installed.
When I use a different size page, in this case 11x18, and go to print it will start out as our printer default 8 1/2x11 which is should be. I would then proceed to go to the printer preferences and change the paper size and click "ok" to get back to the main print page where I would notice that the print preview would not update ot the new size. If I proceed to print with it showing the 8 1/2x11, even though it is set to 11x18, it would scale it to the 8 1/2 x11. What I have found to work around it is if I click and then unclick the button "Choose Paper Source by PDF Page Size" it would scale the paper to the correct size. I use different size paper and do not want to change the default size.
This is sort of a hassle and I sometimes notice that when I'm going from 11x17 to 23x20 it would not even update and would not allow me to print on the correct paper size.
I am using a sharp AR-M207 printer. I have tried to use the PCL/PS/PPD drivers for the latest version and they all have the same effect. Additionally Acrobat 9 Pro is also up to date.
Is there an update or a patch somewhere or another reason why this is occuring. I am not included to switch printer mainly because I do need a large format printer and its difficult to find one.
Thanks,

Daniel,
Yes I am currently using the most recent version of Acrobat and Printer Drivers.
I have not tried the Help > Repair option. I actually noticed that this issue occurs on my laptop as well, same operating system (Windows 7). It is possibly an issue because of compatability with Windows 7 although there might be a workaround for it.
I have tried a different printer, ie my laptop, and the same problem occured.
I can look for outdated Sharp print drivers but that might be difficult to find.
Also I currently use Windows 7 64bit.

Volume changes not taking effect in nested sequence

Sometimes when I make volume changes to a clip in a sequence the change does not carry over to the master sequence that the original is nested in. What am I doing wrong? I am double clicking on the nested sequence in the master sequence to open it before I make the change to it.
Mac OS X (10.3.8)

I'm not sure it applies to your case, but I had similar problems with video rendering: changes to the nested sequence sometimes didn't appear in the nesting sequence, and attempt to render didn't work because ... there was nothing to render according to FCE.
Then I forced FCE to render: I first selected the nested sequence (in the main sequence), then I first applied "Disable Clip" (contextual menu) and then "Enable Clip", and finally the render bar changed to red (or orange), meaning it needed rendering. I rendered, and all changes in the nested sequence appeared in the nesting sequence as well.
Maybe it works also with volumes in your case...
Piero

Configuration changes not taking affect

Similar Messages

Maybe you are looking for